Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “information extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Estimating Bare Earth in Sparse Boreal Forests With WorldView Stereo Imagery

Circumboreal forests are currently experiencing rapid climate warming which is altering their structure, productivity, and status as a carbon sink. Very-high resolution (VHR, <2 m) stereo derived digital surface models are available to monitor these forests, but, a similar resolution digital terrain model (DTM) is required to extract information about tree height, which is often used to estimate carbon content. To our knowledge, no openly available VHR DTM currently exists. To address this need, we developed approaches to extract DTMs by filtering VHR stereo point clouds (PCs) in sparse canopies of Alaska. Our evaluation consisted of two stereo processing methods with three PC search radii, at six different tree canopy cover (TCC) intervals. We found VHR DTMs were robust for estimating bare ground at TCC intervals less than 40% with vertical errors <1.6 m using airborne small footprint light detection and ranging (LiDAR) as reference.

Christopher S R Neigh↗

Estimating Bare Earth in Sparse Boreal Forests With WorldView Stereo Imagery

Circumboreal forests are currently experiencing rapid climate warming which is altering their structure, productivity, and status as a carbon sink. Very-high resolution (VHR, <2 m) stereo derived digital surface models are available to monitor these forests, but, a similar resolution digital terrain model (DTM) is required to extract information about tree height, which is often used to estimate carbon content. To our knowledge, no openly available VHR DTM currently exists. To address this need, we developed approaches to extract DTMs by filtering VHR stereo point clouds (PCs) in sparse canopies of Alaska. Our evaluation consisted of two stereo processing methods with three PC search radii, at six different tree canopy cover (TCC) intervals. We found VHR DTMs were robust for estimating bare ground at TCC intervals less than 40% with vertical errors <1.6 m using airborne small footprint light detection and ranging (LiDAR) as reference.

Christopher S. R. Neigh↗

SU-F-R-38: Impact of Smoothing and Noise On Robustness of CBCT Textural Features for Prediction of Response to Radiotherapy Treatment of Head and Neck Cancers

Purpose: To examine the impact of image smoothing and noise on the robustness of textural information extracted from CBCT images for prediction of radiotherapy response for patients with head/neck (H/N) cancers. Methods: CBCT image datasets for 14 patients with H/N cancer treated with radiation (70 Gy in 35 fractions) were investigated. A deformable registration algorithm was used to fuse planning CT’s to CBCT’s. Tumor volume was automatically segmented on each CBCT image dataset. Local control at 1-year was used to classify 8 patients as responders (R), and 6 as non-responders (NR). A smoothing filter [2D Adaptive Weiner (2DAW) with 3 different windows (ψ=3, 5, and 7)], and two noise models (Poisson and Gaussian, SNR=25) were implemented, and independently applied to CBCT images. Twenty-two textural features, describing the spatial arrangement of voxel intensities calculated from gray-level co-occurrence matrices, were extracted for all tumor volumes. Results: Relative to CBCT images without smoothing, none of 22 textural features extracted showed any significant differences when smoothing was applied (using the 2DAW with filtering parameters of ψ=3 and 5), in the responder and non-responder groups. When smoothing, 2DAW with ψ=7 was applied, one textural feature, Information Measure of Correlation, was significantly different relative to no smoothing. Only 4 features (Energy, Entropy, Homogeneity, and Maximum-Probability) were found to be statistically different between the R and NR groups (Table 1). These features remained statistically significant discriminators for R and NR groups in presence of noise and smoothing. Conclusion: This preliminary work suggests that textural classifiers for response prediction, extracted from H&N CBCT images, are robust to low-power noise and low-pass filtering. While other types of filters will alter the spatial frequencies differently, these results are promising. The current study is subject to Type II errors. A much larger cohort of patients is needed to confirm these results. This work was supported in part by a grant from Varian Medical Systems (Palo Alto, CA)

60 APPLIED LIFE SCIENCES↗

Adaptively driven X-ray diffraction guided by machine learning for autonomous phase identification

