Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical phonons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Equation of State of TiN at High Pressures and Temperatures: A Possible Host for Nitrogen in Planetary Mantles

Nitrogen, the most abundant element in Earth's atmosphere, is also a primary component of solid nitride minerals found in meteorites and on Earth's surface. If they remain stable to high pressures and temperatures, these nitrides may also be important reservoirs of nitrogen in planetary interiors. We used synchrotron X-ray diffraction to measure the thermal equation of state and phase stability of titanium nitride (TiN) in a laser-heated diamond anvil cell at pressures up to ~70 GPa and temperatures up to ~2500 K. TiN maintains the cubic B1 (NaCl-type) crystal structure over the entire pressure and temperature range explored. It has K 0 = 274(4) GPa, K 0 ' = 3.9(2), and γ 0 = 1.39(4) for a fixed V 0 = 76.516(30) Å 3 (based on experimental measurements), q = 1, and θ 0 = 579 K. Additionally, we collected Raman spectra of TiN up to ~60 GPa, where we find that the transverse acoustic (TA), longitudinal acoustic (LA), and transverse optical (TO) phonon modes exhibit mode Grüneisen parameters of 1.66(17), 0.54(15), and 0.93(4), respectively. Based on our equation of state, TiN has a density of ~5.6–6.4 g/cm 3 at Earth's lower mantle conditions, significantly more dense than both the mantle of the Earth and the estimated densities of the mantles of other terrestrial planets, but less dense than planetary cores. Furthermore, we find that TiN remains stable against physical decomposition at the pressures and temperatures found within Earth's mantle, making it a plausible reservoir for deep planetary nitrogen if chemical conditions allow its formation.

58 GEOSCIENCES↗
DOE OSTI2020

Efficient Langevin dynamics for “noisy” forces

Efficient Boltzmann-sampling using first-principles methods is challenging for extended systems due to the steep scaling of electronic structure methods with the system size. Additionally, stochastic approaches provide a gentler system-size dependency at the cost of introducing “noisy” forces, which could limit the efficiency of the sampling. When the forces are deterministic, the first-order Langevin dynamics (FOLD) offers efficient sampling by combining a well-chosen preconditioning matrix S with a time-step-bias-mitigating propagator [G. Mazzola and S. Sorella, Phys. Rev. Lett. 118, 015703 (2017)]. However, when forces are noisy, S is set equal to the force-covariance matrix, a procedure that severely limits the efficiency and the stability of the sampling. Here, we develop a new, general, optimal, and stable sampling approach for FOLD under noisy forces. We apply it for silicon nanocrystals treated with stochastic density functional theory and show efficiency improvements by an order-of-magnitude.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Color center in β -Ga 2 O 3 emitting at the telecom range

Transition metal (TM) ions incorporated into a host from a wide bandgap semiconductor are recognized as a promising system for quantum technologies with enormous potential. In this work, we report on a TM color center in β-Ga 2 O 3 with physical properties attractive for quantum information applications. The center is found to emit at 1.316 μm and exhibits weak coupling to phonons, with optically addressable higher-lying excited states, beneficial for single-photon emission within the telecom range (O-band). Using magneto-photoluminescence (PL) complemented by time-resolved PL measurements, we identify the monitored emission to be internal 1 E→ 3 A 2 spin-forbidden transitions of a 3d 8 TM ion with a spin-triplet ground state—a possible candidate for a spin qubit. We tentatively attribute this color center to a complex involving a sixfold coordinated Cu 3+ ion.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Intrinsic emittance properties of an Fe-doped β-Ga 2 O 3 (010) photocathode: Ultracold electron emission at 300 K and the polaron self-energy

Measurements of the spectral emission properties of an iron-doped a β-Ga 2 O 3 (010) photocathode at 300 K reveal the presence of an ultracold contribution to the total electron beam emission with a 6 meV mean transverse energy (MTE) in the 3.5–4.4 eV photon energy range (282–354 nm). This extreme sub-thermal photoemission signal is consistent with direct emission of electrons photoexcited from the Fe dopant states into the low effective mass and positive electron affinity primary conduction band, and it is superimposed on a stronger signal with a larger MTE associated with an (optical)phonon-mediated momentum-resonant Franck–Condon (FC) emission process from a thermally populated and negative electron affinity upper conduction band. For photon energies above 4.5 eV, a transition from a long to a short transport regime is forced by an absorption depth reduction to below 100 nm and both MTE signals exhibit spectral trends consistent with phonon-mediated FC emission if the polaron formation self-energy is included in the temperature of the initial thermalized photoexcited electron distribution.

