Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interatomic & molecular potentials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Temperature dependence of magnetic anisotropy and magnetoelasticity from classical spin-lattice calculations

Here we present a classical molecular-spin dynamics (MSD) methodology that enables accurate computations of the temperature dependence of the magnetocrystalline anisotropy as well as magnetoelastic properties of magnetic materials. The nonmagnetic interactions are accounted for by a spectral neighbor analysis potential (SNAP) machine-learned interatomic potential, whereas the magnetoelastic contributions are accounted for using a combination of an extended Heisenberg Hamiltonian and a Néel pair interaction model, representing both the exchange interaction and spin-orbit-coupling effects, respectively. All magnetoelastic potential components are parameterized using a combination of first-principles and experimental data. Our framework is applied to the α phase of iron. Initial testing of our MSD model is done using a 0 K parametrization of the Néel interaction model. After this, we examine how individual Néel parameters impact the $B$ 1 and $B$ 2 magnetostrictive coefficients using a moment-independent δ sensitivity analysis. The results from this study are then used to initialize a genetic algorithm optimization which explores the Néel parameter phase space and tries to minimize the error in the B 1 and B 2 magnetostrictive coefficients in the range of 0–1200 K. Our results show that while both the 0 K and genetic algorithm optimized parametrization provide good experimental agreement for $B$ 1 and $B$ 2 , only the genetic algorithm optimized results can capture the second peak in the $B$ 1 magnetostrictive coefficient which occurs near approximately 800 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Predicting thermophysical properties of molten salts in the MgCl 2 -NaCl-KCl-LiCl system with a shell-model potential

Ternary eutectic salts composed of MgCl 2 , NaCl, and KCl, referred to as MNK salts, have recently emerged as promising candidates as high-temperature heat transfer fluids and thermal energy storage media. Here we performed classical molecular dynamics (MD) simulations to predict the densities, specific heat capacities, viscosities, and ionic self-diffusivities for MNK salts over a wide temperature range. The impact of LiCl additive on their thermophysical properties was also investigated. To capture the electronic polarization of Cl anions by neighboring cations, we developed a novel shell-model potential using the force-matching method and a dataset of ab initio calculated interatomic forces. Our extensive MD simulations predict structure and properties for pure salts and binary/ternary salt mixtures in the MgCl 2 -NaCl-KCl-LiCl system in overall good agreement with available experimental and theoretical data, which corroborates the accuracy and reliability of our developed potential.

36 MATERIALS SCIENCE↗
DOE OSTI2020

chimes_calculator

The Chebyshev Interaction Model for Efficient Simulation (ChIMES) is a machine-learned interatomic potential targeting chemistry in condensed phase systems. ChIMES models are able to approach quantum-accuracy through a systematically improvable explicitly many-bodied basis comprised of linear combinations of Chebyshev polynomials. Though originally developed as to enable description of organic molecular materials, ChIMES has successfully been applied to systems spanning ambient water to molten carbon, and leveraged as correction for density functional based tight binding simulations. The ChIMES calculator comprises a flexible toolset for evaluating ChIMES interactions (e.g. in simulations, single point calculations, etc). Users have the option of directly imbedding the ChIMES calculator within their codes, or evaluating interactions through the beginner-friendly serial interface, each of which have Python, C++, C, and Fortran API's.

Goldman, Nir↗
DOE OSTI2026

Benchmarking the performance of uncertainty quantification methods for neural network-based interatomic potentials