Machine learning (ML) has become a valuable tool to assist and improve materials characterization, enabling automated interpretation of experimental results with techniques such as X-ray diffraction (XRD) and electron microscopy. Because ML models are fast once trained, there is a key opportunity to bring interpretation in-line with experiments and make on-the-fly decisions to achieve optimal measurement effectiveness, which creates broad opportunities for rapid learning and information extraction from experiments. Here, we demonstrate such a capability with the development of autonomous and adaptive XRD. By coupling an ML algorithm with a physical diffractometer, this method integrates diffraction and analysis such that early experimental information is leveraged to steer measurements toward features that improve the confidence of a model trained to identify crystalline phases. We validate the effectiveness of an adaptive approach by showing that ML-driven XRD can accurately detect trace amounts of materials in multi-phase mixtures with short measurement times. The improved speed of phase detection also enables in situ identification of short-lived intermediate phases formed during solid-state reactions using a standard in-house diffractometer. Our findings showcase the advantages of in-line ML for materials characterization and point to the possibility of more general approaches for adaptive experimentation.

36 MATERIALS SCIENCE↗

Oscillations in the primordial bispectrum: Mode expansion

We consider the presence of oscillations in the primordial bispectrum, inspired by three different cosmological models; features in the primordial potential, resonant type non-Gaussianities, and deviation from the standard Bunch-Davies vacuum. In order to put constraints on their bispectra, a logical first step is to put these into a factorized form which can be achieved via the recently proposed method of polynomial basis expansion on the tetrahedral domain. We investigate the viability of such an expansion for the oscillatory bispectra and find that one needs an increasing number of orthonormal mode functions to achieve a significant correlation between the expansion and the original spectrum as a function of their frequency. To reduce the number of modes required, we propose a basis consisting of Fourier functions orthonormalized on the tetrahedral domain. We show that the use of Fourier mode functions instead of polynomial mode functions can lead to the necessary factorizability with the use of only 1/5 of the total number of modes required to reconstruct the bispectra with polynomial mode functions. Moreover, from an observational perspective, the expansion has unique signatures depending on the orientation of the oscillation due to a resonance effect between the mode functions and the original spectrum. This effect opens the possibility to extract information about both the frequency of the bispectrum as well as its shape while considering only a limited number of modes. The resonance effect is independent of the phase of the reconstructed bispectrum suggesting Fourier mode extraction could be an efficient way to detect oscillatory bispectra in the data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Information science team

Concerns are expressed about the data handling aspects of system design and about enabling technology for data handling and data analysis. The status, contributing factors, critical issues, and recommendations for investigations are listed for data handling, rectification and registration, and information extraction. Potential supports to individual P.I., research tasks, systematic data system design, and to system operation. The need for an airborne spectrometer class instrument for fundamental research in high spectral and spatial resolution is indicated. Geographic information system formatting and labelling techniques, very large scale integration, and methods for providing multitype data sets must also be developed.

Billingsley, F.↗

Nuclear spectroscopy with heavy ion nucleon knockout and (p,2p) reactions

Knockout reactions with heavy ion targets in inverse kinematics, as well as “quasifree” (p,2p) and (p,pn) reactions are useful tools for nuclear spectroscopy. We report calculations on ab initio many-body wave functions based on the no-core shell model to study the nucleon removal reactions in light nuclei, including beryllium, carbon, and oxygen isotopic chains, and explore the importance of using an ab initio method. Our study helps to clarify how the extraction of spectroscopic factors from the experiments depend on the details of the many-body wave functions being probed. We show that recent advances with the ab initio method can provide more insights on the spectroscopy information extracted from experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Understanding Solution State Conformation and Aggregate Structure of Conjugated Polymers via Small Angle X-ray Scattering

