Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “level set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dual-Baseline Search for Active-to-Sterile Neutrino Oscillations in NOvA

We report a search for neutrino oscillations to sterile neutrinos under a model with three active and one sterile neutrinos (3+1 model). This analysis uses the NOvA detectors exposed to the NuMI beam, running in neutrino mode. The data exposure, 13.6 × 10 20 protons on target, doubles that previously analyzed by NOvA, and the analysis is the first to use 𝜈 𝜇 charged-current interactions in conjunction with neutral-current interactions. Neutrino samples in the near and far detectors are fitted simultaneously, enabling the search to be carried out over a Δ⁢𝑚$^{2}_{41}$ range extending 2 (3) orders of magnitude above (below) 1 eV 2 . NOvA finds no evidence for active-to-sterile neutrino oscillations under the 3+1 model at 90% confidence level. New limits are reported in multiple regions of parameter space, excluding some regions currently allowed by IceCube at 90% confidence level. We additionally set the most stringent limits for anomalous 𝜈 𝜏 appearance for Δ⁢𝑚$^{2}_{41}$ ≤ 3 eV 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Search for Lepton-Flavor-Violating Decay Modes 𝐵 0 →𝐾$^0_𝑆$⁢𝜏 ± ⁢ℓ ∓ with Hadronic 𝐵 Tagging at Belle and Belle II

We present the first search for the lepton-flavor-violating decay modes 𝐵 0 →𝐾$^0_𝑆$⁢𝜏 ± ⁢ℓ ∓ (ℓ=𝜇,𝑒) using the 711 and 365 fb −1 data samples recorded by the Belle and Belle II detectors, respectively. We use a hadronic 𝐵-tagging technique to fully reconstruct a 𝐵 meson and search for signal decays in the system recoiling against the tagged meson, considering 𝜏 decays to either light leptons, one charged hadron, or one charged hadron and a neutral pion. We find no evidence for 𝐵 0 →𝐾$^0_𝑆$⁢𝜏 ± ⁢ℓ ∓ decays and set 90% confidence level upper limits on the branching fractions in the range of [0.8,3.6] ×10 −5 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Genetic and biochemical characterization of a radical SAM enzyme required for post-translational glutamine methylation of methyl-coenzyme M reductase

ABSTRACT Methyl-coenzyme M reductase (MCR), the key catalyst in the anoxic production and consumption of methane, contains an unusual 2-methylglutamine residue within its active site. In vitro data show that a B12-dependent radical SAM (rSAM) enzyme, designated MgmA, is responsible for this post-translational modification (PTM). Here, we show that two different MgmA homologs are able to methylate MCR in vivo when expressed in Methanosarcina acetivorans , an organism that does not normally possess this PTM. M. acetivorans strains expressing MgmA showed small, but significant, reductions in growth rates and yields on methylotrophic substrates. Structural characterization of the Ni(II) form of Gln-methylated M. acetivorans MCR revealed no significant differences in the protein fold between the modified and unmodified enzyme; however, the purified enzyme contained the heterodisulfide reaction product, as opposed to the free cofactors found in eight prior M. acetivorans MCR structures, suggesting that substrate/product binding is altered in the modified enzyme. Structural characterization of MgmA revealed a fold similar to other B12-dependent rSAMs, with a wide active site cleft capable of binding an McrA peptide in an extended, linear conformation. IMPORTANCE Methane plays a key role in the global carbon cycle and is an important driver of climate change. Because MCR is responsible for nearly all biological methane production and most anoxic methane consumption, it plays a major role in setting the atmospheric levels of this important greenhouse gas. Thus, a detailed understanding of this enzyme is critical for the development of methane mitigation strategies.

