Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mount”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1958

Investigation of an underslung half-cone inlet with compression surface mounted outboard from fuselage at Mach numbers of 1.5, 1.8, and 2.0

An investigation was conducted to determine the performance of an underslung half-cone inlet mounted on a missile forebody model with the compression surface outboard from the fuselage. The inlet was designed for shock-on-lip operation at Mach number 2.0 with 25 degree half-angle spike. The cowling was attached to the fuselage through the boundary-layer plow and served as part of the fuselage boundary-layer diverter system. The performance of the half-cone inlet was compared with that of a scoop-type inlet and a normal-wedge inlet on a maximum-thrust-minus-drag basis. The increase in pressure recovery obtained with the half-cone inlet over that obtained with the reference inlets offset the slightly higher drags observed over the Mach number range for the half-cone so that the performance of this configuration was equal to that of the other inlets at Mach number 2.0 and was slightly superior at the lower Mach numbers. For a particular configuration, a peak pressure recovery of 0.879 was obtained at Mach number 2.0, zero angle of attack, and 4-percent throat bleed; the subcritical stability was 16 percent. Use of a fuselage-mounted boundary-layer splitter plate ahead of the inlet did not improve the stability. Subcritical distortion values were below 10 percent for all configurations. (author)

Yeager, Richard A↗
NASA NTRS1993

Shaft mount for data coupler system

A device for mounting a data transmission apparatus to a rotating, tapered, and instrumented shaft is provided. This device permits attachment without interfering with shaft rotation or the accuracy of data output, and prevents both radial and axial slippage of the data transmission apparatus. The mounting device consists of a sleeve assembly which is attached to the shaft by means of clamps that are situated at some distance removed from the instrumented area of the shaft. The data transmission device is secured to the sleeve such that the entire assembly rotates with the shaft. Shim adjustments between sleeve sections assure that a minimum compressive load is transferred to the instrumented area of the shaft and a rubber lining is affixed to a large portion of the interior surface of the sleeve to absorb vibration.

Elliott, James R., Jr.↗
NASA NTRS1994

Subsonic aerodynamic characteristic of semispan commercial transport model with wing-mounted advanced ducted propeller operating in reverse thrust

A test was conducted in the Langley 14 by 22 Foot Subsonic Tunnel to determine the effect of the reverse-thrust flow field of a wing-mounted advanced ducted propeller on the aerodynamic characteristics of a semispan subsonic high-lift transport model. The advanced ducted propeller (ADP) model was mounted separately in position alongside the wing so that only the aerodynamic interference of the propeller and nacelle affected the aerodynamic performance of the transport model. Mach numbers ranged from 0.14 to 0.26; corresponding Reynolds numbers ranged from 2.2 to 3.9 x 10(exp 6). The reverse-thrust flow field of the ADP shielded a portion of the wing from the free-stream airflow and reduced both lift and drag. The reduction in lift and drag was a function of ADP rotational speed and free-stream velocity. Test results included ground effects data for the transport model and ADP configuration. The ground plane caused a beneficial increase in drag and an undesirable slight increase in lift. The ADP and transport model performance in ground effect was similar to performance trends observed for out of ground effect. The test results form a comprehensive data set that supports the application of the ADP engine and airplane concept on the next generation of advanced subsonic transports. Before this investigation, the engine application was predicted to have detrimental ground effect characteristics. Ground effect test measurements indicated no critical problems and were the first step in proving the viability of this engine and airplane configuration.

Applin, Zachary T.↗
NASA NTRS1994

Stability analysis of an F/A-18 E/F cable mount m odel

A full-span F/A-18 E/F cable mounted wind tunnel model is part of a flutter clearance program at the NASA Langley Transonic Dynamics Tunnel. Parametric analysis of this model using GRUMCBL software was conducted to assess stability for wind tunnel tests. Two configurations of the F/A-18 E/F were examined. The parameters examined were pulley-cable friction, mach number, dynamic pressure, cable geometry, center of gravity location, cable tension, snubbing the model, drag, and test medium. For the nominal cable geometry (Cable Geometry 1), Configuration One was unstable for cases with higher pulley-cable friction coefficients. A new cable geometry (Cable Geometry 3) was determined in which Configuration One was stable for all cases evaluated. Configuration Two with the nominal center of gravity position was found to be unstable for cases with higher pulley-cable friction coefficients; however, the model was stable when the center of gravity moved forward 1/2. The model was tested using the cable mount system during the initial wind tunnel entry and was stable as predicted.