Donor-acceptor (D-A) conjugated polymers are high-performance organic electronic materials that exhibit complex aggregation behavior. Understanding the solution state conformation and aggregation of conjugated polymers is crucial for controlling morphology during thin-film deposition and the subsequent electronic performance. However, a precise multiscale structure of solution state aggregates is lacking. Here, we present an in-depth small-angle X-ray scattering (SAXS) analysis of the solution state structure of an isoindigo-bithiophene-based D-A polymer (PII-2T) in chlorobenzene and decane as our primary system. Modeling the system as a combination of hierarchical fibrillar aggregates mixed with dispersed polymers, we extract information about conformation and multiscale aggregation and also clarify the physical origin of features often observed but unaddressed or misinterpreted in small-angle scattering patterns of conjugated polymers. The persistence length of the D-A polymer extracted from SAXS agrees well with a theoretical model based on the dihedral potentials. Additionally, we show that the broad high q structure factor peak seen in scattering profiles can be attributed to lamellar stacking occurring within the fibril aggregates and that the low q aggregate scattering is strongly influenced by the polymer molecular weight. Overall, the SAXS profiles of D-A polymers in general exhibit a sensitive dependence on the co-existence of fibrillar aggregate and dispersed polymer chain populations. We corroborate our findings from SAXS with electron microscopy of freeze-dried samples for direct imaging of fibrillar aggregates. Finally, we demonstrate the generality of our approach by fitting the scattering profiles of a variety of D-A polymers based on thieno-isoindigo (PTII-2T), diketopyrrolopyrrole (DPP2T-TT, DPP-BTZ, PDPP2FT-C- 16 ), naphthalenediimide (P(NDI2OD-T2)), and a conjugated block copolymer P3HT-b-DPPT-T. The results presented here establish a picture of the D-A polymer solution state structure and provide a general method of interpreting and analyzing their scattering profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Progress Update on Segmentation of Neutron Tomographic Images, 2018

The present report documents the techniques developed to segment fast-neutron tomographic images of objects consisting of assemblies of machined parts with distinct boundaries. This report satisfies the fiscal year 2018 technical deliverable for project OR16-3DTomography-PD3Jb, “3D Tomography and Image Processing Using Fast Neutrons,” to report on the extension of geometric shape-finding algorithms to three dimensions. The project has two overall goals. The first of these goals is to extend associated-particle fast-neutron transmission and, particularly, induced-reaction tomographic imaging algorithms to three dimensions. This aspect of the project is beyond the scope of this report. The second goal is to automatically segment the resultant tomographic images into constituent parts and then extract information about the parts, such as the class of shape and potentially the shape parameters. This report describes progress for the image segmentation part of the project. Imaging techniques have been developed as high-confidence methods for confirming the presence and configuration of special nuclear materials (SNM). This high confidence is achieved at the cost of revealing considerable information that may be undesirable to share with the operator of the equipment. One potential way to make use of the high-confidence of imaging methods without revealing imaging data is to employ automated analysis that can extract meaningful attributes of the SNM without showing imaging data to the operator. An essential step of this automated analysis is the segmentation of the image into its constituent parts. For example, a three-dimensional (3D) fast-neutron tomographic image of an assembly containing uranium could be reconstructed and then segmented into discrete parts. The properties of a constituent part identified as uranium would be of interest and could be extracted. For instance, the volume and density of the part would together determine its mass. Moreover, its shape might be expected to fall into a particular geometric class, such as a cube, cylinder, or sphere, and the parameters of the shape (such as side length, height, or diameter) would be expected to fall in a given range. In such an analysis, automated identification of the boundaries and properties of the uranium part is an essential step. A key goal of the present work is to infer the boundaries of objects in fast-neutron tomographic images via the general method of image segmentation. Development of this capability can be broken into more manageable steps, including 1. operator-guided segmentation of two-dimensional (2D) fast-neutron tomographic images, 2. operator-guided segmentation of 3D fast-neutron tomographic images, 3. development of automated segmentation algorithms, and 4. extraction of shape parameters from constituent volumes in 3D. In the first year, the project team reported progress on the first step. Last year, progress on the second step, the extension into 3D, was reported with application to simulated data. The present report describes additional progress on the second step, and progress toward the third step, automated segmentation algorithms. In particular, a multiphase level set approach for image segmentation in three dimensions has been applied to measured 3D data for the first time. Activities related to the fourth step will also be reported, but it will focus on estimation of 3D volumes rather than shape parameters. In this report, the steps before image segmentation will be described, and the multiphase level sets approach to image segmentation will be briefly reviewed. This will be followed by a discussion of the issues encountered when applying the level set technique to measured 3D transmission images, and then a description of the inclusion of induced-reaction data will be provided. Finally, segmentation results for various measured target assemblies will be presented and the image segmentation portion of this project will be summarized and future directions will be discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

From BERTopic to SysML: Informing Model-Based Failure Analysis With Natural Language Processing for Complex Aerospace Systems

