Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Effect of Ground Proximity on Aerodynamic Characteristics of Two Horizontal-Attitude Jet Vertical-Take-Off-and-Landing Airplane Models

An investigation has been made to study the effect of ground proximity on the aerodynamic characteristics of two jet vertical-take-off-and-landing airplane models in which the fuselage remains in a horizontal attitude for the take-off and landing. The first model (called the tilt-wing model) had a tilting wing-engine assembly which was set at 90 degree incidence for the take-off and landing. The second model (called the deflected-jet model) had a cascade of retractable turning vanes to deflect the exhaust of the horizontally mounted Jet engines downward for vertical take-off and landing while the entire model remained in a horizontal attitude. With the models at various heights above the ground in the take-off and landing configuration, the llft, drag, and pitching moment were measured and tuft surveys were made to determine the flow field caused by the Jet exhaust. The tilt-wing model experienced a loss of lift of less than 3 percent near the ground. The deflected-Jet model, however, suffered losses in lift as high as 45 percent near the ground because of a low pressure region under the model caused by the entrainment of air by the jet exhaust as it spread out along the ground. This loss in lift for the deflected Jet configuration could probably be reduced to less than 5 percent by the use of a longer landing gear and a high wing location.

Newsom, William A , Jr↗

Effect of Ground Proximity on Aerodynamic Characteristics of Two Horizontal-Attitude Jet Vertical-Take-Off-and-Landing Airplane Models

An investigation has been made to study the effect of ground proximity on the aerodynamic characteristics of two jet vertical-take-off-and-landing airplane models in which the fuselage remains in a horizontal attitude for the take-off and landing. The first model (called the tilt-wing model) had a tilting wing-engine assembly which was set at 90 deg incidence for the take-off and landing. The second model, called the deflected-jet model) had a cascade of retractable turning vanes to deflect the exhaust of the horizontally mounted jet engines downward for vertical take-off and landing while the entire model remained in a horizontal attitude. With the models at various heights above the ground in the take-off and landing configuration, the lift, drag, and pitching moment were measured and tuft surveys were made to determine the flow field caused by the jet exhaust. The tilt-wing model experienced a loss of lift of less than 3 percent near the ground. The deflected-jet model, however, suffered losses in lift as high as 45 percent near the ground because of a low pressure region under the model caused by the entrainment of air by the jet exhaust as it spread out along the ground. This loss in lift for the deflected-jet configuration could probably be reduced to less than 5 percent by the use of a longer landing gear and a high wing location.

Newsom, William A., Jr.↗

The Mechanisms of Natural Variability and its Interaction with Anthropogenic Climate Change Final Report

The project had two main components. The first concerns estimating the climate sensitivity in the presence of forcing uncertainty and natural variability. Climate sensitivity is the increase in the average surface temperature for a given increase in greenhouse gases, for example a doubling of carbon dioxide. We have provided new, probabilistic estimates of climate sensitivity using a simple climate model an the observed warming in the 20th century, in conjunction with ideas in data assimilation and parameter estimation developed in the engineering community. The estimates combine the uncertainty in the anthropogenic aerosols with the uncertainty arising because of natural variability. The second component concerns how the atmospheric circulation itself might change with anthropogenic global warming. We have shown that GCMs robustly predict an increase in the length scale of eddies, and we have also explored the dynamical mechanisms whereby there might be a shift in the latitude of the jet stream associated with anthropogenic warming. Such shifts in the jet might cause large changes in regional climate, potentially larger than the globally-averaged signal itself. We have also shown that the tropopause robustly increases in height with global warming, and that the Hadley Cell expands, and that the expansion of the Hadley Cell is correlated with the polewards movement of the mid-latitude jet.

58 GEOSCIENCES↗

Remote sounding through semi-transparent cirrus cloud

A large portion of the earth is covered by thin semi-transparent cirrus cloud. The cirrus results from the natural injection of moisture into the upper troposphere by deep convection (i.e., anvils) and from man-made moisture injected into the upper troposphere by jet aircraft. Although most cirrus clouds are semi-transparent to infrared wavelengths, their heights, thicknesses, and spectral absorption properties must be known in order to retrieve atmospheric temperature and moisture profiles from the data. An algorithm is developed for accounting for the radiative properties of semi-transparent cloud in the retrieval of vertical temperature and moisture profiles. The algorithm is to be applied to the NASA ER2 HIS data collected during the FIRE cirrus field program.

