Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multilayers.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Stress and free vibration analyses of multilayered composite plates

This paper presents a two-phase computational procedure for the accurate prediction of vibration frequencies, stresses, and deformations in simply supported bidirectional multilayered composite plates. The range of applicability of this procedure in terms of the plate's parameters is determined, and the potential of the proposed procedure for use in conjunction with large-scale finite element modeling of composite structures is discussed. It is shown that the use of the shear correction factors calculated by this procedure extends the range of the validity of the first-order shear deformation theory, used in the first phase of the procedure, to fairly thick multilayered plates with the h/L1 ratio of the order of 0.3.

Noor, Ahmed K.↗
NASA NTRS1988

A multilayer X-ray mirror for solar photometric imaging flown on a sounding rocket

The flight of a multilayer-coated mirror on a sounding rocket experiment on March 17, 1988 which was used to obtain photometric images of the sun just prior to solar eclipse is discussed. The rocket payload and the choice of passband are described. The design of the multilayer, the fabrication of the mirror, and the reflectance measurements are addressed.

Haisch, B. M.↗
NASA NTRS1988

A monochromator based on W/C multilayers of 40 A layer spacing

The design and preliminary performance data are presented for a monochromator based on two multilayer X-ray mirrors. The monochromator is based on mirrors with a d-spacing of 40 A and is designed to operate in the 5-75 A wavelength regime which can be varied by interchanging the mirrors with ones of different d-spacing. The multilayer mirrors are fabricated using sputter deposition and typically consist of 40 layer pairs of W and C. Except for W/Si, which shows 1-2 percent better reflectivities over the 7-40 A range but 4-10 percent poorer reflectivities for wavelengths longer than 40 A and shorter than 7 A, calculations performed using other combinations of materials generally show poorer reflectivities over the wavelength range of interest. Plans for a four-mirror version of the monochromator that will have increased resolution are also presented.

Smith, A.↗
NASA NTRS1988

Monochromatic X-ray and XUV imaging with multilayer optics

The development of techniques for the fabrication of multilayer coated mirrors which can function as energy selective X-ray and XUV mirrors at normal incidence has greatly expanded the options available to the astronomical spectroscopist. A rocket spectroheliograph which utilizes multilayer optics in three configurations has been developed. These are: (1) as Cassegrain telescopes for imaging at 256 A (He II) and 173 A (Fe IX, X); (2) as tertiary mirrors used with a conventional Wolter I telescope for imaging at 44 A (Si XI, XII), 173 A, and 256 A; and (3) as off-axis spherical mirrors for imaging at 44 A and 256 A. The paper reports on laboratory images and performance measurements obtained with these optical systems, and briefly on Solar Observations.

Walker, A. B. C., Jr.↗
NASA NTRS1989

Assessment of computational models for multilayered composite cylinders

A study is made of the effects of variation in the lamination and geometric parameters of multilayered composite cylinders on the accuracy of the static and vibrational responses predicted by eight modeling approaches, based on two-dimensional shear-deformation shell theories. The standard of comparison is taken to be the exact three-dimensional elasticity solutions, and the quantities compared include both the gross response characteristics and detailed, through-the-thickness, distributions of displacements, stresses and strain energy densities. Based on the numerical studies conducted, a predictor-corrector approach, used in conjunction with the first-order shear-deformation theory (with five displacement parameters in the predictor phase), appears to be the most effective among the eight modeling approaches considered. For multilayered orthotropic cylinders the response quantities obtained by the predictor-corrector approach are shown to be in close agreement with the exact three-dimensional elasticity solutions for a wide range of lamination and geometric parameters.

Noor, A. K.↗
NASA NTRS1991

Modular, Multilayer Perceptron

Combination of proposed modular, multilayer perceptron and algorithm for its operation recognizes new objects after relatively brief retraining sessions. (Perceptron is multilayer, feedforward artificial neural network fully connected and trained via back-propagation learning algorithm.) Knowledge pertaining to each object to be recognized resides in subnetwork of full network, therefore not necessary to retrain full network to recognize each new object.

Cheng, Li-Jen↗
NASA NTRS1990

The performance of multilayer insulation in a rapidly depressurizing environment

The performance of multilayer insulation in a rapidly depressurizing environment is determined by the variation of heat transfer with internal pressure and the pressure history of the interstitial gas. Measurements of thermal performance were made on three multilayer insulation configurations at room temperature and steady state pressures from 10(exp -6) to 10(exp -1) torr. The heat transfer due to gas conduction alone correlated with the kinetic theory of gases in the molecular flow regime. Pressure histories were measured in a unique apparatus which simulated the depressurization rate of a boost vehicle. The pressure histories on both sides of two of the configurations were measured to bound the actual interstitial pressure. The results of the two types of measurements agreed with earlier work and were combined to make performance predictions using an actual ascent pressure history.