The development of emerging complex aerospace systems will require new approaches for capturing safety incident scenarios as early as possible in the design phase. However, for novel systems, relevant data available is limited. In this work, we propose a framework informing model-based mission assurance activities with historical incident reports, lessons learned, or other relevant engineering documents using natural language processing. In doing so, we investigate whether there is useful information in data sets that are relevant, if not identical, to the system under design and whether, through rigorous systems engineering practice, this information can be effectively leveraged through model-based failure analysis. In a worked case study, we apply state-of-the-art topic modeling techniques to two data sets, a mission relevant data set and a system relevant data set. The sets of topics are merged and interpreted to form a preliminary list of failure topics that can be used to inform the identification of off-nominal modes in the model-based failure modes and effects analysis development. Once data from the system in operation is available, it can be used to update the topics identified. By extracting information about likely failures from relevant historical data sets and utilizing model-based mission assurance to ensure relevance and rigor, unanticipated failures can be reduced, and projects can more effectively learn from past missions.

Failure Analysis↗

From BERTopic to SysML: Informing Model-Based Failure Analysis With Natural Language Processing for Complex Aerospace Systems

The development of emerging complex aerospace systems will require new approaches for capturing safety incident scenarios as early as possible in the design phase. However, for novel systems, relevant data available is limited. In this work, we propose a framework informing model-based mission assurance activities with historical incident reports, lessons learned, or other relevant engineering documents using natural language processing. In doing so, we investigate whether there is useful information in data sets that are relevant, if not identical, to the system under design and whether, through rigorous systems engineering practice, this information can be effectively leveraged through model-based failure analysis. In a worked case study, we apply state-of-the-art topic modeling techniques to two data sets, a mission relevant data set and a system relevant data set. The sets of topics are merged and interpreted to form a preliminary list of failure topics that can be used to inform the identification of off-nominal modes in the model-based failure modes and effects analysis development. Once data from the system in operation is available, it can be used to update the topics identified. By extracting information about likely failures from relevant historical data sets and utilizing model-based mission assurance to ensure relevance and rigor, unanticipated failures can be reduced, and projects can more effectively learn from past missions.

Failure Analysis↗

SU-E-J-252: A Motion Algorithm to Extract Physical and Motion Parameters of a Mobile Target in Cone-Beam Computed Tomographic Imaging Retrospective to Image Reconstruction

Purpose: A motion algorithm was developed to extract actual length, CT-numbers and motion amplitude of a mobile target imaged with cone-beam-CT (CBCT) retrospective to image-reconstruction. Methods: The motion model considered a mobile target moving with a sinusoidal motion and employed three measurable parameters: apparent length, CT number level and gradient of a mobile target obtained from CBCT images to extract information about the actual length and CT number value of the stationary target and motion amplitude. The algorithm was verified experimentally with a mobile phantom setup that has three targets with different sizes manufactured from homogenous tissue-equivalent gel material embedded into a thorax phantom. The phantom moved sinusoidal in one-direction using eight amplitudes (0–20mm) and a frequency of 15-cycles-per-minute. The model required imaging parameters such as slice thickness, imaging time. Results: This motion algorithm extracted three unknown parameters: length of the target, CT-number-level, motion amplitude for a mobile target retrospective to CBCT image reconstruction. The algorithm relates three unknown parameters to measurable apparent length, CT-number-level and gradient for well-defined mobile targets obtained from CBCT images. The motion model agreed with measured apparent lengths which were dependent on actual length of the target and motion amplitude. The cumulative CT-number for a mobile target was dependent on CT-number-level of the stationary target and motion amplitude. The gradient of the CT-distribution of mobile target is dependent on the stationary CT-number-level, actual target length along the direction of motion, and motion amplitude. Motion frequency and phase did not affect the elongation and CT-number distributions of mobile targets when imaging time included several motion cycles. Conclusion: The motion algorithm developed in this study has potential applications in diagnostic CT imaging and radiotherapy to extract actual length, size and CT-numbers distorted by motion in CBCT imaging. The model provides further information about motion of the target.