Smith, William L.↗

Exploring EUV Spicules Using 304 Ang He II Data from SDO/AIA

We present results from a statistical study of He II 304 Angstrom EUV spicules and macrospicules at the limb of the Sun. We use high-cadence (12 sec) and high-resolution (0.6 arcsec pixels) resolution data from the Atmospheric Imaging Array (AIA) instrument on the Solar Dynamic Observatory (SDO). All of the observed events occurred in quiet or coronal hole regions near the solar pole. Spicules and macrospicules are typically transient jet-like chromospheric-material features, the macrospicules are wider and have taller maximum heights than the spicules. We looked for characteristics of the populations of these two phenomena that might indicate whether they have the same or different initiation mechanisms. We examined the maximum heights, time-averaged rise velocities, and lifetimes of about two dozen EUV spicules and about five EUV macrospicules. For spicules, these quantities are, respectively, approx. 5-30 km, 5-50 km/s, and a few 100- approx. 1000 sec. Macrospicules were approx. 60,000 km, 55 km/s, and had lifetimes of approx. 1800 sec. Therefore the macrospicules were taller and longer-lived than the spicules, and had velocities comparable to that of the fastest spicules. The rise profiles of both the spicules and the macrospicules matched well a second-order ("parabolic'') trajectory, although the acceleration was generally weaker than that of solar gravity in the profiles fitted to the trajectories. The Macrospicules also had obvious brightenings at their bases at their birth, while such brightenings were not apparent for most of the spicules. Most of the spicules and several of the macrospicules remained visible during their decent back to the solar surface, although a small percentage of the spicules faded out before their fall was completed. Are findings are suggestive of the two phenomena possibly having different initiation mechanisms, but this is not yet conclusive. Qualitatively the EUV 304 Angstrom spicules match well the properties quoted for "Type I'' Hinode Ca II spicules, even though we observed these 304 Angstrom spicules at a polar location, where typically only "Type II'' spicules are seen in the Hinode Ca II images. A.C.S. and R.L.M. were supported by funding from the Heliophysics Division of NASA's Science Mission Directorate through the Living With a Star Targeted Research and Technology Program, and the Hinode Project. I.S. was supported by NSF's Research Experience for Undergraduates Program

Snyder, Ian↗

Impacts of ENSO on the South American Summer Monsoon During 1997-1999

Using the National Center for Environmental Prediction (NCEP) Reanalysis, and CPC Merged Analysis Product (CMAP) rainfall, we have compared and contrasted the anomalies of the South American Summer Monsoon (SASM) during two extreme years of 1997/98 (EI Nino) and 1998/99 (La Nina). The results are assessed against a "canonical" ENSO response (CER) pattern for the SASM obtained from empirical mode decomposition based on a previous period (1980-1995). Overall, the SASM anomalies compare well with CER, but with some important differences. Anomalies occurring in the warm phase of the 1997-98 El Nino are very significant and robust, while those occurring in 1998/99 La Nina, appear to be reversed from 1997/98, but are relatively weak and less well-defined. The most pronounced signal in DJF 1997/98 is the development of drought conditions in northern Brazil, excessive rainfall over northern Peru and Ecuador, and over Uruguay and southern Brazil. The tropical rainfall anomalies are associated with the eastward shift of the Walker circulation, which is represented by pronounced low-level anomalous westerlies over the equatorial eastern Pacific and easterlies over northern Brazil. The easterlies are deflected sharply southeastward by the steep topography of the Andes, enhancing the low-level jet (LLJ) along the eastern foothills of the Andes near 15-20 S. The LLJ penetrates deep into the extratropics, yielding rainfall anomalies further poleward compared to CER. During DJF 1997/98, the eastward expansion of the warm tropospheric temperature over the Nino-3 region causes anomalous geopotential height to develop in the upper troposphere above the Altiplano, leading to a strengthened Bolivian High. An upper-tropospheric jet anomaly maximum is found over the subtropical continent near 30 S, due to increasing meridional gradient of tropospheric temperature, as well as teleconnection patterns linking the South Pacific and the South Atlantic. Consistent with the CER, the South Pacific High is weakened, and the South Atlantic High is strengthened in DJF 1997/98. However, rather than appearing as a coherent large scale signal over the entire Atlantic as in CER, the South Atlantic High anomalies in DJF 1997/98 split into two separate high pressure centers; one located south of the Amazon basin, and another over the southeastern South Atlantic. The former is induced as a Rossby-wave response by ENSO-Induced sinking motion over nor-them and eastern Brazil, and the latter may be associated with extratropical teleconnection signals. Anomalous convection observed over equatorial western Africa may also have contributed to the different circulation response over the Atlantic in DFJ 1997/99 compared to the CER. Comparison of the evolution of the SASM anomalies in 1997-99 with their corresponding annual cycles, suggest that the anomalies are phase-locked to and represent either enhancement or reduction of the annual variations. Results suggest that, from a system perspective the SASM was strengthened during the 1997/98 El Nino and weakened, albeit to a lesser extent, during the 1998/99 La Nina.