Efromson, Ronald A.↗
NASA NTRS1990

Performance of compact multilayer coated telescopes at soft X-ray/EUV and far ultraviolet wavelengths

Compact soft X-ray/EUV (XUV) and far-ultraviolet (FUV) multilayer coated telescopes have been developed for the study of the solar chromosphere corona and corona/solar wind interface. Because they operate at short wavelengths (between about 40 and 1550 A), the modest apertures of 40 to 127 mm allow observations at very high angular resolution (0.1 to 0.7 arcsec). In addition to permitting traditional normal incidence optical configurations such as Cassegrain, Ritchey-Chretien, and Herschelian to be used at XUV wavelengths, multilayer coatings also allow a narrow wavelength band to be selected for imaging. The resulting telescopes provide a very powerful and flexible diagnostic instrument for the study of both the fine scale structure of the chromosphere/corona interface and the large scale structure of the corona and corona/solar wind interface. A new solar rocket payload, the Multi-Spectral Solar Telescope Array (MSSTA), composed of 17 of these compact telescopes, was developed. This paper reports on the performance of seven MSSTA Ritchey-Chretien telescopes.

Hoover, Richard B.↗
NASA NTRS1989

Assessment of shear deformation theories for multilayered composite plates

A review is made of the different approaches used for modeling multilayered composite plates. Discussion focuses on different approaches for developing two-dimensional shear deformation theories; classification of two-dimensional theories based on introducing plausible displacement, strain and/or stress assumptions in the thickness direction; and first-order shear deformation theories based on linear displacement assumptions in the thickness coordinate. Extensive numerical results are presented showing the effects of variation in the lamination and geometric parameters of simply supported composite plates on the accuracy of the static and vibrational responses predicted by six different modeling approaches (based on two-dimensional shear deformation theories). The standard of comparison is taken to be the exact three-dimensional elasticity solutions. Some of the future directions for research on the modeling of multilayered composite plates are outlined.

Noor, Ahmed K.↗
NASA NTRS1989

A posteriori estimates for shear correction factors in multilayered composite cylinders

A predictor-corrector approach is presented for calculating the composite shear correction factors and analyzing multilayered composite cylinders. In the predictor phase a two-dimensional first-order shear deformation theory is used to predict the gross response characteristics of the cylinder (vibration frequencies, average through-the-thickness displacements, rotations, and transverse shear strain energy per unit area) as well as the in-plane strains and stresses in the thickness direction. The three-dimensional equilibrium equations and constitutive relations are then used to compute the transverse stresses and strains as well as the transverse shear factors, and they are also used to correct the predicted response quantities of the cylinder. For simply supported multilayered cylinders the response quantities obtained by using the proposed approach are shown to be in close agreement with three-dimensional elasticity solutions for a wide range of lamination and geometric parameters. Also, the potential of the proposed approach for use in conjunction with large-scale finite element models of composite cylinders is outlined.

Noor, Ahmed K.↗
NASA NTRS1991

Diffraction by a multilayer slab recessed in a ground plane via generalized impedance boundary conditions

The diffraction problem associated with a multilayer material slab recessed in a perfectly conducting ground plane is formulated and solved via the generalized scattering matrix formulation in conjunction with the dual integral equation approach. The multilayer slab is replaced by a surface obeying a generalized impedance boundary condition to facilitate the computation of the pertinent Wiener Hopf split functions and their zeros. Both Ez and Hz polarizations are considered, and a number of scattering patterns are presented, some of which are compared to exact results available for a homogeneous recessed slab.

Ricoy, M. A.↗
NASA NTRS1991

Extreme ultraviolet performance of a multilayer coated high density toroidal grating

The performance of a multilayer coated diffraction grating has been evaluated at EUV wavelengths both in terms of absolute efficiency and spectral resolution. The application of ten-layer Ir/Si multilayer coating to a 3600-lines/mm blazed toroidal replica grating produced a factor of 9 enhancement in peak efficiency near the design wavelength of about 30 nm in first order, without degrading its excellent quasistigmatic spectral resolution. The measured EUV efficiency peaked at 3.3 percent and was improved over the full spectral range between 25 and 35 nm compared with the premultilayer replica which had a standard gold coating. In addition, the grating's spectral resolution of greater than 5000 was maintained.

