Fuel Cell System Cost for Transportation-2008 Cost Estimate (Book)
Independent review prepared for the U.S. Department of Energy (DOE) Hydrogen, Fuel Cells and Infrastructure Technologies (HFCIT) Program Manager.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Independent review prepared for the U.S. Department of Energy (DOE) Hydrogen, Fuel Cells and Infrastructure Technologies (HFCIT) Program Manager.
As the global need for energy increases, scientists and engineers have found a possible solution by using hydrogen to power our world. Although hydrogen can be combusted as a fuel, it is considered an energy carrier for use in fuel cells wherein it is consumed (oxidized) without the production of greenhouse gases and produces electrical energy with high efficiency. Chemical storage of hydrogen involves release of hydrogen in a controlled manner from materials in which the hydrogen is covalently bound. Sodium borohydride and aminoborane are two materials given consideration as chemical hydrogen storage materials by the US Department of Energy. A very significant barrier to adoption of these materials as hydrogen carriers is their regeneration from 'spent fuel,' i.e., the material remaining after discharge of hydrogen. The U.S. Department of Energy (DOE) formed a Center of Excellence for Chemical Hydrogen Storage, and this work stems from that project. The DOE has identified boron hydrides as being the main compounds of interest as hydrogen storage materials. The various boron hydrides are then oxidized to release their hydrogen, thereby forming a 'spent fuel' in the form of a lower boron hydride or even a boron oxide. The ultimate goal of this project is to take the oxidized boron hydrides as the spent fuel and hydrogenate them back to their original form so they can be used again as a fuel. Thus this research is essentially a boron hydride recycling project. In this report, research directed at regeneration of sodium borohydride and aminoborane is described. For sodium borohydride, electrochemical reduction of boric acid and sodium metaborate (representing spent fuel) in alkaline, aqueous solution has been investigated. Similarly to literature reports (primarily patents), a variety of cathode materials were tried in these experiments. Additionally, approaches directed at overcoming electrostatic repulsion of borate anion from the cathode, not described in the previous literature for electrochemical reduction of spent fuels, have been attempted. A quantitative analytical method for measuring the concentration of sodium borohydride in alkaline aqueous solution has been developed as part of this work and is described herein. Finally, findings from stability tests for sodium borohydride in aqueous solutions of several different compositions are reported. For aminoborane, other research institutes have developed regeneration schemes involving tributyltin hydride. In this report, electrochemical reduction experiments attempting to regenerate tributyltin hydride from tributyltin chloride (a representative by-product of the regeneration scheme) are described. These experiments were performed in the non-aqueous solvents acetonitrile and 1,2-dimethoxyethane. A non-aqueous reference electrode for electrolysis experiments in acetonitrile was developed and is described. One class of boron hydrides, called polyhedral boranes, became of interest to the DOE due to their ability to contain a sufficient amount of hydrogen to meet program goals and because of their physical and chemical safety attributes. Unfortunately, the research performed here has shown that polyhedral boranes do not react in such a way as to allow enough hydrogen to be released, nor do they appear to undergo hydrogenation from the spent fuel form back to the original hydride. After the polyhedral boranes were investigated, the project goals remained the same but the hydrogen storage material was switched by the DOE to ammonia borane. Ammonia borane was found to undergo an irreversible hydrogen release process, so a direct hydrogenation was not able to occur. To achieve the hydrogenation of the spent ammonia borane fuel, an indirect hydrogenation reaction is possible by using compounds called organotin hydrides. In this process, the organotin hydrides will hydrogenate the spent ammonia borane fuel at the cost of their own oxidation, which forms organotin halides. To enable a closed-loop cycle, our task was then to be able to hydrogenate the organotin halides back to their hydride form. In addition to this experimental work, a parallel project was carried out to develop a new model of electrochemical impedance spectroscopy (EIS) that could be used to define the mechanisms of the electrochemical hydrogenation reactions. The EIS technique is capable of probing complex chemical and electrochemical reactions, and our model was written into a computer code that allowed the input of experimental EIS data and the extraction of kinetic parameters based on a best-fit analysis of theoretical reaction schemes. Finally, electrochemical methods for hydrogenating organic and metallo-organic materials have been explored.
