Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Biomechanics of the Treadmill Locomotion on the International Space Station

Exercise prescriptions completed by International Space Station (ISS) crewmembers are typically based upon evidence obtained during ground-based investigations, with the assumption that the results of long-term training in weightlessness will be similar to that attained in normal gravity. Coupled with this supposition are the assumptions that exercise motions and external loading are also similar between gravitational environments. Normal control of locomotion is dependent upon learning patterns of muscular activation and requires continual monitoring of internal and external sensory input [1]. Internal sensory input includes signals that may be dependent on or independent of gravity. Bernstein hypothesized that movement strategy planning and execution must include the consideration of segmental weights and inertia [2]. Studies of arm movements in microgravity showed that individuals tend to make errors but that compensation strategies result in adaptations, suggesting that control mechanisms must include peripheral information [3-5]. To date, however, there have been no studies examining a gross motor activity such as running in weightlessness other than using microgravity analogs [6-8]. The objective of this evaluation was to collect biomechanical data from crewmembers during treadmill exercise before and during flight. The goal was to determine locomotive biomechanics similarities and differences between normal and weightless environments. The data will be used to optimize future exercise prescriptions. This project addresses the Critical Path Roadmap risks 1 (Accelerated Bone Loss and Fracture Risk) and 11 (Reduced Muscle Mass, Strength, and Endurance). Data were collected from 7 crewmembers before flight and during their ISS missions. Before launch, crewmembers performed a single data collection session at the NASA Johnson Space Center. Three-dimensional motion capture data were collected for 30 s at speeds ranging from 1.5 to 9.5 mph in 0.5 mph increments with a 12-camera system. During flight, each crewmember completed up to 6 data collection sessions spread across their missions, performing their normal exercise prescription for the test day, resulting in varying data collection protocols between sessions. Motion data were collected by a single HD video camera positioned to view the crewmembers' left side, and tape markers were placed on their feet, legs, and neck on specific landmarks. Before data collection, the crewmembers calibrated the video camera. Video data were collected during the entire exercise session at 30 Hz. Kinematic data were used to determine left leg hip, knee, and ankle range of motion and contact time, flight time, and stride time for each stride. 129 trials in weightlessness were analyzed. Mean time-normalized strides were found for each trial, and cross-correlation procedures were used to examine the strength and direction of relationships between segment movement pattern timing in each gravitational condition. Cross-correlation analyses between gravitational conditions revealed highly consistent movement patterns at each joint. Peak correlation coefficients occurred at 0% phase, indicating there were no lags in movement timing. Joint ranges of motion were similar between gravitational conditions, with some slight differences between subjects. Motion patterns in weightlessness were highly consistent at a given speed with those occurring in 1G, indicating that despite differing sensory input, subjects maintain running kinematics. The data suggest that individuals are capable of compensating for loss of limb weight when creating movement strategies. These results have important implications for creating training programs for use in weightlessness as practitioners can have greater confidence in running motions transferring across gravitational environments. Furthermore, these results have implications for use by researchers investigating motor control mechanisms and investigating hypotheses related to movement strategies when using sensory input that is dependent upon gravity.

DeWitt, John↗

Post-deposition control of ferroelastic stripe domains and internal electric field by thermal treatment

The dependence of the formation of ferroelastic stripe domain patterns on the thermal history is investigated by detailed piezoresponse force microscopy and X-ray diffraction experiments after and during annealing of tensile strained tetragonal Pb(Ti,Zr)O{sub 3} epitaxial thin films on DyScO{sub 3} substrates. In particular, the ferroelastic pattern is reversibly interchanged between a cross-hatched and a stripe domain pattern if the films are cooled at different rates after annealing above the formation temperature of a-domains. Different types of 180° and non-180° patterns can be created, depending on the thermal treatment. The changes in the 180° domain structure and lattice parameters are attributed to a change of oxygen vacancy concentration, which results in a modification of the internal electric field and unit cell size, causing also a shift of T{sub C}. Thermal treatment is done on rhombohedral La:BiFeO{sub 3} thin films as well. It is observed that also in these films, appropriate heat treatment modifies the domain pattern and films with a stripe domain pattern can be created, confirming the general validity of the developed model.

