Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesh data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Molecular-dynamics study of amorphous SiO{sub 2} relaxation

Using Molecular-Dynamics simulation we observed the generation of amorphous SiO{sub 2} target from a randomly distributed Si and O atoms. We applied a sequence of annealing of the target with various temperature and quenching to room temperature. The relaxation time required by the system to form SiO{sub 4} tetrahedral mesh after a relatively long simulation time, is studied. The final amorphous target was analyzed using the radial distribution function method, which can be compared with the available theoretical and experimental data. We found that up to 70% of the target atoms form the tetrahedral SiO{sub 4} molecules. The number of formed tetrahedral increases following the growth function and the rate of SiO{sub 4} formation follows Arrhenius law, depends on the annealing temperature. The local structure of amorphous SiO{sub 2} after this treatment agrees well with those reported in some literatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MOSCATO Development and Integration in Fiscal Year 2024

MOSCATO (Molten Salt Chemistry and Transport) is a multiphysics code that provides high-fidelity, coupled simulations of fluid flow, heat transfer, mass transfer, chemistry, electrochemical phenomena, and alloy evolution for molten salt equipment. In FY24, significant developments were made to the code package, enhancing its capabilities in many aspects. The improvements and advancements can be summarized as follows: 1. Implementation of tritium transport capabilities and validation with experimental data: To enable modeling of tritium and other fission gases within MSRs, we implemented gas transport within MOSCATO via inclusion of couple mass transport equations within the salt and structural alloys. Comparisons to experimental data from literature showed good agreement with respect to tritium release rates. 2. Preliminary implementation of two-phase flow models in MOSCATO: To model tritium and other gases above their solubility limits, we implemented preliminary two-phase flow models within MOSCATO to account for bubble transport. The first model adopted was the Level-Set approach, which can handle the high void fraction regime, but with a requirement for high mesh resolution thus high computational expense. In this report, we present a verification of the Level-Set method using a simple benchmark case. We also performed a demonstration of the code as applied to an experimental case involving cover gas flow through salt in an experimental vessel. The second model adopted was the Eulerian-Eulerian dispersed flow model, which is computationally cheaper but limited to low void fraction regimes, such as bubbly flow. Validation and verification have not yet been performed for the Eulerian-Eulerian approach, but a preliminary implementation was completed. 3. Validation with static corrosion experiments: Static corrosion experimental data for stainless steel coupons within molten salts was used to further validate the corrosion model in MOSCATO. To do so, we leveraged the existing models in MOSCATO and simulated the sample mass loss and mass gain phenomena. Several ion species, including Cr 2+ , Fe 2+ and H + , were simulated in salt using the PNP solver, while Cr 0 and Fe 0 were simulated with a diffusion solver in stainless steel. The mass loss of the samples was compared with experimental data, and good agreement was achieved. These combined activities served to further expand the capabilities of MOSCATO and make it more generally applicable to the full range of phenomena that can control chemistry and corrosion in molten salt reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Communication-Avoiding 3D LU Factorization Algorithm for Sparse Matrices

We propose a new algorithm to improve the strong scalability of right-looking sparse LU factorization on distributed memory systems. Our 3D sparse LU algorithm uses a three-dimensional MPI process grid, aggressively exploits elimination tree parallelism and trades off increased memory for reduced per-process communication. We also analyze the asymptotic improvements for planar graphs (e.g., from 2D grid or mesh domains) and certain non-planar graphs (specifically for 3D grids and meshes). For planar graphs with n vertices, our algorithm reduces communication volume asymptotically in n by a factor of O{log n} and latency by a factor of O{log n}. For non-planar cases, our algorithm can reduce the per-process communication volume by 3× and latency by O{n^1/3} times. In all cases, the memory needed to achieve these gains is a constant factor. We implemented our algorithm by extending the 2D data structure used in superLU. Our new 3D code achieves speedups up to 27× for planar graphs and up to 3.3× for non-planar graphs over the baseline 2D superLU when run on 24,000 cores of a Cray XC30.