Thomas, Roger J.↗
NASA NTRS1991

A simple method to derive bounds on the size and to train multilayer neural networks

A new derivation is presented for the bounds on the size of a multilayer neural network to exactly implement an arbitrary training set; namely, the training set can be implemented with zero error with two layers and with the number of the hidden-layer neurons equal to no.1 is greater than p - 1. The derivation does not require the separation of the input space by particular hyperplanes, as in previous derivations. The weights for the hidden layer can be chosen almost arbitrarily, and the weights for the output layer can be found by solving no.1 + 1 linear equations. The method presented exactly solves (M), the multilayer neural network training problem, for any arbitrary training set.

Sartori, Michael A.↗
NASA NTRS1991

High resolution imaging with multilayer soft X-ray, EUV and FUV telescopes of modest aperture and cost

The development of multilayer reflective coatings now permits soft X-ray, EUV and FUV radiation to be efficiently imaged by conventional normal incidence optical configurations. Telescopes with quite modest apertures can, in principle, achieve images with resolutions which would require apertures of 1.25 meters or more at visible wavelengths. The progress is reviewed which has been made in developing compact telescopes for ultra-high resolution imaging of the sun at soft X-ray, EUV and FUV wavelengths, including laboratory test results and astronomical images obtained with rocket-borne multilayer telescopes. The factors are discussed which limit the resolution which has been achieved so far, and the problems which must be addressed to attain, and surpass the 0.1 arc-second level. The application of these technologies to the development of solar telescopes for future space missions is also described.

Walker, Arthur B. C., Jr.↗
NASA NTRS1992

Method and apparatus for evaluating multilayer objects for imperfections

A multilayer object where the layers are arranged in a stacking direction is evaluated for imperfections such as voids, delaminations, and microcracks. First, an acoustic wave is transmitted into the object in the stacking direction via an appropriate transducer/waveguide combination. The wave propagates through the multilayer object and is received by another transducer/waveguide combination preferably located on the same surface as the transmitting combination. The received acoustic wave is correlated with the presence or absence of imperfections by generating pulse echo signals indicative of the received acoustic wave, wherein the successive signals form distinct groups over time. The respective peak amplitudes of each group are sampled and fitted to an exponential curve, wherein a substantial fit of approximately 80-90 percent indicates the absence of imperfections. Alternatively, the time interval between distinct groups can be measured, wherein equal intervals indicate the absence of imperfections and unequal intervals indicate the presence of imperfections.

Heyman, Joseph S.↗
NASA NTRS1992

Membership generation using multilayer neural network

There has been intensive research in neural network applications to pattern recognition problems. Particularly, the back-propagation network has attracted many researchers because of its outstanding performance in pattern recognition applications. In this section, we describe a new method to generate membership functions from training data using a multilayer neural network. The basic idea behind the approach is as follows. The output values of a sigmoid activation function of a neuron bear remarkable resemblance to membership values. Therefore, we can regard the sigmoid activation values as the membership values in fuzzy set theory. Thus, in order to generate class membership values, we first train a suitable multilayer network using a training algorithm such as the back-propagation algorithm. After the training procedure converges, the resulting network can be treated as a membership generation network, where the inputs are feature values and the outputs are membership values in the different classes. This method allows fairly complex membership functions to be generated because the network is highly nonlinear in general. Also, it is to be noted that the membership functions are generated from a classification point of view. For pattern recognition applications, this is highly desirable, although the membership values may not be indicative of the degree of typicality of a feature value in a particular class.

Kim, Jaeseok↗
NASA NTRS1993

Multilayer X-ray mirrors - Interfacial roughness, scattering, and image quality

Scattering of the multilayer coatings used for our normal incidence soft X-ray telescope at a wavelength of 63.5 A has been measured at 1.54 A and grazing angles of incidence and at soft X-rays near normal incidence. Furthermore, the edge of the moon is used as a known test target to estimate the amount of scattering in the arcsec range from images obtained on the date of the solar eclipse on July 11, 1991. The internal surfaces of the coating are inspected by high-resolution electron microscopy. A theoretical model describing the evolution and replication of roughness from layer to layer throughout the structure, which is in agreement with all experimental data, is presented. We find that practically all roughness caused by the growth of the multilayer structure occurs at spatial frequencies which are too high to produce scattering. The substrate roughness is replicated at lower spatial frequencies which might produce scattering within the field of view of an instrument. However, roughness in this range is below the 0.5 A level, again resulting in insignificant amounts of scatter.

Spiller, Eberhard↗