Thompson, Nancy↗
NASA NTRS1995

Performance of an aerodynamic yaw controller mounted on the space shuttle orbiter body flap at Mach 10

A wind-tunnel investigation of the effectiveness of an aerodynamic yaw controller mounted on the lower surface of a shuttle orbiter model body flap was conducted in the Langley 31-Inch Mach 10 Tunnel. The controller consisted of a 60 deg delta fin mounted perpendicular to the body flap lower surface and yawed 30 deg to the free stream direction. The control was tested at angles of attack from 20 deg to 40 deg at zero sideslip for a Reynolds number based on wing mean aerodynamic chord of 0.66 x 10(exp 6). The aerodynamic and control effectiveness characteristics are presented along with an analysis of the effectiveness of the controller in making a bank maneuver for Mach 18 flight conditions. The controller was effective in yaw and produced a favorable rolling moment. The analysis showed that the controller was as effective as the reaction control system in making the bank maneuver. These results warrant further studies of the aerodynamic/aerothermodynamic characteristics of the control concept for application to future transportation vehicles.

Scallion, W. I.↗
NASA NTRS1994

Heterogeneous conversion of N2O5 to HNO3 in the post-Mount Pinatubo eruption stratosphere

Simultaneous stratospheric volume mixing ration (VMR) profiles of dinitrogen pentoxide (N2O5) and nitric acid (HNO3) at sunrise between 25 deg N and 15 deg S latitude and profiles of HNO3 at sunset between 42 deg S and 53 deg S latitude have been derived from 0.01/cm resolution infrared solar occultation spectra recorded 9.5 months after the massive eruption of the Mount Pinatubo volcano in the Philippine Islands. The measurements were obtained by the atmospheric trace molecule spectroscopy (ATMOS) Fourier transform spectrometer during the ATLAS 1 shuttle mission (March 24 to April 2, 1992). The measured HNO3 VMRs are higher at all altitudes and latitudes than corresponding values measured by the limb infrared monitor of the stratosphere (LIMS) instrument during the same season in 1979, when the aerosol loading was near background levels. The largest relative increase in the HNO3 VMR occurred near the equator at 30-km altitude, where the ATMOS/ATLAS 1 values are about a factor of 2 higher than the LIMS measurements. Two-dimensional model calculations show that the increase in HNO3 and the ATMOS/ATLAS 1 measurement of a steep decrease in the N2O5 VMR below 30 km can be explained by the enhanced conversion of N2O5 to HNO3 on the surfaces of the Mount Pinatubo sulfate aerosols. Our profile results demonstrate the global impact of the N2O5 + H2O yields 2HNO3 heterogeneous reaction in altering the partitioning of stratospheric odd nitrogen after a major volcanic eruption.

Rinsland, C. P.↗
NASA NTRS1994

Gravity survey of the Mount Toondina impact structure, South Australia

Gravity and seismic reflection data, together with geologic mapping, indicate that the Mount Toondina feature in South Australia is best interpreted as an eroded 4-km-diameter impact structure consisting of a ring structural depression surrounding a pronounced central uplift. Beds at the center of the structure within the central uplift have been raised as much as 200 m from depth and deformed by convergent flow. Seismic reflection data indicate that deformation extends to depths of only approximately = 800 m; at greater depths the reflectors are nearly flat lying, indicating little or no deformation. Gravity data show residual anomalies of +1.0 mGal coincident with the central uplift and a -0.5 Mgal low associated with the ring structural depression. Modeling of the gravity data indicates that relatively high-density material occurs within the central uplift, whereas the ring depression is filled with low-density material. The deformation at Mount Toondina is typical of a complex impact crater; the 4-km diameter is consistent with the expected threshold size for complex craters formed in weak to moderate strength sedimentary rocks.

Plescia, J. B.↗
NASA NTRS1998

Maintaining Flatness of a Large Aperture Potassium Bromide Beamsplitter Through Mounting and Vibration

The Composite Infrared Spectrometer (CIRS) instrument on the Cassini Mission launched in October of 1997. The CIRS instrument contains a mid-infrared (MIR) and a far-infrared interferometer (FIR) and operates at 170 Kelvin. The MIR is a Michelson Fourier transform spectrometer utilizing a 76 mm (3 inch) diameter potassium bromide beamsplitter and compensator pair. The potassium bromide elements were tested to verify effects of cooldown and vibration prior to integration into the instrument. The instrument was then aligned at ambient temperatures, tested cryogenically and re-verified after vibration. 'Me stringent design optical figure requirements for the beamsplitter and compensator included fabrication errors, mounting stresses and vibration load effects. This paper describes the challenges encountered in mounting the elements to minimize distortion and to survive vibration.