Sao, Piyush↗

Parallelization and Performance Portability in Hydrodynamics Codes

With the eve of Exascale computing, performance and portability are at the forefront of all scientific codes. Adding more cores and more energy to a system is no longer a sustainable way to achieve performance, and extra effort must now be made to improve performance in all areas of code and code development. Using hydrodynamic codes as a basis, this work explores numerous techniques to achieve performance in different ways. Adaptive mesh refinement (AMR) is a necessary technique to improve memory optimization in mesh-based simulations. However it is invasive and conventionally difficult to integrate into existing applications, so we present a new branch of AMR to create a smooth transition to these optimizations, which not only improves performance, but also greatly reduces developer effort. We introduce the concept of this improvement as Phantom-Cell AMR, and assess theoretically the improvements, as well as present an application of its use. Other work included involves and investigation into an efficient data structure that ensures optimal memory layout for cache performance, with a target of making codes performant and portable across all architectures. All of the work targets both performance and portability, not just on CPU hardware, but specifically across GPU architectures. Parallel performance is key to all of the methods presented, but the research makes a great effort to improve the portability of all applications to prepare for current high performance computing systems and those on the horizon.

97 MATHEMATICS AND COMPUTING↗

Self-Excited, Multi-kHz Dynamics in a Linear, Semi-Bounded Detonation Channel

A linear, semi-bounded detonation channel was studied to characterize the injection, mixing, and ignition process in a two dimensional analog of a rotating detonation wave combustor (RDWC). The linear channel was developed to provide large optical accessibility in support of high-fidelity diagnostics. The canonical geometry was also chosen to support the generation of future numerical validation. A high degree of modularity was designed into the combustor to allow for testing multiple injector con figurations, and for reconfiguring the high-frequency instrumentation and optical window locations. Initial experiments have shown the presence of self-excited, multi-kHz combustion waves that bear the distinct characteristics of detonation waves. High-frequency pressure data details the dynamic response to detonation propagation in the combustor. The role of manifold-chamber coupling is investigated as the mechanism behind the formation of self-excited detonation waves in the combustor. We explore the formation of the waves using Schlieren imaging techniques and examine the structures present within the reaction zone and the interface between reactants and products. Companion computations were carried out using an in-house CFD solver GEMS(General Equations and Mesh Solver) to develop understanding of the structure and dynamics of the flow, flame, and their coupled interactions.

Schwinn, Kyle S.↗

Automated segmentation of soft X-ray tomography: Native cellular structure with submicron resolution at high-throughput for whole-cell quantitative imaging in yeast

Soft X-ray tomography (SXT) is an invaluable tool for quantitatively analyzing cellular structures at suboptical isotropic resolution. However, it has traditionally depended on manual segmentation, limiting its scalability for large datasets. Here, we leverage a deep learning-based autosegmentation pipeline to segment and label cellular structures in hundreds of cells across three Saccharomyces cerevisiae strains. This task-based pipeline uses manual iterative refinement to improve segmentation accuracy for key structures, including the cell body, nucleus, vacuole, and lipid droplets, enabling high-throughput and precise phenotypic analysis. Using this approach, we quantitatively compared the three-dimensional (3D) whole-cell morphometric characteristics of wild-type, VPH1-GFP, and vac14 strains, uncovering detailed strain-specific cell and organelle size and shape variations. We show the utility of SXT data for precise 3D curvature analysis of entire organelles and cells and detection of fine morphological features using surface meshes. Our approach facilitates comparative analyses with high spatial precision and statistical throughput, uncovering subtle morphological features at the single-cell and population level. This workflow significantly enhances our ability to characterize cell anatomy and supports scalable studies on the mesoscale, with applications in investigating cellular architecture, organelle biology, and genetic research across diverse biological contexts.

