Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

10-th order of accuracy for numerical solution of 3-D elasticity equations for heterogeneous materials on unfitted Cartesian meshes

We have developed the Optimal Local Truncation Error Method (OLTEM) with 10-th order of accuracy on unfitted Cartesian meshes for a system of 3-D elasticity equations with smooth irregular interfaces. 5 x 5 x 5 = 125-point stencils (similar to those for quadratic finite elements) for elastic heterogeneous materials are used for OLTEM. There are no unknowns at the interface points between different materials; the structure of the global discrete equations is the same for homogeneous and heterogeneous materials. The calculation of unknown stencil coefficients is based on the minimization of the local truncation error of the stencil equations and yields the optimal 10-th order of accuracy for OLTEM on unfitted Cartesian meshes, i.e., the increase by 7 orders in accuracy compared to quadratic finite elements on conformal meshes. A new post-processing procedure provides the 9-th order of accuracy for stresses in the 3-D case. Similar to basic computations it uses OLTEM with the 125-point stencils, the interface conditions and the elasticity equations. It was shown that the use of the elasticity equations for post-processing improves the accuracy of 0.1% stresses by 6 orders compared to post-processing without the use of PDEs. At an accuracy of for stresses, OLTEM with the new post-processing procedure reduces the number of degrees of freedom by 360 - 8000 times compared to quadratic finite elements with similar stencils. OLTEM with the 125-point stencils yields even more accurate results than high-order finite elements with much wider stencils. OLTEM provides accurate numerical results for compressible and nearly incompressible materials.

elasticity equations↗
DOE OSTI2020

First-principles prediction of incipient order in arbitrary high-entropy alloys: exemplified in Ti 0.25 CrFeNiAl

High-temperature disordered multi-component alloys, including high-entropy alloys, experience either segregation or partially-ordered phases to reach low-temperature phases. For Ti 0.25 CrFeNiAl x (0 ≤ x ≤ 1), experiments suggest a partially-ordered B2 phase, whereas CALculation of PHAse Diagrams (CALPHAD) predicts a region of L21+B2 coexistence. We employ first-principles KKR-CPA to assess stability of phases with arbitrary order and a KKR-CPA linear-response theory to predict atomic short-range order (SRO) in the disorder phase that reveals the competing long-range ordered (LRO) phases in a given Bravais lattice. The favorable SRO provides a specific concentration-waves (site occupation probabilities and partially-ordered unit cells) and estimated energy gains that can then be assess directly by KKR-CPA formation enthalpies. Our results are in good agreement with experiments and CALPHAD in Al-poor regions (x ≤ 0.75) and with CALPHAD in Al-rich region (1≥ x >0.75). Our first-principles KKR-CPA and SRO-based concentration-wave analysis is shown to be a powerful and fast method to assess competing LRO phases in complex solid-solution alloys, and our results suggests more careful experiments in Al-rich region are needed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Second-order spectral line shift comparisons

The second-order spectral line width formulae from the projection operator and kinetic theory methods were recently compared. It was shown that a systematic expansion of the projection operator width expression including initial correlations formally agrees with the second-order kinetic theory result. It is now shown that the second-order dynamic shifts are also formally the same. The static shifts, however, differ due to an ad hoc treatment of electron-electron correlations in the projection operator method. The approximation is necessary in order to screen the radiator-electron interactions. The differences, however, are expected to be small. Finally, the results suggest using the rigorous and more compact second-order width and shift expressions from the kinetic theory method as the starting point for spectral line shape calculations. At line center, however, the projection operator second-order expression for the width and shift simplifies and reduces to the kinetic theory result.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

High-order partitioned spectral deferred correction solvers for multiphysics problems