Rodriguez Carrero, Roy J. (ORCID:0000000184475641)↗
DOE OSTI2020

Search for direct pair production of supersymmetric partners to the $\tau$ lepton in proton–proton collisions at $\sqrt{s}=13\,\text {TeV} $

A search is presented for $\tau$ slepton pairs produced in proton-proton collisions at a center-of-mass energy of 13 TeV. The search is carried out in events containing two $\tau$ leptons in the final state, on the assumption that each $\tau$ slepton decays primarily to a $\tau$ lepton and a neutralino. Events are considered in which each $\tau$ lepton decays to one or more hadrons and a neutrino, or in which one of the $\tau$ leptons decays instead to an electron or a muon and two neutrinos. The data, collected with the CMS detector in 2016 and 2017, correspond to an integrated luminosity of 77.2 fb$^{-1}$. The observed data are consistent with the standard model background expectation. The results are used to set 95% confidence level upper limits on the cross section for $\tau$ slepton pair production in various models for $\tau$ slepton masses between 90 and 200 GeV and neutralino masses of 1, 10, and 20 GeV. In the case of purely left-handed $\tau$ slepton production and decay to a $\tau$ lepton and a neutralino with a mass of 1 GeV, the strongest limit is obtained for a $\tau$ slepton mass of 125 GeV at a factor of 1.14 larger than the theoretical cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

The Role of Subcloud Mesoscale Convergence in Sculpting Convective Updraft Width and Depth

The initiation of deep moist convection is governed in part by the horizontal width of updrafts near cloud base, which limits the deleterious effects of entrainment-driven dilution on buoyant thermals ascending through the free troposphere. However, the factors controlling cloud-base updraft width, which in turn dictates cloud depth, are not well understood. We track the evolving three-dimensional structure of the mesoscale subcloud forcing for vertical motion and near-cloud thermodynamic ingredients within a high-resolution ensemble of simulations of seven realistic daytime orographic convection initiation events to determine their relative roles in controlling cloud width and depth. Statistical analysis of approximately 5000 cloudy updraft samples indicates that the most important contributors to the width of cloudy updrafts across the ensemble are the depth and magnitude of the subcloud mesoscale ascent. However, the depth achieved by clouds is more consistently predicted by the near-cloud ambient relative humidity within the lower to middle free troposphere and convective available potential energy. Therefore, although the width of cloudy updrafts may be partly set at low levels by the mesoscale vertical mass and moisture flux, the likelihood of deep moist convection is governed by the generation of positive buoyancy within cumulus thermals and entrainment-driven dilution that reduces it. The persistence of the low-level mesoscale vertical forcing locally consolidates and vertically transports boundary layer moisture, helping to reduce updraft dilution. However, these factors vary in relative impacts on cloudy updrafts across individual cases, indicating multiple pathways for deep convection initiation.

Convective storms↗
DOE OSTI2021

Soil and Water Chemistry and Trace Metal Extractability and Speciation in Wetland Soils from Illinois and South Carolina and Stream Sediments from Tennessee

Dataset revised on October 15, 2021. This revision adds sulfur and iron X-ray absorption near-edge structure spectra for the wetland soils and stream sediments from the field areas. It also renames the sample locations in a way that is more intuitive to readers of the companion paper that is under review. Finally, the data filenames and organization have been updated in their labeling to parallel the data sources in the associated paper. The abstract text and methods were also revised to reflect the data that was added to the dataset.Trace metals are essential for microbially-mediated biogeochemical processes occurring in anoxic wetland soils and stream bed sediments, such as denitrification, methanogenesis, and mercury methylation. Low availability of these elements may potentially inhibit key components of anaerobic carbon and nitrogen cycling and contaminant transformation. The solid-phase speciation of trace metals likely plays an important role in controlling their bioavailability. Metal speciation is well studied in contaminated soils and sediments as well as those naturally elevated in trace metals. However, less is known regarding the chemical forms of trace metals in systems having concentrations similar to geological background levels, the very settings where metal limitations may be most prevalent. We have investigated trace metal concentrations, extractability, and solid-phase speciation in three freshwater subsurface aquatic systems: marsh wetland soils, riparian wetland soils, and the sediments of a streambed.Data are provided for marsh wetland soils at Argonne National Laboratory, riparian wetland soils in the Tims Branch watershed at Savannah River National Laboratory, and stream bed sediments from East Fork Poplar Creek near Oak Ridge National Laboratory. Soil and sediment elemental abundances, mineralogy, and extractable nutrients as well as dissolved major elements, anions, trace metals, and nutrients in the overlying surface waters are provided. In addition, the results of sequential chemical extraction for the trace metals cobalt, nickel, copper, and zinc from the soils and sediment are reported as well as X-ray absorption near-edge structure (XANES) spectra in these materials are reported. To aid interpretation of these data, XANES spectra of sulfur in the soils and sediments as well as both XANES and extended X-ray absorption fine structure (EXAFS) spectra of iron in these materials are reported. The data package also includes the XANES spectra of reference standards and a potential interferent in the measurements. All data are provided in text-based CSV format with header sections indicating the data contained in each file and the corresponding units. Note that "u" is used in place of Greek lower case mu to indicate the micro prefix on units.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Panorama 360 (Final Report)