Chen, Jianhua [Lawrence Berkeley National Laborato↗

Towards district scale flood simulations using conventional and anisotropic porosity shallow water models with high-resolution topographic information

Current topographic survey technology provides high-resolution (HR) datasets for urban environments. Incorporating this HR information in models aiming to provide flood risk assessment is desirable because the flood wave propagation is depending on the urban topographic features, i.e. buildings, bridges and street networks. Conceptual, numerical and practical challenges arise from the application of shallow water models to HR urban flood modeling. For example, numerical challenges are occurrence of wet-dry fronts, geometric discontinuities in the urban environment and discontinuous solutions, i.e. shock waves. These challenges can be overcome by using a Godunov-type scheme. However, the computational cost of this type of schemes is high, such that HR two-dimensional shallow water simulations with practical relevance have to be run on supercomputers. The porous shallow water model is an alternative approach that aims to reduce computational cost by using a coarse resolution and accounting for unresolved processes by means of the porosity terms. Usually, a speedup between two and three orders of magnitude in comparison to HR simulations can be obtained. This study presents preliminary results of a practical test case concerning pluvial flooding in a district of the city of Nice, France, caused by the intense rainfall event on October 3rd, 2015. HR topography data set on a 1 m resolution is available for the district, whereby street features of infra-metric dimensions have been included. A reference solution is calculated by a HR shallow water model on a 1 m by 1 m structured computational grid. The porous shallow water model is run on a 10 m by 10 m grid and the influence of the drag source term is studied. The model calculations show a large deviation, which is caused by the poor meshing strategy of the porous shallow water (AP) model. The study also summarizes practical challenges that arise during the application of the AP and HR models to a large urban catchment. The main difficulty is to obtain a good mesh. In smaller scale investigations, the mesh is currently constructed by hand such that the cell edges align with buildings. This approach is not feasible for large scale urban catchments with a large number of buildings. Future steps that have to be taken, such as a strategy for automatic mesh generation, are reported on.

42 ENGINEERING↗

Micro-CT analysis and mechanical properties of Ti spherical and polyhedral void composites made with saccharose as a space holder material

The paper describes the formation, morphology and mechanical properties of Ti void composites. The Ti void composites were made using 100 and 325 mesh Ti powder for solid scaffold formation. The spherical and polyhedral voids (pores) were formed using saccharose particles (table sugar) of different shapes. The Ti void composite morphology was investigated by microcomputed tomography and scanning electron microscopy. The Ti void composites of designed porosity of 50–70% were made. Compression test was applied for mechanical properties estimation. It has been found, that Ti void composites made from 100 mesh Ti and those having spherical pores have a higher strength and elastic modulus, i.e. for the designed porosity of 50% for 100 and 325 mesh Ti void composites, a compressive strength was 32.32 and 20.13 MPa, respectively. It has been shown that this is related to better sintering of the 100 mesh Ti powders compared with the 325 mesh Ti powders. A correlation between microcomputed tomography data and mechanical properties has also been shown. The Ti void composites, made with the use of saccharose as a space holder, described in this work should be a promising material for biomedical applications, where interconnected pores and good mechanical properties are required. - Highlights: • Ti scaffolds of the porosity of 50–70% were made. • Saccharose particles as space holder were applied. • The voids in the scaffolds were designed with spherical and polyhedral shape. • The scaffold structure was investigated by SEM and micro-CT. • Micro-CT data and mechanical properties of the Ti scaffold have been correlated.