Losch, Patricia↗
NASA NTRS1998

Maintaining Flatness of a Large Aperture Potassium Bromide Beamsplitter through Mounting and Vibration

The Composite Infrared Spectrometer (CIRS) instrument on the Cassini Mission launched in October of 1997. The CIRS instrument contains a mid-infrared and a far-infrared interferometer and operates at 170 Kelvin. The mid-infrared interferometer is a Michelson- type Fourier transform spectrometer utilizing a 3 inch diameter potassium bromide beamsplitter/compensator pair. The potassium bromide elements were tested to verify effects of cooldown and vibration prior to integration into the instrument. The instrument was then aligned at ambient temperatures, tested cryogenically and re-verified after vibration. The stringent design optical figure requirements for the beamsplitter and compensator included fabrication errors, mounting stresses and vibration load effects. This paper describes the challenges encountered in mounting the elements to minimize distortion and to survive vibration.

Losch, Patricia↗
NASA NTRS1981

Reports from Science Mount St. Helens

The following reports describe extensive measurements of the properties of the gases and aerosols (particles) in the volcanic clouds produced by the eruptions of Mount St. Helens from March through August 1980. Volcanic material was first injected into the atmosphere on 27 March 1980. This material, as well as that introduced by subsequent eruptions during the next 2 months, was confined to the troposphere. On 18 May the first of several major explosions occurred in which some of the volcanic cloud penetrated well into the stratosphere. The nature of the volcanic activity at Mount St. Helens from the end of March through June was described.

Pollack, James B.↗
NASA NTRS1999

Code Calibration Applied to the TCA High-Lift Model in the 14 x 22 Wind Tunnel (Simulation With and Without Model Post-Mount)

The objective of this study is to calibrate a Navier-Stokes code for the TCA (30/10) baseline configuration (partial span leading edge flaps were deflected at 30 degs. and all the trailing edge flaps were deflected at 10 degs). The computational results for several angles of attack are compared with experimental force, moments, and surface pressures. The code used in this study is CFL3D; mesh sequencing and multi-grid were used to full advantage to accelerate convergence. A multi-grid approach was used similar to that used for the Reference H configuration allowing point-to-point matching across all the trailingedge block interfaces. From past experiences with the Reference H (ie, good force, moment, and pressure comparisons were obtained), it was assumed that the mounting system would produce small effects; hence, it was not initially modeled. However, comparisons of lower surface pressures indicated the post mount significantly influenced the lower surface pressures, so the post geometry was inserted into the existing grid using Chimera (overset grids).

Lessard, Wendy B.↗
NASA NTRS2000

Noise Reduction Potential of Large, Over-the-Wing Mounted, Advanced Turbofan Engines

As we look to the future, increasingly stringent civilian aviation noise regulations will require the design and manufacture of extremely quiet commercial aircraft. Indeed, the noise goal for NASA's Aeronautics Enterprise calls for technologies that will help to provide a 20 EPNdB reduction relative to today's levels by the year 2022. Further, the large fan diameters of modem, increasingly higher bypass ratio engines pose a significant packaging and aircraft installation challenge. One design approach that addresses both of these challenges is to mount the engines above the wing. In addition to allowing the performance trend towards large, ultra high bypass ratio cycles to continue, this over-the-wing design is believed to offer noise shielding benefits to observers on the ground. This paper describes the analytical certification noise predictions of a notional, long haul, commercial quadjet transport with advanced, high bypass engines mounted above the wing.

Berton, Jeffrey J.↗
NASA NTRS1995

Color Helmet Mounted Display System with Real Time Computer Generated and Video Imagery for In-Flight Simulation

NASA Ames Research Center and the US Army are developing the Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) using a Sikorsky UH-60 helicopter for the purpose of flight systems research. A primary use of the RASCAL is in-flight simulation for which the visual scene will use computer generated imagery and synthetic vision. This research is made possible in part to a full color wide field of view Helmet Mounted Display (HMD) system that provides high performance color imagery suitable for daytime operations in a flight-rated package. This paper describes the design and performance characteristics of the HMD system. Emphasis is placed on the design specifications, testing, and integration into the aircraft of Kaiser Electronics' RASCAL HMD system that was designed and built under contract for NASA. The optical performance and design of the Helmet mounted display unit will be discussed as well as the unique capabilities provided by the system's Programmable Display Generator (PDG).

