Rocket investigation of the auroral green line
Dissociative excitation and recombination reactions of atomic oxygen by auroral electrons, related to auroral green line
Donahue, T. M.↗
SEARCH · Engineering Papers
Results for “oxygen lines”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
First Observation of Jupiter by XMM-Newton
We present the first X-ray observation of Jupiter by XMM-Newton. Images taken with the EPIC cameras show prominent emission, essentially all confined to the 0.2-2.0 keV band, from the planet s auroral spots; their spectra can be modelled with a combination of unresolved emission lines of highly ionised oxygen (OW and O W) , and a pseudo-continuum which may also be due to the superposition of many weak lines. A 2.8 enhancement in the RGS spectrum at 21-22 A (-0.57 keV) is consistent with an O W identification. Our spectral analysis supports the hypothesis that Jupiter s auroral emissions originate from the capture and acceleration of solar wind ions in the planet s magnetosphere, followed by X-ray production by charge exchange. The X-ray flux of the North spot is modulated at Jupiter s rotation period. We do not detect evidence for the -45 min X-ray oscillations observed by C W r u more than two years earlier. Emission from the equatorial regions of the planet s disk is also observed. Its spectrum is consistent with that of scattered solar X-rays.
Branduardi-Raymont, G.↗
Laser Amplifier Development for the Remote Sensing of CO2 from Space
Accurate global measurements of tropospheric CO2 mixing ratios are needed to study CO2 emissions and CO2 exchange with the land and oceans. NASA Goddard Space Flight Center (GSFC) is developing a pulsed lidar approach for an integrated path differential absorption (IPDA) lidar to allow global measurements of atmospheric CO2 column densities from space. Our group has developed, and successfully flown, an airborne pulsed lidar instrument that uses two tunable pulsed laser transmitters allowing simultaneous measurement of a single CO2 absorption line in the 1570 nm band, absorption of an O2 line pair in the oxygen A-band (765 nm), range, and atmospheric backscatter profiles in the same path. Both lasers are pulsed at 10 kHz, and the two absorption line regions are sampled at typically a 300 Hz rate. A space-based version of this lidar must have a much larger lidar power-area product due to the approximately x40 longer range and faster along track velocity compared to airborne instrument. Initial link budget analysis indicated that for a 400 km orbit, a 1.5 m diameter telescope and a 10 second integration time, a approximately 2 mJ laser energy is required to attain the precision needed for each measurement. To meet this energy requirement, we have pursued parallel power scaling efforts to enable space-based lidar measurement of CO2 concentrations. These included a multiple aperture approach consists of multi-element large mode area fiber amplifiers and a single-aperture approach consists of a multi-pass Er:Yb:Phosphate glass based planar waveguide amplifier (PWA). In this paper we will present our laser amplifier design approaches and preliminary results.
Solid-State Laser Amplifier↗
High Energy, Narrow Linewidth 1572nm Eryb-Fiber Based MOPA for a Multi-Aperture CO2 Trace-Gas Laser Space Transmitter
Accurate global measurements of tropospheric CO2 mixing ratios are needed to study CO2 emissions and CO2 exchange with the land and oceans. NASA Goddard Space Flight Center (GSFC) is developing a pulsed lidar approach for an integrated path differential absorption (IPDA) lidar to allow global measurements of atmospheric CO2 column densities from space. Our group has developed, and successfully flown, an airborne pulsed lidar instrument that uses two tunable pulsed laser transmitters allowing simultaneous measurement of a single CO2 absorption line in the 1570 nm band, absorption of an O2 line pair in the oxygen A-band (765 nm), range, and atmospheric backscatter profiles in the same path. Both lasers are pulsed at 10 kHz, and the two absorption line regions are sampled at typically a 300 Hz rate. A space-based version of this lidar must have a much larger lidar power-area product due to the x40 longer range and faster along track velocity compared to airborne instrument. Initial link budget analysis indicated that for a 400 km orbit, a 1.5 m diameter telescope and a 10 second integration time, a 2 mJ laser energy is required to attain the precision needed for each measurement. To meet this energy requirement, we have pursued parallel power scaling efforts to enable space-based lidar measurement of CO2 concentrations. These included a multiple aperture approach consists of multi-element large mode area fiber amplifiers and a single-aperture approach consists of a multi-pass Er:Yb:Phosphate glass based planar waveguide amplifier (PWA). In this paper we will present our laser amplifier design approaches and preliminary results.