36 MATERIALS SCIENCE↗

Parallel Block Structured Adaptive Mesh Refinement on Graphics Processing Units

Block-structured adaptive mesh refinement is a technique that can be used when solving partial differential equations to reduce the number of zones necessary to achieve the required accuracy in areas of interest. These areas (shock fronts, material interfaces, etc.) are recursively covered with finer mesh patches that are grouped into a hierarchy of refinement levels. Despite the potential for large savings in computational requirements and memory usage without a corresponding reduction in accuracy, AMR adds overhead in managing the mesh hierarchy, adding complex communication and data movement requirements to a simulation. In this paper, we describe the design and implementation of a native GPU-based AMR library, including: the classes used to manage data on a mesh patch, the routines used for transferring data between GPUs on different nodes, and the data-parallel operators developed to coarsen and refine mesh data. We validate the performance and accuracy of our implementation using three test problems and two architectures: an eight-node cluster, and over four thousand nodes of Oak Ridge National Laboratory’s Titan supercomputer. Our GPU-based AMR hydrodynamics code performs up to 4.87× faster than the CPU-based implementation, and has been scaled to over four thousand GPUs using a combination of MPI and CUDA.

97 MATHEMATICS AND COMPUTING↗

Resident Block-Structured Adaptive Mesh Refinement on Thousands of Graphics Processing Units, In: 2015 44th International Conference on Parallel Processing

Block-structured adaptive mesh refinement (AMR) is a technique that can be used when solving partial differential equations to reduce the number of cells necessary to achieve the required accuracy in areas of interest. These areas (shock fronts, material interfaces, etc.) are recursively covered with finer mesh patches that are grouped into a hierarchy of refinement levels. Despite the potential for large savings in computational requirements and memory usage without a corresponding reduction in accuracy, AMR adds overhead in managing the mesh hierarchy, adding complex communication and data movement requirements to a simulation. In this paper, we describe the design and implementation of a resident GPU-based AMR library, including: the classes used to manage data on a mesh patch, the routines used for transferring data between GPUs on different nodes, and the data-parallel operators developed to coarsen and refine mesh data. We validate the performance and accuracy of our implementation using three test problems and two architectures: an 8 node cluster, and 4,196 nodes of Oak Ridge National Laboratory's Titan supercomputer. Our GPU-based AMR hydrodynamics code performs up to 4.87× faster than the CPU-based implementation, and is scalable on 4,196 K20x GPUs using a combination of MPI and CUDA.

Computer Science↗

Reduced-Order CFD Modeling to Support Waste Loading Optimization in Hanford WTP Vitrification

The U.S. DOE Hanford Site stores over 56 million gallons of radioactive liquid tank waste that must be treated and immobilized for long-term disposal The Waste Treatment and Immobilization Plant (WTP) will vitrify this waste by feeding it into Joule-heated melters, where it is incorporated into a stable borosilicate glass Computational fluid dynamics (CFD) simulations of glass melters can provide insight into the maximum achievable waste loading under varying melter operating conditions Fully resolved VOF multiphase simulations were used as the reference model to capture bubble-driven convection in the melter, including bubble formation, rise behavior, and induced glass melt circulation Effective bubble column diameter and rise velocity were extracted from the resolved simulations, compared with empirical correlations, and refit across relevant viscosity and gas flow rate conditions Explicit gas–liquid interface tracking was replaced with a single-phase momentum source term model, enabling faster steady-state CFD simulations while preserving the dominant hydrodynamic effects of bubbling New empirical correlations were developed for effective bubble column diameter and bubble rise velocity by fitting resolved simulation data across expected melter viscosity and gas flow rate ranges, providing improved inputs for the momentum source term model compared with existing literature correlations The momentum source term model reduced fluid-domain mesh size by 89% and achieved an 8.4× computational speedup relative to resolved bubbling simulations The validated momentum source term approach enables prediction of process-relevant heat transfer behavior in the integrated melter model, including heat transfer from the molten glass to the cold cap, plenum, refractory walls, and surrounding structural regions under varying melter operating conditions

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗

A communication-avoiding 3D algorithm for sparse LU factorization on heterogeneous systems