This is the final technical report for the DOE-funded Panorama 360 project. Panorama 360 provided a resource for the collection, analysis, and sharing of performance data about end-to-end scientific workflows executing on DOE facilities. The work focused on workflows that include experimental data generation at DOE facilities. The main activities of Panorama 360 include the development of: 1. A distributed repository that stores different types of workflow execution data (e.g., point and time series performance traces at fine- and coarse-grained levels); 2. A set of open-source data capture, curation, and publishing tools fully integrated with a state-of-the-art workflow management system that automates data ingestion to the repository and enables users to discover, query, and process data from the repository; 3. A set of analysis algorithms and machine learning based tools to perform analysis and characterization of the gathered data, which can be used to detect anomalous performance or system faults; and 4. Best practices and recommendations for workflow evaluation, analysis, execution, and architectures.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Panorama 360 (Final Report)

This final technical report from the lead institution, USC grant #DE-SC0012636, serves as the final technical report for collaborative institution UNC-CH grant #DE-SC0012390. The goal was to develop a repository and associated capabilities for data collection, ingestion, and analysis for a broad class of DOE applications that span experimental and simulation science workflows. In particular, this work focuses on workflows that include experimental data generation at DOE facilities. The main activities of Panorama 360 include the development of: (1) A distributed repository that stores different types of workflow execution data (e.g., point and time series performance traces at fine- and coarse-grained levels); (2) A set of open-source data capture, curation, and publishing tools fully integrated with a state-of-the-art workflow management system that automates data ingestion to the repository and enables users to discover, query, and process data from the repository; (3) A set of analysis algorithms and machine learning based tools to perform analysis and characterization of the gathered data, which can be used to detect anomalous performance or system faults; and (4) Best practices and recommendations for workflow evaluation, analysis, execution, and architectures.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

VERA Enhancements for Cross Section Shielding and Geometry Capabilities

Two tasks were undertaken in FY22 that focus on VERA enhancements. The first task involved improvements to the new cross section shielding capability that was added to VERA in FY21. This cell-based capability solves the slowing down problem for each pin cell using Dancoff factors calculated from the whole-core problem. The Dancoff factors are determined for each subgroup level for important sets of materials such as fuel rods, control rods, fuel rods loaded with gad, etc. The cross-section shielding is then performed for each cell using a 1D cylindrical collision probabilities (CP) calculation to obtain the equivalence cross sections required for the core transport calculations. The advantage of this method over the whole-core subgroup calculations is efficiency, since far fewer sweeps of the entire core are required.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Partial Least Squares, Experimental Design, and Near-Infrared Spectrophotometry for the Remote Quantification of Nitric Acid Concentration and Temperature