36 MATERIALS SCIENCE↗

Temperature dependence of ordered GeSi island growth on patterned Si (001) substrates

Statistical information on GeSi islands grown on two-dimensionally pit-patterned Si substrates at different temperatures is presented. Three growth regimes on patterned substrates are identified: (i) kinetically limited growth at low growth temperatures, (ii) ordered island growth in an intermediate temperature range, and (iii) stochastic island growth within pits at high temperatures. A qualitative model based on growth kinetics is proposed to explain these phenomena. It can serve as a guidance to realize optimum growth conditions for ordered islands on patterned substrates.

36 MATERIALS SCIENCE↗

Isotopologue Consistency of Semi-Empirically Computed InfraRed Line Lists and Further Improvement for Rare Isotopologues: CO2 and SO2 Case Studies.

The semi-empirical molecular rovibrational IR line lists, such as ExoMol, TheoReTs, and Ames, combine the experimental accuracy and theoretical power to reach better than 0.1 cm-1 accuracy for line positions and better than 80-90% agreement for line intensities. The quality of these existing semi-empirical IR lists allows further improvements of intensity and line positions for those unobserved minor isotopologues. This paper presents our new BTRHE (Best Theory + Reliable High-resolution Experiment) strategy implementation. For line intensity, the isotopologue consistency and the patterns of mass dependence in the Ames-296K SO2 and CO2 IR lists are quantitatively presented along the mass-inverse coordinates. The consistency and patterns are better than those in existing experimental data. The methodology proposed here can be used to identify inconsistencies, outliers, and mistakes in intensities, and help improve Effective Dipole Model (EDM) and molecular IR databases. We call for an experimental study on the 50006 and 60007 bands of CO2 628. For line position predictions, a simple approach combining the variational IR line lists with Effective Hamiltonian (EH) model may refine the effective rotational constants A0/B0/C0 and quartic centrifugal distortion constants of minor isotopologues. The prediction accuracy may be improved by two orders of magnitude, i.e. reaching 0-5 MHz prediction accuracy in the range of J<20-30, Ka<10-20, and 0.01-0.02 MHz accuracy for A0/B0/C0. Several important factors have been systematically investigated and discussed, e.g. convergence, uncertainties, higher order terms, fixing EH parameters, mass coordinates, etc. Amicrowave (MW) line set consisting of 644,636 strong transitions for all 30 isotopologues and corresponding refined EH(Ames) parameters are reported in the supplementary material. This approach may be easily extended to rovibrational bands, hot bands, and other molecular systems.

Xinchuan Huang↗

Electronic and Mechanical Properties of Hydrogen Functionalized Carbon Nanotubes

We examined the electronic and mechanical properties of hydrogen functionalized carbon nanotubes. The functionalization pattern covers two extreme groups. One group has randomly selected functionalization sites including one to twenty percent of the carbon atoms. The other group has regularly patterned functional sites parallel to the tube axis. Metallic, small-gap semiconducting and large-gap semiconducting carbon nanotubes are studied. The results reveal that the electronic properties of the tubes are very sensitive to the degree of functionalization, with even one percent functionalization being enough to render metallic tubes semiconducting. On the other hand, the mechanical properties, like tensile modulus, are much less sensitive to functionalization. For carbon nanotubes functionalized with specific patterns, the electric properties depends strongly on the nature of the functionalization pattern.