Lau, K.-M.↗

Geometric factors affecting noise suppresion and thrust loss of divergent-lobe supersonic jet noise suppressor

The thrust loss and noise suppression of a divergent-lobe supersonic jet noise suppressor were experimentally determined over a range of nozzle pressure ratios of 1.5 to 4.0. These small-scale cold flow tests were made to determine the effect on thrust and noise of: suppressor length, rearward facing step height, suppressor divergence angle, and ejector shroud length and location. Noise suppression was achieved at nozzle pressure ratios of 2.5 and greater. Maximum lobe jet noise attenuation of 15 db with thrust loss differences of 1.5 percent compared to the convergent nozzle were obtained at a nozzle pressure ratio of 3.5 with an ejector shroud two nozzle diameters long. Without the ejector the attenuation was 13 db with thrust loss differences of 11 percent. Short suppressors approximately one primary nozzle throat diameter long performed as well as longer suppressors. Rearward facing step height had a significant effect on noise suppression. Ejector shrouds two nozzle diameters in length are feasible.

Huff, R. G.↗

The nature of airbursts and their contribution to the impact threat.

Ongoing simulations of low-altitude airbursts from hypervelocity asteroid impacts have led to a re-evaluation of the impact hazard that accounts for the enhanced damage potential relative to the standard point-source approximations. Computational models demonstrate that the altitude of maximum energy deposition is not a good estimate of the equivalent height of a point explosion, because the center of mass of an exploding projectile maintains a significant fraction of its initial momentum and is transported downward in the form of a high-temperature jet of expanding gas. This 'fireball' descends to a depth well beneath the burst altitude before its velocity becomes subsonic. The time scale of this descent is similar to the time scale of the explosion itself, so the jet simultaneously couples both its translational and its radial kinetic energy to the atmosphere. Because of this downward flow, larger blast waves and stronger thermal radiation pulses are experienced at the surface than would be predicted for a nuclear explosion of the same yield at the same burst height. For impacts with a kinetic energy below some threshold value, the hot jet of vaporized projectile loses its momentum before it can make contact with the Earth's surface. The 1908 Tunguska explosion is the largest observed example of this first type of airburst. For impacts above the threshold, the fireball descends all the way to the ground, where it expands radially, driving supersonic winds and radiating thermal energy at temperatures that can melt silicate surface materials. The Libyan Desert Glass event, 29 million years ago, may be an example of this second, larger, and more destructive type of airburst. The kinetic energy threshold that demarcates these two airburst types depends on asteroid velocity, density, strength, and impact angle. Airburst models, combined with a reexamination of the surface conditions at Tunguska in 1908, have revealed that several assumptions from the earlier analyses led to erroneous conclusions, resulting in an overestimate of the size of the Tunguska event. Because there is no evidence that the Tunguska fireball descended to the surface, the yield must have been about 5 megatons or lower. Better understanding of airbursts, combined with the diminishing number of undiscovered large asteroids, leads to the conclusion that airbursts represent a large and growing fraction of the total impact threat.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

BIPOLAR JETS LAUNCHED FROM MAGNETICALLY DIFFUSIVE ACCRETION DISKS. I. EJECTION EFFICIENCY VERSUS FIELD STRENGTH AND DIFFUSIVITY

