Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parabolic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Franck-Condon electron emission from polar semiconductor photocathodes

An analytical formulation of (optical-)phonon-mediated and momentum-resonant Franck-Condon emission of photoexcited electrons from polar semiconductors is shown to be very consistent with (i) the observed emission properties of a cesiated Ga⁢As⁢(001) photocathode at 808 nm [J. Phys. D: Appl. Phys. 54, 205301 (2021)] and (ii) the measured spectral emission properties of a Ga⁢N(0001) photocathode from just below its bandgap energy to 5 eV. The theoretical analysis in the parabolic band approximation predicts the form of both the quantum efficiency and mean transverse energy of photoemission as a function of the photocathode’s electron affinity and the electron temperature in the vicinity of its emission face. The good agreement between theory and experimental data also suggests that sub-10-nm rms surface roughness effects are not significant for polar semiconductor photocathodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Probing intraband excitations in ZrTe 5 : A high-pressure infrared and transport study

Zirconium pentatetelluride, ZrTe 5 , shows remarkable sensitivity to hydrostatic pressure. In this work we address the high-pressure transport and optical properties of this compound, on samples grown by flux and chemical vapor transport. The high-pressure resistivity is measured up to 2 GPa, and the infrared transmission up to 9 GPa. The dc conductivity anisotropy is determined using a microstructured sample. Together, the transport and optical measurements allow us to discern band parameters with and without the hydrostatic pressure, in particular the Fermi level, and the effective mass in the less conducting, out-of-plane direction. The results are interpreted within a simple two-band model characterized by a Dirac-type, linear in-plane band dispersion, and a parabolic out-of-plane dispersion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Distinguishing the gapped and Weyl semimetal scenario in ZrTe 5 : insights from an effective two-band model

In this work, we study the static and dynamic transport properties of a low-energy two-band model proposed previously in Martino et al. [PRL 122, 217402 (2019)], with an anisotropic in-plane linear momentum dependence and a parabolic out-of-plane dispersion. The model is extended to include a negative band gap, which leads to the emergence of a Weyl semimetal (WSM) state, as opposed to the gapped semimetal (GSM) state when the band gap is positive. Furthermore, we calculate and compare the zero- and finite-frequency transport properties of the GSM and WSM cases. The DC properties that are calculated for the GSM and WSM cases are Drude spectral weight, mobility, and resistivity. We determine their dependence on the Fermi energy and crystal direction. The in- and out-of-plane optical conductivities are calculated in the limit of the vanishing interband relaxation rate for both semimetals. The main common features are an ω 1/2 in-plane and ω 3/2 out-of-plane frequency dependence of the optical conductivity. We seek particular features related to the charge transport that could unambiguously point to one ground state over the other, based on the comparison with the experiment. Differences between the WSM and GSM are in principle possible only at extremely low carrier concentrations and at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Many-body Green's function approaches to the doped Fröhlich solid: Exact solutions and anomalous mass enhancement

In polar semiconductors and insulators, the Fröhlich interaction between electrons and long-wavelength longitudinal optical phonons induces a many-body renormalization of the carrier effective masses and the appearance of characteristic phonon sidebands in the spectral function, commonly dubbed “polaron satellites.” The simplest model that captures these effects is the Fröhlich model, whereby electrons in a parabolic band interact with a dispersionless longitudinal optical phonon. The Fröhlich model has been employed in a number of seminal papers, from early perturbation-theory approaches to modern diagrammatic Monte Carlo calculations. One limitation of this model is that it focuses on undoped systems, thus ignoring carrier screening and Pauli blocking effects that are present in real experiments on doped samples. Here, to overcome this limitation, we extend the Fröhlich model to the case of doped systems, and we provide exact solutions for the electron spectral function, mass enhancement, and polaron satellites. We perform the analysis using two approaches, namely, Dyson’s equation with the Fan-Migdal self-energy, and the second-order cumulant expansion. We find that these two approaches provide qualitatively different results. In particular, Dyson’s approach yields better quasiparticle masses and worse satellites, while the cumulant approach provides better satellite structures, at the price of worse quasiparticle masses. Both approaches yield an anomalous enhancement of the electron effective mass at finite doping levels, which in turn leads to a breakdown of the quasiparticle picture in a significant portion of the phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spinor $GW$ Bethe-Salpeter calculations in BerkeleyGW: Implementation, symmetries, benchmarking, and performance

