Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high-dimensional problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

231 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dynamics of qudit gates and effects of spectator modes on optimal control pulses

Qudit gates for high-dimensional quantum computing can be synthesized with high precision using numerical quantum optimal control techniques. Large circuits are broken down into modules and the tailored pulses for each module can be used as primitives for a qudit compiler. Application of the pulses of each module in the presence of extra modes may decrease their effectiveness due to crosstalk. In this paper, we address this problem by simulating qudit dynamics for circuit quantum electrodynamics systems. As a test case, we take pulses for single-qudit swap gates optimized in isolation and then apply them in the presence of spectator modes each of which are in Fock states. We provide an experimentally relevant scaling formula that can be used as a bound on the fidelity decay. Our results show that frequency shift from spectator mode populations has to be ≲ 0.1 % of the qudit's nonlinearity in order for high-fidelity single-qudit gates to be useful in the presence of occupied spectator modes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

High-dimensional maximum-entropy phase space tomography using normalizing flows

Particle accelerators generate charged-particle beams with tailored distributions in six-dimensional position-momentum space (phase space). Knowledge of the phase space distribution enables model-based beam optimization and control. In the absence of direct measurements, the distribution must be tomographically reconstructed from its projections. In this paper, we highlight that such problems can be severely underdetermined and that entropy maximization is the most conservative solution strategy. We leverage —invertible generative models—to extend maximum-entropy tomography to six-dimensional phase space and perform numerical experiments to validate the model's performance. Our numerical experiments demonstrate consistency with exact two-dimensional maximum-entropy solutions and the ability to fit complicated six-dimensional distributions to large measurement sets in reasonable time. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Efficient graph representation framework for chemical molecule similarity tasks

Graph data has emerged in numerous scientific domains and machine learning techniques have been widely used for analysis and learning of diverse data for prediction and decision. Machine learning techniques can readily address complex problems by leveraging their structural information. But graphs cannot be directly used for existing machine learning algorithms unless encoded as vectors. The problem of efficient representation of graphs is a substantial challenge in graph machine learning. In this paper, we propose a novel two-stage framework for the representation of chemical molecule graphs based on the strengths of Graph Isomorphism Networks (GINs) and Siamese autoencoders. In the first stage, the GIN model is constructed and trained using the structural information of chemical molecule graphs. Node attributes, edge attributes, and edge indices are used as input data, while graph attributes are used as labels. The GIN model effectively captures the structural characteristics of graphs and can accurately predict graph attributes, i.e., molecular properties. It also generates Graph Embeddings, represented as vectors that encode the structural information of graphs. In the second stage, Graph Embedding vectors are further optimized for downstream similarity tasks while preserving the graph structural information. The Siamese autoencoder is constructed and trained, which reduces the dimensionality of the Graph Embedding vectors, while maximizing the preservation of structural information in the original high-dimensional vectors. The resulting low-dimensional Graph Embeddings can be effectively utilized for tasks such as approximate nearest neighbor search. The experimental results demonstrate the effectiveness of our proposed framework in accurately predicting graph similarity.

Ma, Jiaji↗
DOE OSTI2025

Safe and Robust Binary Classification and Fault Detection Using Reinforcement Learning

In this paper, we propose a learning-based method utilizing the Soft Actor-Critic (SAC) algorithm to train a binary Support Vector Machine (SVM) classifier. This classifier is designed to identify valid input spaces in high-dimensional, highly constrained systems while minimizing the total runtime of offline simulations. The simulations adapt their runtime based on the likelihood that a given training input will be informative to the classifier. Furthermore, we introduce a method for using the trained SAC model to predict whether a desired system input is likely to violate constraints, along with a technique to adjust the input as necessary. Additionally, we explore the potential of this model to detect faults or adversarial attacks within the system. The effectiveness of our approach is demonstrated through various simulations of challenging classification problems and a constrained quadrotor model.

Netter, Josh [Georgia Institute of Technology, Atl↗
DOE OSTI2021

Deep Cellular Recurrent Network for Efficient Analysis of Time-Series Data With Spatial Information

Efficient processing of large-scale time series data is an intricate problem in machine learning. Conventional sensor signal processing pipelines with hand engineered feature extraction often involve huge computational cost with high dimensional data. Deep recurrent neural networks have shown promise in automated feature learning for improved time-series processing. However, generic deep recurrent models grow in scale and depth with increased complexity of the data. This is particularly challenging in presence of high dimensional data with temporal and spatial characteristics. Consequently, this work proposes a novel deep cellular recurrent neural network (DCRNN) architecture to efficiently process complex multi-dimensional time series data with spatial information. Here, the cellular recurrent architecture in the proposed model allows for location-aware synchronous processing of time series data from spatially distributed sensor signal sources. Extensive trainable parameter sharing due to cellularity in the proposed architecture ensures efficiency in the use of recurrent processing units with high-dimensional inputs. This study also investigates the versatility of the proposed DCRNN model for classification of multi-class time series data from different application domains. Consequently, the proposed DCRNN architecture is evaluated using two time-series datasets: a multichannel scalp EEG dataset for seizure detection, and a machine fault detection dataset obtained in-house. The results suggest that the proposed architecture achieves state-of-the-art performance while utilizing substantially less trainable parameters when compared to comparable methods in the literature.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Data-Efficient Dimensionality Reduction and Surrogate Modeling of High-Dimensional Stress Fields

