Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hole transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Heat pipe nuclear reactor for space power

A heat-pipe-cooled nuclear reactor has been designed to provide 3.2 MWth to an out-of-core thermionic conversion system. The reactor is a fast reactor designed to operate at a nominal heat-pipe temperature of 1675 K. Each reactor fuel element consists of a hexagonal molybdenum block which is bonded along its axis to one end of a molybdenum/lithium-vapor heat pipe. The block is perforated with an array of longitudinal holes which are loaded with UO2 pellets. The heat pipe transfers heat directly to a string of six thermionic converters which are bonded along the other end of the heat pipe. An assembly of 90 such fuel elements forms a hexagonal core. The core is surrounded by a thermal radiation shield, a thin thermal neutron absorber, and a BeO reflector containing boron-loaded control drums.

Koening, D. R.↗
NASA NTRS1982

Jet array impingement flow distributions and heat transfer characteristics. Effects of initial crossflow and nonuniform array geometry

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. The configurations considered are intended to model those of interest in current and contemplated gas turbine airfoil midchord cooling applications. The effects of an initial crossflow which approaches the array through an upstream extension of the channel are considered. Flow distributions as well as heat transfer coefficients and adiabatic wall temperatures resolved to one streamwise hole spacing were measured as a function of the initial crossflow rate and temperature relative to the jet flow rate and temperature. Both Nusselt number profiles and dimensionless adiabatic wall temperature (effectiveness) profiles are presented and discussed. Special test results which show a significant reduction of jet orifice discharge coefficients owing to the effect of a confined crossflow are also presented, along with a flow distribution model which incorporates those effects. A nonuniform array flow distribution model is developed and validated.

Florschuetz, L. W.↗
NASA NTRS2011

Low-Frequency Gravitational-Wave Science with eLISA/ NGO

We review the expected science performance of the New Gravitational-Wave Observatory (NGO, a.k.a. eLISA), a mission under study by the European Space Agency for launch in the early 2020s. eLISA will survey the low-frequency gravitational-wave sky (from 0.1 mHz to 1 Hz), detecting and characterizing a broad variety of systems and events throughout the Universe, including the coalescences of massive black holes brought together by galaxy mergers; the inspirals of stellar-mass black holes and compact stars into central galactic black holes; several millions of ultracompact binaries, both detached and mass transferring, in the Galaxy; and possibly unforeseen sources such as the relic gravitational-wave radiation from the early Universe. eLISA's high signal-to-noise measurements will provide new insight into the structure and history of the Universe, and they will test general relativity in its strong-field dynamical regime.

Amaro-Seoane, Pau↗
NASA NTRS2013

Wireline Deep Drill for the Exploration of Icy Bodies

One of the most pressing current questions in space science is whether life has ever arisen anywhere else in the universe. Water is a critical prerequisite for all life-as-we-know-it, thus the possible exploration targets for extraterrestrial life are bodies that have or had copious liquid: Mars, Europa, and Enceladus. Due to the oxidizing nature of Mars' surface, as well as subsurface liquid water reservoirs present on Europa and Enceladus, the search for evidence of existing life must likely focus on subsurface locations, at depths sufficient to support liquid water or retain biologic signatures. To address these questions, an Auto-Gopher sampler has been developed that is a wireline type drill. This drill is suspended on a tether and its motors and mechanisms are built into a tube that ends with a coring bit. The tether provides the mechanical connection to a rover/lander on a surface as well as power and data communication. Upon penetrating to a target depth, the drill is retracted from the borehole, the core is deposited into a sample transfer system, and the drill is lowered back into the hole. Wireline operation sidesteps one of the major drawbacks of traditional continuous drill string systems by obviating the need for multiple drill sections, which add significantly to the mass and the complexity of the system (i.e. penetration rate was 40 cm per hour). Drilling to 2 meter depth and recovering of cores every 10 cm took a total time of 15 hours (a single step of drilling 10 cm and retrieving the core was 45 minutes). Total energy to reach the 2 m depth was 500 Whr. The Weight on Bit was limited to less than 70 Newton. The core recovery was 100%.

sampling↗
DOE OSTI2023

Earth Mover’s Distance as a Metric to Evaluate the Extent of Charge Transfer in Excitations Using Discretized Real-Space Densities