Computing the GW quasiparticle band structure and Bethe-Salpeter equation (BSE) absorption spectra for materials with spin-orbit coupling have commonly been done by treating GW corrections and spin-orbit coupling (SOC) as separate perturbations to density-functional theory. However, accurate treatment of materials with strong spin-orbit coupling (such as many topological materials of recent interest, and thermoelectrics) often requires a nonperturbative approach using spinor wave functions in the Kohn-Sham equation and GW/BSE. Such calculations have only recently become available, in particular for the BSE. Here, we have implemented this approach in the plane-wave pseudopotential GW/BSE code BerkeleyGW, which is highly parallelized and widely used in the electronic-structure community. We present reference results for quasiparticle band structures and optical absorption spectra of solids with different strengths of spin-orbit coupling, including Si, Ge, GaAs, GaSb, CdSe, Au, and Bi 2 Se 3 . The calculated quasiparticle band gaps of these systems are found to agree with experiment to within a few tens of meV. SOC splittings are found to be generally in better agreement with experiment, including quasiparticle corrections to band energies. The absorption spectrum of GaAs is not significantly impacted by the inclusion of spin-orbit coupling due to its relatively small value (0.2 eV) in the Λ direction, while the absorption spectrum of GaSb calculated with the spinor GW/BSE captures the large spin-orbit splitting of peaks in the spectrum. For the prototypical topological insulator Bi 2 Se 3 , we find a drastic change in the low-energy band structure compared to that of DFT, with the spinorial treatment of the GW approximation correctly capturing the parabolic nature of the valence and conduction bands after including off-diagonal self-energy matrix elements. We present the detailed methodology, approach to spatial symmetries for spinors, comparison against other codes, and performance compared to spinless GW/BSE calculations and perturbative approaches to SOC. This work aims to spur further development of spinor GW/BSE methodology in excited-state research software and enables a more accurate and detailed exploration of electronic and optical properties of materials containing elements with large atomic numbers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Investigating effects of relativistic kinematics, dimensionality, interactions, and short-range correlations on the ratio of quartic over quadratic nuclear symmetry energies

While ample evidence for the so-called empirical parabolic law of the Equation of State (EOS) of isospin asymmetric nuclear matter (ANM) has been obtained in many studies within both non-relativistic and relativistic nuclear many-body theories using various interactions, it has been unclear if there is any fundamental physics reason for the small quartic symmetry energy compared to the quadratic one even as the ANM approaches pure neutron matter. Within both relativistic and non-relativistic Free Fermi Gas (FFG) models in coordinate spaces of arbitrary dimension d with and without considering Short-Range Correlations (SRC) as well as non-linear Relativistic Mean Field (RMF) models, we study effects of relativistic kinematics, dimensionality, interactions and SRC on the ratio Ψ(ρ) of quartic over quadratic symmetry energies in ANM EOSs. We found that the ratio Ψ(ρ) in the FFG model depends strongly on the dimension d. While it is very small already in the normal 3D space, it could be even smaller in spaces with reduced dimensions for sub-systems of particles in heavy-ion reactions and/or whole neutron stars due to constraints, collectivities and/or symmetries. Here, we also found that the ratio Ψ(ρ) could theoretically become very large only at the ultra-relativistic limit far above the density reachable in neutron stars. On the other hand, nuclear interaction directly and/or indirectly through SRC-induced high-momentum nucleons affect significantly the density dependence of Ψ(ρ) compared to the relativistic FFG model prediction. The SRC affects significantly not only the kinetic energy of symmetric nuclear matter but also the ratio Ψ(ρ) while the relativistic corrections are found negligible. The results may help better understand the EOS of dense neutron-rich matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Nonresonant central exclusive production of charged-hadron pairs in proton-proton collisions at s = 13 TeV