We investigate the launching of jets and outflows from magnetically diffusive accretion disks. Using the PLUTO code, we solve the time-dependent resistive magnetohydrodynamic equations taking into account the disk and jet evolution simultaneously. The main question we address is which kind of disks launch jets and which kind of disks do not? In particular, we study how the magnitude and distribution of the (turbulent) magnetic diffusivity affect mass loading and jet acceleration. We apply a turbulent magnetic diffusivity based on {alpha}-prescription, but also investigate examples where the scale height of diffusivity is larger than that of the disk gas pressure. We further investigate how the ejection efficiency is governed by the magnetic field strength. Our simulations last for up to 5000 dynamical timescales corresponding to 900 orbital periods of the inner disk. As a general result, we observe a continuous and robust outflow launched from the inner part of the disk, expanding into a collimated jet of superfast-magnetosonic speed. For long timescales, the disk's internal dynamics change, as due to outflow ejection and disk accretion the disk mass decreases. For magnetocentrifugally driven jets, we find that for (1) less diffusive disks, (2) a stronger magnetic field, (3) a low poloidal diffusivity, or (4) a lower numerical diffusivity (resolution), the mass loading of the outflow is increased-resulting in more powerful jets with high-mass flux. For weak magnetization, the (weak) outflow is driven by the magnetic pressure gradient. We consider in detail the advection and diffusion of magnetic flux within the disk and we find that the disk and outflow magnetization may substantially change in time. This may have severe impact on the launching and formation process-an initially highly magnetized disk may evolve into a disk of weak magnetization which cannot drive strong outflows. We further investigate the jet asymptotic velocity and the jet rotational velocity in respect of the different launching scenarios. We find a lower degree of jet collimation than previous studies, most probably due to our revised outflow boundary condition.

79 ASTRONOMY AND ASTROPHYSICS↗

Smoke Point in Co-flow Experiment

The Smoke Point In Co-flow Experiment (SPICE) determines the point at which gas-jet flames (similar to a butane-lighter flame) begin to emit soot (dark carbonaceous particulate formed inside the flame) in microgravity. Studying a soot emitting flame is important in understanding the ability of fires to spread and in control of soot in practical combustion systems space. Previous experiments show that soot dominates the heat emitted from flames in normal gravity and microgravity fires. Control of this heat emission is critical for prevention of the spread of fires on Earth and in space for the design of efficient combustion systems (jet engines and power generation boilers). The onset of soot emission from small gas jet flames (similar to a butane-lighter flame) will be studied to provide a database that can be used to assess the interaction between fuel chemistry and flow conditions on soot formation. These results will be used to support combustion theories and to assess fire behavior in microgravity. The Smoke Point In Co-flow Experiment (SPICE) will lead to a o improved design of practical combustors through improved control of soot formation; o improved understanding of and ability to predict heat release, soot production and emission in microgravity fires; o improved flammability criteria for selection of materials for use in the next generation of spacecraft. The Smoke Point In Co-flow Experiment (SPICE) will continue the study of fundamental phenomena related to understanding the mechanisms controlling the stability and extinction of jet diffusion flames begun with the Laminar Soot Processes (LSP) on STS-94. SPICE will stabilize an enclosed laminar flame in a co-flowing oxidizer, measure the overall flame shape to validate the theoretical and numerical predictions, measure the flame stabilization heights, and measure the temperature field to verify flame structure predictions. SPICE will determine the laminar smoke point properties of non-buoyant jet diffusion flames (i.e., the properties of the largest laminar jet diffusion flames that do not emit soot) for several fuels under different nozzle diameter/co-flow velocity configurations. Luminous flame shape measurements would also be made to verify models of the flame shapes under co-flow conditions. The smoke point is a simple measurement that has been found useful to study the influence of flow and fuel properties on the sooting propensity of flames. This information would help support current understanding of soot processes in laminar flames and by analogy in turbulent flames of practical interest.

Urban, David L.↗

Monthly Maps of Sea Surface Height in the North Atlantic and Zonal Indices for the Gulf Stream Using TOPEX/Poseidon Altimeter Data

Monthly Maps of sea surface height are constructed for the North Atlantic Ocean using TOPEX/Poseidon altimeter data. Mean sea surface height is reconstructed using a weighted combination of historical, hydrographic data and a synthetic mean obtained by fitting a Gaussian model of the Gulf Stream jet to altimeter data. The resultant mean shows increased resolution over the hydrographic mean, and incorporates recirculation information that is absent in the synthetic mean. Monthly maps, obtained by adding the mean field to altimeter sea surface height residuals, are used to derive a set of zonal indices that describe the annual cycle of meandering as well as position and strength of the Gulf Stream.