This paper presents a novel theoretical measure, μ EMD , based on the earth mover's distance (EMD), for quantifying the density shift caused by electronic excitations in molecules. As input, the EMD metric uses only the discretized ground- and excited-state electron densities in real space, rendering it compatible with almost all electronic structure methods used to calculate excited states. The EMD metric is compared against other popular theoretical metrics for describing the extent of electron-hole separation in a wide range of excited states (valence, Rydberg, charge transfer, etc.). Further, the results showcase the EMD metric's effectiveness across all excitation types and suggest that it is useful as an additional tool to characterize electronic excitations. The study also reveals that μ EMD can function as a promising diagnostic tool for predicting the failure of pure exchange-correlation functionals. Specifically, we show statistical relationships among the functional-driven errors, the exact exchange content within the functional, and the magnitude of μ EMD values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2000

Experimental Heat Transfer and Bulk Air Temperature Measurements for a Multipass Internal Cooling Model with Ribs and Bleed

An experimental study was made to obtain heat transfer and air temperature data for a simple 3-leg serpentine test section that simulates a turbine blade internal cooling passage with trip strips and bleed holes. The objectives were to investigate the interaction of ribs and various bleed conditions on internal cooling and to gain a better understanding of bulk air temperature in an internal passage. Steady state heat transfer measurements were obtained using a transient technique with thermochromic liquid crystals. Trip strips were attached to one wall of the test section and were located either between or near the bleed holes. The bleed holes, used for film cooling, were metered to simulate the effect of external pressure on the turbine blade. Heat transfer enhancement was found to be greater for ribs near bleed holes compared to ribs between holes, and both configurations were affected slightly by bleed rates upstream. Air temperature measurements were taken at discreet locations along one leg of the model. Average bulk air temperatures were found to remain fairly constant along one leg of the model.

Thurman, Douglas↗
NASA NTRS1992

Shear joint capability versus bolt clearance

The results of a conservative analysis approach into the determination of shear joint strength capability for typical space-flight hardware as a function of the bolt-hole clearance specified in the design are presented. These joints are comprised of high-strength steel fasteners and abutments constructed of aluminum alloys familiar to the aerospace industry. A general analytical expression was first arrived at which relates bolt-hole clearance to the bolt shear load required to place all joint fasteners into a shear transferring position. Extension of this work allowed the analytical development of joint load capability as a function of the number of fasteners, shear strength of the bolt, bolt-hole clearance, and the desired factor of safety. Analysis results clearly indicate that a typical space-flight hardware joint can withstand significant loading when less than ideal bolt hole clearances are used in the design.

Lee, H. M.↗
NASA NTRS2001

Experimental Heat Transfer and Bulk Air Temperature Measurements for a Multipass Internal Cooling Model with Ribs and Bleed

An experimental study was made to obtain heat transfer and air temperature data for a simple three-leg serpentine test section that simulates a turbine blade internal cooling passage with trip strips and bleed holes. The objectives were to investigate the interaction of ribs and various bleed conditions on internal cooling and to gain a better understanding of bulk air temperature in an internal passage. Steady-state heat transfer measurements were obtained using a transient technique with thermochromic liquid crystals. Trip strips were attached to one wall of the test section and were located either between or near the bleed holes. The bleed holes, used for film cooling, were metered to simulate the effect of external pressure on the turbine blade. Heat transfer enhancement was found to be greater for ribs near bleed holes compared to ribs between holes, and both configurations were affected slightly by bleed rates upstream. Air temperature measurements were taken at discrete locations along one leg of the model. Average bulk air temperatures were found to remain fairly constant along one leg of the model.

Thurman, Douglas↗
DOE OSTI2022

FEMTOSECOND LASER DRILLING OF SILICON NITRIDE

Ceramics are employed in various engineering applications including electronics, semiconductors, automotive and aerospace industry, among others. Ceramics are desirable materials due to their high hardness, thermal resistance, chemical, thermal, and mechanical properties. A drawback of engineering ceramics is the manufacturing process. Ceramics are hard and brittle and conventional drilling or cutting methods can damage the material. These challenges in manufacturing have limited the application of ceramics in certain engineering applications. The non-contact machining of ceramics through ultrashort pulsed laser drilling offers a possible solution to the manufacturing issues. The advantage of laser drilling is the ability to machine hard and brittle materials. A laser, pulsed in the time regime of femtoseconds (fs), drills/machines sharp and well-defined holes and cuts. Additionally, the short pulse width results in limited melting, cracking, or heat transfer to the surrounding material, as well as no residual stresses. This non-contact process can greatly aid in the machining of hard materials. This study focuses on drilling into silicon nitride to produce zero-taper through holes. With this, other thicknesses can be explored, to achieve zero-taper holes.

