Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Machine learning technique to identify grains in polycrystalline materials samples

A method of identifying grains in polycrystalline materials, the method including (a) identifying local crystal structure of the polycrystalline material based on neighbor coordination or pattern recognition machine learning, the local crystal structure including grains and grain boundaries, (b) pre-processing the grains and the grain boundaries using image processing techniques, (c) conducting grain identification using unsupervised machine learning; and (d) refining a resolution of the grain boundaries.

Sankaranarayanan, Subramanian↗

Structural, optical and magnetic properties of polycrystalline BaTi{sub 1-x}Fe{sub x}O{sub 3} ceramics

Polycrystalline BaTi{sub 1-x}Fe{sub x}O{sub 3} ceramics have been prepared by conventional solid-state reaction. Their structural, optical and magnetic properties are then studied by means of x-ray diffraction (XRD), Raman scattering (RS) and absorption spectrometers, and a physical properties measurement system. Detailed analyses of XRD patterns and RS spectra reveal the phase separation of the tetragonal-hexagonal structure at a threshold concentration of x = 0.005. The increase in the Fe-doping content (x) leads to development of the hexagonal phase. Magnetic measurements prove that many BaTi{sub 1-x}Fe{sub x}O{sub 3} samples exhibit the room-temperature ferromagnetic order, excepting the samples with x = 0.02-0.06. The ferromagnetism depends strongly on concentration of Fe impurities. The nature of this ferromagnetism is discussed by means of the results of structural analyses and optical absorption spectra.

36 MATERIALS SCIENCE↗

Validation of thermal models for a prototypical MEMS thermal actuator.

This report documents technical work performed to complete the ASC Level 2 Milestone 2841: validation of thermal models for a prototypical MEMS thermal actuator. This effort requires completion of the following task: the comparison between calculated and measured temperature profiles of a heated stationary microbeam in air. Such heated microbeams are prototypical structures in virtually all electrically driven microscale thermal actuators. This task is divided into four major subtasks. (1) Perform validation experiments on prototypical heated stationary microbeams in which material properties such as thermal conductivity and electrical resistivity are measured if not known and temperature profiles along the beams are measured as a function of electrical power and gas pressure. (2) Develop a noncontinuum gas-phase heat-transfer model for typical MEMS situations including effects such as temperature discontinuities at gas-solid interfaces across which heat is flowing, and incorporate this model into the ASC FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (3) Develop a noncontinuum solid-phase heat transfer model for typical MEMS situations including an effective thermal conductivity that depends on device geometry and grain size, and incorporate this model into the FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (4) Perform combined gas-solid heat-transfer simulations using Calore with these models for the experimentally investigated devices, and compare simulation and experimental temperature profiles to assess model accuracy. These subtasks have been completed successfully, thereby completing the milestone task. Model and experimental temperature profiles are found to be in reasonable agreement for all cases examined. Modest systematic differences appear to be related to uncertainties in the geometric dimensions of the test structures and in the thermal conductivity of the polycrystalline silicon test structures, as well as uncontrolled nonuniform changes in this quantity over time and during operation.