Tensor datatypes representing field variables like stress, displacement, velocity, etc., have increasingly become a common occurrence in data-driven modeling and analysis of simulations. Numerous methods [such as convolutional neural networks (CNNs)] exist to address the meta-modeling of field data from simulations. As the complexity of the simulation increases, so does the cost of acquisition, leading to limited data scenarios. Modeling of tensor datatypes under limited data scenarios remains a hindrance for engineering applications. Here, in this article, we introduce a direct image-to-image modeling framework of convolutional autoencoders enhanced by information bottleneck loss function to tackle the tensor data types with limited data. The information bottleneck method penalizes the nuisance information in the latent space while maximizing relevant information making it robust for limited data scenarios. The entire neural network framework is further combined with robust hyperparameter optimization. We perform numerical studies to compare the predictive performance of the proposed method with a dimensionality reduction-based surrogate modeling framework on a representative linear elastic ellipsoidal void problem with uniaxial loading. The data structure focuses on the low-data regime (fewer than 100 data points) and includes the parameterized geometry of the ellipsoidal void as the input and the predicted stress field as the output. The results of the numerical studies show that the information bottleneck approach yields improved overall accuracy and more precise prediction of the extremes of the stress field. Additionally, an in-depth analysis is carried out to elucidate the information compression behavior of the proposed framework.

artificial intelligence↗
DOE OSTI2025

Bias-Variance Trade-Off in Physics-Informed Neural Networks with Randomized Smoothing for High-Dimensional PDEs

Physics-Informed Neural Networks (PINNs) have triggered a paradigm shift in scientific computing, leveraging mesh-free properties and robust approximation capabilities. While proving effective for low-dimensional partial differential equations (PDEs), the computational cost of PINNs remains a hurdle in high-dimensional scenarios. This is particularly pronounced when computing high-order and high-dimensional derivatives in the physics-informed loss. Randomized Smoothing PINN (RS-PINN) introduces Gaussian noise for stochastic smoothing of the original neural net model, enabling the use of Monte Carlo methods for derivative approximation, which eliminates the need for costly automatic differentiation. Despite its computational efficiency, especially in the approximation of high-dimensional derivatives, RS-PINN introduces biases in both loss and gradients, negatively impacting convergence, especially when coupled with stochastic gradient descent (SGD) algorithms. We present a comprehensive analysis of biases in RS-PINN, attributing them to the nonlinearity of the Mean Squared Error (MSE) loss as well as the intrinsic nonlinearity of the PDE itself. We propose tailored bias correction techniques, delineating their application based on the order of PDE nonlinearity. The derivation of an unbiased RS-PINN allows for a detailed examination of its advantages and disadvantages compared to the biased version. Specifically, the biased version has a lower variance and runs faster than the unbiased version, but it is less accurate due to the bias. To optimize the bias-variance trade-off, we combine the two approaches in a hybrid method that balances the rapid convergence of the biased version with the high accuracy of the unbiased version. In addition to methodological contributions, we present an enhanced implementation of RS-PINN. Extensive experiments on diverse high-dimensional PDEs, including Fokker-Planck, Hamilton-Jacobi-Bellman (HJB), viscous Burgers’, Allen-Cahn, and Sine-Gordon equations, illustrate the bias-variance trade-off and highlight the effectiveness of the hybrid RS-PINN. Empirical guidelines are provided for selecting biased, unbiased, or hybrid versions, depending on the dimensionality and nonlinearity of the specific PDE problem.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

A Linear-Complexity Tensor Butterfly Algorithm for Compressing High-Dimensional Oscillatory Integral Operators