Femtosecond laser ablation, Ceramics, Silicon Nitr↗
DOE OSTI2026

Accurate determination of chemical abundances near a supermassive black hole

The metal abundances in galactic nuclei carry key information on the history of star formation and mass transfer in central regions of galaxies. X-ray fluorescence analysis is a unique tool to reliably measure the abundances of various elements via simple physics. Here we present a new observation of the active nucleus in the Circinus galaxy with the XRISM satellite at unprecedented X-ray energy resolution. The fluorescent iron Kα line profile modified by Compton scattering indicates that the material responsible for its emission is cold and metal rich and is located ≳0.024 pc from the supermassive black hole, consistent with the dusty torus region. The abundance pattern derived from comparing fluorescent line intensities of different metals shows subsolar ratios of argon- and calcium-to-iron and a supersolar ratio of nickel-to-iron. This abundance pattern is best produced by a combination in number fraction of 92$^{+2}_{–4}$% core-collapse supernovae from progenitor stars less massive than 20$^{+3}_{–2}$ M ⊙ and 8$^{+4}_{–2}$% type Ia supernovae. This suggests that gas feeding the supermassive black hole was enriched by recent core-collapse supernovae. Our findings imply that in metal-rich environments stars more massive than about 20 M ⊙ directly collapse into black holes or make faint supernovae without ejecting heavy metals into the space.

Astronomy and AstroPhysics↗
DOE OSTI2021

Black Holes and Other Clues to the Quantum Structure of Gravity

Bringing gravity into a quantum-mechanical framework is likely the most profound remaining problem in fundamental physics. The “unitarity crisis” for black hole evolution appears to be a key facet of this problem, whose resolution will provide important clues. Investigating this raises the important structural question of how to think about subsystems and localization of information in quantum gravity. Paralleling field theory, the answer to this is expected to be an important ingredient in the mathematical structure of the theory. Perturbative gravity results indicate a structure different from that of quantum field theory, but suggest an avenue to defining subsystems. If black holes do behave similarly to familiar subsystems, unitarity demands new interactions that transfer entanglement from them. Such interactions can be parameterized in an effective approach, without directly addressing the question of the fundamental dynamics, whether that is associated with quantum spacetime, wormholes, or something else. Since such interactions need to extend outside the horizon, that raises the question of whether they can be constrained, or might be observed, by new electromagnetic or gravitational wave observations of strong gravity regions. This note overviews and provides connections between these developments.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2008

High-Power Piezoelectric Acoustic-Electric Power Feedthru for Metal Walls

Piezoelectric acoustic-electric power feed-through devices transfer electric power wirelessly through a solid wall by using acoustic waves. This approach allows for the removal of holes through structures. The technology is applicable to power supply for electric equipment inside sealed containers, vacuum or pressure vessels, etc where the holes on the wall are prohibitive or result in significant performance degrade or complex designs. In the author's previous work, 100-W electric power was transferred through a metal wall by a small, simple-structure piezoelectric device. To meet requirements of higher power applications, the feasibility to transfer kilowatts level power was investigated. Pre-stressed longitudinal piezoelectric feedthru devices were analyzed by finite element model. An equivalent circuit model was developed to predict the power transfer characteristics to different electric loads. Based on the analysis results, a prototype device was designed, fabricated and a demonstration of the transmission of electric power up to 1-kW was successfully conducted. The methods to minimize the plate wave excitation on the wall were also analyzed. Both model analysis and experimental results are presented in detail in this presentation.

acoustic wave↗
DOE OSTI2023

Production of zirconium-88 via proton irradiation of metallic yttrium and preparation of target for neutron transmission measurements at DICER

Abstract A process for the production of tens to hundreds of GBq amounts of zirconium-88 ( 88 Zr) using proton beams on yttrium was developed. For this purpose, yttrium metal targets (≈20 g) were irradiated in a ~16 to 34 MeV proton beam at a beam current of 100–200 µA at the Los Alamos Isotope Production Facility (IPF). The 88 Zr radionuclide was produced and separated from the yttrium targets using hydroxamate resin with an elution yield of 94(5)% (1σ). Liquid DCl solution in D 2 O was selected as a suitable 88 Zr sample matrix due to the high neutron transmission of deuterium compared to hydrogen and an even distribution of 88 Zr in the sample matrix. The separated 88 Zr was dissolved in DCl and 8 µL of the obtained solution was transferred to a tungsten sample can with a 1.2 mm diameter hole using a syringe and automated filling station inside a hot cell. Neutron transmission of the obtained 88 Zr sample was measured at the Device for Indirect Capture Experiments on Radionuclides (DICER).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Probing ferroelectricity by x-ray absorption spectroscopy in molecular crystals

