Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Inclined Jet in Crossflow Interacting with a Vortex Generator

An experiment is conducted on the effectiveness of a vortex generator in preventing liftoff of a jet in crossflow, with possible relevance to film-cooling applications. The jet issues into the boundary layer at an angle of 20 degreees to the freestream. The effect of a triangular ramp-shaped vortex generator is studied while varying its geometry and location. Detailed flowfield properties are obtained for a case in which the height of the vortex generator and the diameter of the orifice are comparable with the approach boundary-layer thickness. The vortex generator produces a streamwise vortex pair with a vorticity magnitude 3 times larger (and of opposite sense) than that found in the jet in crossflow alone. Such a vortex generator appears to be most effective in keeping the jet attached to the wall. The effect of parametric variation is studied mostly from surveys 10 diameters downstream from the orifice. Results over a range of jet-to-freestream momentum flux ratio (1 < J < 11) show that the vortex generator has a significant effect even at the highest J covered in the experiment. When the vortex generator height is halved, there is a liftoff of the jet. On the other hand, when the height is doubled, the jet core is dissipated due to larger turbulence intensity. Varying the location of the vortex generator, over a distance of three diameters from the orifice, is found to have little impact. Rounding off the edges of the vortex generator with the increasing radius of curvature progressively diminishes its effect. However, allowing for a small radius of curvature may be quite tolerable in practice.

Zaman, K. B. M. Q.↗
DOE OSTI2024

High-speed X-ray imaging of droplet-powder interaction in binder jet additive manufacturing

Binder jetting (BJ) is an additive manufacturing process that uses a powder feedstock in a layer wise process to print parts by selectively depositing a liquid binder into the powder bed using inkjet technology. This study presents findings from high-speed synchrotron imaging of binder droplet-interaction during the BJ printing process. A custom laboratory-scale BJ test platform was used for testing which enabled control of relevant process parameters including powder material, print geometry, spacing between droplets, powder bed density, and powder moisture content. Powder ejection was observed above the powder bed surface and powder relocation due to droplet impact was observed below the powder bed surface. Powder relocation was observed to be sensitive to powder material, powder bed density, powder bed moisture, droplet spacing, and print geometry. Increasing powder bed density was found to increase particle ejection velocity but reduce the total number of particles ejected. Process parameters that increase binder / moisture content in the powder bed were found to reduce powder ejection. The number of ejected powder particles was reduced for lower droplet spacings. Both powder ejection and powder relocation below the powder bed were reduced by treating the surface of the powder bed with a water/triethylene glycol (TEG) mixture before printing. In conclusion, results from this study help to build understanding of the physical mechanisms in the BJ printing process that may contribute to formation of defects observed in final parts.

36 MATERIALS SCIENCE↗
NASA NTRS1980

VTOL in-ground effect flows for closely spaced jets

The interaction of two vertically impinging incompressible jets is studied through the invention of physical flow models that approximate the behavior of colliding wall jets as the incident jets are brought closer together. The mechanism for upwash formation is studied and momentum models for the upwash sheet are postulated. An approximate method for computing the ground isobar pattern of jet and upwash deflection zones is presented and compared with test data. A method for computing the upwash impingement force in the absence of secondary induced flow effects is also presented and reasonably good agreement is achieved with experimental data for cylindrical fuselage shapes of circular and rectangular cross section.

Siclari, M. J.↗
NASA NTRS1993

DSMC simulation of the interaction between rarefied free jets

This paper presents a direct simulation Monte Carlo (DSMC) calculation of two interacting free jets exhausting into vacuum. The computed flow field is compared against available experimental data and shows excellent agreement everywhere except in the very near field (less than one orifice diameter downstream of the jet exhaust plane). The lack of agreement in this region is attributed to having assumed an inviscid boundary condition for the orifice lip. The results serve both to validate the DSMC code for a very complex, three dimensional non-equilibrium flow field, and to provide some insight as to the complicated nature of this flow.