Yang, Liu↗

Magnetic properties of square Py nanowires: Irradiation dose and geometry dependence

Arrays of ferromagnetic patterned nanostructures with single particle lateral dimensions between 160 nm and 400 nm were created by electron-beam lithography. The fourfold particles with rectangular-shaped walls around a square open area were produced from permalloy. Their magnetic properties were measured using the longitudinal magneto-optical Kerr effect. The article reports about the angle-dependent coercive fields and the influence of the e-beam radiation dose on sample shapes. It is shown that a broad range of radiation dose intensities enables reliable creation of nanostructures with parameters relevant for the desired magnetization reversal scenario. The experimental results are finally compared with micromagnetic simulations to explain the findings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructured block copolymer surfaces for control of microbe capture and aggregation

The capture and arrangement of surface-associated microbes is influenced by biochemical and physical properties of the substrate. In this report, we develop lectin-functionalized substrates containing patterned, three-dimensional polymeric structures of varied shapes and densities and use these to investigate the effects of topology and spatial confinement on lectin-mediated microbe capture. Films of poly(glycidyl methacrylate)-block-4,4-dimethyl-2-vinylazlactone (PGMA-b-PVDMA) were patterned on silicon surfaces into line or square grid patterns with 5 m wide features and varied edge spacing. The patterned films had three-dimensional geometries with 900 nm film thickness. After surface functionalization with wheat germ agglutinin, the size of Pseudomonas fluorescens aggregates captured was dependent on the pattern dimensions. Line patterns with edge spacing of 5 m or less led to the capture of individual microbes with minimal formation of aggregates, while grid patterns with the same spacing also captured individual microbes with further reduction in aggregation. Both geometries allowed for increases in aggregate size distribution with increased in edge spacing. These engineered surfaces combine spatial confinement with affinity-based microbe capture based on exopolysaccharide content to control the degree of microbe aggregation, and can also be used as a platform to investigate intercellular interactions and biofilm formation in microbial populations of controlled sizes.

affinity-based capture↗

Constraining Data Mining with Physical Models: Voltage- and Oxygen Pressure-Dependent Transport in Multiferroic Nanostructures

Development of new generation electronic devices requires understanding and controlling the electronic transport in ferroic, magnetic, and optical materials, which is hampered by two factors. First, the complications of working at the nanoscale, where interfaces, grain boundaries, defects, and so forth, dictate the macroscopic characteristics. Second, the convolution of the response signals stemming from the fact that several physical processes may be activated simultaneously. Here, we present a method of solving these challenges via a combination of atomic force microscopy and data mining analysis techniques. Rational selection of the latter allows application of physical constraints and enables direct interpretation of the statistically significant behaviors in the framework of the chosen physical model, thus distilling physical meaning out of raw data. We demonstrate our approach with an example of deconvolution of complex transport behavior in a bismuth ferrite–cobalt ferrite nanocomposite in ambient and ultrahigh vacuum environments. Measured signal is apportioned into four electronic transport patterns, showing different dependence on partial oxygen and water vapor pressure. These patterns are described in terms of Ohmic conductance and Schottky emission models in the light of surface electrochemistry. Finally and furthermore, deep data analysis allows extraction of local dopant concentrations and barrier heights empowering our understanding of the underlying dynamic mechanisms of resistive switching.

36 MATERIALS SCIENCE↗

Intraseasonal variability in a barotropic model with seasonal forcing

It has recently been suggested that oscillatory topographic instability could contribute to low-frequency variability over the Northern Hemisphere midlatitudes. A barotropic potential vorticity model, with a hierarchy of forcing and topography configurations on the sphere, is used to investigate the nature of low-frequency oscillations induced by such instabilities. Steady-state solutions of the model include multiple unstable equilibria that sustain oscillatory instabilities with periods of 10 - 15 days, and 150 - 180 days, for a realistic forcing pattern, Time-dependent solutions exhibit chaotic behavior with episodic oscillations, featuring both the intraseasonal (35 - 50 day) and biweekly (10 - 15 day) modes. The former is dominated by standing spatial patterns, the latter by traveling wave patterns. The phases of the intraseasonal oscillation are robust for all cases, exhibiting a clear oscillatory exchange of atmospheric angular momentum with the solid earth via mountain troque. It is demonstrated, through linear stability analysis on the sphere, that the intraseasonal oscillations are induced by topographic instabilities. The role of the seasonal cycle is studied by prescribing an annual cycle in the forcing. In this case, the winter forcing is more favorable than the summer for the occurrence of episodic intraseasonal oscillations. Recent observations are consistent with this model result.