We present an arbitrarily high-order, conditionally stable, partitioned spectral deferred correction (SDC) method for solving multiphysics problems using a sequence of pre-existing single-physics solvers. This method extends the work in [1], [2], which used implicit-explicit Runge-Kutta methods (IMEX) to build high-order, partitioned multiphysics solvers. We consider a generic multiphysics problem modeled as a system of coupled ordinary differential equations (ODEs), coupled through coupling terms that can depend on the state of each subsystem; therefore the method applies to both a semi-discretized system of partial differential equations (PDEs) or problems naturally modeled as coupled systems of ODEs. The sufficient conditions to build arbitrarily high-order partitioned SDC schemes are derived. Based on these conditions, various of partitioned SDC schemes are designed. The stability of the first-order partitioned SDC scheme is analyzed in detail on a coupled, linear model problem. We show that the scheme is conditionally stable, and under conditions on the coupling strength, the scheme can be unconditionally stable. We demonstrate the performance of the proposed partitioned solvers on several classes of multiphysics problems with moderate coupling strength. They include a stiff linear system of ODEs, advection-diffusion-reaction systems, and fluid-structure interaction problems with both incompressible and compressible flows, where we verify the design order of the SDC schemes and study various stability properties. We also directly compare the accuracy, stability, and cost of the proposed partitioned SDC solver with the partitioned IMEX method in [1], [2] on this suite of test problems. The results suggest that the high-order partitioned SDC solvers are more robust than the partitioned IMEX solvers for the numerical examples considered in this work, while the IMEX methods require fewer implicit solves.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Insights into Cation Ordering of Double Perovskite Oxides from Machine Learning and Causal Relations

This work investigates origins of cation ordering in double perovskites using first-principles theory computations combined with machine learning (ML) and causal relations. We have considered various oxidation states of A, A', B, and B' from the family of transition metal ions to construct a diverse compositional space. A conventional framework employing traditional ML classification algorithms such as Random Forest (RF) coupled with appropriate features including geometry-driven and key structural modes leads to accurate prediction (~98%) of A-site cation ordering. We have evaluated the accuracy of ML models by employing analyses of decision paths, assignments of probabilistic confidence bound, and finally a direct non-Gaussian acyclic structural equation model to investigate causality. Our study suggests that structural modes are crucial for classifying layered, columnar, and rock-salt ordering. The charge difference between A and A' is the most important feature for predicting clear layered ordering, which in turn depends on the B and B' charge separation. We have also designed mathematical relationships with these features to derive energy differences to form clear layered ordering. Here, the trilinear coupling between tilt, in-phase rotation, and A-site antiferroelectric displacement in the Landau free-energy expansion becomes the necessary condition behind formation of A-site cation ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Phase Stability and Ordering in Rock Salt-Based Thermoelectrics: NaSbX 2 , AgSbX 2 , and Their Alloys with PbX and SnX (X = S, Se, Te)

Using first-principles density functional calculations, we study the phase stability and cation ordering behavior in ABX 2 , PbX-ABX 2 , and SnTe-ABTe 2 (A = Na, Ag; B = Sb; X = S, Se, Te) thermoelectrics that crystallize in rock salt-based lattices. We construct, separately for each ABX 2 system, cluster expansions fitted to T = o K energies of cation-ordered arrangements in order to identify the respective ground-state structures. We calculate the mixing energetics of A/B and {Pb, Sn}/AB cation-disordered solid solutions in ABX 2 and {Pb, Sn}X-ABX 2 systems, respectively, using special quasirandom structures. We find that (i) L11, a rock salt-based superlattice with A 1 B 1 stacking of cations along [111], is often the most favored cation ordering type across ABX 2 systems due to the ability of this superlattice structure to accommodate large size mismatches between A and B; (ii) A/B cation ordering is only weakly preferred over disorder in all ABX 2 systems, by <34 meV/cation, consistent with experimental observations of disordered rock salt phases at high temperatures; (iii) Na-containing ABX 2 systems strongly favor the formation of the ternary compound over the corresponding ground-state mixture of A 2 X + B 2 X 3 binary compounds, while Ag-containing ABX 2 systems do not; (iv) the experimentally reported noncubic phases of NaSbS 2 and AgSbS 2 are in fact distorted cation-ordered rock salt structures; and (v) all {Pb, Sn}X-ABX 2 systems show miscibility gaps in their phase diagrams, and this is partly due to the unfavorable electrostatics of ternary cation mixing relative to Pb or Sn + AB cation phase separation; however, estimation of the miscibility gap temperature using mean-field configurational entropy indicates that all systems except PbTe-AgSbTe 2 will readily mix at relatively low temperatures. Furthermore, our study of the structural properties, alloying behavior, and solubility limits in these promising materials is a crucial step forward in improving their thermoelectric performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Influence of Ordered Mesoporous Oxides in Plasma-Assisted Ammonia Synthesis