Mesoporous ceria, which was synthesized under supercritical conditions, was found to be an effective support material of Ni catalyst for the in-situ hydrogenation of m-cresol (a representative compound of bio-oil) using secondary alcohols of 2-propanol (2-PrOH) and 2-butanol (2-BuOH) as a hydrogen source (H-donor) to produce 3-methylcyclohexanol, 3-methylcyclohexene, and methylcyclohexane under a H2 gas-free atmosphere. The activities of different metal catalysts (Ni, Cu, and Co) for the in-situ hydrogenation of m-cresol were examined using 2-PrOH as a H-donor. Total and effective conversion of m-cresol achieved only over Ni/CeO 2 because of its fair catalytic properties, as determined by N2 adsorption-desorption, hydrogen temperature-programmed reduction, ammonia temperature-programmed desorption, X-ray diffraction, and transmission electron microscopy. The dependence of Ni/CeO2 performance on the reaction time (4-6 h) and Ni loading (3-9 wt%) was examined from the in-situ hydrogenation of m-cresol with 2-PrOH. The deactivation test of Ni/CeO 2 was performed by reusing the spent catalyst, which was then regenerated through successive oxidation and reduction, several times in the m-cresol transformation employing 2-PrOH as a H-donor. In addition to m-cresol, other phenolic model compounds of bio-oil, such as anisole, phenol, and guaiacol, were also treated by in-situ hydrogenation with 2-PrOH over Ni/CeO 2 . Although this catalyst was effective for phenol and guaiacol transformation, it was relatively ineffective for anisole conversion. The in-situ hydrogenation of crude bio-oil with 2-PrOH and 2-BuOH was accomplished over the Ni/CeO 2 catalyst, resulting in a refined bio-oil with a 37.5-38.9% lower oxygen content and a high heating value (HHV) of up to 25 MJ/kg.
This document summarizes the results of the benefits analysis of EERE’s programs, as described in the FY 2007 Budget Request.
In this work, we synthesized a unique carbon nanosphere (CNS)-encapsulated Fe core–shell catalyst (CNS–Fe) for CO 2 hydrogenation. The synthesized CNS–Fe catalyst exhibited a core–shell structure with a core of ca. 40 nm containing iron species and a shell thickness of ca. 10 nm composed of mainly graphitic carbon. X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, and thermogravimetric analysis were used to characterize the fresh and spent CNS–Fe catalysts and reveal a mixture of Fe 3 O 4 , metallic Fe, and Fe 5 C 2 in the core and graphitic carbon as the shell with defect sites. Hydrogen temperature-programmed reduction, X-ray absorption near-edge structure, and extended X-ray absorption fine structure for the fresh CNS–Fe confirmed the composition of the iron species encapsulated in the CNS. The catalytic performance of CNS–Fe was investigated at ambient pressure for CO2 hydrogenation with hydrocarbons (CH 4 , C 2 –C 4 = , C 2 –C 4 0 ), and CO was observed as the main product.
This report summarizes the R&D activities within the U.S. Department of Energy Metal Hydride Center of Excellence (MHCoE) from March 2005 to June 2010. The purpose of the MHCoE has been to conduct highly collaborative and multi-disciplinary applied R&D to develop new reversible hydrogen storage materials that meet or exceed DOE 2010 and 2015 system goals for hydrogen storage materials. The MHCoE combines three broad areas: mechanisms and modeling (which provide a theoretically driven basis for pursuing new materials), materials development (in which new materials are synthesized and characterized) and system design and engineering (which allow these new materials to be realized as practical automotive hydrogen storage systems). This Final Report summarizes the organization and execution of the 5-year research program to develop practical hydrogen storage materials for light duty vehicles. Major results from the MHCoE are summarized, along with suggestions for future research areas.