42 ENGINEERING↗

Microstructure, impurity and metal cap effects on Cu electromigration

Electromigration (EM) lifetimes and void growth of pure Cu, Cu(Mn) alloy, and pure Cu damascene lines with a CoWP cap were measured as a function of grain structure (bamboo, near bamboo, and polycrystalline) and sample temperature. The bamboo grains in a bamboo-polycrystalline grained line play the key role in reducing Cu mass flow. The variation in Cu grain size distribution among the wafers was achieved by varying the metal line height and wafer annealing process step after electroplating Cu and before or after chemical mechanical polishing. The Cu grain size was found to have a large impact on Cu EM lifetime and activation energy, especially for the lines capped with CoWP. The EM activation energy for pure Cu with a CoWP cap from near-bamboo, bamboo-polycrystalline, mostly polycrystalline to polycrystalline only line grain structures was reduced from 2.2 ± 0.2 eV, to 1.7 ± 0.1 eV, to 1.5 ± 0.1 eV, to 0.72 ± 0.05 eV, respectively. The effect of Mn in Cu grain boundary diffusion was found to be dependent on Mn concentration in Cu. The depletion of Cu at the cathode end of the Cu(Mn) line is preceded by an incubation period. Unlike pure Cu lines with void growth at the cathode end and hillocks at the anode end of the line, the hillocks grew at a starting position roughly equal to the Blech critical length from the cathode end of the Cu(Mn) polycrystalline line. The effectiveness of Mn on Cu grain boundary migration can also be qualitatively accounted for by a simple trapping model. The free migration of Cu atoms at grain boundaries is reduced by the presence of Mn due to Cu-solute binding. A large binding energy of 0.5 ± 0.1 eV was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Transport Properties of Dense Polycrystalline Clathrate-II (K,Ba)16(Ga,Sn)136 Synthesized by a New Approach Employing SPS

Tin clathrate-II framework-substituted compositions are of current interest as potential thermoelectric materials for medium-temperature applications. A review of the literature reveals different compositions reported with varying physical properties, which depend strongly on the exact composition as well as the processing conditions. We therefore initiated an approach whereby single crystals of two different (K,Ba)16(Ga,Sn)136 compositions were first obtained, followed by grinding of the crystals into fine powder for low temperature spark plasma sintering consolidation into dense polycrystalline solids and subsequent high temperature transport measurements. Powder X-ray refinement results indicate that the hexakaidecahedra are empty, K and Ba occupying only the decahedra. Their electrical properties depend on composition and have very low thermal conductivities. The structural and transport properties of these materials are compared to that of other Sn clathrate-II compositions.

36 MATERIALS SCIENCE↗

A macro-scale ruck and tuck mechanism for deformation in ion-irradiated polycrystalline graphite

A vein structure, which becomes more pronounced with increasing ion dose, was found on the surface of polycrystalline HOPG (highly oriented pyrolytic graphite) implanted by ex situ C + (up to 1.8 × 10 17 ions/cm 2 ), and in situ Ar + in a transmission electron microscope (TEM). These veins are found to be independent of the crystallographic orientations and are associated with the formation of pores. Underneath the veins, a triangular-shaped core was formed with the graphite platelet inside the core displaced up towards the surface. A macro-scale ‘ruck&tuck’ geometry was thus generated at these triangle structure boundaries. Progressive movement of dislocations along basal planes during irradiation was observed, and a mechanistic model was proposed on this basis to explain the vein formation. A small increase of c-spacing was observed with irradiation but it is believed that macro-scale vein formation plays a more vital role in the dimensional and property changes in polycrystalline graphite, especially when a stress gradient is present. Here, the model proposed also explains the change of thermal expansion in HOPG with irradiation. Together with Heggie’s ‘ruck&tuck’ and Barsoum’s ‘ripplocations’ models, the present model is considered to have provided an additional experimentally proven mechanism responsible for irradiation behaviour in graphite materials.

36 MATERIALS SCIENCE↗

Effects of the d-donor level of vanadium on the properties of Zn1−xVxO films

We report the effect of d-levels of vanadium atoms on the electronic band structure of ZnO. Polycrystalline layers of Zn1−xVxO with 0 ≤ x ≤ 0.08 were synthesized using magnetron sputtering technique. Electrical measurements show that electron concentration increases with vanadium up to x = 0.04 and then decreases and films become insulating for x > 0.06. Optical characterization reveals that the absorption edge shifts to higher energy, while the photoluminescence (PL) peak shows a shift to lower energy with increasing vanadium content. This unusual optical behavior can be explained by an anticrossing interaction between the vanadium d-levels and the conduction band (CB) of ZnO. The interaction results in an upward shift of unoccupied CB (E+) and the downward shift of the fully occupied E− band derived from the vanadium d-levels. The composition dependence of optical absorption edge (E+) and PL peak (E−) can be fitted using the Band Anticrossing model with the vanadium d-level located at 0.13 eV below CB of ZnO and a coupling constant of 0.65 eV.