Dagum, Leonardo↗
NASA NTRS1986

A computational study of multiple jet and wall interaction

In the fuel preburner of the Space Shuttle Main Engine, face plate, injector, and baffle erosion have been observed. The observed patterns of erosion suggest that flame attachment to the walls is a contributing factor. To better understand the physical phenomena involved, a portion of the preburner was modeled computationally. The simulated 'preburner' had three two-dimensional jets entering a cavity adjacent to a baffle. The computational model employed the Patankar Spalding algorithm with upwind differencing. The turbulence model was a standard k-epsilon model with wall functions. The effects of incoming boundary conditions on turbulent kinetic energy and dissipation, k and epsilon, was studied. The results indicate a very strong sensitivity to these boundary conditions over certain ranges of values.

Campbell, W.↗
NASA NTRS2016

Wind Tunnel Model Design for Sonic Boom Studies of Nozzle Jet with Shock Interactions

NASA and Industry are performing vehicle studies of configurations with low sonic boom pressure signatures. The computational analyses of modern configuration designs have matured to the point where there is confidence in the prediction of the pressure signature from the front of the vehicle, but uncertainty in the aft signatures with often greater boundary layer effects and nozzle jet pressures. Wind tunnel testing at significantly lower Reynolds numbers than in flight and without inlet and nozzle jet pressures make it difficult to accurately assess the computational solutions of flight vehicles. A wind tunnel test in the NASA Ames 9- by 7-Foot Supersonic Wind Tunnel from Mach 1.6 to 2.0 will be used to assess the effects of shocks from components passing through nozzle jet plumes on the sonic boom pressure signature and provide datasets for comparison with CFD codes. A large number of high-fidelity numerical simulations of wind tunnel test models with a variety of shock generators that simulate horizontal tails and aft decks have been studied to provide suitable models for sonic boom pressure measurements using a minimally intrusive pressure rail in the wind tunnel. The computational results are presented and the evolution of candidate wind tunnel models is summarized and discussed in this paper.

Wind↗
NASA NTRS1989

Nonlinear interactions in mixing layers and compressible heated round jets

The nonlinear interactions between a fundamental instability mode and both its harmonics and the changing mean flow are studied using the weakly nonlinear stability theory of Stuart and Watson, and numerical solutions of coupled nonlinear partial differential equations. The first part focuses on incompressible cold (or isothermal; constant temperature throughout) mixing layers, and for these, the first and second Landau constants are calculated as functions of wavenumber and Reynolds number. It is found that the dominant contribution to the Landau constants arises from the mean flow changes and not from the higher harmonics. In order to establish the range of validity of the weakly nonlinear theory, the weakly nonlinear and numerical solutions are compared and the limitation of each is discussed. At small amplitudes and at low-to-moderate Reynolds numbers, the two results compare well in describing the saturation of the fundamental, the distortion of the mean flow, and the initial stages of vorticity roll-up. At larger amplitudes, the interaction between the fundamental, second harmonic, and the mean flow is strongly nonlinear and the numerical solution predicts flow oscillations, whereas the weakly nonlinear theory yields saturation. In the second part, the weakly nonlinear theory is extended to heated (or nonisothermal; mean temperature distribution) subsonic round jets where quadratic and cubic nonlinear interactions are present, and the Landau constants also depend on jet temperature ratio, Mach number and azimuthal mode number. Under exponential growth and nonlinear saturation, it is found that heating and compressibility suppress the growth of instability waves, that the first azimuthal mode is the dominant instability mode, and that the weakly nonlinear solution describes the early stages of the roll-up of an axisymmetric shear layer. The receptivity of a typical jet flow to pulse type input disturbance is also studied by solving the initial value problem and then examining the behavior of the long-time solution.