Near-infrared spectrophotometry and partial least squares regression (PLSR) were evaluated to create a pleasantly simple yet effective approach for measuring HNO3 concentration with varying temperature levels. A training set, which covered HNO3 concentrations (0.1–8 M) and temperature (10–40 °C), was selected using a D-optimal design to minimize the number of samples required in the calibration set for PLSR analysis. The top D-optimal-selected PLSR models had root mean squared error of prediction values of 1.4% for HNO 3 and 4.0% for temperature. The PLSR models built from spectra collected on static samples were validated against flow tests including HNO 3 concentration and temperature gradients to test abnormal conditions (e.g., bubbles) and the model performance between sample points in the factor space. Based on cross-validation and prediction modeling statistics, the designed near-infrared absorption approach can provide remote, quantitative analysis of HNO 3 concentration and temperature for production-oriented applications in facilities where laser safety challenges would inhibit the implementation of other optical techniques (e.g., Raman spectroscopy) and in which space, time, and/or resources are constrained. The experimental design approach effectively minimized the number of samples in the training set and maintained or improved PLSR model performance, which makes the described chemometric approach more amenable to nuclear field applications.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Optimized self-designing key-value storage engine

Embodiments of the invention utilize an optimized key-value storage engine to strike the optimal balance between cloud-cost and performance and supports queries, including updates, lookups, range queries, inserts, and read-modify-writes. Cloud cost is manifested in purchasing both storage and processing resources. The improved approach has the ability to self-design and instantiate holistic configurations given a workload, a cloud budget, and optionally performance goals and a set of Service Level Agreement (SLA) specifications. A configuration reflects an optimized storage engine design in terms of, for example, the individual data structures design (in-memory and on-disk) in the engine as well as their algorithms and interactions, a cloud provider, and the exact virtual machines to be used.

Idreos, Stratos↗
DOE OSTI2025

KIPM Detector Characterization in QUIET

Kinetic Inductance Phonon‑Mediated (KIPM) detectors are superconducting microwave resonators that sense energy depositions in the substrate through a transient shift in their resonant frequency. In this work, I installed new devices in the QUIET cryogenic facility and used a network analyzer to drive them across a range of power levels. At each setting, I measured the transmitted signal and fit it to a simple notch‑filter model, allowing us to extract key performance metrics. Despite the increased noise at low power, the model consistently captured the resonance behavior. I first measured the resonance parameters as a function of RF drive power, then repeated the measurement across a range of temperatures to test whether the device behaved like an MKID. While the notch-filter fits captured the resonance reliably, the observed temperature dependence did not match the expected MKID signature — indicating that these first in-house fabricated chips are not yet functioning as true MKIDs. Overall, this reframes our work as a study of resonance parameter extraction and identification, pointing towards future iterations of device design and fabrication to get the true MKID response.

Savitala, Akash [U. Washington, Seattle (main); Fe↗
DOE OSTI2025

Glass Property-Composition Models Update for use in Direct Feed High-Level Waste Flowsheet Development

A set of preliminary glass property models and constraints were developed and augmented by models from literature for use in design of direct-feed high-level waste (DFHLW) glasses for flowsheet evaluation, testing, and design of the Tank Waste Treatment and Immobilization Plant (WTP) high-level waste (HLW) Facility. These models and constraints are meant to be used as a place-holder while glass property-composition data gaps are filled and final plant operating models are developed. This report describes the motivation and intended use of the models, the compilation of data, model fitting and selection, methods to apply the models and constraints in glass design and offers example calculations demonstrating their intended use.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

BI-LEVEL OPTIMIZATION FOR ELECTRICITY TRANSACTION IN SMART COMMUNITY WITH MODULAR PUMP HYDRO STORAGE

Grid integration of the increasing distributed energy resources could be challenging in terms of new infrastructure investment, power grid stability, etc. To resolve more renewables locally and reduce the need for extensive electricity transmission, a community energy transaction market is assumed with market operator as the leader whose responsibility is to generate local energy prices and clear the energy transaction payment among the prosumers (followers). The leader and multi-followers have competitive objectives of revenue maximization and operational cost minimization. This non-cooperative leader-follower (Stackelberg) game is formulated using a bi-level optimization framework, where a novel modular pump hydro storage technology (GLIDES system) is set as an upper level market operator, and the lower level prosumers are nearby commercial buildings. The best responses of the lower level model could be derived by necessary optimality conditions, and thus the bi-level model could be transformed into single level optimization model via replacing the lower level model by its Karush-Kuhn-Tucker (KKT) necessary conditions. Several experiments have been designed to compare the local energy transaction behavior and profit distribution with the different demand response levels and different local price structures. The experimental results indicate that the lower level prosumers could benefit the most when local buying and selling prices are equal, while maximum revenue potential for the upper level agent could be reached with non-equal trading prices.