Machine-learned interatomic potentials (ML-IAPs) continue to gain popularity as accurate, computationally efficient replacements for traditional, physics-based interatomic potentials and expensive ab initio methods. Uncertainty quantification (UQ) of ML-IAPs is a growing area of research as UQ is critical in many applications of IAPs, such as developing curated datasets, active learning-based data augmentation, self-improving models, and estimating the uncertainty of molecular dynamics simulations. In this paper, we construct and benchmark a series of different neural network potentials (NNPs) with varying network architectures to determine the performance of these models with respect to both the mean and uncertainty calibration error. Each NNP method is specifically designed to predict either epistemic or aleatoric uncertainty with particular focus on the differences in behavior between the epistemic and aleatoric uncertainty estimates. We benchmark these methods using multiple datasets common in the ML-IAP literature. The results show that the aleatoric uncertainty from single-shot model architectures is a competitive alternative to ensemble-based epistemic uncertainty predictions in regions of sufficient data-density. However, in regions where the representative data is sparse, aleatoric uncertainty models tend to overpredict and epistemic methods tend to underpredict the actual model error. We conclude that the type of UQ is crucial when discussing performance of probabilistic model results as different methods have different performance characteristics depending on the regime in which they are evaluated. Therefore, the type of UQ method should be carefully evaluated against both the data characteristics and requirements for the intended application.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Multistage nucleation pathway in LiF molten salt mirrors the crystal–melt interface structure

Despite over a century of studies, fundamental questions remain about the processes governing crystal nucleation from melts or solutions. Research over the past three decades has presented mounting evidence for kinetic pathways of crystal nucleation that are more complex than envisioned by the simplest forms of classical theory. Such observations have been presented for colloidal and elemental systems with covalent and metallic bonding. Despite the technological and geochemical importance of molten salts, similar studies for these ionically bonded systems are currently lacking. Here we develop a machine learning interatomic potential for a model ionic system: LiF. The potential features quantum-level accuracy for both liquid and multiple solid polymorphs over wide temperature and pressure ranges and accurately reproduces experimentally measured properties. Thanks to the efficiency of the potential, which enables microsecond-scale molecular dynamics simulations, induction times for nucleation of LiF solids from their melts are computed over a range of undercoolings. With the aid of a set of robust local order parameters established here, the simulations reveal that homogeneous crystal nucleation in undercooled melts preferentially initiates from liquid regions showing slow dynamics and high bond orientational order simultaneously, and the second-shell order of both precritical nuclei and the surface of postcritical nuclei is dominated by hexagonal close packing and body-centered cubic local structure, even though the nucleus core is dominated by face-centered cubic structure corresponding to the stable rocksalt crystal structure. Finally, we establish a connection between the crystallization pathway and the equilibrium crystal-melt interface structure.

Applied Physical Sciences↗
NASA NTRS2012

Development and Application of Interatomic Potentials for Ultra High Temperature Ceramics (UHTC): ZrB2 and HfB2

Ultra high temperature ceramics (UHTC) including ZrB2 and HfB2 are characterized by high melting point, good strength, and reasonable oxidation resistance. These materials are of interest for use as sharp leading edges for hypersonic vehicles among other applications. Progress in computational modeling of UHTCs has been limited in part due to the absence of suitable interatomic potentials. We present a Tersoff style parameterization of such potentials for ZrB2 and HfB2 appropriate for atomistic simulations. Parameters are fit to data generated from ab initio calculations. The accuracy of the potentials is assessed against further ab initio data. As a first non ]trivial application, molecular dynamics simulations are performed to evaluate the thermal conductivity of single crystals and the thermal resistance of high symmetry grain boundaries.

Lawson, John W.↗
DOE OSTI2024

Benchmarking machine learning interatomic potentials via phonon anharmonicity

Abstract Machine learning approaches have recently emerged as powerful tools to probe structure-property relationships in crystals and molecules. Specifically, machine learning interatomic potentials (MLIPs) can accurately reproduce first-principles data at a cost similar to that of conventional interatomic potential approaches. While MLIPs have been extensively tested across various classes of materials and molecules, a clear characterization of the anharmonic terms encoded in the MLIPs is lacking. Here, we benchmark popular MLIPs using the anharmonic vibrational Hamiltonian of ThO 2 in the fluorite crystal structure, which was constructed from density functional theory (DFT) using our highly accurate and efficient irreducible derivative methods. The anharmonic Hamiltonian was used to generate molecular dynamics (MD) trajectories, which were used to train three classes of MLIPs: Gaussian approximation potentials, artificial neural networks (ANN), and graph neural networks (GNN). The results were assessed by directly comparing phonons and their interactions, as well as phonon linewidths, phonon lineshifts, and thermal conductivity. The models were also trained on a DFT MD dataset, demonstrating good agreement up to fifth-order for the ANN and GNN. Our analysis demonstrates that MLIPs have great potential for accurately characterizing anharmonicity in materials systems at a fraction of the cost of conventional first principles-based approaches.