Sawyer, Kevin↗
NASA NTRS2000

Life associated with a 2.76 Ga ephemeral pond?: evidence from Mount Roe #2 paleosol

Dark sericitic material at and near the top of the 2.765 +/- 0.01 Ga Mount Roe #2 paleosol in Western Australia contains 0.05-0.10 wt% organic carbon with delta 13C values between -33% and -51% PDB (Peedee belemnite). Such negative isotopic values strongly indicate that methanotrophs once inhabited this material. The textures and the chemical composition of the dark sericitic material indicate that the methanotrophs lived in or at the edges of ephemeral ponds, that these ponds became desiccated, and that heavy rains transported the material to its present sites. The discovery of methanotrophs associated with the Mount Roe #2 paleosol may extend their geologic record on land by at least 1.5 b.y. Methanotrophy in this setting is consistent with the notion that atmospheric methane levels were > or = 20 (mu)atm during the Late Archean. The radiative forcing due to such high atmospheric methane levels could have compensated for the faint younger sun and helped to prevent massive glaciation during the Late Archean.

Non-NASA Center↗
NASA NTRS1954

Wind-Tunnel Investigation of the Effects on the Aerodynamic Characteristics of Modifications to a Model of a Bomb Mounted on a Wing-Fuselage Model and to a Model of the Bomb Alone

An investigation was conducted in the Langley high-speed 7- by 10-foot tunnel to determine effects of modifications to a bomb model (particularly with regard to drag) when mounted on a wing-fuselage model and tested at Mach numbers from 0.70 to 1.10. In addition, the static longitudinal stability characteristics of several configurations of a larger scale model of the bomb alone were obtained over a Mach number range from 0.50 to 0.95. The results obtained for the wing-fuselage-bomb model indicate that large reductions in installation drag were obtained for the wing-fuselage-bomb model when the flat nose of the basic bomb was replaced by rounded or pointed noses of various calibers. Shortening the mounting pylon gave further decreases in the installation drag. The tests of the bomb alone indicated that only the flat-nose configurations were stable over the greater part of the Mach number range. Nose-shape modifications which improved the drag also caused the bombs to become unstable at low angles of attack. The stability of the low-drag bomb configurations could be improved by lengthening the cylindrical portion of the body behind the center of gravity.

King, Thomas J., Jr.↗
NASA NTRS2000

Noise-Reduction Benefits Analyzed for Over-the-Wing-Mounted Advanced Turbofan Engines

As we look to the future, increasingly stringent civilian aviation noise regulations will require the design and manufacture of extremely quiet commercial aircraft. Also, the large fan diameters of modern engines with increasingly higher bypass ratios pose significant packaging and aircraft installation challenges. One design approach that addresses both of these challenges is to mount the engines above the wing. In addition to allowing the performance trend towards large diameters and high bypass ratio cycles to continue, this approach allows the wing to shield much of the engine noise from people on the ground. The Propulsion Systems Analysis Office at the NASA Glenn Research Center at Lewis Field conducted independent analytical research to estimate the noise reduction potential of mounting advanced turbofan engines above the wing. Certification noise predictions were made for a notional long-haul commercial quadjet transport. A large quad was chosen because, even under current regulations, such aircraft sometimes experience difficulty in complying with certification noise requirements with a substantial margin. Also, because of its long wing chords, a large airplane would receive the greatest advantage of any noise-shielding benefit.

Berton, Jeffrey J.↗
NASA NTRS1994

Motion Control of Rover-Mounted Manipulators

This paper presents a simple online approach for motion control of rover-mounted manipulators. An integrated kinetic model of the rover-plus-manipulator system is derived which incorporates the nonholonomic rover constraint with the holonomic end-effector constraint. The redundancy introduced by the rover mobility is exploited to perform a set of user-specified additional tasks during end-effector motion. The configuration control approach is utilized to satisfy the nonholonomic rover constraint, while accomplishing the end-effector motion and the redundancy resolution goal simultaneously. This framework allows the user to assign weighting factors to the rover movement and manipulator motion, as well as to each task specification. The computational efficiency of the control scheme makes it particularly suitable for real-time implementation. The proposed method is applied to a planar two-jointed arm mounted on a rover, and computer simulation results are presented for illustration.

robotics rover manipulator holonomic end-effector ↗