Chen, Yang↗
DOE OSTI2021

Universal Utility Data Exchange (UUDEX) Functional Design Requirements - Rev 1

This document provides a set of high-level functional design requirements for Universal Utility Data Exchange (UUDEX). These requirements include a set of use cases, data exchanges supported by UUDEX, both for grid operations and for cyber security data, functional requirements for data exchange, data models used by UUDEX, data exchange architectures, and security considerations. These functional design requirements are intended to be used in more detailed design documents.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

North Slope of Alaska XSAPR b1 Data Processing Report: May 2025-April 2026

The U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) User Facility operates an X-band Scanning ARM Precipitation Radar (XSAPR) at the North Slope of Alaska (NSA) atmospheric observatory in Utqiaġvik. This radar provides year-round dual-polarization measurements of snow and ice in an arctic environment. Over the past few years, there has been greater focus on the NSA XSAPR, and recent efforts by ARM staff have resulted in quality-controlled, b-level data (Rocque et al. 2026b). This report outlines the processing of the second set of b-level data released for this radar from May 2025 through April 2026 following similar methods from Rocque et al. (2026b).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Diesel Generator Model Parameterization for Microgrid Simulation Using Hybrid Box-Constrained Levenberg-Marquardt Algorithm

Existing generator parameterization methods, typically developed for large turbine generator units, are difficult to apply to small kW-level diesel generators in microgrid applications. Here, this article presents a model parameterization method that estimates a complete set of kW-level diesel generator parameters simultaneously using only load-step-change tests with limited measurement points. This method provides a more cost-efficient and robust approach to achieve high-fidelity modeling of diesel generators for microgrid dynamic simulation. A two-stage hybrid box-constrained Levenberg-Marquardt (H-BCLM) algorithm is developed to search the optimal parameter set given the parameter bounds. A heuristic algorithm, namely Generalized Opposition-based Learning Genetic Algorithm (GOL-GA), is applied to identify proper initial estimates at the first stage, followed by a modified Levenberg-Marquardt algorithm designed to fine tune the solution based on the first-stage result. The proposed method is validated against dynamic simulation of a diesel generator model and field measurements from a 16kW diesel generator unit.

42 ENGINEERING↗
DOE OSTI2021

Optimal dimensionality selection for independent component analysis of transcriptomic data

Independent component analysis is an unsupervised machine learning algorithm that separates a set of mixed signals into a set of statistically independent source signals. Applied to high-quality gene expression datasets, independent component analysis effectively reveals both the source signals of the transcriptome as co-regulated gene sets, and the activity levels of the underlying regulators across diverse experimental conditions. Two major variables that affect the final gene sets are the diversity of the expression profiles contained in the underlying data, and the user-defined number of independent components, or dimensionality, to compute. Availability of high-quality transcriptomic datasets has grown exponentially as high-throughput technologies have advanced; however, optimal dimensionality selection remains an open question. We computed independent components across a range of dimensionalities for four gene expression datasets with varying dimensions (both in terms of number of genes and number of samples). We computed the correlation between independent components across different dimensionalities to understand how the overall structure evolves as the number of user-defined components increases. We then measured how well the resulting gene clusters reflected known regulatory mechanisms, and developed a set of metrics to assess the accuracy of the decomposition at a given dimension. We found that over-decomposition results in many independent components dominated by a single gene, whereas under-decomposition results in independent components that poorly capture the known regulatory structure. From these results, we developed a new method, called OptICA, for finding the optimal dimensionality that controls for both over- and under-decomposition. Specifically, OptICA selects the highest dimension that produces a low number of components that are dominated by a single gene. We show that OptICA outperforms two previously proposed methods for selecting the number of independent components across four transcriptomic databases of varying sizes. OptICA avoids both over-decomposition and under-decomposition of transcriptomic datasets resulting in the best representation of the organism’s underlying transcriptional regulatory network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