GULF STREAM↗

HINODE OBSERVATION OF THE MAGNETIC FIELDS IN A SUNSPOT LIGHT BRIDGE ACCOMPANIED BY LONG-LASTING CHROMOSPHERIC PLASMA EJECTIONS

We present high-resolution magnetic field measurements of a sunspot light bridge (LB) that produced chromospheric plasma ejections intermittently and recurrently for more than 1 day. The observations were carried out with the Hinode Solar Optical Telescope on 2007 April 29 and 30. The spectro-polarimeter reveals obliquely oriented magnetic fields with vertical electric current density higher than 100 mA m{sup -2} along the LB. The observations suggest that current-carrying highly twisted magnetic flux tubes are trapped below a cusp-shaped magnetic structure along the LB. The presence of trapped current-carrying flux tubes is essential for causing long-lasting chromospheric plasma ejections at the interface with pre-existing vertically oriented umbral fields. A bidirectional jet was clearly detected, suggesting magnetic reconnections occurring at very low altitudes, slightly above the height where the vector magnetic fields are measured. Moreover, we found another strong vertical electric current on the interface between the current-carrying flux tube and pre-existing umbral field, which might be a direct detection of the currents flowing in the current sheet formed at the magnetic reconnection sites.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of wall suction on performance of a short annular diffuser at inlet Mach numbers up to 0.5

A short annular diffuser equipped with wall bleed (suction)capability was evaluated at inlet Mach numbers of 0.186 to 0.5. The diffuser had an area ratio of 4.0 and a length-to-inlet height ratio of 1.6. Test results show that the exit velocity profiles, typical of annular jet flow without suction, could be considerably flattened by application of wall suction. This improved performance was also reflected in diffuser effectiveness (static-pressure recovery) and total-pressure loss results. At the inlet Mach number of 0.5 diffuser static-pressure recovery is equal to or better than at lower inlet Mach numbers for comparable suction rates.

Juhasz, A. J.↗

Experimental studies of shock wave/wall jet interaction in hypersonic flow

The interaction between a planar shock wave and a wall jet produced by slot cooling in turbulent hypersonic flow was experimentally studied. Detailed distributions of heat transfer and pressure are obtained in the incident shock/wall jet interaction region for a series of shock strengths and impingement positions for two nozzle heights. The major result is that the cooling film could be readily dispersed by relatively weak incident shocks such that the peak heating in the recompression region was not significantly reduced by even the largest levels of film cooling. Regions of boundary layer separation were induced in the film cooling layer, the size of which first increased and then decreased with increasing film cooling. The size of the separated regions and magnitude of the recompression heating were not strongly influenced by the thickness of the cooling film or point of shock impingement relative to the exit plane of the nozzles.

Holden, Michael S.↗

Assessment of Land Surface Model Performance in WRF for Simulating Wind at Heights Relevant to the Wind Energy Community

The Weather Research and Forecasting (WRF) model was used to investigate the impact of land surface model (LSM) physics on the simulated surface energy balance and the near surface wind profile, including heights reached by a modern wind turbine. Simulations were made for a domain centered over the Department of Energy (DOE) Southern Great Plains (SGP) Atmospheric Radiation Measurement Program (ARM) Central Facility in northern Oklahoma. High-resolution measurements of surface fluxes and profiles of wind speed, direction and turbulence were available for model validation. We tested 10 common LSM configurations in WRF including Noah, Noah-MP, SSiB, Pleim-Xiu, RUC, and others to evaluate (1) the accuracy of simulated surface energy fluxes, (2) the accuracy of forecasted rotor-disk height wind speeds, and (3) the sensitivity of rotor disk wind speed to the choice of LSM. WRF was run for four, two-week periods covering different canopy, surface meteorology and soil moisture conditions. LSM performances varied by simulation period and errors were greatest during periods with high soil moisture and live crop cover, indicating highest LSM sensitivity when PBL behavior is most coupled to land-atmosphere exchange. Higher wind speed errors also occurred at night during the spring, possibly from the difficulty with simulating nocturnal low-level jets. We found that choice of land surface model led to a ~10% improvement in simulating hub-height wind speed. Errors in wind shear were also sensitive to the choice of LSM. Overall the best performing models were Noah and Noah-MP. The variability of LSM performance across different soil moisture and vegetation canopy conditions suggests LSM representation of surface energy exchange processes in WRF remains a large source of model uncertainty. Furthermore, our results indicate the choice of LSM impacts simulated wind fields in WRF at heights relevant to the wind industry, at least for the Southern Great Plains region.