This paper presents a multilevel tensor compression algorithm called tensor butterfly algorithm for efficiently representing large-scale and high-dimensional oscillatory integral operators, including Green's functions for wave equations and integral transforms such as Radon transforms and Fourier transforms. The proposed algorithm leverages a tensor extension of the so-called complementary low-rank property of existing matrix butterfly algorithms. The algorithm partitions the discretized integral operator tensor into subtensors of multiple levels and factorizes each subtensor at the middle level as a Tucker-type interpolative decomposition, whose factor matrices are formed in a multilevel fashion. For a d-dimensional (d > 1) integral operator discretized into a 2d-mode tensor with n2d entries, the overall CPU time and memory requirement scale as O(nd), in stark contrast to the O(nd log n) complexity of existing matrix algorithms such as matrix butterfly algorithms and fast Fourier transforms (FFTs), where n is the number of points per direction. When comparing with other tensor algorithms such as quantized tensor train (QTT), the proposed algorithm also shows superior CPU and memory performance for tensor contraction. Remarkably, the tensor butterfly algorithm can efficiently model high-frequency Green's function interactions between two unit cubes, each spanning 512 wavelengths per direction, which represents problems of scale over 512× larger than that existing butterfly algorithms can handle, with the same amount of computation resources. On the other hand, for a problem representing 64 wavelengths per direction, which is the largest size existing algebraic matrix algorithms can handle, our tensor butterfly algorithm exhibits 200x speedups and 30× memory reduction compared with existing ones. Moreover, the tensor butterfly algorithm also permits O(nd)-complexity FFTs and Radon transforms up to d = 6 dimensions.

Kielstra, P Michael↗
DOE OSTI2021

Learning Forecasts of Rare Stratospheric Transitions from Short Simulations

Abstract Rare events arising in nonlinear atmospheric dynamics remain hard to predict and attribute. We address the problem of forecasting rare events in a prototypical example, sudden stratospheric warmings (SSWs). Approximately once every other winter, the boreal stratospheric polar vortex rapidly breaks down, shifting midlatitude surface weather patterns for months. We focus on two key quantities of interest: the probability of an SSW occurring, and the expected lead time if it does occur, as functions of initial condition. These optimal forecasts concretely measure the event’s progress. Direct numerical simulation can estimate them in principle but is prohibitively expensive in practice: each rare event requires a long integration to observe, and the cost of each integration grows with model complexity. We describe an alternative approach using integrations that are short compared to the time scale of the warming event. We compute the probability and lead time efficiently by solving equations involving the transition operator, which encodes all information about the dynamics. We relate these optimal forecasts to a small number of interpretable physical variables, suggesting optimal measurements for forecasting. We illustrate the methodology on a prototype SSW model developed by Holton and Mass and modified by stochastic forcing. While highly idealized, this model captures the essential nonlinear dynamics of SSWs and exhibits the key forecasting challenge: the dramatic separation in time scales between a single event and the return time between successive events. Our methodology is designed to fully exploit high-dimensional data from models and observations, and has the potential to identify detailed predictors of many complex rare events in meteorology.

Finkel, Justin↗
DOE OSTI2023

Spatio-Temporal Surrogates for Interaction of a Jet with High Explosives: Part II - Clustering Extremely High-Dimensional Grid-Based Data

Building an accurate surrogate model for the spatio-temporal outputs of a computer simulation is a challenging task. A simple approach to improve the accuracy of the surrogate is to cluster the outputs based on similarity and build a separate surrogate model for each cluster. This clustering is relatively straightforward when the output at each time step is of moderate size. However, when the spatial domain is represented by a large number of grid points, numbering in the millions, the clustering of the data becomes more challenging. In this report, we consider output data from simulations of a jet interacting with high explosives. These data are available on spatial domains of different sizes, at grid points that vary in their spatial coordinates, and in a format that distributes the output across multiple files at each time step of the simulation. We first describe how we bring these data into a consistent format prior to clustering. Borrowing the idea of random projections from data mining, we reduce the dimension of our data by a factor of thousand, making it possible to use the iterative k-means method for clustering. We show how we can use the randomness of both the random projections, and the choice of initial centroids in k-means clustering, to determine the number of clusters in our data set. Our approach makes clustering of extremely high dimensional data tractable, generating meaningful cluster assignments for our problem, despite the approximation introduced in the random projections.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Adaptive Discovery and Mixed-Variable Optimization of Next Generation Synthesizable Microelectronic Materials

