Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance gain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The effect of rotor blade thickness and surface finish on the performance of a small axial flow turbine

An experimental investigation was conducted to determine the effect of blade profile inaccuracies and surface finish on the aerodynamic performance of a 11.13 cm tip diameter turbine. The as-received cast rotor blades had a significantly thicker profile than the design intent and a fairly rough surface finish. Stage test results showed an increase of one point in efficieny by smoothing the surface finish and another three points by thinning the blade profiles to near the design profile. Most of the performance gain between the as-cast thick and the thinned rotor blades both with the same surface finish, was attributed to reduced trailing edge losses of the recontoured blades.

Roelke, R. J.↗
NASA NTRS1982

Axisymmetric and non-axisymmetric exhaust jet induced effects on a V/STOL vehicle design. Part 2: Analysis of results

A wind tunnel investigation, employing a 1/8 scale model in an 11 foot transonic wind tunnel (Mach 0.4-1.4), was conducted to determine the jet effects of several exhaust nozzles on the aeropropulsive performance of a V/STOL fighter design. The force and pressure data show that significant differences in aeropropulsion performance can be expected by varying the exhaust nozzle type, jet area and deflection angle on an underwing nacelle installation. At unvectored conditions, the single expansion ramp nozzles show large performance gains relative to a circular nozzle installation. Additionally, a further drag reduction is realized when the nonaxisymmetric nozzle is vectored through a 10 degree deflection angle. The combined payoff of the vectored nonaxisymmetric nozzle over the baseline circular nozzle installation is equivalent to 25 percent of zero lift drag.

Schnell, W. C.↗
NASA NTRS1982

The CF6 Jet Engine Performance Improvement - Low Pressure Turbine Active Clearance Control

A low pressure turbine (LPT) active clearance control (ACC) cooling system was developed to reduce the fuel consumption of current CF6-50 turbofan engines for wide bodied commercial aircraft. The program performance improvement goal of 0.3% delta sfc was determined to be achievable with an improved impingement cooling system. The technology enables the design of an optimized manifold and piping system which is capable of a performance gain of 0.45% delta sfc.

Beck, B. D.↗
NASA NTRS1982

Development of an LSI maximum-likelihood convolutional decoder for advanced forward error correction capability on the NASA 30/20 GHz program

The particular coding option identified as providing the best level of coding gain performance in an LSI-efficient implementation was the optimal constraint length five, rate one-half convolutional code. To determine the specific set of design parameters which optimally matches this decoder to the LSI constraints, a breadboard MCD (maximum-likelihood convolutional decoder) was fabricated and used to generate detailed performance trade-off data. The extensive performance testing data gathered during this design tradeoff study are summarized, and the functional and physical MCD chip characteristics are presented.

Clark, R. T.↗
NASA NTRS1982

Advanced technologies for turbomachinery systems: An overview

Turbomachinery system components and associated technologies are discussed. Specific technologies reviewed include the compressor, turbine, internal flow analysis methods, combustion, fuels, materials, structures, bearings, seals, and lubrication, dynamics and controls, and instrumentation. Analytical procedures as a path to improved performance are discussed. The strong interaction between the various technologies if turbomachinery performance gains are to be realized is reflected.

Hartmann, M. J.↗
NASA NTRS1982

The Cummins advanced turbocompound diesel engine evaluation

An advanced turbocompound diesel engine program was initiated to improve the tank mileage of the turbocompound engine by 5% over the vehicle test engines. Engine improvements could be realized by increasing the available energy of the exhaust gas at the turbine inlet, incorporating gas turbine techniques into improving the turbomachinery efficiencies, and through refined engine system optimization. The individual and cumulative performance gains achieved with the advanced turbocompound engine improvements are presented.

Hoehne, J. L.↗
NASA NTRS1983

SC3 - A wing concept for supersonic maneuvering

A supersonic wing design concept that overcomes the problems associated with nonlinear inviscid pressure distribution is presented together with a summary of the supporting theoretical and experimental development program. The key design feature is a conical panel supporting a controlled supercritical conical camber (SC3) crossflow expansion and recompression which permits lift on the upper surface to be obtained without producing an adverse pressure gradient or crossflow shock wave strong enough to separate the boundary layer. The role of aerodynamics in the design implementation is discussed, as are the concept development, the initial design validation on a fabricated and tested SC3 design, and the body and canard interaction effect. The design and testing of an isolated wing with a planform and thickness distribution representative of a practical application are described. Wind-tunnel results show that significant performance gains can be obtained for fighter aircraft using this concept.