García-Hemme, E.↗

Effect of solvent ratio on the optoelectronic properties of fluorine doped tin oxide thin films

Fluorine doped tin oxide (FTO) thin films were deposited on to the well cleaned microscopic glass substrates using nebulized-spray pyrolysis (n-SP) technique by varying the water to ethanol solvent proportion. The deposited thin films were characterized by X-ray diffraction (XRD), UV-Vis-NIR spectroscopy, field emission scanning electron microscopy and Hall measurements to study the structural, optical, surface morphological and electrical properties of the films, respectively. Results of the analyzes show that the films are polycrystalline, having tetragonal structure with the preferred orientation along (110) plane. The grain size varies between 7 to 20 nm. The optimized films exhibit the optical transparency of 85 % at the wavelength of 580 nm. The optical bandgap lies in the range of 3.94 to 4 eV. The optimized films, deposited with 40 % of ethanol proportion are having the mean resistivity 4.72×10{sup −3} Ω-cm, carrier concentration 1.79×10{sup 20} cm{sup 3} and the mobility 7 cm{sup 2}/Vs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron diffraction study of phase transitions in perovskite-type strontium molybdate SrMoO{sub 3}

The structure of a polycrystalline sample of SrMoO{sub 3} has been investigated using powder neutron diffraction from 5 to 300 K, to reveal two structural phase transitions, the first from the cubic Pm3-barm structure with a=3.97629(3) A to a tetragonal structure in I4/mcm near 266 K and the second to an orthorhombic Imma phase below 125 K. The average Mo-O distance is essentially independent of temperature. The temperature dependence of the octahedral tilting appears typical of a tricritical phase transition. - Graphical abstract: Variable temperature neutron diffraction measurements of SrMoO{sub 3} from 5 K to room temperature show the presence of two phase transitions associated with tilting of the octahedra. On cooling, the structure transforms from cubic (Pm3-barm) to tetragonal (I4/mcm) and ultimately orthorhombic (Imma).

36 MATERIALS SCIENCE↗

Ultrafast x-ray diffraction of high-pressure phases in dynamically compressed TiO 2

Here, we investigate the high-pressure polymorphism of Ti⁢O 2 under laser-shock compression from 54(5) to 137(7) GPa using in situ femtosecond x-ray diffraction. Our results provide experimental evidence of the 𝑃⁢𝑐⁢𝑎⁢2 1 -type distorted fluorite structure formed from polycrystalline Ti⁢O 2 dynamically compressed to 54(5) GPa. Upon higher compression, we observe the direct formation of the ninefold coordinated F⁡e 2 ⁢P-type phase at 68(4) and 78(3) GPa in polycrystalline and [001]-oriented Ti⁢O 2 , respectively. This represents an unprecedented 100 GPa reduction in the shock synthesis pressure of the F⁡e 2⁢ P-type structure relative to quasihydrostatic loading conditions. On pressure release, the F⁡e 2⁢ P-type phase transforms to the α-Pb⁢O 2 structure and, at later times, reverts to rutile. Thus, the rutile →F⁡e 2⁢ P and α-Pb⁢O 2 →rutile transformations are both observed to occur on nanosecond timescales. Our results highlight the unique ability of high-strain-rate uniaxial compression to synthesize novel high-pressure phases and also indicate the importance of in situ atomic-level probes in developing pressure-temperature phase diagrams.

Crystal structures↗

Effects of He Irradiation on Yttria-Stabilized Zirconia Ceramics

Here we study the effects of He irradiation on polycrystalline yttria-stabilized zirconia (YSZ), with the focus on irradiation-induced damage buildup, He behavior, and volume swelling. The evolution of irradiation-induced structural damage in polycrystalline YSZ, which is independent of grain orientation, is described by a multistep damage accumulation model. We found a three-step damage evolution process, and we observed different types of defects in the different damage steps. Compared with single-crystal YSZ, the second damage step occurs at a lower dose in polycrystalline YSZ due to the initial defects and strain. The implanted He ions are readily trapped along the grain boundaries and the mobility of He ions is greatly increased. The enhanced He mobility along the grain boundary leads to a lower threshold irradiation dose and a larger penetration depth for bubble formation. Similar morphologies are observed for the He bubbles in the polycrystalline YSZ is not influenced by grain orientation. Lastly, as both the extended defects and He bubbles can induce volume swelling, the variation in volume swelling as a function of dose can be divided into a two stage process.