The central exclusive production of charged-hadron pairs in p p collisions at a center-of-mass energy of 13 TeV is examined, based on data collected in a special high- β * run of the LHC. The nonresonant continuum processes are studied with the invariant mass of the centrally produced two-pion system in the resonance-free region, m π + π − < 0.7 or m π + π − > 1.8 GeV . Differential cross sections as functions of the azimuthal angle between the surviving protons, squared exchanged four-momenta, and m π + π − are measured in a wide region of scattered proton transverse momenta, between 0.2 and 0.8 GeV, and for pion rapidities | y | < 2 . A rich structure of interactions related to double-pomeron exchange is observed. A parabolic minimum in the distribution of the two-proton azimuthal angle is observed for the first time. It can be interpreted as an effect of additional pomeron exchanges between the protons from the interference between the bare and the rescattered amplitudes. After model tuning, various physical quantities are determined that are related to the pomeron cross section, proton-pomeron and meson-pomeron form factors, pomeron trajectory and intercept, and coefficients of diffractive eigenstates of the proton. © 2024 CERN, for the CMS and TOTEMs Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Enhancements in laser-generated hot-electron production via focusing cone targets at short pulse and high contrast

We report on the increase in the accelerated electron number and energy using compound parabolic concentrator (CPC) targets from a short-pulse (~150 fs), high-intensity (>10 18 W/cm 2 ), and high-contrast (~10 8 ) laser-solid interaction. We report on experimental measurements using CPC targets where the hot-electron temperature is enhanced up to ~ 9 times when compared to planar targets. The temperature measured from the CPC target is (T e ) = 4.4 ± 1.3 MeV. Using hydrodynamic and particle in cell simulations, we identify the primary source of this temperature enhancement is the intensity increase caused by the CPC geometry that focuses the laser, reducing the focal spot and therefore increasing the intensity of the laser-solid interaction, which is also consistent with analytic expectations for the geometrical focusing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Excitonic Condensate in Flat Valence and Conduction Bands of Opposite Chirality

Excitonic Bose-Einstein condensation (EBEC) has drawn increasing attention recently with the emergence of 2D materials. A general criterion for EBEC, as expected in an excitonic insulator (EI) state, is to have negative exciton formation energies in a semiconductor. Here, using exact diagonalization of a multiexciton Hamiltonian modeled in a diatomic kagome lattice, we demonstrate that the negative exciton formation energies are only a prerequisite but insufficient condition for realizing an EI. By a comparative study between the cases of both conduction and valence flat bands (FBs) versus that of a parabolic conduction band, we further show that the presence and increased FB contribution to exciton formation provide an attractive avenue to stabilize the excitonic condensate, as confirmed by calculations and analyses of multiexciton energies, wave functions, and reduced density matrices. In conclusion, our results warrant a similar many-exciton analysis for other known and/or new candidates of EIs and demonstrate the FBs of opposite parity as a unique platform for studying exciton physics, paving the way to material realization of spinor BEC and spin superfluidity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

First Results from a Broadband Search for Dark Photon Dark Matter in the 44 to 52 μ eV Range with a Coaxial Dish Antenna

We present first results from a dark photon dark matter search in the mass range from 44 to 52 μ eV (10.7–12.5 GHz) using a room-temperature dish antenna setup called GigaBREAD. Dark photon dark matter converts to ordinary photons on a cylindrical metallic emission surface with area 0.5 m 2 and is focused by a novel parabolic reflector onto a horn antenna. Signals are read out with a low-noise receiver system. A first data taking run with 24 days of data does not show evidence for dark photon dark matter in this mass range, excluding dark photon photon mixing parameters χ ≳ 10 − 12 in this range at 90% confidence level. This surpasses existing constraints by about 2 orders of magnitude and is the most stringent bound on dark photons in this range below 49 μ eV . Published by the American Physical Society 2024

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Quasilinear dispersion in electronic band structure and high Seebeck coefficient in CuFeS 2 -based thermoelectric materials

The earth-abundant natural mineral chalcopyrite CuFeS 2 is a potential n-type thermoelectric material because of its large Seebeck coefficient at high carrier concentrations. For a long time, the large Seebeck coefficient of CuFeS 2 has been attributed to a large electron effective mass, but the reasons for this and the unusual carrier concentration dependent behavior have rarely been discussed. Here, we systematically investigated the special transport behavior of CuFeS 2 and found the classical parabolic band model to be inadequate in explaining it. Our experimental and theoretical studies indicate that there are two flat electronic pockets at the and Z points of the Brillouin zone near the conduction band edge of CuFeS 2 that dominate the charge transport. These electronic pockets result from nonparabolic quasilinearly dispersing bands that give rise to a linear wave vector dependent energy (E ~ k) and a carrier density dependent effective mass (m* ~ m 0 n 1/3 ). Such a strong carrier concentration dependent carrier effective mass results in the high Seebeck coefficient of CuFeS 2 compound under a large carrier density. Here, the work demonstrates that quasilinearly dispersing bands can give strongly enhanced Seebeck coefficient, and could be useful in optimizing the properties of thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Physical properties and electronic structure of single-crystal KCo 2 As 2