Mason, W. H.↗
NASA NTRS1984

Advanced components for spaceborne infrared astronomy

The need for improved cryogenic components to be used in future spaceborne infrared astronomy missions was identified. Improved low noise cryogenic amplifiers operated with infrared detectors, and better cryogenic actuators and motors with extremely low power dissipation are needed. The feasibility of achieving technological breakthroughs in both of these areas was studied. An improved silicon junction field effect transistor (JFET) could be developed if: (1) high purity silicon; (2) optimum dopants; and (3) very high doping levels are used. The feasibility of a simple stepper motor equipped with superconducting coils is demonstrated by construction of such a device based on a standard commercial motor. It is found that useful levels of torque at immeasurably low power levels were achieved. It is concluded that with modest development and optimization efforts, significant performance gains is possible for both cryogenic preamplifiers and superconducting motors and actuators.

Davidson, A. W.↗
NASA NTRS1982

Space Shuttle/high energy upper stage capabilities for the 1990's

Possible performance gains and cost reductions available through the evolution of succeedingly larger unmanned, and then manned, orbital transfer vehicles (OTV) as Shuttle upper stages are projected. Future missions could include delivery of 10,000 lb to GEO, planetary missions in the 2000-12,000 lb class, 30-42 ft payloads in the 5000-10,000 lb class, and manned and unmanned satellite servicing by the turn of the century. The vehicles could evolve from the Centaur F vehicle through stages of all-propulsive configurations to aerobraked, fully reusable vehicles. Reusability introduces cost savings and the ability to make plane changes. Furthermore, aerobraking will double the payload capability for round trip journeys to GEO, bringing costs down to $7000/lb.

Teixeira, C.↗
NASA NTRS1984

Mission science value-cost savings from the Advanced Imaging Communication System (AICS)

An Advanced Imaging Communication System (AICS) was proposed in the mid-1970s as an alternative to the Voyager data/communication system architecture. The AICS achieved virtually error free communication with little loss in the downlink data rate by concatenating a powerful Reed-Solomon block code with the Voyager convolutionally coded, Viterbi decoded downlink channel. The clean channel allowed AICS sophisticated adaptive data compression techniques. Both Voyager and the Galileo mission have implemented AICS components, and the concatenated channel itself is heading for international standardization. An analysis that assigns a dollar value/cost savings to AICS mission performance gains is presented. A conservative value or savings of $3 million for Voyager, $4.5 million for Galileo, and as much as $7 to 9.5 million per mission for future projects such as the proposed Mariner Mar 2 series is shown.

Rice, R. F.↗
NASA NTRS1984

General Electric composite ring-disk flywheel: Recent and potential developments

Recent developments of the General Electric hybrid rotor design are described. The relation of the hybrid rotor design to flywheel designs that are especially suitable for spacecraft applications is discussed. Potential performance gains that can be achieved in such rotor designs by applying latest developments in materials, processing, and design methodology are projected. Indications are that substantial improvements can be obtained.

Coppa, A. P.↗
NASA NTRS1948

Concepts and cost trade-offs for land vehicle antennas in satellite mobile communications

Several antenna design concepts, operating at UHF (821 to 825 MHz transmit and 866 to 870 MHz receive bands), with gain ranging between 6 and 12 dBic, that are suitable for land mobile vehicles are presented. The antennas may be used within CONUS and ALASKA to communicate to and from a geosynchronous satellite. Depending on the type of steering mechanism, the antennas are broken down into three categories; (1) electronically scanned arrays with phase shifters, (2) electronically switched arrays with switchable power dividers/combiners, and (3) mechanically steered arrays. The operating characteristics of two of these design concepts, one a conformal antenna with electronic beam steering and the other a nonconformal design with mechanical steering, were evaluated with regard to two and three satellite system. Cost estimates of various antenna concepts were made and plotted against their overall gain performance.