micropulse lidar↗
Auroral excitation of optical emissions of atomic and molecular oxygen
The O I 'green line' (1S-1D) at 5577 A and the O2 (0,0) atmosphere band at 7620 A were measured in a steady IBC II(plus) aurora simultaneously with N2 emissions and the auroral electron flux. An empirical model based on these rocket measurements shows that the principal excitation source of O2(b 1 Sigma g plus) is energy transfer from O(1D), with direct electron impact of O2 contributing less than 5 percent. While the altitude profile of the green line emission resembles that which would be produced by electron impact excitation of O2, a dissociative excitation cross section of 10 to the minus 16th power is required for this interpretation. None of the other known O(1S) excitation mechanisms are thought capable of producing the observed emission rate.
Feldman, P. D.↗
Flammability and sensitivity of materials in oxygen-enriched atmospheres; Proceedings of the Fourth International Symposium, Las Cruces, NM, Apr. 11-13, 1989. Volume 4
The present volume discusses the ignition of nonmetallic materials by the impact of high-pressure oxygen, the promoted combustion of nine structural metals in high-pressure gaseous oxygen, the oxygen sensitivity/compatibility ranking of several materials by different test methods, the ignition behavior of silicon greases in oxygen atmospheres, fire spread rates along cylindrical metal rods in high-pressure oxygen, and the design of an ignition-resistant, high pressure/temperature oxygen valve. Also discussed are the promoted ignition of oxygen regulators, the ignition of PTFE-lined flexible hoses by rapid pressurization with oxygen, evolving nonswelling elastomers for high-pressure oxygen environments, the evaluation of systems for oxygen service through the use of the quantitative fault-tree analysis, and oxygen-enriched fires during surgery of the head and neck.
Stoltzfus, Joel M.↗
X-ray line emission from the Cygnus Loop
The HEAO 1 satellite has observed the X-ray spectrum of the Cygnus Loop in the 0.1-2.0 keV band. The observed count-rate spectrum is deconvolved by the Kahn and Blissett technique to demonstrate conclusively the presence of oxygen- and iron-line emission between 0.6 and 0.9 keV. The spectrum has been fitted with single- and two-component Raymond-Smith plasma emission models. The best-fit dominant X-ray temperature is approximately 3,200,000 K, and the best-fit interstellar column density is approximately a few times 10 to the 20th/sq cm.
Kahn, S. M.↗
Pressure broadening of ozone lines near 184 and 206 GHz by nitrogen and oxygen
The N2 and O2 pressure broadenings of the two O3 transitions, which are used for satellite monitoring of upper atmospheric O3, have been measured between 200 and 300 K. The derived air-broadening coefficients are accurate within 3 percent over the entire temperature range.
Oh, J. J.↗
The Condensation Line of Air and the Heats of Vaporization of Oxygen and Nitrogen
The condensation pressure of air was determined over the range of temperature from 60 to 85 K. The experimental results were slightly higher than the calculated values based on the ideal solution law. Heat of vaporization of oxygen was determined at four temperatures ranging from about 68 to 91 K and of nitrogen similarly at four temperatures ranging from 62 to 78 K.
GASES, THERMODYNAMIC - PROPERTIES↗
Atomic Resonance Radiation Energetics Investigation as a Diagnostic Method for Non-Equilibrium Hypervelocity Flows
Absorption measurements with a tunable vacuum ultraviolet light source have been proposed as a concentration diagnostic for atomic oxygen, and the viability of this technique is assessed in light of recent measurements. The instrumentation, as well as initial calibration measurements, have been reported previously. We report here additional calibration measurements performed to study the resonance broadening line shape for atomic oxygen. The application of this diagnostic is evaluated by considering the range of suitable test conditions and requirements, and by identifying issues that remain to be addressed.