We propose a new algorithm to improve the strong scalability of right-looking sparse LU factorization on distributed memory systems. Our 3D algorithm for sparse LU uses a three-dimensional MPI process grid, exploits elimination tree parallelism, and trades off increased memory for reduced per-process communication. We also analyze the asymptotic improvements for planar graphs (e.g., those arising from 2D grid or mesh discretizations) and certain non-planar graphs (specifically for 3D grids and meshes). For a planar graph with $n$ vertices, our algorithm reduces communication volume asymptotically in $n$ by a factor of $\mathscr{O}$ $\Big(\sqrt{log \ n}\Big)$ and latency by a factor of $\mathscr{O}$ $(log \ n)$. For nonplanar cases, our algorithm can reduce the per-process communication volume by 3× and latency by $\mathscr{O}$ $\Big(n^\frac13\Big)$ times. In all cases, the memory needed to achieve these gains is a constant factor. We implemented our algorithm by extending the 2D data structure used in SuperLU_DIST. Our new 3D code achieves empirical speedups up to 27× for planar graphs and up to 3.3× for non-planar graphs over the baseline 2D SuperLU_DIST when run on 24,000 cores of a Cray XC30. We extend the 3D algorithm for heterogeneous architectures by adding the Highly Asynchronous Lazy Offload (Halo) algorithm for co-processor offload. On 4096 nodes of a Cray XK7 with 32,768 CPU cores and 4096 Nvidia K20x GPUs, the 3D algorithm achieves empirical speedups up to 24× for planar graphs and 3.5× for non-planar graphs over the baseline 2D SuperLU_DIST with co-processor acceleration.

97 MATHEMATICS AND COMPUTING↗

Underground coal mine monitoring with wireless sensor networks - article no. 10

Environment monitoring in coal mines is an important application of wireless sensor networks (WSNs) that has commercial potential. We discuss the design of a Structure-Aware Self-Adaptive WSN system, SASA. By regulating the mesh sensor network deployment and formulating a collaborative mechanism based on a regular beacon strategy, SASA is able to rapidly detect structure variations caused by underground collapses. We further develop a sound and robust mechanism for efficiently handling queries under instable circumstances. A prototype is deployed in a real coal mine. We present our implementation experiences as well as the experimental results. To better evaluate the scalability and reliability of SASA, we also conduct a large-scale trace-driven simulation based on real data collected from the experiments.

01 COAL, LIGNITE, AND PEAT↗

Geomechanical Simulation of Bayou Choctaw Strategic Petroleum Reserve - Model Calibration.

A finite element numerical analysis model has been constructed that consists of a realistic mesh capturing the geometries of Bayou Choctaw (BC) Strategic Petroleum Reserve (SPR) site and multi - mechanism deformation ( M - D ) salt constitutive model using the daily data of actual wellhead pressure and oil - brine interface. The salt creep rate is not uniform in the salt dome, and the creep test data for BC salt is limited. Therefore, the model calibration is necessary to simulate the geomechanical behavior of the salt dome. The cavern volumetric closures of SPR caverns calculated from CAVEMAN are used for the field baseline measurement. The structure factor, A 2 , and transient strain limit factor, K 0 , in the M - D constitutive model are used for the calibration. The A 2 value obtained experimentally from the BC salt and K 0 value of Waste Isolation Pilot Plant (WIPP) salt are used for the baseline values. T o adjust the magnitude of A 2 and K 0 , multiplication factors A2F and K0F are defined, respectively. The A2F and K0F values of the salt dome and salt drawdown skins surrounding each SPR cavern have been determined through a number of back fitting analyses. The cavern volumetric closures calculated from this model correspond to the predictions from CAVEMAN for six SPR caverns. Therefore, this model is able to predict past and future geomechanical behaviors of the salt dome, caverns, caprock , and interbed layers. The geological concerns issued in the BC site will be explained from this model in a follow - up report .