Strong, Christopher M.↗

Scaling patterns of the suppression of {pi}{sup 0} yields in Au+Au collisions at {radical}(s{sub NN})=200 GeV: Links to the transport properties of the QGP

Suppression measurements for neutral pions ({pi}{sup 0}) are used to investigate the predicted path length L and transverse momentum p{sub T} dependent jet quenching patterns of the hot QCD medium produced in Au+Au collisions at {radical}(s{sub NN})=200 GeV. The observed scaling patterns show the predicted trends for jet-medium interactions dominated by radiative energy loss. They also allow simple estimates of the transport coefficient q and the ratio of viscosity to entropy density {eta}/s. These estimates indicate that the short mean free path {lambda} in the QCD medium leading to hydrodynamic-like flow with a small value of {eta}/s is also responsible for the strong suppression observed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spatial and Temporal Patterns of Tidal Dissipation in Synchronous Satellites

Tidal heating is an important energy source for several solar system bodies, and there is a wide-spread perception that the pattern of surface heat flow is diagnostic of internal structure. We wish to clarify that situation. Our analysis depends upon two important assumptions: First, that heat transport is dominated by conduction. Second, that the body can be modeled by a sequence of spherically symmetric layers, each with a linear visco-elastic rheology. Under these assumptions, surface heat flow patterns in tidally dominated satellites will reflect radially integrated dissipation patterns. For synchronously rotating satellites with zero obliquity, this pattern depends quite strongly on orbital eccentricity but relatively little on purely radial variations in internal structure. The total amount of heat generated within the body does depend sensitively on internal structure, but the spatial pattern is rather insensitive to structure, especially at low orbital eccentricities.

Bills, Bruce G.↗

SU-E-J-178: A Normalization Method Can Remove Discrepancy in Ventilation Function Due to Different Breathing Patterns

Purpose: To develop a normalization method to remove discrepancy in ventilation function due to different breathing patterns. Methods: Twenty five early stage non-small cell lung cancer patients were included in this study. For each patient, a ten phase 4D-CT and the voluntarily maximum inhale and exhale CTs were acquired clinically and retrospectively used for this study. For each patient, two ventilation maps were calculated from voxel-to-voxel CT density variations from two phases of the quiet breathing and two phases of the extreme breathing. For the quiet breathing, 0% (inhale) and 50% (exhale) phases from 4D-CT were used. An in-house tool was developed to calculate and display the ventilation maps. To enable normalization, the whole lung of each patient was evenly divided into three parts in the longitude direction at a coronal image with a maximum lung cross section. The ratio of cumulated ventilation from the top one-third region to the middle one-third region of the lung was calculated for each breathing pattern. Pearson's correlation coefficient was calculated on the ratios of the two breathing patterns for the group. Results: For each patient, the ventilation map from the quiet breathing was different from that of the extreme breathing. When the cumulative ventilation was normalized to the middle one-third of the lung region for each patient, the normalized ventilation functions from the two breathing patterns were consistent. For this group of patients, the correlation coefficient of the normalized ventilations for the two breathing patterns was 0.76 (p < 0.01), indicating a strong correlation in the ventilation function measured from the two breathing patterns. Conclusion: For each patient, the ventilation map is dependent of the breathing pattern. Using a regional normalization method, the discrepancy in ventilation function induced by the different breathing patterns thus different tidal volumes can be removed.