Meyer, Scott A.↗
Nonintrusive fast response oxygen monitoring system for high temperature flows
A new technique has been developed for nonintrusive in situ measurement of oxygen concentration, gas temperature, and flow velocity of the test media in hypersonic wind tunnels. It is based on absorption of near-infrared radiation from inexpensive GaAlAs laser diodes used in optoelectronics industry. It is designed for simultaneous measurements along multiple lines of sight accessed by fiber optics. Molecular oxygen concentration is measured from the magnitude of absorption signals; rotational gas temperature is measured from the intensity ratio of two oxygen absorption lines; and the flow velocity is measured from the Doppler shift of the absorption line positions. This report describes the results of an extensive series of tests of the prototype instrument in laboratory flames emphasizing assessment of the instruments capabilities for quantitative measurement of O2 concentration (mole fraction) and gas temperature.
Oh, Daniel B.↗
Auger electron intensity variations in oxygen-exposed large grain polycrystalline silver
Auger electron spectroscopic studies of the grains in oxygen-charged polycrystal-line silver show significant intensity variations as a function of crystallographic orientation. These intensity variations were observed by studies of the Auger images and line scans of the different grains (randomly selected) for each silver transition energy. The results can be attributed to the diffraction of the ejected Auger electrons and interpreted by corresponding changes in the electron mean-free path for inelastic scattering and by oxygen atom accumulation in the subsurface. The subsurface (second layer) octahedral sites increased in size because of surface relaxation and serve as a stable reservoir for the dissolved oxygen.
Lee, W. S.↗
The global characteristics of atmospheric emissions in the lower thermosphere and their aeronomic implications
The green line (555.7 nm) of atomic oxygen and the Herzberg bands of molecular oxygen (measured between 250 and 280 nm) as observed from the Ogo 4 airglow photometer from August 1967 through January 1968 are discussed in terms of their spatial and temporal distributions and their relation to the atomic oxygen content in the lower thermosphere. Daily maps of the distribution of emissions show considerable structure (cells, patches, and bands) with appreciable changes from day to day. When data are averaged over periods of several days in length, the resulting patterns have only occasional tendencies to follow geomagnetic parallels. The seasonal variation is characterized by maxima in both the Northern and Southern Hemispheres in October, the Northern Hemisphere having substantially higher emission rates. These maxima tend to move toward the poles, leaving very low values of emission at low latitudes in December and January. Noting the similarity of the atomic oxygen profiles in the lower thermosphere to the profile of a Chapman distribution, formulae are derived relating the vertical column emission rates of the green line and the Herzberg bands to the atomic oxygen peak density.
Reed, E. I.↗
Interstellar lines in the ultraviolet spectrum of zeta Oph
Interstellar lines arising in carbon, oxygen, silicon, and sulfur observed in the ultraviolet spectrum of zeta Oph by rocket spectrographic techniques were analyzed. Within a factor of 10, the abundances of c(+), neutral 0, and Si(+) outside the H II region surrounding zeta Oph, relative to the hydrogen abundance, are equal to solar values. The lines in neutral C and S(+) imply that the interstellar matter is distributed among several clouds as indicated by high resolution visible spectra. It is suggested that the excited C(+) ions are inside the Stromgren sphere where proton densities equal to or greater than 0.0022 cm can collisionally excite the ions at sufficient rates. Stellar absorption lines of C IV (1548.2, 1550.8A) and N V (1238.8, 1242.8A) were observed shifted to lower wavelengths, indicating stellar mass loss.
Smith, A. M.↗
Dayglow forbidden O I 6300 and 5577 A lines in the early morning ionosphere.