We present a method for producing high quality KCo 2 As 2 crystals, stable in air and suitable for a variety of measurements. X-ray diffraction, magnetic susceptibility, electrical transport and heat capacity measurements confirm the high quality and an absence of long range magnetic order down to at least 2 K. Residual resistivity values approaching 0.25 µΩ cm are representative of the high quality and low impurity scattering, and a Sommerfeld coefficient γ = 7.3 mJ/mol K 2 signifies weaker correlations than the Fe-based counterparts. Together with Hall effect measurements, angle-resolved photoemission experiments reveal a Fermi surface consisting of electron pockets at the center and corner of the Brillouin zone, in line with theoretical predictions and in contrast to the mixed carrier types of other pnictides with the ThCr 2 Si 2 structure. A large, linear magnetoresistance of 200% at 14 T, together with an observed linear and hyperbolic, rather than parabolic, band dispersions are unusual characteristics of this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unconventional quantum oscillations and evidence of nonparabolic electronic states in quasi-two-dimensional electron system at complex oxide interfaces

The simultaneous occurrence of electric-field controlled superconductivity and spin-orbit interaction makes two-dimensional electron systems (2DES) constructed from perovskite transition metal oxides promising candidates for the next generation of spintronics and quantum computing. It is, however, essential to understand the electronic bands thoroughly and verify the predicted electronic states experimentally in these 2DES to advance technological applications. Here, we present insights into the electronic states of the 2DES at oxide interfaces through comprehensive investigations of Shubnikov–de Haas oscillations in three different systems: EuO/KTaO 3 , LaAlO 3 /SrTiO 3 , and amorphous-LaAlO 3 /KTaO 3 . To accurately resolve these oscillations, we conducted transport measurements in high magnetic fields up to 60 T and low temperatures down to 100 mK. For 2D confined electrons at these interfaces, we observed a progressive increase of oscillations frequency and cyclotron mass with the magnetic field. We interpret these universal and intriguing findings by considering the existence of nontrivial electronic bands, for which the 𝐸−𝑘 dispersion incorporates both linear and parabolic relations. In addition to providing experimental evidence for nonparabolic electronic states in KTaO 3 and SrTiO 3 2DES, the unconventional oscillations presented in this study establish a paradigm for quantum oscillations in 2DES based on perovskite transition metal oxides, where the oscillation frequencies in 1/𝐵 exhibit quadratic dependence on the magnetic field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Exotic edge states of C 3 high-fold fermions in honeycomb lattices

A generalization of the graphene honeycomb model to the case where each site in the honeycomb lattice contains a n -fold degenerate set of eigenstates of the C 3 symmetry has been recently proposed to describe several systems, including triangulene crystals and photonic lattices. These generalized honeycomb models are defined by ( n a , n b ) , the number of C 3 eigenstates in the a and b sites of the unit cell, resulting in n a + n b bands. Thus, the (1,1) case gives the coventional honeycomb model that describes the two low-energy bands in graphene. Generalizations, such as (2,1), (2,2), and (3,3) display several nontrivial features, such as coexisting graphenelike Dirac cones with flat bands, both at zero and finite energy, as well as robust degeneracy points where a flat band and a parabolic band meet at the Γ point. Here we explore the edge states of this class of crystals, using as reference triangulene crystals, and we find several types of edge states absent in the conventional (1,1) honeycomb case, associated to the nontrivial features of the two-dimensional bands of the high-fold case. First, we find dispersive edge states associated to the finite-energy flat bands, that occur both at the armchair and zigzag termination. Second, in the case of noncentrosymmetric triangulene crystals that lead to a S = 1 Dirac band, we have a bonding-antibonding pair of dispersive edge states, localized in the same edge so that their energy splitting is reduced as their localization increases, opposite to the conventional behavior of pairs of states localized in opposite edges. Third, for the (3,3) case, that hosts a gap separating a pair of flat conduction and valence bands, we find nondispersive edge states with E = 0 in all edge terminations. Published by the American Physical Society 2024