We carry out x-ray absorption spectroscopy experiment at the oxygen $K$ edge in croconic acid (C 5 H 2 O 5 ) crystal as a prototype of ferroelectric organic molecular solid, whose electric polarization is generated by proton transfer. The experimental spectrum is well reproduced by the electron-hole excitation theory simulations from configuration generated by ab initio molecular dynamics simulation. When inversion symmetry is broken in the ferroelectric state, the hydrogen bonding environment on the two bonded molecules become inequivalent. Such a difference is sensitively probed by the bound excitation in the pre-edge, which is strongly localized on the excited molecules. Our analysis shows that a satellite peak in the pre-edge will emerge at higher excitation energy, which serves as a clear signature of ferroelectricity in the material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lone Pairs of Carbogenic Center Enable Thermally Activated Delayed Fluorescence from Carbon to Ligand Charge Transfer Excited States

Carbogenic compounds of the type L→C(0)←L, where L represents various ligands such as phosphines or carbenes, and C(0) denotes zerovalent carbon with two orthogonal lone pairs, are widely utilized in organic and coordination chemistry; however, in-depth photophysical and optical properties remain largely unknown. In the following work, we report detailed luminescent properties of one of the most prominent examples of carbogenic compounds, hexaphenylcarbodiphosphorane (CDP). Combined spectroscopic/TD-DFT studies demonstrate that both lone pairs of CDP participate in the observed visible light absorption and emission, which are associated with carbon lone pairs π*(PPh3) carbon to ligand charge transfer states (CLCTs). The CLCT exhibits a considerably decoupled electron-hole pair, resulting in a small S1-T1 gap and thermally assisted delayed fluorescence (TADF). Moreover, two lone pairs teamed up around C(0) provide numerous close-lying σ- and π-CLCT singlet and triplet states, which allow, for organic TADF emitters, extremely fast rates of exergonic intersystem crossing up to 1.27×109 s-1, competitive with some 3d and 4d metal-based TADF luminophores. These results open fresh directions for innovative design of novel luminescent materials for high-end photonic applications, utilizing lone pairs of carbogenic centers as donors of electron density in the excited states.

Mrózek, Ondřej [University of Southern California]↗
NASA NTRS1981

Development of an orthotropic hole element

A finite element was developed which adequately represents the state of stress in the region around a circular hole in orthotropic material experiencing reasonably general loading. This was achieved with a complementary virtual work formulation of the stiffness and stress matrices for a square element with center circular hole. The assumed stress state provides zero shearing stress on the hole boundary, so the element is suitable for problems involving load transfer without friction. The element has been implemented in the NASTRAN computer program, and sample problem results are presented.

Smith, C. V.↗
NASA NTRS1989

Thermal instability accretion disk model for the X-ray transient A0620-00

The limit-cycle thermal instability model for accretion disks is used to study the soft X-ray transient A0620-00. Thermal instability in geometrically thin, Keplerian alpha-model disks is reviewed. The observational constraints on A0620-00 are presented and the parameters chosen for the model are discussed. It is found that, with the adopted parameters, the model requires a central object mass of about 7 solar masses to fit the burst recurrence time. This is consistent with a black hole as the central object. The results suggest that a mass transfer instability may be responsible for outbursts.

Huang, Min↗
NASA NTRS1995

Acceleration of solar wind in polar coronal holes by induction heating

The universal induction heating mechanism supplying with the energy all the processes of coronal heating and the solar wind acceleration is developed. The observed relative 'trembling' of photospheric super-large scale magnetic fields with quasi-periods of 1-4 days amounts 30-40 percent in amplitude. The inductive electric field appears in the corona. The electric currents cause the Joule dissipation. The uneven heating leads to the solar wind acceleration. A model is suggested in which high-speed streams in space are caused by the combination of the enhanced inductive energy flux from the solar coronal active regions; the work against the regular magnetic field; losses from coronal emission. The consideration is made in terms of the dissipative solar wind theory with the finite electrical conductivity of plasma. The leakage of plasma and the energy flux across the magnetic field, caused by the induction heating processes, are taken into account. The polar coronal holes (and the mid-latitude ones) are indicators of energy transfer balance but not direct sources of high-speed streams in the solar wind.

Chertkov, A. D.↗