Haddad, H. A.↗
NASA NTRS1985

A computer simulation of the turbocharged turbo compounded diesel engine system: A description of the thermodynamic and heat transfer models

A computer simulation of the turbocharged turbocompounded direct-injection diesel engine system was developed in order to study the performance characteristics of the total system as major design parameters and materials are varied. Quasi-steady flow models of the compressor, turbines, manifolds, intercooler, and ducting are coupled with a multicylinder reciprocator diesel model, where each cylinder undergoes the same thermodynamic cycle. The master cylinder model describes the reciprocator intake, compression, combustion and exhaust processes in sufficient detail to define the mass and energy transfers in each subsystem of the total engine system. Appropriate thermal loading models relate the heat flow through critical system components to material properties and design details. From this information, the simulation predicts the performance gains, and assesses the system design trade-offs which would result from the introduction of selected heat transfer reduction materials in key system components, over a range of operating conditions.

Assanis, D. N.↗
NASA NTRS1986

Multiple Trellis Coded Modulation (MTCM): An MSAT-X report

Conventional trellis coding outputs one channel symbol per trellis branch. The notion of multiple trellis coding is introduced wherein more than one channel symbol per trellis branch is transmitted. It is shown that the combination of multiple trellis coding with M-ary modulation yields a performance gain with symmetric signal set comparable to that previously achieved only with signal constellation asymmetry. The advantage of multiple trellis coding over the conventional trellis coded asymmetric modulation technique is that the potential for code catastrophe associated with the latter has been eliminated with no additional cost in complexity (as measured by the number of states in the trellis diagram).

Divsalar, D.↗
NASA NTRS1987

Error control coding for satellite and space communications

The optical direct detection channel is discussed. It is shown how simple trellis coded modulation can be used to improve performance or increase throughput (in bits per second) without a bandwidth expansion and no performance loss. In fact, a modest performance gain can be achieved. The concentration is on signals derived from the pulse-position modulation format by allowing overlap.

Georghiades, Costas N.↗
NASA NTRS1985

System technology analysis of aeroassisted orbital transfer vehicles: Moderate lift/drag (0.75-1.5), Volume 1B, part 2, study results

A complete compilation of the results from Phase 2 of a study to identify and prioritize the technology payoffs of representative space based mid lift/drag ratio (L/D) aeroassisted orbit transfer vehicles (AOTV) and the cryofueled propulsion subsystem - configuration interactions is presented. Several combinations of basing and launch vehicle options, staging scenarios, missions (delivery, servicing, or manned round trip), and target orbits were considered. Space basing of an AOTV opens up numerous configuration opportunities. The size can exceed the launch vehicle cargo bay envelope by resorting to orbital assembly and the AOTV weight can exceed the launch vehicle capability. With the absence of fully fueled tanks during a ground based launch much lighter gossamer type structures are possible that may result in performance gains. At the Space Station, payload rearranging or manifesting may prove attractive. Several major conclusions regarding aerothermodynamics, aerodynamics, payload manifesting, the propulsion subsystem, and systems issues are discussed.

Source record↗
NASA NTRS1987

Opportunities for PV applications

Workshop members devoted the majority of time to discussing future prospects for technology support of photovoltaic applications. Photovoltaics has provided power for almost every spacecraft launched in the free world in the last 25 years. Over this time, photovoltaics has demonstrated impressive growth in power level, operating lifetime and specific power (W/kg and W/square m). Yet, the current attitude toward this reliable form of space power generation is likely to preclude further dramatic performance gains.

Scott-Monck, John A.↗
NASA NTRS1986

Application of propfan propulsion to general aviation

Recent studies of advanced propfan propulsion systems have shown significant reductions in fuel consumption of 15-30 percent for transport class aircraft. This paper presents the results of a study which examined applying propfan propulsion to General Aviation class aircraft to determine if similar improvements could be achieved for business aircraft. In addition to the potential performance gains, this paper also addresses the cost aspects of propfan propulsion on General Aviation aircraft emphasizing the significant impact that the cost of capital and tax aspects have on determining the total cost of operation for business aircraft.

Awker, R. W.↗