36 MATERIALS SCIENCE↗

Isomorphous substitution of europium for strontium in the structure of synthetic hydroxovanadate

Polycrystalline strontium-europium hydroxovanadates Sr{sub 10-x}Eu{sub x}(VO{sub 4}){sub 6}(OH){sub 2-x}O{sub x} were synthesized and studied by X-ray powder diffraction, infrared absorption and diffuse-reflectance spectroscopies and also thermogravimetry. The single-phase region of isomorphous substitution of Eu for Sr in hydroxovanadate has been found to lie in the compositional interval 0{<=}x{<=}0.18 at 800 deg. C. Refinement of X-ray diffraction (XRD) patterns by the Rietveld method shows that Eu substitutes for Sr preferentially at the Sr(1) sites of the apatite structure. The substitution results in a more uniform distribution of Sr-O bond lengths in coordination polyhedra both around Sr (1) and Sr (2) sites and also in a slight contraction of the vanadate anion VO{sub 4}{sup 3-}. Synthetic Sr hydroxovanadates absorb a considerable amount of water in two forms: capillary condensed and chemically combined. The latter form may be absorbed at temperatures as high as 500 deg. C. - Graphical abstract: The results of this paper contribute to a general picture of substitution effects of the rare-earth (RE) elements in the apatite structure. The dependence of the substitution limit x{sub max} in Sr{sub 10-x}RE{sub x}(VO{sub 4}){sub 6}(OH){sub 2-x}O{sub x} on the atomic number of the RE element is shown here with the present data marked with red color.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simple route to synthesize carbon-nanotube/cadmium-sulfide hybrid heterostructures and their optical properties

Multi-walled carbon nanotube/cadmium sulfide hybrid heterostructures were easily synthesized by employing a thermal decomposition of thioacetamide as a sulfide-ion source in an aqueous regime. The resulting cadmium-sulfide phase is comprised of a zinc-blende structure of spherical polycrystalline nanoparticles (cadmium-sulfide nanoclusters) with the subunits of ca. 15 nm, deposited on the nanotube surface. The formation of the cadmium-sulfide nanoparticles with zinc-blende structure (cubic crystal) suggests that the local concentrations of reacting ion species in the vicinity of the nanotube surface are different from those in the reaction solution. The cadmium-sulfide nanoparticles are comprised of a stoichiometrically ideal chemical-composition ratio (cadmium: sulfur=1:1.02) of cadmium and sulfur with the valence states of +2 and -2, respectively. The optical responses of the cadmium-sulfide phase for ultraviolet-visible light and photoluminescence spectroscopes show the proper size-effect and inherent optical properties of the cadmium-sulfide nanoparticles. - Graphical abstract: Transmission electron micrograph observation and electron diffraction pattern analysis of MWCNT/CdS heterostructures, which show that CdS nanoparticles with cubic CdS phase are deposited on the surface of MWCNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Revealing Nanoscale Chemical Heterogeneities in Polycrystalline Mo-BiVO 4 Thin Films

The activity of polycrystalline thin film photoelectrodes is impacted by local variations of the material properties due to the exposure of different crystal facets and the presence of grain/domain boundaries. Here a multi-modal approach is applied to correlate nanoscale heterogeneities in chemical composition and electronic structure with nanoscale morphology in polycrystalline Mo-BiVO 4 . By using scanning transmission X-ray microscopy, the characteristic structure of polycrystalline film is used to disentangle the different X-ray absorption spectra corresponding to grain centers and grain boundaries. Comparing both spectra reveals phase segregation of V 2 O 5 at grain boundaries of Mo-BiVO 4 thin films, which is further supported by X-ray photoelectron spectroscopy and many-body density functional theory calculations. Theoretical calculations also enable to predict the X-ray absorption spectral fingerprint of polarons in Mo-BiVO 4 . After photo-electrochemical operation, the degraded Mo-BiVO 4 films show similar grain center and grain boundary spectra indicating V 2 O 5 dissolution in the course of the reaction. Overall, these findings provide valuable insights into the degradation mechanism and the impact of material heterogeneities on the material performance and stability of polycrystalline photoelectrodes.