Jarrah, Yousef Mohd↗
NASA NTRS2014

Resonant Interaction of a Rectangular Jet with a Flat-Plate

A resonant interaction between a large aspect ratio rectangular jet and a flat-plate is addressed in this experimental study. The plate is placed parallel to but away from the direct path of the jet. At high subsonic conditions and for certain relative locations of the plate, the resonance accompanied by an audible tone is encountered. The trends of the tone frequency variation exhibit some similarities to, but also marked differences from, corresponding trends of the well-known edge-tone phenomenon. Under the resonant condition flow visualization indicates a periodic flapping motion of the jet column. Phase-averaged Mach number data obtained near the plate's trailing edge illustrate that the jet cross-section goes through large contortions within the period of the tone. Farther downstream a clear 'axis switching' takes place. These results suggest that the assumption of two-dimensionality should be viewed with caution in any analysis of the flow.

Zaman, K. B. M. Q.↗
DOE OSTI2025

Experimental platforms for investigating feature-driven jets for HED mix model validation

High-energy-density (HED) systems, such as inertial confinement fusion (ICF), are susceptible to hydrodynamic instabilities that can significantly affect both experimental results and modeling predictions. Isolated features, such as fill tubes or divots in the capsule, can cause material to jet as a result of the compressive shock exciting the Richtmyer–Meshkov instability, and serve as one of the primary degradation mechanisms in ICF yield. Simulations of feature-driven jets and how they mix require extensive experimental validation, particularly for understanding to what degree the initial size and shape of a feature influence jet dynamics, and how much instability feeds through downstream layers. A better understanding of feature-driven jetting can improve our mix modeling capabilities and increase hydrodynamic simulation accuracy. This manuscript describes a series of experimental platforms fielded by Los Alamos National Laboratory as a part of the Mshock Omega 60 and ModCons Omega EP campaigns to explore feature-driven jetting. These platforms are designed to benchmark jet evolution and growth as a function of initial feature size and shape, investigate jet-layer interactions leading to instability feedthrough, and will be used to characterize jet-jet interactions resulting from clusters of features. In conclusion, preliminary results for both platforms are shown. The ModCons experiments are on-going, and a discussion of future work directions is included.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Measurements of jet quenching using semi-inclusive hadron+jet distributions in 𝑝⁢𝑝 and central Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The ALICE Collaboration reports measurements of the semi-inclusive distribution of charged-particle jets recoiling from a high transverse momentum (high pT) charged hadron, in pp and central Pb-Pb collisions at center-of-mass energy per nucleon–nucleon collision $\sqrt{s_{NN}}$ = 5.02 TeV. The large uncorrelated background in central Pb-Pb collisions is corrected using a data-driven statistical approach which enables precise measurement of recoil jet distributions over a broad range in p T,ch jet and jet resolution parameter R. Recoil jet yields are reported for R = 0.2, 0.4, and 0.5 in the range 7 < p T,ch jet < 140 GeV/c and π/2 < φ < π, where φ is the azimuthal angular separation between hadron trigger and recoil jet. The low-p T,ch jet reach of the measurement explores unique phase space for studying jet quenching, the interaction of jets with the quark–gluon plasma generated in high-energy nuclear collisions. Comparison of p T,ch jet distributions from pp and central Pb-Pb collisions probes medium-induced jet energy loss and intra-jet broadening, while comparison of their acopla narity distributions explores in-medium jet scattering and medium response. The measurements are compared to theoretical calculations incorporating jet quenching.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1974

Calculations of the pressure distribution on axisymmetric boattails including effects of viscous interactions and exhaust jets in subsonic flow

A method of calculating the pressure distributions on boattails is proposed. This method accounts for viscous effects including the presence of a separated region for base flows by combining an inviscid analysis with a boundary layer analysis in an iterative calculation. Details of the reversed flow region are not considered. Some preliminary results have been obtained for boattails at subsonic free stream Mach number with turbulent boundary layers separating at the boattail base. In some cases convergence could not be obtained using the present computer program. It is possible, in principle, to extend this method to the calculation of boattail flows with pressure gradient induced separation on the boattail.

Rom, J.↗