Angeloni, Louis A. [University of Illinois, Chicag↗
DOE OSTI2020

Atomic fluctuations in electronic materials revealed by dephasing

The microscopic origin and timescale of the fluctuations of the energies of electronic states has a significant impact on the properties of interest of electronic materials, with implication in fields ranging from photovoltaic devices to quantum information processing. Spectroscopic investigations of coherent dynamics provide a direct measurement of electronic fluctuations. Modern multidimensional spectroscopy techniques allow the mapping of coherent processes along multiple time or frequency axes and thus allow unprecedented discrimination between different sources of electronic dephasing. Exploiting modern abilities in coherence mapping in both amplitude and phase, we unravel dissipative processes of electronic coherences in the model system of CdSe quantum dots (QDs). The method allows the assignment of the nature of the observed coherence as vibrational or electronic. The expected coherence maps are obtained for the coherent longitudinal optical (LO) phonon, which serves as an internal standard and confirms the sensitivity of the technique. Fast dephasing is observed between the first two exciton states, despite their shared electron state and common environment. This result is contrary to predictions of the standard effective mass model for these materials, in which the exciton levels are strongly correlated through a common size dependence. In contrast, the experiment is in agreement with ab initio molecular dynamics of a single QD. Electronic dephasing in these materials is thus dominated by the realistic electronic structure arising from fluctuations at the atomic level rather than static size distribution. The analysis of electronic dephasing thereby uniquely enables the study of electronic fluctuations in complex materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Emission properties of a hybrid metallized diamond(001) photocathode

The spectral emission characteristics of a proof-of-concept hybrid metallized diamond(001) photocathode are presented. The quantum efficiency (QE) is shown to be determined by the photoinjection efficiency across the ohmic contact at the back metallized face, whereas the mean transverse energy (MTE) of the photoemitted electrons is consistent with an (optical)phonon-assisted and momentum-resonant Franck-Condon mechanism [Franck-Condon electron emission from polar semiconductor photocathodes, Phys. Rev. Appl. 23, 054065 (2025)] following electron drift transport to the untreated diamond(001) front emission face. Emission is observed from both the lower and upper conduction bands of diamond with positive and negative electron affinity, respectively. A potential route to the realization of a red-visible photocathode based on this concept with a sub-50 meV MTE and a QE greater than 0.1% is discussed.

Density of states↗
DOE OSTI2021

Scaling functions for eigenstate entanglement crossovers in harmonic lattices

For quantum matter, eigenstate entanglement entropies obey an area law or log-area law at low energies and small subsystem sizes and cross over to volume laws for high energies and large subsystems. This transition is captured by crossover functions, which assume a universal scaling form in quantum critical regimes. We demonstrate this for the harmonic lattice model, which describes quantized lattice vibrations and is a regularization for free scalar field theories, modeling, e.g., spin-0 bosonic particles. In one dimension, the ground-state entanglement obeys a log-area law. For dimensions d ≥ 2, it displays area laws, even at criticality. The distribution of excited-state entanglement entropies is found to be sharply peaked around subsystem entropies of corresponding thermodynamic ensembles in accordance with the eigenstate thermalization hypothesis. Numerically, we determine crossover scaling functions for the quantum critical regime of the model and do a large-deviation analysis. We show how infrared singularities of the system can be handled and how to access the thermodynamic limit using a perturbative trick for the covariance matrix. Eigenstates for quasi-free bosonic systems are not Gaussian. Here, we resolve this problem by considering appropriate squeezed states instead. For these, entanglement entropies can be evaluated efficiently.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Optical properties and carrier localization in the layered phosphide EuCd 2 P 2