Madail, L. (ORCID:0000000208457748)↗
DOE OSTI2023

Direct LiF imaging diagnostics on refractive X-ray focusing at the EuXFEL High Energy Density instrument

The application of fluorescent crystal media in wide-range X-ray detectors provides an opportunity to directly image the spatial distribution of ultra intense X-ray beams including investigation of the focal spot of free-electron lasers. Here the capabilities of the micro- and nano-focusing X-ray refractive optics available at the High Energy Density instrument of the European XFEL are reported, as measured in situ by means of a LiF fluorescent detector placed into and around the beam caustic. The intensity distribution of the beam focused down to several hundred nanometers was imaged at 9 keV photon energy. A deviation from the parabolic surface in a stack of nanofocusing Be compound refractive lenses (CRLs) was found to affect the resulting intensity distribution within the beam. Comparison of experimental patterns in the far field with patterns calculated for different CRL lens imperfections allowed the overall inhomogeneity in the CRL stack to be estimated. The precise determination of the focal spot size and shape on a sub-micrometer level is essential for a number of high energy density studies requiring either a pin-size backlighting spot or extreme intensities for X-ray heating.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Mirror-centered representation of a focusing hyperbolic mirror for X-ray beamlines

Conic sections are commonly used in reflective X-ray optics. Hyperbolic mirrors can focus a converging light source and are frequently paired with elliptical or parabolic mirrors in Wolter type configurations. This paper derives the closed-form expression for a mirror-centered hyperbolic shape, with zero-slope at the origin. Combined with the slope and curvature, such an expression facilitates metrology, manufacturing and mirror-bending calculations. Previous works consider ellipses, parabolas, magnifying hyperbolas or employ lengthy approximations. Here, the exact shape function is given in terms of the mirror incidence angle and the source and image distances.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

High-Temperature RF Transmission Loss Characteristics of Platinum–Inconel 600 and Platinum–304 Steel Interconnects

Radio frequency (RF) transmission losses that occur at electronic interconnects is currently an important limitation of wireless sensors and other electronic device packages that must operate in high-temperature environments. Herein, in-situ RF transmission losses were measured for two types of interconnects: platinum (Pt) wire bonded to an Inconel 600 coaxial cable; and Pt-wire bonded to a block of 304 steel. Heating the Pt wire/Inconel interconnects at 800 °C for up to 200 hours were found to be very stable with no measurable transmission losses. In contrast, Pt wire/304 steel block interconnects examined over similar test periods at 800 °C exhibited gradual increases in transmission losses leveling off at 10, 38 and 85 mdB at 400 MHz, 700 MHz, and 1 GHz, respectively. Increasing the test temperature to 900 °C caused further elevated transmission losses of 30, 70 and 108 mdB at the same reported frequencies. By comparison, temperature cycling of the Pt wire/304 steel interconnects between room temperature and 900 °C was found to cause more significant degradation. In particular, four thermal cycles from room temperature to 900 °C resulted in losses of 75, 271, and 482 mdB at the same reported frequencies. Parabolic oxidation relative to the RF skin depth in the 304 steel block at the tested frequencies are discussed as possible reasons for the transmission losses during the isothermal soaks, whereas interconnect degradation due to differences in thermal expansion between Pt and 304 steel are primarily responsible for transmission losses caused by high temperature cycling.

304 steel↗
DOE OSTI2024

A Study on Particle Trajectory Error in Finite-Element Particle-in-Cell Algorithms

Particle-in-cell (PIC) algorithms are widely used for the simulation of kinetic plasmas. PIC algorithms account for the interaction between charged particles in a plasma and the electromagnetic field in ambient space, including self-field interactions. The objective of this article is to study the error in charged particle trajectories present in finite-element (FE)-based PIC algorithms on unstructured meshes. We study how the trajectory error behaves according to the FE mesh resolution and the matrix solver employed in the FE algorithm. The study is performed by considering a trajectory established by a parabolic electric potential and an axial magnetic force acting on the charged particle. Under a proper choice combination of electric and magnetic field parameters, the 2-D particle trajectories comprise closed orbits. Numerical errors cause small perturbations on the trajectories, with cumulative effects. As a result, the resulting orbital trajectories exhibit distortions including spurious apsidal precession. These distortions provide a clear imprint of the numerical error. Here, we also study the numerical error in a quantitative fashion by computing the distance norm between the trajectories obtained by the exact fields and numerical fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