Widespread implementation of dielectric barrier discharge (DBD)-assisted NH 3 synthesis, a nascent technology operating under sustainable, ambient conditions, is hindered by low energy yields due to, in part, poor fundamental understanding. Porous oxides used to support metal nanoparticle catalysts have shown significant energy yield contributions for DBD-assisted NH 3 synthesis even without metal. Using an AC-powered, coaxial, single-stage reactor at 16 kV with equimolar (N 2 /H 2 ) feed, we measured NH 3 synthesis rates in the presence of different nonordered oxides, ordered SiO 2 structures (SBA-15 and MCM-41), and ordered Al-incorporated analogues (γ-Al 2 O 3 -coated with varying Al-loadings and Al-substitution, respectively: Al 2 O 3 -SBA-15 and Al-MCM-41). We systematically quantified NH 3 energy yield dependence on pore structures and material identities (i.e., ordered pores and Al incorporation) known to facilitate higher DBD-assisted NH 3 synthesis rates. SBA-15 displayed a higher steady-state energy yield than MCM-41, indicating that framework type is a crucial factor, with both ordered porous systems outperforming fumed SiO 2 . 10 wt % Al maximized in situ NH 3 uptake among the various Al loadings, exhibiting a higher steady-state energy yield and similar power to SBA-15. However, Al-MCM-41 had a similar steady-state energy yield and lower power than MCM-41, likely due to the extended γ-Al 2 O 3 surface that has a dielectric constant higher than that of SiO 2 . Both Al-incorporated analogues benefit from surface acid sites that can adsorb NH 3 in situ, resulting in higher overall NH 3 energy yields than that of their parent ordered SiO 2 . Al 2 O 3 -SBA-15 shielded more NH 3 than Al-MCM-41, likely due to a higher acid site density than the acid site identity. Furthermore, Al incorporation via γ-Al 2 O 3 coating more successfully improves the NH 3 energy yield; together with the high-performing ordered framework, these analogues are potential metal catalyst supports with promising energy yields for DBD-assisted synthesis of NH 3 and other chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Mechanisms of Metal Additive-Induced Ordering During SNIPS Membrane Formation

Isoporous membranes can be fabricated by combining self-assembly with nonsolvent induced phase separation (SNIPS) using an amphiphilic block copolymer like polystyrene-b-poly(4-vinylpyridine) (SV). Poly(4-vinylpyridine) (V) is known to complex with metal salts, which are hypothesized to stabilize solution ordering and preserve structure during casting. We explored how the molar ratio of metal additive to the poly(4-vinylpyridine) block affected the final membrane morphology via scanning electron microscopy (SEM). Dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and in situ grazing-incidence SAXS were used to track changes in solution ordering and chain conformation as a function of the molar ratio of the additive to the V block. Additives induced aggregation, promoted the formation of more compact conformations in solution, and facilitated micelle ordering onto lattices at optimal ratios. Furthermore, these experimental results were supported by random phase approximation calculations, which helped explain how the thermodynamic order–disorder transition shifts with additive binding strength. Stronger additive–polymer interactions reduced the block copolymer volume fraction required for ordering in solution, allowing ordered domains to form at lower polymer concentrations.