This project, since its start in 2007—entitled “Networks of boron-doped carbon nanopores for low-pressure reversible hydrogen storage” (2007-10) and “New pathways and metrics for enhanced, reversible hydrogen storage in boron-doped carbon nanospaces” (2010-13)—is in support of the DOE's National Hydrogen Storage Project, as part of the DOE Hydrogen and Fuel Cells Program’s comprehensive efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. Hydrogen storage is widely recognized as a critical enabling technology for the successful commercialization and market acceptance of hydrogen powered vehicles. Storing sufficient hydrogen on board a wide range of vehicle platforms, at energy densities comparable to gasoline, without compromising passenger or cargo space, remains an outstanding technical challenge. Of the main three thrust areas in 2007—metal hydrides, chemical hydrogen storage, and sorption-based hydrogen storage—sorption-based storage, i.e., storage of molecular hydrogen by adsorption on high-surface-area materials (carbons, metal-organic frameworks, and other porous organic networks), has emerged as the most promising path toward achieving the 2017 DOE storage targets of 0.055 kg H2/kg system (“5.5 wt%”) and 0.040 kg H2/liter system.
This program developed new analysis methods for current and upcoming cosmological hydrogen 21cm intensity mapping data from the Tianlai experiment, located in a radio quiet area of Western China. Such mapping provides important clues to the evolution of gas and galaxies in the early universe. The experiment measured the three-dimensional large-scale structure of the universe via hydrogen emission from distant galaxies. The primary goal was to develop ways to handle the large foreground signal, which has been previously quantified in a pathfinder 21cm program conducted on NSF's Green Bank Telescope.
The 2017 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 5-9, 2017, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 263 individual activities were reviewed for VTO by 191 reviewers. Exactly 1,241 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.
The 2016 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 6-9, 2016, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 226 individual activities were reviewed for VTO, by 171 reviewers. A total of 1,044 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.
This presentation covers the role of nuclear energy in support net-zero solutions, highlighting work within the US DOE Integrated Energy Systems, Light Water Reactor Sustainability, and Hydrogen at Scale programs. The discussion will also introduce the recently-establishing Generation-IV International Forum (GIF) interim task force on non-electric applications of nuclear heat (NEaNH-iTF). This work is presented within a special invited webinar organized by the GIF Education and Training Working Group and the International Atomic Energy Agency.
The undesired formation of CH 4 during the hydrogenation of CO 2 remains a great challenge with direct impact on selectivity towards CO or CH 3 OH. In this study, the selectivity of a supported Ni catalyst prepared by traditional impregnation method was found to change after a first CO 2 hydrogenation reaction cycle from 100 to 800 °C. The usually high CH 4 formation was suppressed leading to full selectivity towards CO. This behavior was also observed after the catalyst was treated under methane or propane atmospheres at elevated temperatures. In-situ spectroscopic studies revealed that the accumulation of carbon species on the catalyst surface at high temperature leads to a nickel carbide-like phase. The catalyst regains its high selectivity to CH 4 production after carbon depletion from the surface of the Ni particles by oxidation. However, the selectivity readily shifts back towards CO formation after a new temperature programmed CO 2 hydrogenation cycle. The fraction of weakly adsorbed CO species increases on the carbide-like surface when compared to a clean nickel surface, explaining the higher selectivity towards CO formation. This easy protocol of changing the surface of a common Ni catalyst to gain selectivity represents an important step for the commercial use of CO 2 hydrogenation to CO process together with Fischer-Tropsch applications.