60 APPLIED LIFE SCIENCES↗

New evidence on the nature of the neutron star and accretion flow in Vela X-1 from pulse timing observations

It is believed that variations in the intrinsic pulse frequencies of neutron star X-ray sources reflect changes in the rotation rate of the stellar crust produced by torque originating outside and inside the star. The external torque depends on the flow pattern of the accreting plasma, while the internal torque depends on the state of the interior and its coupling to the crust. Information about the accretion flow and the star itself can, therefore, be obtained on the basis of a study of intrinsic frequency variations. The present investigation is concerned with the results of a detailed study of the 283 s pulsing X-ray star Vela X-1 using pulse timing techniques. It is found that the frequency variations in this source are consistent with the occurrence of a succession of temporally unresolved events which can be characterized mathematically as second-order red noise in the pulse phase.

Boynton, P. E.↗

Efficient Aho-Corasick String Matching on Emerging Multicore Architectures

String matching algorithms are critical to several scientific fields. Beside text processing and databases, emerging applications such as DNA protein sequence analysis, data mining, information security software, antivirus, ma- chine learning, all exploit string matching algorithms [3]. All these applica- tions usually process large quantity of textual data, require high performance and/or predictable execution times. Among all the string matching algorithms, one of the most studied, especially for text processing and security applica- tions, is the Aho-Corasick algorithm. 1 2 Book title goes here Aho-Corasick is an exact, multi-pattern string matching algorithm which performs the search in a time linearly proportional to the length of the input text independently from pattern set size. However, depending on the imple- mentation, when the number of patterns increase, the memory occupation may raise drastically. In turn, this can lead to significant variability in the performance, due to the memory access times and the caching effects. This is a significant concern for many mission critical applications and modern high performance architectures. For example, security applications such as Network Intrusion Detection Systems (NIDS), must be able to scan network traffic against very large dictionaries in real time. Modern Ethernet links reach up to 10 Gbps, and malicious threats are already well over 1 million, and expo- nentially growing [28]. When performing the search, a NIDS should not slow down the network, or let network packets pass unchecked. Nevertheless, on the current state-of-the-art cache based processors, there may be a large per- formance variability when dealing with big dictionaries and inputs that have different frequencies of matching patterns. In particular, when few patterns are matched and they are all in the cache, the procedure is fast. Instead, when they are not in the cache, often because many patterns are matched and the caches are continuously thrashed, they should be retrieved from the system memory and the procedure is slowed down by the increased latency. Efficient implementations of string matching algorithms have been the fo- cus of several works, targeting Field Programmable Gate Arrays [4, 25, 15, 5], highly multi-threaded solutions like the Cray XMT [34], multicore proces- sors [19] or heterogeneous processors like the Cell Broadband Engine [35, 22]. Recently, several researchers have also started to investigate the use Graphic Processing Units (GPUs) for string matching algorithms in security applica- tions [20, 10, 32, 33]. Most of these approaches mainly focus on reaching high peak performance, or try to optimize the memory occupation, rather than looking at performance stability. However, hardware solutions supports only small dictionary sizes due to lack of memory and are difficult to customize, while platforms such as the Cell/B.E. are very complex to program.

Tumeo, Antonino↗

Orbit Selection for Earth Observation Missions

The orbit selection process is simplified for most earth-oriented satellite missions by a restriction to circular orbits, which reduces the primary orbit characteristics to be determined to only two: altitude and inclination. A number of important mission performance characteristics depend on these choices, however, so a major part of the orbit selection task is concerned with developing the correlating relationships in clear and convenient forms to provide a basis for rational orbit selection procedures. The present approach to that task is organized around two major areas of mission performance, orbit plane precession and coverage pattern development, whose dependence on altitude and inclination is delineated graphically in design chart form. These charts provide a visual grasp of the relationships between the quantities cited above, as well as other important mission performance parameters including viewing time of day (solar), sensor swath width (and fields of view), swath sequencing, and pattern repeat condition and repeat periods.

