Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Hydrothermal catalysis of waste greases into green gasoline, jet, and diesel biofuels in continuous flow supercritical water

Production of green gasoline, jet, and diesel biofuels from waste greases was achieved using a novel hydrothermal, continuous-flow catalytic process operating under supercritical water conditions, with recycled water the only added chemical. Thermally and chemically stable catalysts were explored to optimize yields of liquid biofuels and to minimize production of gases and acidic compounds. A 50:50 mixture of brown and yellow waste greases converted into 76.6 wt% liquid biocrude (BC); the remainder converted to water and gases. Less than 0.2% of the FS formed carbon char (mainly amongst catalyst particles). Various tubular reactors (Inconel, ® Hastelloy®, titanium, stainless) showed no interior defects, erosion, or mass loss after runs. Here, the titanium catalyst was fully recovered and regenerated back to its original potency. The BC was further refined into 28%, 48%, 20%, and 4 wt%, respectively for green gasoline, jet, diesel, and bunker. Biofuels were analyzed for compound class compositions and reaction mechanisms were proposed. The hundreds of identified fuel products (C3-C35) from processing oleic acid as a pure model compound were identified. The neat green gasoline and diesel biofuels along with a 50% green jet blend (with petroleum Jet A) were tested in appropriate spark ignition, turbine, and diesel engines at University of MN Engine Labs. Biofuels achieved 107.7%, 97.2%, and 101.3% engine power performance levels relative to petroleum fuels (91-Octane, Jet A, #2 Diesel) along with lower CO and pollutant emissions. Biofuels passed ASTM fuel specifications (D4814, D7566, D975) including mandated corrosion and low sulfur limits of all three biofuels.

09 BIOMASS FUELS↗
DOE OSTI2024

Advanced multimaterial shape optimization methods as applied to advanced manufacturing of wind turbine generators

Abstract Currently, many utility‐scale wind turbine generator original equipment manufacturers are dependent on imported rare earth permanent magnets, which are susceptible to market risks from cost instability. To lower the production costs of these generators and stay competitive in the market, several small wind manufacturers are pursuing continuous improvements to both generator design and manufacturing. However, traditional design and manufacturing methods have yielded marginal improvements in wind power performance. This work presents novel methods to redesign a baseline 15‐kW wind turbine generator with reduced rare‐earth permanent magnets by leveraging cutting‐edge three‐dimensional (3D) printed polymer‐bonded permanent magnets and steel. Symmetric, asymmetric, and multimaterial‐magnet parametrization methods are introduced for shape optimization. We extend the symmetric and asymmetric methods to the back iron in the stator to further investigate the impact and opportunities for performance improvements with lesser active materials. We employ a design‐of‐experiments approach with parametric computer‐aided design for shape generation and evaluate different designs by magneto‐thermal modeling and finite‐element analysis. We use adaptive sampling technique to identify better performing designs with lesser magnet mass, higher efficiency, and lower cogging torque when compared with the baseline generator. Asymmetric pole designs resulted in a magnet mass in the range of 4.77–5.37 kg, which was 27%–35% lighter than the baseline generator, suggesting that a new design freedom exists that can be enabled by advanced manufacturing, such as 3D printing. Shaping the back iron in the stator resulted in material savings in electrical steel of up to 14.62 kg, which was 20% lighter than the baseline stator. We conducted a structural analysis to evaluate an optimized asymmetric rotor design from the point of view of mechanical integrity and air‐gap stiffness. The magnetically optimal shape profile was shown as having a positive impact on the radial stiffness, and an optimal solution was discovered to reduce the structural mass by nearly 30 kg, which was 29% lighter than the baseline.

17 WIND ENERGY↗
DOE OSTI2024

The phase space distance between collider events

How can one fully harness the power of physics encoded in relativistic N-body phase space? Topologically, phase space is isomorphic to the product space of a simplex and a hypersphere and can be equipped with explicit coordinates and a Riemannian metric. This natural structure that scaffolds the space on which all collider physics events live opens up new directions for machine learning applications and implementation. Here we present a detailed construction of the phase space manifold and its differential line element, identifying particle ordering prescriptions that ensure that the metric satisfies necessary properties. We apply the phase space metric to several binary classification tasks, including discrimination of high-multiplicity resonance decays or boosted hadronic decays of electroweak bosons from QCD processes, and demonstrate powerful performance on simulated data. Our work demonstrates the many benefits of promoting phase space from merely a background on which calculations take place to being geometrically entwined with a theory’s dynamics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Rational Design and Synthesis of Hierarchical Porous Mn–N–C Nanoparticles with Atomically Dispersed MnNx Moieties for Highly Efficient Oxygen Reduction Reaction