Additives↗
DOE OSTI2022

As–Se Pentagonal Linkers to Induce Chirality and Polarity in Mixed-Valent Fe–Se Tetrahedral Chains Resulting in Hidden Magnetic Ordering

A novel mixed-valent hybrid chiral and polar compound, Fe 7 As 3 Se 12 (en) 6 (H 2 O), has been synthesized by a single-step solvothermal method. The crystal structure consists of 1D [Fe 5 Se 9 ] chains connected via [As 3 Se 2 ]–Se pentagonal linkers and charge-balancing interstitial [Fe(en) 3 ] 2+ complexes (en = ethylenediamine). Neutron powder diffraction verified that interstitial water molecules participate in the crystal packing. Magnetic polarizability of the produced compound was confirmed by X-ray magnetic circular dichroism (XMCD) spectroscopy. X-ray absorption spectroscopy (XAS) and 57 Fe Mössbauer spectroscopy showed the presence of mixed-valent Fe 2+ /Fe 3+ in the Fe–Se chains. Magnetic susceptibility measurements reveal strong antiferromagnetic nearest neighbor interactions within the chains with no apparent magnetic ordering down to 2 K. Hidden short-range magnetic ordering below 70 K was found by 57 Fe Mössbauer spectroscopy, showing that a fraction of the Fe 3+ /Fe 2+ in the chains are magnetically ordered. Nevertheless, complete magnetic ordering is not achieved even at 6 K. Analysis of XAS spectra demonstrates that the fraction of Fe 3+ in the chain increases with decreasing temperature. Computational analysis points out several competing ferrimagnetic ordered models within a single chain. Here, this competition, together with variation in the Fe oxidation state and additional weak intrachain interactions, is hypothesized to prevent long-range magnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A combinatory ferroelectric compound bridging simple ABO 3 and A-site-ordered quadruple perovskite

The simple ABO 3 and A-site-ordered AA' 3 B 4 O 12 perovskites represent two types of classical perovskite functional materials. There are well-known simple perovskites with ferroelectric properties, while there is still no report of ferroelectricity due to symmetry breaking transition in A-site-ordered quadruple perovskites. Here we report the high pressure synthesis of an A-site-ordered perovskite PbHg 3 Ti 4 O 12 , the only known quadruple perovskite that transforms from high-temperature centrosymmetric paraelectric phase to low-temperature non-centrosymmetric ferroelectric phase. The coordination chemistry of Hg 2+ is changed from square planar as in typical A-site-ordered quadruple perovskite to a rare stereo type with 8 ligands in PbHg 3 Ti 4 O 12 . Thus PbHg 3 Ti 4 O 12 appears to be a combinatory link from simple ABO 3 perovskites to A-site-ordered AA' 3 Ti 4 O 12 perovskites, sharing both displacive ferroelectricity with former and structure coordination with latter. This is the only example so far showing ferroelectricity due to symmetry breaking phase transition in AA' 3 B 4 O 12 -type A-site-ordered perovskites, and opens a direction to search for ferroelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interplay of hidden orbital order and superconductivity in CeCoIn5

Abstract Visualizing atomic-orbital degrees of freedom is a frontier challenge in scanned microscopy. Some types of orbital order are virtually imperceptible to normal scattering techniques because they do not reduce the overall crystal lattice symmetry. A good example is d xz / d yz (π,π) orbital order in tetragonal lattices. For enhanced detectability, here we consider the quasiparticle scattering interference (QPI) signature of such (π,π) orbital order in both normal and superconducting phases. The theory reveals that sublattice-specific QPI signatures generated by the orbital order should emerge strongly in the superconducting phase. Sublattice-resolved QPI visualization in superconducting CeCoIn 5 then reveals two orthogonal QPI patterns at lattice-substitutional impurity atoms. We analyze the energy dependence of these two orthogonal QPI patterns and find the intensity peaked near E = 0, as predicted when such (π,π) orbital order is intertwined with d -wave superconductivity. Sublattice-resolved superconductive QPI techniques thus represent a new approach for study of hidden orbital order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Hidden magnetism uncovered in a charge ordered bilayer kagome material ScV 6 Sn 6