60 APPLIED LIFE SCIENCES↗

SeqMask: Behavior Extraction Over Cyber Threat Intelligence Via Multi-Instance Learning

Abstract Identification and extraction of Tactics, Techniques and Procedures (TTPs) for Cyber Threat Intelligence (CTI) restore the full picture of cyber attacks and guide the analysts to assess the system risk. Existing frameworks can hardly provide uniform and complete processing mechanisms for TTPs information extraction without adequate knowledge background. A multi-instance learning approach named SeqMask is proposed in this paper as a solution. SeqMask extracts behavior keywords from CTI evaluated by the semantic impact, and predicts TTPs labels by conditional probabilities. Still, the framework has two mechanisms to determine the validity of keywords. One using expert experience verification. The other verifies the distortion of the classification effect by blocking existing keywords. In the experiments, SeqMask reached 86.07% and 73.99% in F1 scores for TTPs classifications. For the top 20% of keywords, the expert approval rating is 92.20%, where the average repetition of keywords whose scores between 100% and 90% is 60.02%. Particularly, when the top 65% of the keywords were blocked, the F1 decreased to about 50%; when removing the top 50%, the F1 was under 31%. Further, we also validate the possibility of extracting TTPs from full-size CTI and malware whose F1 are improved by 2.16% and 0.81%.

Ge, Wenhan↗

TBS (Trabecular Bone Score) Expands Understanding of Spaceflight Effects on the Lumbar Spine of Long-Duration Astronauts

Bone loss due to long‐duration spaceflight has been characterized by both DXA and QCT serial scans. It is unclear if these spaceflight‐induced changes in bone mineral density (BMD) and structure result in increased fracture incidence. NASA astronauts currently fly 5 to 6‐month missions on the International Space Station (ISS) and at least one 12‐month mission is planned. While NASA has measured areal BMD (by DXA) and volumetric BMD (by QCT) and has estimated hip strength (by finite element models of QCT data, no method has yet been used to examine bone micro‐architecture from lumbar spine (LS). DXA scans are routinely performed pre‐ and postflight on all ISS astronauts to follow BMD changes associated with spaceflight. Trabecular Bone Score (TBS) is a relatively new method that measures grey‐scale‐level texture information extracted from LS DXA images and correlates with 3D parameters of bone micro‐architecture. We evaluated the ability of LS TBS to discriminate changes in astronauts who have flown on ISS missions and to determine if TBS can provide additional information compared to DXA. Methods: Lumbar Spine (L1‐4) DXA scans from 51 astronauts (mean age, 47 +/- 4 yrs) were divided into 3 groups based on the exercise regimens performed onboard the ISS. "Pre‐ARED" (exercise using a load‐limited resistive exercise device, <300 lb), "ARED" (exercise with a high‐load resistive exercise device, up to 600 lb) and "Bisphos+ARED" group (ARED exercise and a 70‐mg alendronate tablet once a week before and during flight, starting 17 days before launch). DXA scans were performed and analyzed on a Hologic Discovery W using the same technician for the pre‐ and post‐flight scans. LSC for the LS in our laboratory is 0.025 g/sq. cm. TBS was performed at the Mercy Hospital, Cincinnati, Ohio on a similar Hologic computer. Data were analyzed using a paired, 2‐tailed Student's t‐test for the difference between pre‐ and postflight means. Percent change and % change per month are noted. Interpretation: Our data suggest that: TBS and DXA both detected significant decrements in the LS in these pre‐ ARED astronauts, not unexpected given the insufficient loads provided by this early exercise device. TBS did not detect significant changes in the ARED or Bisphos+ARED groups while DXA did detect significant changes in the ARED astronauts. These findings suggest that DXA and TBS are detecting independent effects of bone loss interventions tested in ISS astronauts in space, which may be due to distinct effects of interventions on mineral content of separate cortical vs. trabecular bone. Conclusion: TBS, in conjunction with DXA BMD, may provide additional insight into the nature of changes (or lack thereof) in the microstructure of trabecular bone and the areal BMD of vertebral bodies.

Smith, Scott A.↗

Simultaneous hierarchical segmentation and vectorization of satellite images through combined data sampling and anisotropic triangulation

The automatic detection, recognition , and segmentation of object classes in remote sensed images is of crucial importance for scene interpretation and understanding. However, it is a difficult task because of the high variability of satellite data. Indeed, the observed scenes usually exhibit a high degree of complexity, where complexity refers to the large variety of pictorial representations of objects with the same semantic meaning and also to the extensive amount of available det.ails. Therefore, there is still a strong demand for robust techniques for automatic information extraction and interpretation of satellite images. In parallel, there is a growing interest in techniques that can extract vector features directly from such imagery. In this paper, we investigate the problem of automatic hierarchical segmentation and vectorization of multispectral satellite images. We propose a new algorithm composed of the following steps: (i) a non-uniform sampling scheme extracting most salient pixels in the image, (ii) an anisotropic triangulation constrained by the sampled pixels taking into account both strength and directionality of local structures present in the image, (iii) a polygonal grouping scheme merging, through techniques based on perceptual information , the obtained segments to a smaller quantity of superior vectorial objects. Besides its computational efficiency, this approach provides a meaningful polygonal representation for subsequent image analysis and/or interpretation.