King, J. C.↗

The Pointing Self-calibration Algorithm for Aperture Synthesis Radio Telescopes

This paper is concerned with algorithms for calibration of direction-dependent effects (DDE) in aperture synthesis radio telescopes (ASRT). After correction of direction-independent effects (DIE) using self-calibration, imaging performance can be limited by the imprecise knowledge of the forward gain of the elements in the array. In general, the forward gain pattern is directionally dependent and varies with time due to a number of reasons. Some factors, such as rotation of the primary beam with Parallactic Angle for Azimuth–Elevation mount antennas are known a priori. Some, such as antenna pointing errors and structural deformation/projection effects for aperture-array elements cannot be measured a priori. Thus, in addition to algorithms to correct for DD effects known a priori, algorithms to solve for DD gains are required for high dynamic range imaging. Here, we discuss a mathematical framework for antenna-based DDE calibration algorithms and show that this framework leads to computationally efficient optimal algorithms that scale well in a parallel computing environment. As an example of an antenna-based DD calibration algorithm, we demonstrate the Pointing SelfCal (PSC) algorithm to solve for the antenna pointing errors. Our analysis show that the sensitivity of modern ASRT is sufficient to solve for antenna pointing errors and other DD effects. We also discuss the use of the PSC algorithm in real-time calibration systems and extensions for antenna Shape SelfCal algorithm for real-time tracking and corrections for pointing offsets and changes in antenna shape.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Effect of Historical SST Patterns on Radiative Feedback

Here, we investigate the dependence of radiative feedback on the pattern of sea-surface temperature (SST) change in fourteen Atmospheric General Circulation Models (AGCMs) forced with observed variations in SST and sea-ice over the historical record from 1871 to near-present. We find that over 1871-1980, the Earth warmed with feedbacks largely consistent and strongly correlated with long term climate sensitivity feedbacks (diagnosed from corresponding atmosphere-ocean GCM abrupt 4xCO2 simulations). Post 1980 however, the Earth warmed with unusual trends in tropical Pacific SSTs (enhanced warming in the west, cooling in the east) and cooling in the Southern Ocean that drove climate feedback to be uncorrelated with – and indicating much lower climate sensitivity than – that expected for long-term CO 2 increase. We show that these conclusions are not strongly dependent on the AMIP II SST dataset used to force the AGCMs, though the magnitude of feedback post 1980 is generally smaller in nine AGCMs forced with alternative HadISST1 SST boundary conditions. We quantify a ‘pattern effect’ (defined as the difference between historical and longterm CO 2 feedback) equal to 0.48 ± 0.47 [5-95%] W m -2 K -1 for the time-period 1871-2010 when the AGCMs are forced with HadISST1 SSTs, or 0.70 ± 0.47 [5-95%] W m -2 K -1 when forced with AMIP II SSTs. Assessed changes in the Earth’s historical energy budget agree with the AGCM feedback estimates. Furthermore satellite observations of changes in top-of-atmosphere radiative fluxes since 1985 suggest that the pattern effect was particularly strong over recent decades but may be waning post 2014.

54 ENVIRONMENTAL SCIENCES↗

Geometric Perturbations and Asymmetric vortex shedding About Slender Pointed Bodies

The flow about slender, pointed bodies can be characterized by different states with angle of attack. At moderate-to-high angles of attack (alpha approximately equals 40deg), a steady, asymmetric vortex pattern develops along the body, leading to a net lateral force. At higher angles of attack (alpha approximately equals 60deg), the aft-end of the body develops an unsteady von Karman shedding. As the angle of attack approaches 90deg, the entire body length exhibits a time-dependent vortex shedding pattern. The current work uses three-dimensional, thin-layer Navier-Stokes simulations to investigate the physical mechanisms of asymmetric vortex shedding at alpha = 40deg and alpha = 60deg. The development of an asymmetric vortex pattern via a convective instability mechanism is investigated using tip bumps, surface roughness, and tip curvature. It's found that surface roughness simulations can incite an asymmetric vortex state at alpha = 60deg which is consistent with the application of a tip bumps, and the experimentally observed flowfield. The unsteady von Karman vortex shedding on the aft portion of the body is also well resolved. The use of surface roughness did not incite a flow asymmetry at alpha = 40deg, and it was necessary to simulate tip curvature at this angle of attack in order to generate an asymmetric vortex state.

Murman, Scott M.↗