Charge ordered kagome lattices have been demonstrated to be intriguing platforms for studying the intertwining of topology, correlation, and magnetism. The recently discovered charge ordered kagome material ScV 6 Sn 6 does not feature a magnetic groundstate or excitations, thus it is often regarded as a conventional paramagnet. Here, using advanced muon-spin rotation spectroscopy, we uncover an unexpected hidden magnetism of the charge order. We observe an enhancement of the internal field width sensed by the muon ensemble, which takes place within the charge ordered state. More importantly, the muon spin relaxation rate below the charge ordering temperature is substantially enhanced by applying an external magnetic field. Taken together with the hidden magnetism found in AV 3 Sb 5 (A = K, Rb, Cs) and FeGe kagome systems, our results suggest ubiqitous time-reversal symmetry-breaking in charge ordered kagome lattices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Atomic order of rare earth ions in a complex oxide: a path to magnetotaxial anisotropy

Abstract Complex oxides offer rich magnetic and electronic behavior intimately tied to the composition and arrangement of cations within the structure. Rare earth iron garnet films exhibit an anisotropy along the growth direction which has long been theorized to originate from the ordering of different cations on the same crystallographic site. Here, we directly demonstrate the three-dimensional ordering of rare earth ions in pulsed laser deposited (Eu x Tm 1-x ) 3 Fe 5 O 12 garnet thin films using both atomically-resolved elemental mapping to visualize cation ordering and X-ray diffraction to detect the resulting order superlattice reflection. We quantify the resulting ordering-induced ‘magnetotaxial’ anisotropy as a function of Eu:Tm ratio using transport measurements, showing an overwhelmingly dominant contribution from magnetotaxial anisotropy that reaches 30 kJ m −3 for garnets with x = 0.5. Control of cation ordering on inequivalent sites provides a strategy to control matter on the atomic level and to engineer the magnetic properties of complex oxides.

Science & Technology - Other Topics↗
DOE OSTI2024

Absence of bulk charge density wave order in the normal state of UTe 2

A spatially modulated superconducting state, known as pair density wave (PDW), is a tantalizing state of matter with unique properties. Recent scanning tunneling microscopy (STM) studies revealed that spin-triplet superconductor UTe 2 hosts an unprecedented spin-triplet, multi-component PDW whose three wavevectors are indistinguishable from a preceding charge-density wave (CDW) order that survives to temperatures well above the superconducting critical temperature, T c . Whether the PDW is the mother or a subordinate order remains unsettled. Here, based on a systematic search for bulk charge order above T c using resonant elastic X-ray scattering (REXS), we show that the structure factor of charge order previously identified by STM is absent in the bulk within the sensitivity of REXS. Our results invite two scenarios: either the density-wave orders condense simultaneously at T c in the bulk, in which case PDW order is likely the mother phase, or the charge modulations are restricted to the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Charge order in the kagome lattice Holstein model: a hybrid Monte Carlo study

The Holstein model is a paradigmatic description of the electron-phonon interaction, in which electrons couple to local dispersionless phonon modes, independent of momentum. The model has been shown to host a variety of ordered ground states such as charge density wave (CDW) order and superconductivity on several geometries, including the square, honeycomb, and Lieb lattices. In this work, we study CDW formation in the Holstein model on the kagome lattice, using a recently developed hybrid Monte Carlo simulation method. We present evidence for √3 × √3 CDW order at an average electron filling of < n > = 2/3 per site, with an ordering wavevector at the K-points of the Brillouin zone. We estimate a phase transition occurring at T c ≈ t/18, where t is the nearest-neighbor hopping parameter. Our simulations find no signature of CDW order at other electron fillings or ordering momenta for temperatures T ≥ t/20.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Three-dimensional atomic structure and local chemical order of medium- and high-entropy nanoalloys