interatomic potentials↗
DOE OSTI2025

Cross-scale covariance for material property prediction

A simulation can stand its ground against an experiment only if its prediction uncertainty is known. The unknown accuracy of interatomic potentials (IPs) is a major source of prediction uncertainty, severely limiting the use of large-scale classical atomistic simulations in a wide range of scientific and engineering applications. Here we explore covariance between predictions of metal plasticity, from 178 large-scale (~10 8 atoms) molecular dynamics (MD) simulations, and a variety of indicator properties computed at small-scales (≤10 2 atoms). All simulations use the same 178 IPs. In a manner similar to statistical studies in public health, we analyze correlations of strength with indicators, identify the best predictor properties, and build a cross-scale “strength-on-predictors” regression model. This model is then used to estimate regression error over the statistical pool of IPs. Small-scale predictors found to be highly covariant with strength are computed using expensive quantum-accurate calculations and used to predict flow strength, within the statistical error bounds established in our study.

36 MATERIALS SCIENCE↗
NASA NTRS1997

Molecular Dynamics Simulation of a Multi-Walled Carbon Nanotube Based Gear

We used molecular dynamics to investigate the properties of a multi-walled carbon nanotube based gear. Previous work computationally suggested that molecular gears fashioned from (14,0) single-walled carbon nanotubes operate well at 50-100 gigahertz. The gears were formed from nanotubes with teeth added via a benzyne reaction known to occur with C60. A modified, parallelized version of Brenner's potential was used to model interatomic forces within each molecule. A Leonard-Jones 6-12 potential was used for forces between molecules. The gear in this study was based on the smallest multi-walled nanotube supported by some experimental evidence. Each gear was a (52,0) nanotube surrounding a (37,10) nanotube with approximate 20.4 and 16,8 A radii respectively. These sizes were chosen to be consistent with inter-tube spacing observed by and were slightly larger than graphite inter-layer spacings. The benzyne teeth were attached via 2+4 cycloaddition to exterior of the (52,0) tube. 2+4 bonds were used rather than the 2+2 bonds observed by Hoke since 2+4 bonds are preferred by naphthalene and quantum calculations by Jaffe suggest that 2+4 bonds are preferred on carbon nanotubes of sufficient diameter. One gear was 'powered' by forcing the atoms near the end of the outside buckytube to rotate to simulate a motor. A second gear was allowed to rotate by keeping the atoms near the end of its outside buckytube on a cylinder. The ends of both gears were constrained to stay in an approximately constant position relative to each other, simulating a casing, to insure that the gear teeth meshed. The stiff meshing aromatic gear teeth transferred angular momentum from the powered gear to the driven gear. The simulation was performed in a vacuum and with a software thermostat. Preliminary results suggest that the powered gear had trouble turning the driven gear without slip. The larger radius and greater mass of these gears relative to the (14,0) gears previously studied requires a smaller rotation rate and multiple rows of teeth to avoid excessive force on the gear teeth resulting, in slip and failure of the driven gear to turn. We hope that studies such as these will eventually lead to synthesis of components that can be assembled into atomically precise fullerene machines. These machines, in turn, may someday be used in machine-phase fullerene materials with remarkable properties.