58 GEOSCIENCES↗

Morphological Expression of the Coherence and Relative Phase of Optical Inputs to the Photoelectrodeposition of Nanopatterned Se–Te Films

Highly anisotropic and ordered nanoscale lamellar morphologies can be spontaneously generated over macroscopic areas, without the use of a photomask or any templating agents, via the photoelectrodeposition of Se–Te alloy films. To form such structures, the light source can be a single, linearly polarized light source that need not necessarily be highly coherent. In this work, the variation in the morphologies produced by this deposition process was evaluated in response to differences in the coherence and relative phase between multiple simultaneous linearly polarized illumination inputs. Specifically, the morphologies of photoelectrodeposits were evaluated when two tandem same-wavelength sources with discrete linear polarizations, both either mutually incoherent or mutually coherent (with defined phase differences), were used. Additionally, morphologies were simulated via computer modeling of the interfacial light scattering and absorption during the photoelectrochemical growth process. The morphologies that were generated using two coherent, in-phase sources were equivalent to those generated using only a single source. In contrast, the use of two coherent, out-of-phase sources produced a range of morphological patterns. For small out-of-phase addition of orthogonal polarization components, lamellar-type patterns were observed. When fully out-of-phase orthogonal sources (circular polarization) were used, an isotropic, mesh-type pattern was instead generated, similar to that observed when unpolarized illumination was utilized. In intermediate cases, anisotropic lamellar-type patterns were superimposed on the isotropic mesh-type patterns, and the relative height between the two structures scaled with the amount of out-of-phase addition of the orthogonal polarization components. Similar results were obtained when two incoherent sources were utilized. In every case, the long axis of the lamellar-type morphology component aligned parallel to the intensity-weighted average polarization orientation. The observations consistently agreed with computer simulations, indicating that the observed morphologies were fully determined by the nature of the illumination utilized during the growth process. Here, the collective data thus indicated that the photoelectrodeposition process exhibits sensitivity toward the coherency, relative phase, and polarization orientations of all optical inputs and that this sensitivity is physically expressed in the morphology of the deposit.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Geomechanical Model Calibration Using Field Measurements for a Petroleum Reserve

A finite element numerical analysis model has been constructed that consists of a mesh that effectively captures the geometries of Bayou Choctaw (BC) Strategic Petroleum Reserve (SPR) site and multimechanism deformation (M-D) salt constitutive model using the daily data of actual wellhead pressure and oil–brine interface location. The salt creep rate is not uniform in the salt dome, and the creep test data for BC salt are limited. Therefore, the model calibration is necessary to simulate the geomechanical behavior of the salt dome. The cavern volumetric closures of SPR caverns calculated from CAVEMAN are used as the field baseline measurement. The structure factor, A 2 , and transient strain limit factor, K o , in the M-D constitutive model are used for the calibration. The value of A 2 , obtained experimentally from BC salt, and the value of K o , obtained from Waste Isolation Pilot Plant salt, are used for the baseline values. To adjust the magnitude of A 2 and K0, multiplication factors A 2 F and K o F are defined, respectively. The A 2 F and K0F values of the salt dome and salt drawdown skins surrounding each SPR cavern have been determined through a number of back analyses. The cavern volumetric closures calculated from this model correspond to the predictions from CAVEMAN for six SPR caverns. Therefore, this model is able to predict behaviors of the salt dome, caverns, caprock, and interbed layers. In conclusion, the geotechnical concerns associated with the BC site from this analysis will be explained in a follow-up paper.

02 PETROLEUM↗

Using sound pulses to solve the crystal-harvesting bottleneck

Crystal harvesting has proven to be difficult to automate and remains the rate-limiting step for many structure-determination and high-throughput screening projects. This has resulted in crystals being prepared more rapidly than they can be harvested for X-ray data collection. Fourth-generation synchrotrons will support extraordinarily rapid rates of data acquisition, putting further pressure on the crystal-harvesting bottleneck. Here, a simple solution is reported in which crystals can be acoustically harvested from slightly modified MiTeGen In Situ -1 crystallization plates. This technique uses an acoustic pulse to eject each crystal out of its crystallization well, through a short air column and onto a micro-mesh (improving on previous work, which required separately grown crystals to be transferred before harvesting). Crystals can be individually harvested or can be serially combined with a chemical library such as a fragment library.

36 MATERIALS SCIENCE↗