The temperature dependence of the complex optical properties of the layered phosphide material EuCd 2 P 2 have been measured over a wide frequency range above and below T N ≃ 11.5 K for light polarized in the a-b planes. At room temperature, the optical conductivity is well described by a weak free-carrier component with a Drude plasma frequency of ≃ 1100 cm –1 and a scattering rate of 1/τ D ≃ 700 cm –1 , with the onset of interband absorptions above ≃ 2000 cm –1 . Two infrared-active E u modes are observed at ≃ 89 and 239 cm –1 . As the temperature is reduced the scattering rate decreases and the low-frequency conductivity increases slightly; however, below ≃ 50 K the conductivity decreases until at the resistivity maximum at ≃ 18 K (just below 2T N ) the spectral weight associated with free carriers is transferred to a localized excitation at ≃ 500 cm –1 . Below T N , metallic behavior is recovered. Interestingly, the E u modes are largely unaffected by these changes, with only the position of the high-frequency mode showing any signs of anomalous behavior. Finally, while several scenarios are considered, the prevailing view is that the resistivity maximum and subsequent carrier localization is due to the formation of ferromagnetic domains below ≃ 2 T N that result in spin-polarized clusters due to spin-carrier coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photonic Refrigeration from Time-Modulated Thermal Emission

We develop theoretical and computational formalisms to describe thermal radiation from temporally modulated systems. We demonstrate that such a modulation results in a photon-based active cooling mechanism. This mechanism has a high thermodynamic performance that can approach the Carnot limit. Our work points to exciting new avenues in active, time-modulated control of thermal emission for cooling and energy harvesting applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Optically anisotropic porous silicon microlenses with tunable refractive indexes and birefringence profiles

The effect of spatially varying birefringence on the focusing behavior of porous silicon (PSi) and porous silicon dioxide (PSiO 2 ) gradient refractive index (GRIN) lenses is investigated. Both materials attain broad, tunable refractive indexes and birefringence profiles, with PSi having a maximum birefringence of ~0.26 and PSiO 2 a reduced maximum birefringence of ~0.03 at 633 nm. These GRIN lenses exhibit polarization-dependent split focusing behavior, wherein the divergence angle between the twin foci increases with the birefringence gradient. PSi’s large birefringence allows the divergence angle to be tuned such that light focuses away from the center of the lens. These GRIN elements demonstrate how tunable birefringent materials can be used to engineer polarization-selective optical responses.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strong laser polarization control of coherent phonon excitation in van der Waals material Fe 3 GeTe 2

Optical manipulation of coherent phonon frequency in two-dimensional (2D) materials could advance the development of ultrafast phononics in atomic-thin platforms. However, conventional approaches for such control are limited to doping, strain, structural or thermal engineering. Here, we report the experimental observation of strong laser-polarization control of coherent phonon frequency through time-resolved pump-probe spectroscopic study of van der Waals (vdW) materials Fe 3 GeTe 2 . When the polarization of the pumping laser with tilted incidence is swept between in-plane and out-of-plane orientations, the frequencies of excited phonons can be monotonically tuned by as large as 3% (~100 GHz). Our first-principles calculations suggest the strong planar and vertical inter-atomic interaction asymmetry in layered materials accounts for the observed polarization-dependent phonon frequencies, as in-plane/out-of-plane polarization modifies the restoring force of the lattice vibration differently. Our work provides insightful understanding of the coherent phonon dynamics in layered vdW materials and opens up new avenues to optically manipulating coherent phonons.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Collective modes in excitonic insulators: Effects of electron-phonon coupling and signatures in the optical response

Here, we consider a two-band spinless model describing an excitonic insulator (EI) on the two-dimensional square lattice with anisotropic hopping parameters and electron-phonon (el-ph) coupling, inspired by the EI candidate Ta 2 NiSe 5 . We systematically study the nature of the collective excitations in the ordered phase which originates from the interband Coulomb interaction and the el-ph coupling. When the ordered phase is stabilized only by the Coulomb interaction (pure EI phase), its collective response exhibits a massless phase mode in addition to the amplitude mode. We show that in the BEC regime, the signal of the amplitude mode becomes less prominent and that the anisotropy in the phase-mode velocities is reduced. Through coupling to the lattice, the phase mode acquires a mass and the signal of the amplitude mode becomes less prominent. Importantly, the character of the softening mode at the boundary between the normal semiconductor phase and the ordered phase depends on the parameters. In particular, we point out that even for el-ph coupling smaller than the Coulomb interaction, the mode that softens to zero at the boundary can have a phonon character. We also discuss how the collective modes can be observed in the optical conductivity. Furthermore, we study the effects of nonlocal interactions on the collective modes and show the possibility of realizing a coexistence of an in-gap mode and an above-gap mode split off from the single-amplitude mode in the system with local interactions only.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Quenched lattice fluctuations in optically driven SrTiO3