Han, Jie↗
DOE OSTI2023

An Ab Initio -Derived Force Field for Amorphous Silica Interfaces for Use in Molecular Dynamics Simulations

Here, we present a classical interatomic force field, silica-DDEC, to describe the interactions of amorphous and crystalline silica surfaces, parametrized using density functional theory-based charges. Charge schemes for silica surfaces were developed using the density-derived electrostatic and chemical (DDEC) method, which reproduces atomic charges of the periodic models as well as the electrostatic potential away from the atom sites. Lennard–Jones parameters were determined by requiring the correct description of (i) the amorphous silica density, coordination defects, and local coordination geometry, relative to experimental measurements, and (ii) water-silica interatomic distances compared with ab initio results. Deprotonated surface silanol sites are also described within the model based on DDEC charges. The result is a general electronic structure-derived model for describing fully flexible amorphous and crystalline silica surfaces and interactions of liquids with silica surfaces of varying structure and protonation state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Next-Generation Materials Design: Quantum Mechanics and Data-Driven Modeling

The future of materials design is rapidly advancing through the combination of quantum mechanics and data-driven modeling. These approaches integrate quantum principles with advanced data analysis, enabling precise insights into material behavior. This talk will highlight recent progress in using these methods for computational design, particularly in high-entropy alloy catalysts, emphasizing the role of hierarchical machine-learning architectures for accurate predictions. Additionally, I will discuss our work on developing machine learning interatomic potentials (MLPs) for single-element metals, metal oxides, and alloys under extreme conditions, focusing on melting behavior and phase properties at high temperatures and pressures. We have also refined our MLP models to capture dynamic surface interactions, such as CO2 and CO adsorption on MgO, using both static and molecular dynamics simulations. These models maintain high accuracy while significantly reducing computational costs compared to first-principles calculations. By enabling efficient and accurate simulations, this work supports broader community adoption, optimizes datasets for materials discovery, and extends the accessible time, size, and environmental conditions beyond the limits of experiments and traditional simulations.

machine learning↗
NASA NTRS1990

A study of microkinetic adjustments required to match shock wave experiments and Monte Carlo Direct Simulation for a wide Mach number range

Shock wave thickness predictions from Monte Carlo Direct Simulations, using differential scattering and the Maitland-Smith-Aziz interatomic potential, underpredict experiments as shock Mach numbers increase above about 4. Examination of several sources of data has indicated that at relatively high energies the repulsive portion of accepted potentials such as the Maitland-Smith-Aziz may be too steep. An Exponential-6 potential due to Ross, based on high energy molecular beam scattering data and shock velocity measurements in liquid argon, has been combined with the lower energy portion of the Maitland-Smith-Aziz potential. When this hybrid potential is used in Monte Carlo Direct Simulations, agreement with experiments is improved over the previous predictions using the pure Maitland-Smith-Aziz form.

Pham-Van-diep, Gerald C.↗
DOE OSTI2020

Machine-learned interatomic potentials by active learning: amorphous and liquid hafnium dioxide

We propose an active learning scheme for automatically sampling a minimum number of uncorrelated configurations for fitting the Gaussian Approximation Potential (GAP). Our active learning scheme consists of an unsupervised machine learning (ML) scheme coupled with a Bayesian optimization technique that evaluates the GAP model. We apply this scheme to a Hafnium dioxide (HfO 2 ) dataset generated from a "melt-quench" ab initio molecular dynamics (AIMD) protocol. Our results show that the active learning scheme, with no prior knowledge of the dataset, is able to extract a configuration that reaches the required energy fit tolerance. Further, molecular dynamics (MD) simulations performed using this active learned GAP model on 6144 atom systems of amorphous and liquid state elucidate the structural properties of HfO 2 with near ab initio precision and quench rates (i.e., 1.0 K/ps) not accessible via AIMD. The melt and amorphous X-ray structural factors generated from our simulation are in good agreement with experiment. In addition, the calculated diffusion constants are in good agreement with previous ab initio studies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chemistry-mediated Ostwald ripening in carbon-rich C/O systems at extreme conditions