36 MATERIALS SCIENCE↗

Formation of polycrystalline-silicon films with hemispherical grains for capacitor structures with increased capacitance

The effect of formation conditions on the morphology of silicon films with hemispherical grains (HSG-Si) obtained by the method of low-pressure chemical vapor deposition (LPCVD) is investigated by atomic-force microscopy. The formation conditions for HSG-Si films with a large surface area are found. The obtained HSG-Si films make it possible to fabricate capacitor structures, the electric capacitance of which is twice as large in comparison to that of capacitors with “smooth” electrodes from polycrystalline silicon.

36 MATERIALS SCIENCE↗

Magnetic and dielectric behavior in YMn{sub 1−x}Fe{sub x}O{sub 3} (x ≤ 0.5)

The role of doping Fe on the structural, magnetic, and dielectric properties of frustrated antiferromagnet YMn{sub 1−x}Fe{sub x}O{sub 3} (x ≤ 0.5) has been investigated. The neutron diffraction analysis shows that the structure of these polycrystalline samples changes from hexagonal phase (space group P6{sub 3}cm) to orthorhombic phase (space group Pnma) for x > 0.2. The frustration parameter decreases with Fe substitution. All the compounds are antiferromagnetic, and the magnetic structure is described as a mixture of Γ3 and Γ4 irreducible representation (IR) in the hexagonal phase, and the ratio of these two IRs is found to vary with Fe doping (x ≤ 0.2). A continuous spin reorientation as a function of temperature is observed in these samples. The magnetic ground state in the orthorhombic phase of the higher doped samples (x ≥ 0.3) is explained by taking Γ1 (G{sub x}C{sub y}A{sub z}) representation of Pnma setting. In YMnO{sub 3} suppression of dielectric constant ε′ is observed below T{sub N} indicative of magnetoelectric coupling. This anomalous behavior reduces in Fe doped samples. The dielectric constant is found to be correlated with the magnetic moment (M) obtained from neutron diffraction experiments and follows a M{sup 2} behavior close to T{sub N} in agreement with Landau theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disorder driven variations in magnetoresistance and planar Hall effect in Bi 2 Te 3 thin films

The degenerately doped sesquichalcogenide Bi 2 Te 3 , a well-known thermoelectric material, has attracted much attention in recent years as a topological insulator in which conducting surface states lead to exotic electronic transport. Here, in this study, we report the observation of anisotropic magnetoresistance (AMR) and planar Hall effect (PHE) in polycrystalline thin films of Bi 2 Te 3 over a broad range of temperature and magnetic field strength. The values of AMR, PHE and the Hall mobility (μ H ) are compared with results of similar measurements on single crystals and epitaxial films of Bi 2 Te 3 , where these properties are understood in the framework of electronic transport in the topologically protected conducting surface states. Our textured polycrystalline films show a robust metallic character with a carrier density (n s ) and mobility μ H of 9×10 20 cm -3 and 16.7 cm 2 V -1 s -1 respectively. This carrier density is higher and the mobility lower by an order of magnitude compared to the reported values of n s and μ H in epitaxial films and single crystals. However, we see a comparable AMR and PHE in our films for which the concept of conducting surface states is ill-defined due to their polycrystallinity and disordered structure. We suggest that an anisotropic backscattering of charge carriers in the strongly spin – orbit coupled electronic states of this heavy-metal-based non-magnetic compound may lead to the measured resistivity anisotropy. The observation of AMR and PHE in polycrystalline films may be important for scalable production of Bi 2 Te 3 based AMR and PHE sensors of magnetic fields.

36 MATERIALS SCIENCE↗