Data on a developing morning ionosphere have been obtained by rocket measurement of the atomic oxygen red- and green-line airglow emissions and of the composition of the neutral and ionized constituents of the upper atmosphere. The use of tilting-filter photometers for the optical measurements resulted in reliable and accurate height profiles of the airglow intensity from below 100 to 245 km. The roles of the excitation of both O(super 1 D) and O(super 1 S) atoms by the dissociative recombination of O2(+) and electron impact were studied by using the 6300- and 5577-A data in conjunction with the ion composition measurements. The component of photodissociative excitation of O(super 1 D) by solar radiation in the Schumann-Runge continuum of O2 absorption was assessed as being approximately twice that determined for a previous rocket experiment.
Schaeffer, R. C.↗
Rockets using Liquid Oxygen
It is my task to discuss rocket propulsion using liquid oxygen and my treatment must be highly condensed for the ideas and experiments pertaining to this classic type of rocket are so numerous that one could occupy a whole morning with a detailed presentation. First, with regard to oxygen itself as compared with competing oxygen carriers, it is known that the liquid state of oxygen, in spite of the low boiling point, is more advantageous than the gaseous form of oxygen in pressure tanks, therefore only liquid oxygen need be compared with the oxygen carriers. The advantages of liquid oxygen are absolute purity and unlimited availability at relatively small cost in energy. The disadvantages are those arising from the impossibility of absolute isolation from heat; consequently, allowance must always be made for a certain degree of vaporization and only vented vessels can be used for storage and transportation. This necessity alone eliminates many fields of application, for example, at the front lines. In addition, liquid oxygen has a lower specific weight than other oxygen carriers, therefore many accessories become relatively larger and heavier in the case of an oxygen rocket, for example, the supply tanks and the pumps. The advantages thus become effective only in those cases where definitely scheduled operation and a large ground organization are possible and when the flight requires a great concentration of energy relative to weight. With the aim of brevity, a diagram of an oxygen rocket will be presented and the problem of various component parts that receive particularly thorough investigation in this classic case but which are also often applicable to other rocket types will be referred to.
Busemann, Adolf↗
Engineering a laser remote sensor for atmospheric pressure and temperature
A system for the remote sensing of atmospheric pressure and temperature is described. Resonant lines in the 7600 Angstrom oxygen A band region are used and an organic dye laser beam is tuned to measure line absorption changes with temperature or pressure. A reference beam outside this band is also transmitted for calibration. Using lidar techniques, profiling of these parameters with altitude can be accomplished.
Kalshoven, J. E., Jr.↗
Balloon-based interferometric techniques
A balloon-borne triple-etalon Fabry-Perot Interferometer, observing the Doppler shifts of absorption lines caused by molecular oxygen and water vapor in the far red/near infrared spectrum of backscattered sunlight, has been used to evaluate a passive spaceborne remote sensing technique for measuring winds in the troposphere and stratosphere. There have been two successful high altitude balloon flights of the prototype UCL instrument from the National Scientific Balloon Facility at Palestine, TE (May 80, Oct. 83). The results from these flights have demonstrated that an interferometer with adequate resolution, stability and sensitivity can be built. The wind data are of comparable quality to those obtained from operational techniques (balloon and rocket sonde, cloud-top drift analysis, and from the gradient wind analysis of satellite radiance measurements). However, the interferometric data can provide a regular global grid, over a height range from 5 to 50 km in regions of clear air. Between the middle troposphere (5 km) and the upper stratosphere (40 to 50 km), an optimized instrument can make wind measurements over the daylit hemisphere with an accuracy of about 3 to 5 m/sec (2 sigma). It is possible to obtain full height profiles between altitudes of 5 and 50 km, with 4 km height resolution, and a spatial resolution of about 200 km, along the orbit track. Below an altitude of about 10 km, Fraunhofer lines of solar origin are possible targets of the Doppler wind analysis. Above an altitude of 50 km, the weakness of the backscattered solar spectrum (decreasing air density) is coupled with the low absorption crosssection of all atmospheric species in the spectral region up to 800 nm (where imaging photon detectors can be used), causing the along-the-track resolution (or error) to increase beyond values useful for operational purposes. Within the region of optimum performance (5 to 50 km), however, the technique is a valuable potential complement to existing wind measuring systems and can provide a low cost addition to powerful active (LIDAR) wind measuring systems now under development.
Rees, David↗