Abstract There is significant interest in establishing a capability for tailored synthesis of next-generation carbon-based nanomaterials due to their broad range of applications and high degree of tunability. High pressure (e.g., shockwave-driven) synthesis holds promise as an effective discovery method, but experimental challenges preclude elucidating the processes governing nanocarbon production from carbon-rich precursors that could otherwise guide efforts through the prohibitively expansive design space. Here we report findings from large scale atomistically-resolved simulations of carbon condensation from C/O mixtures subjected to extreme pressures and temperatures, made possible by machine-learned reactive interatomic potentials. We find that liquid nanocarbon formation follows classical growth kinetics driven by Ostwald ripening (i.e., growth of large clusters at the expense of shrinking small ones) and obeys dynamical scaling in a process mediated by carbon chemistry in the surrounding reactive fluid. The results provide direct insight into carbon condensation in a representative system and pave the way for its exploration in higher complexity organic materials. They also suggest that simulations using machine-learned interatomic potentials could eventually be employed as in-silico design tools for new nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Automated discovery of a robust interatomic potential for aluminum

Machine learning, trained on quantum mechanics (QM) calculations, is a powerful tool for modeling potential energy surfaces. A critical factor is the quality and diversity of the training dataset. Here we present a highly automated approach to dataset construction and demonstrate the method by building a potential for elemental aluminum (ANI-Al). In our active learning scheme, the ML potential under development is used to drive non-equilibrium molecular dynamics simulations with time-varying applied temperatures. Whenever a configuration is reached for which the ML uncertainty is large, new QM data is collected. The ML model is periodically retrained on all available QM data. The final ANI-Al potential makes very accurate predictions of radial distribution function in melt, liquid-solid coexistence curve, and crystal properties such as defect energies and barriers. We perform a 1.3M atom shock simulation and show that ANI-Al force predictions shine in their agreement with new reference DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deep learning-based quasi-continuum theory for structure of confined fluids

Predicting the structural properties of water and simple fluids confined in nanometer scale pores and channels is essential in, for example, energy storage and biomolecular systems. Classical continuum theories fail to accurately capture the interfacial structure of fluids. In this work, we develop a deep learning-based quasi-continuum theory (DL-QT) to predict the concentration and potential profiles of a Lennard-Jones (LJ) fluid and water confined in a nanochannel. The deep learning model is built based on a convolutional encoder–decoder network (CED) and is applied for high-dimensional surrogate modeling to relate the fluid properties to the fluid–fluid potential. The CED model is then combined with the interatomic potential-based continuum theory to determine the concentration profiles of a confined LJ fluid and confined water. Further, we show that the DL-QT model exhibits robust predictive performance for a confined LJ fluid under various thermodynamic states and for water confined in a nanochannel of different widths. The DL-QT model seamlessly connects molecular physics at the nanoscale with continuum theory by using a deep learning model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Data efficiency and extrapolation trends in neural network interatomic potentials

Abstract Recently, key architectural advances have been proposed for neural network interatomic potentials (NNIPs), such as incorporating message-passing networks, equivariance, or many-body expansion terms. Although modern NNIP models exhibit small differences in test accuracy, this metric is still considered the main target when developing new NNIP architectures. In this work, we show how architectural and optimization choices influence the generalization of NNIPs, revealing trends in molecular dynamics (MD) stability, data efficiency, and loss landscapes. Using the 3BPA dataset, we uncover trends in NNIP errors and robustness to noise, showing these metrics are insufficient to predict MD stability in the high-accuracy regime. With a large-scale study on NequIP, MACE, and their optimizers, we show that our metric of loss entropy predicts out-of-distribution error and data efficiency despite being computed only on the training set. This work provides a deep learning justification for probing extrapolation and can inform the development of next-generation NNIPs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-pressure and temperature neural network reactive force field for energetic materials

Reactive force fields for molecular dynamics have enabled a wide range of studies in numerous material classes. These force fields are computationally inexpensive compared with electronic structure calculations and allow for simulations of millions of atoms. However, the accuracy of traditional force fields is limited by their functional forms, preventing continual refinement and improvement. Therefore, we develop a neural network-based reactive interatomic potential for the prediction of the mechanical, thermal, and chemical responses of energetic materials at extreme conditions. The training set is expanded in an automatic iterative approach and consists of various CHNO materials and their reactions under ambient and shock-loading conditions. Further, this new potential shows improved accuracy over the current state-of-the-art force fields for a wide range of properties such as detonation performance, decomposition product formation, and vibrational spectra under ambient and shock-loading conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