Medium- and high-entropy alloys (M/HEAs) mix several principal elements with near-equiatomic composition and represent a model-shift strategy for designing previously unknown materials in metallurgy, catalysis and other fields. One of the core hypotheses of M/HEAs is lattice distortion, which has been investigated by different numerical and experimental techniques. However, determining the three-dimensional (3D) lattice distortion in M/HEAs remains a challenge. Moreover, the presumed random elemental mixing in M/HEAs has been questioned by X-ray and neutron studies, atomistic simulations, energy dispersive spectroscopy and electron diffraction, which suggest the existence of local chemical order in M/HEAs. However, direct experimental observation of the 3D local chemical order has been difficult because energy dispersive spectroscopy integrates the composition of atomic columns along the zone axes and diffuse electron reflections may originate from planar defects instead of local chemical order. Here, in this work, we determine the 3D atomic positions of M/HEA nanoparticles using atomic electron tomography and quantitatively characterize the local lattice distortion, strain tensor, twin boundaries, dislocation cores and chemical short-range order (CSRO). We find that the high-entropy alloys have larger local lattice distortion and more heterogeneous strain than the medium-entropy alloys and that strain is correlated to CSRO. We also observe CSRO-mediated twinning in the medium-entropy alloys, that is, twinning occurs in energetically unfavoured CSRO regions but not in energetically favoured CSRO ones, which represents, to our knowledge, the first experimental observation of correlating local chemical order with structural defects in any material. We expect that this work will not only expand our fundamental understanding of this important class of materials but also provide the foundation for tailoring M/HEA properties through engineering lattice distortion and local chemical order.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ultrafast signatures of spin and orbital order in antiferromagnetic α-Sr2CrO4

Abstract The antiferromagnetic Mott insulator α -Sr 2 CrO 4 possesses multiple spin and orbital ordered phases, but their unique interplay is still relatively unexplored. Here, we used femtosecond optical spectroscopy to study ultrafast spin and orbital ordering dynamics in α -Sr 2 CrO 4 through their non-equilibrium response to photoexcitation. By varying the pump photon energy, we selectively drove inter-site spin hopping between neighboring Cr t 2 g orbitals and charge transfer-type transitions between oxygen 2 p and Cr e g orbitals. The resulting transient reflectivity dynamics revealed temperature-dependent anomalies across the Néel temperature for spin ordering as well as the transition temperatures linked to different types of orbital order. Our results reveal distinct relaxation timescales for spin and orbital orders in α -Sr 2 CrO 4 and provide experimental evidence for the phase transition at T O , possibly related to antiferro-type orbital ordering.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A simulation framework for evaluating electronic order workflows in integrated health records

Electronic health record (EHR) systems are critical to modern healthcare delivery, yet the dynamic workflows that govern electronic order processing remain underexplored. Inefficiencies in these digital pathways can cause delays in care, repetitive workloads, and even patient harm. This study presents a discrete-event simulation framework used to reconstruct and evaluate EHR-based order workflows in a large integrated healthcare system. Using real-world data extracted from the Veterans Health Administration’s Corporate Data Warehouse, the authors mapped order events to standardized state transitions and modeled their progression across different facilities of varying complexity levels. After being calibrated with empirical distributions of transition times and validated against observed time-in-system metrics, the simulation demonstrates close alignment with historical performance. Scenario analyses reveal that resource capacity constraints significantly amplify the impact of electronic order surges, which are reflected in the disproportionate growth in backlogs and processing delays. Adjustments in transition probabilities further increased recirculation and extended workflow paths. Network-based analysis identified Reserved, InProgress, and Completed as structurally critical states that function as hubs within the process network but the transitions in-between also act as major bottlenecks. These results showcased the effectiveness of simulation-based approaches in monitoring EHR order processing performance and evaluating consequences of workflow changes on healthcare network resources planning. The proposed simulation framework provides a scalable data-driven tool to support operational decision-making and improve the efficiency of electronic order management in complex healthcare environments.

Engineering↗