Developing transition-metal excluding iron and cobalt–nitrogen–carbon (M–N–C) electrocatalysts for the oxygen reduction reaction (ORR) is critical to substantially promote the development of precious-metal-free metal–air batteries and fuel cells. In the work, Mn–N–C nanoparticles with atomically dispersed MnNx moieties were synthesized by pyrolyzing Mn-ion–dual-pyridine coordinated complex, which was obtained via a simple condensation reaction between 2,6-diamino-pyridine and 2,6-diacetyl-pyridine with MnCl 2 as the Mn source. The precursor features with a characteristic structure of dual-pyridine ligand, which possesses a strong coordinating capability for Mn 2+ , facilitating the formation of highly dispersed nitrogen-coordinated Mn sites (MnN x ). Attributed to the highly active atomic MnN x sites, hierarchical pore structure, and high surface area of the Mn–N–C derived from the new precursor, it exhibits outstanding ORR performance in 0.1 M KOH with an almost direct four-electron reaction path and high selectivity of O 2 into H 2 O (low H2O2 production <3.5%). The half-wave potential of Mn–N–C is 0.88 V vs RHE, which is 20 mV higher than that of commercial Pt/C catalyst and reaches to the level of Fe–N–C catalyst obtained by the same method. Meanwhile, the feasibility of Mn–N–C for practical application is validated by its higher-performance power output in Zn–air battery with a maximum power density of 132 mW cm –2 compared to that of Pt/C (121 mW cm –2 ) using the same catalyst loading of 1.0 mg cm –2 . This work develops a convenient route to develop non-Fe or Co–N–C electrocatalyst for the ORR.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reduced trap state density in AlGaN/GaN HEMTs with low-temperature CVD-grown BN gate dielectric

In this Letter, low-temperature (400 °C) chemical vapor deposition-grown boron nitride (BN) was investigated as the gate dielectric for AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs) on a Si substrate. Comprehensive characterizations using x-ray photoelectron spectroscopy, reflection electron energy loss spectroscopy, atomic force microscope, high-resolution transmission electron microscopy, and time-of-flight secondary ion mass spectrometry were conducted to analyze the deposited BN dielectric. Compared with conventional Schottky-gate HEMTs, the MISHEMTs exhibited significantly enhanced performance with 3 orders of magnitude lower reverse gate leakage current, a lower off-state current of 1 × 10−7 mA/mm, a higher on/off current ratio of 108, and lower on-resistance of 5.40 Ω mm. The frequency-dependent conductance measurement was performed to analyze the BN/HEMT interface, unveiling a low interface trap state density (Dit) on the order of 5 × 1011–6 × 1011 cm−2 eV−1. This work shows the effectiveness of low-temperature BN dielectrics and their potential for advancing GaN MISHEMTs toward high-performance power and RF electronics applications.

Physics↗
DOE OSTI2025

Resimulation-based self-supervised learning for pretraining physics foundation models

Self-supervised learning (SSL) is at the core of training modern large machine learning models, providing a scheme for learning powerful representations that can be used in a variety of downstream tasks. However, SSL strategies must be adapted to the type of training data and downstream tasks required. We propose resimulation-based self-supervised representation learning (RS3L), a novel simulation-based SSL strategy that employs a method of resimulation to drive data augmentation for contrastive learning in the physical sciences, particularly, in fields that rely on stochastic simulators. By intervening in the middle of the simulation process and rerunning simulation components downstream of the intervention, we generate multiple realizations of an event, thus producing a set of augmentations covering all physics-driven variations available in the simulator. Using experiments from high-energy physics, we explore how this strategy may enable the development of a foundation model; we show how RS3L pretraining enables powerful performance in downstream tasks such as discrimination of a variety of objects and uncertainty mitigation. In addition to our results, we make the RS3L dataset publicly available for further studies on how to improve SSL strategies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Accelerating Manufacturing of Powder-Processed Strong, Lightweight and Thermally Stable Bulk Nanocrystalline Al Alloys via Engineered Interface States