The goals of Office of Clean Coal are: (1) Improved energy security; (2) Reduced green house gas emissions; (3) High tech job creation; and (4) Reduced energy costs. The goals of the Hydrogen from Coal Program are: (1) Prove the feasibility of a 40% efficient, near zero emissions IGCC plant that uses membrane separation technology and other advanced technologies to reduce the cost of electricity by at least 35%; and (2) Develop H{sub 2} production and processing technologies that will contribute {approx}3% in improved efficiency and 12% reduction in cost of electricity.
Ni/α-Al 2 O 3 catalyst and a series of bimetallic catalysts including Pd–Ag, Ni–Pd, Ni–Zn, Ni–Ag, and Ni–Ga were synthesized, characterized, and tested in selective hydrogenation of acetylene to ethylene. The bimetallic catalyst Ni–Ga exhibited almost the same ethylene selectivity compared to Pd–Ag based catalyst. The effect of the Ni/Ga ratio on the catalytic activity and selectivity to ethylene in acetylene hydrogenation was evaluated. Characterization by transmission electron microscopy, X-ray diffraction, hydrogen temperature-programmed reduction, and X-ray photoelectron spectroscopy was carried out to identify active phases on Ni–Ga based catalysts, which was correlated with catalytic performance and the reaction mechanism occurring over the catalyst. Here, the presence of Ga in Ni–Ga lattice structure confined the movement of dissociated H* and reduced the adsorption binding energy of ethylene, which could prevent overhydrogenation of acetylene.
A dual metal Ni—Mo/γ-Al{sub 2}O{sub 3} catalyst was prepared by saturated impregnation and H{sub 2} reduction pretreatment on γ-Al{sub 2}O{sub 3} support with Ni as the active component and Mo as the promoter. The support and catalysts were characterized using x-ray diffraction, hydrogen temperature-programmed reduction, and scanning electron microscopy. The catalytic properties for the reaction of dibenzothiophene (DBT) were investigated in a high-pressure reactor. The hydrodesulfurization (HDS) activity was comparable with those of advanced desulfurization catalysts FHUDS-5 and FHUDS-6. The Ni—Mo catalyst had excellent dispersion characteristics on the support. Synergism between Ni and Mo was greatest at a Ni/Mo molar ratio of 2:1. The DBT conversion on Ni—Mo/γ-Al{sub 2}O{sub 3} catalyst reached 100% at a reaction temperature of 300°C, pressure of 4 MPa, and reaction time of 150 min. The Ni—Mo/γ-Al{sub 2}O{sub 3}atalyst was significantly more active than the aforementioned two commercial FHUDS catalysts for HDS of DBT.
The H2A model has provided the DOE Fuel Cell Technologies Program with a technology neutral cost calculator for: Development of cost targets for hydrogen production technologies, DOE Program assessment of progress toward goals, Researchers to compare process options
Molecular metal oxide cluster, K 5 [α-1,2-PV 2 W 10 O 40 ] (PV 2 W 10 ), was found to have intrinsic catalytic activity for the oxidative dehydrogenation of propane with high selectivity (> 80%) to propylene at low propane conversion (0.3%). Synthesis of dispersed PV 2 W 10 in non-reducible supports, γ-Al 2 O 3 and SiO 2 , was done by incipient wetness impregnation. The supported catalysts were characterized by IR, Raman spectroscopy, nitrogen adsorption, x-ray powder diffraction (PXRD), elemental analysis, hydrogen temperature-programmed reduction (H 2 –TPR), and ammonia temperature-programmed desorption (NH 3 –TPD). Catalytic testing of the supported PV 2 W 10 at equimolar cluster concentration revealed that when supported in γ-Al 2 O 3 it is more active (sevenfold increase in propane conversion) but in SiO 2 it is more selective to propylene (94%). The observed performance was due to both an increase in reducibility and higher concentration of strong acid sites for PV 2 W 10 supported in γ-Al 2 O 3 versus SiO 2 . Lastly, PV 2 W10 was shown to remain intact under reaction conditions indicating its thermal and oxidative stability.
Not Available