Abstract Crystal lattice fluctuations, which are known to influence phase transitions of quantum materials in equilibrium, are also expected to determine the dynamics of light-induced phase changes. However, they have only rarely been explored in these dynamical settings. Here we study the time evolution of lattice fluctuations in the quantum paraelectric SrTiO 3 , in which mid-infrared drives have been shown to induce a metastable ferroelectric state. Crucial in these physics is the competition between polar instabilities and antiferrodistortive rotations, which in equilibrium frustrate the formation of long-range ferroelectricity. We make use of high-intensity mid-infrared optical pulses to resonantly drive the Ti–O-stretching mode at 17 THz, and we measure the resulting change in lattice fluctuations using time-resolved X-ray diffuse scattering at a free-electron laser. After a prompt increase, we observe a long-lived quench in R-point antiferrodistortive lattice fluctuations. Their enhancement and reduction are theoretically explained by considering the fourth-order nonlinear phononic interactions to the driven optical phonon and third-order coupling to lattice strain, respectively. These observations provide a number of testable hypotheses for the physics of light-induced ferroelectricity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Functional lipid pairs as building blocks of phase-separated membranes

Biological membranes exhibit a great deal of compositional and phase heterogeneity due to hundreds of chemically distinct components. As a result, phase separation processes in cell membranes are extremely difficult to study, especially at the molecular level. It is currently believed that the lateral membrane heterogeneity and the formation of domains, or rafts, are driven by lipid–lipid and lipid–protein interactions. Nevertheless, the underlying mechanisms regulating membrane heterogeneity remain poorly understood. In the present work, we combine inelastic X-ray scattering with molecular dynamics simulations to provide direct evidence for the existence of strongly coupled transient lipid pairs. These lipid pairs manifest themselves experimentally through optical vibrational (a.k.a. phononic) modes observed in binary (1,2-dipalmitoyl- sn -glycero-3-phosphocholine [DPPC]–cholesterol) and ternary (DPPC–1,2-dioleoyl- sn -glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-glycero-3-phosphocholine [DOPC/POPC]–cholesterol) systems. The existence of a phononic gap in these vibrational modes is a direct result of the finite size of patches formed by these lipid pairs. The observation of lipid pairs provides a spatial (subnanometer) and temporal (subnanosecond) window into the lipid–lipid interactions in complex mixtures of saturated/unsaturated lipids and cholesterol. Our findings represent a step toward understanding the lateral organization and dynamics of membrane domains using a well-validated probe with a high spatial and temporal resolution.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Thermoelectric Performance of the 2D Bi 2 Si 2 Te 6 Semiconductor

Bi 2 Si 2 Te 6 , a 2D compound, is a direct band gap semiconductor with an optical band gap of 0.25 eV, and is a promising thermoelectric material. Single-phase Bi 2 Si 2 Te 6 is prepared by a scalable ball-milling and annealing process and the highly densified polycrystalline samples are prepared by spark plasma sintering. Bi 2 Si 2 Te 6 shows a p-type semiconductor transport behavior and exhibits an intrinsically low lattice thermal conductivity of ~0.48 Wm -1 K -1 (cross-plane) at 573 K. The first-principles density functional theory calculations indicate that such low lattice thermal conductivity is derived from the interactions between acoustic phonons and low-lying optical phonons, local vibrations of Bi, the low Debye temperature and strong anharmonicity result from the unique 2D crystal structure and metavalent bonding of Bi 2 Si 2 Te 6 . The Bi 2 Si 2 Te 6 exhibits an optimal figure of merit ZT of ~0.51 at 623 K, which can be further enhanced by the substitution of Bi with Pb. Pb doping leads to a large increase in power factor S 2 σ, from ~4.0 μWcm -1 K- 2 of Bi 2 Si 2 Te 6 to ~8.0 μWcm -1 K -2 of Bi 1.98 Pb 0.02 Si 2 Te 6 at 775 K, owing to the increase in carrier concentration. Moreover, Pb doping induces a further reduction in the lattice thermal conductivity to ~0.38 Wm -1 K -1 (cross-plane) at 623 K in Bi 1.98 Pb 0.02 Si 2 Te 6 ,. The simultaneous optimization of the power factor and lattice thermal conductivity achieves a peak ZT of ~0.90 at 723 K and a high average ZT of ~0.66 at 400–773 K in Bi 1.98 Pb 0.02 Si 2 Te 6 .

36 MATERIALS SCIENCE↗