17 WIND ENERGY↗

SCALED EXPERIMENTS EVALUATING PULSE JET MIXING OF SLURRIES

Pulse jet mixing (PJM) tests with noncohesive solids in Newtonian liquid were conducted at three geometric scales to support the design of mixing systems for the Hanford Waste Treatment and Immobilization Plant. The test data will be used to develop mixing models. The models predict the cloud height (the height to which solids will be lifted by the PJM action) and the critical suspension velocity (the minimum velocity needed to ensure all solids have been lifted from the floor. From the cloud height estimate, the concentration of solids near the vessel floor and the minimum velocity predicted to lift solids can be calculated. The test objective was to observe the influence of vertically downward-directed jets on noncohesive solids in a series of scaled tanks with several bottom shapes. The test tanks and bottom shapes included small-and large-scale tanks with elliptical bottoms, a mid-scale tank with a spherical bottom, and a large-scale tank with an F&D bottom. During testing, the downward-directed jets were operated in either a steady flow condition or a pulsed (periodic) flow condition. The mobilization of the solids resulting from the jets was evaluated based on: the motion/agitation of the particulate on the tank floor and the elevation the solids reach within the tank; the height the solids material reaches in the tank is referred to as the cloud height (HC).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An experimental investigation of the transverse pressure gradient associated with curved free jets in the proximity of solid boundaries

An experiment has been performed to determine the mass flow and thrust augmentation associated with the flow of a two-dimensional incompressible jet issued parallel to an adjacent offset wall. A theoretical analysis based on a linear static pressure profile across the jet exit reveals that thrust augmentation is possible only for a wall offset of less than one half of the nozzle exit width. Mass flow augmentation measurements are in reasonable agreement with the proposed theory. Augmented mass flow of over three percent is observed directly, while thrust augmentation in excess of three percent is predicted when measured values of the pressure difference across the exiting jet are supplied to the theory. Measurements of the separation cavity length are presented which complement those given by previous investigators by extending the range to small values of the ratio of the wall offset to the slot height. For large offset ratios it is found that the cavity length approaches 1.25 times the wall offset distance. The initial radius of curvature of the jet centerline is found to be substantially greater than the mean radius of curvature over the cavity length, thereby indicating that the trajectory of the jet does not follow the arc of a circle as has been previously assumed.

Lund, T. S.↗

Influence of Turbulence on the Restraint of Liquid Jets by Surface Tension in Microgravity Investigated

Microgravity poses many challenges to the designer of spacecraft tanks. Chief among these are the lack of phase separation and the need to supply vapor-free liquid or liquidfree vapor to the spacecraft processes that require fluid. One of the principal problems of phase separation is the creation of liquid jets. A jet can be created by liquid filling, settling of the fluid to one end of the tank, or even closing a valve to stop the liquid flow. Anyone who has seen a fountain knows that jets occur in normal gravity also. However, in normal gravity, the gravity controls and restricts the jet flow. In microgravity, with gravity largely absent, surface tension forces must contain jets. To model this phenomenon, a numerical method that tracks the fluid motion and the surface tension forces is required. Jacqmin has developed a phase model that converts the discrete surface tension force into a barrier function that peaks at the free surface and decays rapidly away. Previous attempts at this formulation were criticized for smearing the interface. This can be overcome by sharpening the phase function, double gridding the fluid function, and using a higher order solution for the fluid function. The solution of this equation can be rewritten as two coupled Poisson equations that also include the velocity. After the code was implemented in axisymmetric form and verified by several test cases at the NASA Glenn Research Center, the drop tower runs of Aydelott were modeled. Work last year with a laminar model was found to overpredict Aydelott's results, except at the lowest Reynolds number conditions of 400. This year, a simple turbulence model was implemented by adding a turbulent viscosity based on the mixing-length hypothesis and empirical measurements of previous works. Predictions made after this change was implemented have been much closer to experimentally observed flow patterns and geyser heights. Two model runs is shown. The first, without any turbulence correction, breaks through the free surface and strikes the far end of the tank. In the second, the turbulence spreads the jet momentum over more of the free surface, enabling the surface tension forces to turn the jet back into the bulk liquid. The model geyser height with the second model is 1.1 cm. This is quite close to the 1.5-cm geyser height measured by Aydelott.

Chato, David J.↗