47 OTHER INSTRUMENTATION↗

Machine processing methods for earth observational data

A brief review of the development over the last decade of earth resource information systems is presented. Machine data preprocessing and analysis methods are surveyed and illustrated. These include preprocessing steps intended to modify geometric and radiometric aspects of earth observational image data to enhance the ability of either human interpreters or machine algorithms to extract information from the data. Illustrations of processed and analyzed images from spaceborne sensors including the Earth Resources Technology Satellite are discussed.

Landgrebe, D. A.↗

TBS (Trabecular Bone Score) Expands Understanding of Spaceflight Effects on the Lumbar Spine of Long Duration Astronauts

Background: Bone loss due to long-duration spaceflight has been characterized by both DXA and QCT serial scans. It is unclear if these spaceflight-induced changes in bone mineral density and structure result in increased fracture incidence. NASA astronauts currently fly on 5-6-month missions on the International Space Station (ISS) and at least one 12-month mission is planned. While NASA has measured areal BMD (by DXA) and volumetric BMD (by QCT), and has estimated hip strength (by finite element models of QCT data, no method has yet been used to examine bone microarchitecture from lumbar spine (LS). DXA scans are routinely performed pre- and post-flight on all ISS astronauts to follow BMD changes associated with space flight. Trabecular Bone Score (TBS) is a relatively new method that measures grey-scale-level texture information extracted from lumbar spine DXA images and correlates with 3D parameters of bone micro-architecture. We evaluated the ability of LS TBS to discriminate changes in astronauts who have flown on ISS missions and to determine if TBS can provide additional information compared to DXA. Methods: LS (L1-4) DXA scans from 51 astronauts (mean age, 47 +/- 4) were divided into 3 groups based on the exercise regimes performed while onboard the ISS. Pre-ARED (exercise using a load-limited resistive exercise device, <300lb), ARED (exercise with a high-load resistive exercise device, up to 600lb) and a Bisphos group (ARED exercise and a 70-mg alendronate tablet once a week before and during flight, starting 17 days before launch). DXA scans were performed and analyzed on a Hologic Discovery W using the same technician for the pre- and postflight scans. LSC for the LS in our laboratory is 0.025 g/cm2. TBS was performed at the Mercy Hospital, Cincinnati, Ohio on a similar Hologic computer. TBS precision was calculated from 16 comparable test subjects (0.0XX g/cm2). Data were preliminary analyzed using a paired, 2-tailed t-test for the difference between pre- and postflight means.

Sibonga, Jean D.↗

Spectral identification of minerals using imaging spectrometry data: Evaluating the effects of signal to noise and spectral resolution using the tricorder algorithm

The rapid development of sophisticated imaging spectrometers and resulting flood of imaging spectrometry data has prompted a rapid parallel development of spectral-information extraction technology. Even though these extraction techniques have evolved along different lines (band-shape fitting, endmember unmixing, near-infrared analysis, neural-network fitting, and expert systems to name a few), all are limited by the spectrometer's signal to noise (S/N) and spectral resolution in producing useful information. This study grew from a need to quantitatively determine what effects these parameters have on our ability to differentiate between mineral absorption features using a band-shape fitting algorithm. We chose to evaluate the AVIRIS, HYDICE, MIVIS, GERIS, VIMS, NIMS, and ASTER instruments because they collect data over wide S/N and spectral-resolution ranges. The study evaluates the performance of the Tricorder algorithm, in differentiating between mineral spectra in the 0.4-2.5 micrometer spectral region. The strength of the Tricorder algorithm is in its ability to produce an easily understood comparison of band shape that can concentrate on small relevant portions of the spectra, giving it an advantage over most unmixing schemes, and in that it need not spend large amounts of time reoptimizing each time a new mineral component is added to its reference library, as is the case with neural-network schemes. We believe the flexibility of the Tricorder algorithm is unparalleled among spectral-extraction techniques and that the results from this study, although dealing with minerals, will have direct applications to spectral identification in other disciplines.

Swayze, Gregg A.↗