The overarching goal of this program is to develop an integrated materials by design framework enabling a simple, scalable, and efficient manufacturing route for thermally stable nanocrystalline Al-based alloys with high specific strength over a range of service temperatures. The central scientific principle underpinning this program is the elucidation, and ultimately implementation in novel alloy design, of unique interfacial structures and chemistries driven by segregation in multi-component systems that give rise to unprecedented processability and properties. This program targeted nanocrystalline Al-based ternary alloys produced by mechanical alloying of powders followed by compaction and sintering with hot pressing, which are inherently scalable and inexpensive manufacturing routes, but when applied to nanocrystalline alloys are usually plagued by low density and/or poor retention of the intended nanostructures during processing. This program successfully demonstrated manufacturing of a bulk (>1 cm 3 ) nanocrystalline Al-based alloy with a combination of thermal stability, high temperature strength retention, and specific strength that exceeds the current-state-of-the-art of Al alloys. It is anticipated that the greatest technological impact will occur by demonstration of rapid and scalable manufacturing of bulk nanocrystalline Al alloys with exceptional thermal stability and mechanical performance, thus enabling increased energy efficiency in high performance power generation systems via: (i) replacement of existing components with lightweight Al-based alloys and (ii) increasing operating temperatures with property retention. The program focused on the development of a simple and efficient manufacturing route for thermally stable nanocrystalline Al-based alloys with high specific strength over a range of service temperatures. The program is expected to have direct impact on scalable and economic manufacturing of bulk nanocrystalline alloys. This program profited from the recent discovery by the project team of segregation-driven amorphous intergranular films in nanocrystalline metallic alloys that can be kinetically frozen-in at sub-solidus temperatures. These interfacial states (also known as amorphous complexions) comprise a large fraction of the total material in nanocrystalline alloys and are responsible for two beneficial characteristics that anchor the proposed work: (1) activated sintering leading to high density and (2) retained nanostructures leading to high strengths that approach a substantial fraction of the theoretical limit. More specifically, these engineered interfaces led to a three-fold benefit: (i) high-throughput materials processing with low energy budget and cost, (ii) exceptional thermal stability, and (iii) high specific strength at both room temperature and intermediate temperatures experienced during service.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Contextual modeling and Bayesian Optimization for Improved Injection at the Fermilab Booster

The Fermilab accelerator complex delivers high-intensity proton beams to serve the lab’s neutrino, muon, and fixed-target programs. A normal-conducting Linac accelerates H− beam to 400 MeV and injects into the Booster rapid cycling synchrotron via charge exchange, which accelerates protons to 8 GeV. Injection from the Linac into the Booster is a critical area for high-power performance of the Fermilab proton complex. The Booster is a high-intensity proton ring with extreme space-charge forces which necessitates precise control over the beam losses through the acceleration cycle. The main challenge for the reliability of Booster performance is compensating for drifting conditions in the beam from the Linac, which can drift daily in energy by up to O(1) MeV w.r.t. design. Drifts in Linac orbit and energy must be corrected to match the Booster, while simultaneously accommodating interdependent drifts in transverse and longitudinal beam quality. Operationally, compensation for these changes is addressed by manual tuning of the Linac output energy and/or Booster acceptance, which can be inefficient and time-consuming. This works describes contextual Bayesian Optimization for injection tuning that takes into account the state of Linac beam via information from instrumentation in the injection line (Beam position monitors (BPMs), beam loss monitors (BLMs), wire scanners for transverse profiles (WSs)), as well as RF cavity setting parameters from the Linac.

Sharankova, R. [Fermilab] (ORCID:000000027014593X)↗
DOE OSTI2023

Improving robustness for model discerning synthesis process of uranium oxide with unsupervised domain adaptation

The quantitative characterization of surface structures captured in scanning electron microscopy (SEM) images has proven to be effective for discerning provenance of an unknown nuclear material. Recently, many works have taken advantage of the powerful performance of convolutional neural networks (CNNs) to provide faster and more consistent characterization of surface structures. However, one inherent limitation of CNNs is their degradation in performance when encountering discrepancy between training and test datasets, which limits their use widely. The common discrepancy in an SEM image dataset occurs at low-level image information due to user-bias in selecting acquisition parameters and microscopes from different manufacturers. Therefore, in this study, we present a domain adaptation framework to improve robustness of CNNs against the discrepancy in low-level image information. Furthermore, our proposed approach makes use of only unlabeled test samples to adapt a pretrained model, which is more suitable for nuclear forensics application for which obtaining both training and test datasets simultaneously is a challenge due to data sensitivity. Through extensive experiments, we demonstrate that our proposed approach effectively improves the performance of a model by at least 18% when encountering domain discrepancy, and can be deployed in many CNN architectures.

scanning electron microscopy↗
DOE OSTI2025

High-Voltage Pulsed Power Generator for Beam Injection Systems

Beam injection systems in hadron colliders require kickers generating ±50 kV peak voltages into a 50 Ω impedance, with peak currents of 1000 A and sub-10 ns rise and fall times. This paper presents a novel high-voltage pulse power generator utilizing a distributed pulser architecture. It combines gallium nitride (GaN) transistors in a Marx topology with an inductive adder, achieving nanosecond-scale switching speeds and high-power efficiency. Compared to other solutions such as based on MOSFETs or fast ionization dynistors, our development offers superior peak and average power performance, reduced system complexity, and enhanced reliability, marking a significant step forward in high-voltage pulse generation for accelerator applications.

Smirnov, Alexander (ORCID:0000000280631691)↗
DOE OSTI2023

A Modeling Toolkit for Comparing AC and DC Electrical Distribution Efficiency in Buildings

Recently, there has been considerable research interest in the potential for DC distribution systems in buildings instead of the traditional AC distribution systems. Due to the need for performing power conversions between DC and AC electricity, DC distribution may provide electrical efficiency advantages in some systems. To support comparative evaluations of AC-only, DC-only, and hybrid AC/DC distribution systems in buildings, a new modeling toolkit called the Building Electrical Efficiency Analysis Model (BEEAM) was developed and is described in this paper. To account for harmonics in currents or voltages arising from nonlinear devices, the toolkit implements harmonic power flow, along with nonlinear device behavioral descriptions derived from empirical measurements. This paper describes the framework, network equations, device representations, and an implementation of the toolkit in an open source software package, including a component library and graphical interface for creating circuits. Simulations of electrical behavior and device and system efficiencies using the toolkit are compared with experimental measurements of a small office environment in a variety of operating and load configurations. A detailed analysis of uncertainty estimation is also provided. Key findings were that a comparison of predicted versus measured efficiencies and power losses in the validation testbed using the initial toolkit implementation predicted device- and system-level efficiencies with reasonably good accuracy under both balanced and unbalanced AC scenarios. An uncertainty analysis also revealed that the maximum estimated error for system efficiency across all scenarios was 3%, and measured and modeled system efficiency agreed within the experimental uncertainty in approximately half of the scenarios. Based on the correspondence between simulation and measurement, the toolkit is proposed by the authors as a potentially useful tool for comparing efficiency in AC, DC, and hybrid AC/DC distribution systems in buildings.

DC distribution↗
NASA NTRS1971

Measurements of plasma parameters in a simulated thermionic converter

Cesium-filled thermionic energy converters are examined as candidate electrical energy sources in spacecraft requiring tens to hundreds of kilowatts of electric power. The high operating temperatures necessary for a large specific power and high efficiency inevitably impose stringent constraints on the converter fabrication to achieve the desired reliability of the power system. The converter physics for reducing operating temperatures and cesium plasma losses are studied to achieve high reliability without sacrificing the power performance of the converters. Various cesium parameters which affect the converter performance are: (1) electron temperatures, (2) plasma ion densities, and (3) electric potential profiles. These were investigated using a Langmuir probe in a simulated converter. The parameters were measured in different cesium discharge modes.

Shimada, K.↗
NASA NTRS1972

Probe measurements of a cesium plasma in a simulated thermionic energy converter

Cesium-filled thermionic energy converters are considered as electrical energy sources in future spacecraft requiring tens to hundreds of kilowatts of electric power. The high operating temperatures necessary for a large specific power and high efficiency impose stringent constraints on the converter fabrication. The converter physics for reducing operating temperatures and cesium plasma losses are being studied to achieve high reliability without sacrificing the power performance of the converters. Various cesium parameters which affect the converter performance are: (1) electron temperatures, (2) plasma ion densities, and (3) electric potential profiles. These were investigated using a Langmuir probe in a simulated converter. The parameters were measured in different cesium discharge modes.

Shimada, K.↗
NASA NTRS1971

Simulation of ERTS RBV imagery.

Based on the signal-to-noise ratio, modulation transfer function (MTF), and light transfer characteristics of the return-beam vidicon (RBV) multispectral three-camera subsystem, developed for use on earth resources technology satellites (ERTS), an analytical prediction of the resolvability of ground targets was made as a function of target size, contrast, spectral distribution, and radiance level. To determine whether the analysis was correct, U.S. Air Force targets with various contrasts were utilized to simulate those contrasts and radiance levels that the RBV cameras would see in the actual ERTS scenes. Although the RBV camera used in this test had a somewhat lower signal-to-noise ratio than the flight cameras, the simulation still proved the validity of the theoretical analysis in predicting resolving power performance for any set of input parameters.

Weinstein, O.↗
NASA NTRS1972

High resolution multispectral camera system for ERTS A & B.

A very-high resolution multispectral television camera system is being developed for use on the earth resources technology satellite (ERTS) program. There are three cameras in the system, each viewing the same area but operating in the blue-green, red, and near-infrared spectral bands. In the laboratory the cameras' limiting resolution is 4500 TV lines over the 25 + 25-mm image format of the return beam vidicon (RBV). A model was developed to predict the resolving power performance of the RBV camera under realistic conditions. To verify the model, tests were conducted using the RBV camera, a laser-beam image reproducer and a series of AF tribar test patterns of known values of contrast. As a more graphic demonstration, simulated multispectral images were generated using color-IR photographs from Apollo 9. The measured signal-to-noise, resolution, and spectral characteristics of the ERTS Flight A and Flight B three-camera systems are presented in conclusion.

Miller, B. P.↗