Design of new microelectronic materials is characterized by several challenges such as high-dimensionality of the atomic structure-composition variable space, formidable cost of directly using high-fidelity simulations for design optimization, dispersity in literature-reported similar materials and synthesis methods, complex physical mechanisms, and mixed qualitative and quantitative design variables that lead to a disjointed design space. Even though machine learning (ML) techniques have been employed to expedite materials innovation, existing methods treat ML and design optimization as two separate processes, failing to resolve the fundamental challenges associated with high dimensionality and mixed-variable complexity. We have developed a ML enhanced mixed-variable material design optimization framework to efficiently extract useful information from existing data in literature and physics-based simulations to guide the autonomous search for optimal materials. Our proposed framework is composed of four computational modules: (1) a natural language processing (NLP) based virtual screening module, (2) classification based concept exploration module, (3) a density functional theory (DFT)-based high-fidelity evaluation model, and (4) a novel latent-variable Gaussian process (LVGP) ML model for mixed-variable problems with uncertainty quantification, which seamlessly integrates with Bayesian Optimization (BO) and achieves superb efficiency through embedded physics-based dimension reduction. Our approach is demonstrated and validated using the testbed of functional materials exhibiting metal-insulation transitions (MITs), with the targeted reversible resistivity changes (∼10^5) near room temperature. At the end of the 30-month project, we have developed a series of new ML techniques using NLP, conditional variational autoencoders, active learning, latent-variable Gaussian processes, integrated with Bayesian optimization. Our project has resulted in new predicted MITs compounds and improved understanding of MITs microscopic mechanisms, which in turn will revolutionize microelectronics science to provide energy-saving solutions. Our research has improved both creativity and efficiency in transforming rare-event discoveries of new functional materials to persistent innovations. In addition to open-sourcing the online MIT database and the classification model, the LVGP open source code has been downloaded more than 15,000 times within two years. More than 40 MIT compounds have been identified and many have been pursued experimentally via collaborators. The research results are published in close to 20 collaborative papers in high-impact journals, such as Chem. Mater., Appl. Phys. Rev., Sci. Rep., among others of design space.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Dimensional Reduction for Sampled Priors and Application to Photometric Redshift Distributions

A typical Bayesian inference on the values of some parameters of interest q from some data D involves running a Markov Chain (MC) to sample from the posterior $p$($q$,$n$|$D$) $\propto$ $\mathcal{L}$($D$|$q$,$n$)$p$(q)$p$($n$), where n are some nuisance parameters with a separable prior. In some cases, the nuisance parameters are high-dimensional, and their prior p(n) is itself defined only by a set of samples that have been drawn from some other MC. The MC for the posterior will typically require evaluation of p(n) at arbitrary values of n, i.e., one needs to provide a density estimator over the full n space from the provided samples. But the high dimensionality of n hinders both the density estimation and the efficiency of the MC for the posterior. We describe a solution to this problem: a linear compression of the n space into a much lower-dimensional space u, which projects away directions in n space that cannot appreciably alter $\mathcal{L}$. The algorithm for doing so is a slight modification to principal components analysis, and is less restrictive on p(n) than other proposed solutions to this issue. We demonstrate this “mode projection” technique using the analysis of 2-point correlation functions of weak lensing fields and galaxy density in the Dark Energy Survey, where n is a binned representation of the redshift distribution n(z) of the galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A Nonlocal-Gradient Descent Method for Inverse Design in Nanophotonics

Local-gradient-based optimization approaches lack nonlocal exploration abilityrequired for escaping from local minima when searching non-convex landscapes.A directional Gaussian smoothing (DGS) approach was recently proposed in [29]and used to define a truly nonlocal gradient, referred to as the DGS gradient, inorder to enable nonlocal exploration in high-dimensional black-box optimization.Promising results show that replacing the traditional local gradient with the nonlocalDGS gradient can significantly improve the performance of gradient-based methodsin optimizing highly multi-modal loss functions. However, the current DGS methodis designed for unbounded and uncontrained optimization problems, making itinapplicable to real-world engineering optimization problems where the tuningparameters are often bounded and the loss function is usually constrained byphysical processes. In this work, we propose to extend to the DGS approachto the constrained inverse design framework in order to find better optima ofmulti-modal loss functions. A series of adaptive strategies for smoothing radiusand learning rate updating are developed to improve the computational efficiencyand robustness. Our methodology is demonstrated by an example of designing ananoscale wavelength demultiplexer, and shows superior performance compared tothe state-of-the-art approaches. By incorporating volume constraints, the optimizeddesign achieves an equivalently high performance but significantly reduces theamount of material usage.

Bi, Sirui↗
DOE OSTI2024

Predicting Drug Effects from High-dimensional Asymmetric Drug Data Sets using Graph Neural Networks: A Comprehensive Analysis of Multi-target Drug Effect Prediction

Graph neural networks (GNNs) have emerged as one of the most effective Machine learning (ML) techniques for drug effect prediction from drug molecular graphs. Despite having immense potential, GNN models lack performance when using data sets that contain high dimensional asymmetrically co-occurrent drug effects as targets with complex correlations between them. Training individual learning models for each drug effect and incorporating every prediction result for a wide spectrum of drug effects is beyond practicality. Such an implication provides a testbed to address this challenge as multi-target prediction problems, aiming to predict all drug effects at a time. We develop standard and hybrid graph neural networks (GNNs)to perform two separate tasks that are multi-regression for continuous values and multi-label classification for categorical values contained in our data sets. Since this step makes the target data even more sparse and introduces asymmetric label co-occurrence, the learning of multi-label classification models becomes difficult and heavily impacts the GNN's performance. To address these challenges, we propose a new data oversampling technique to improve multi-label classification performances on all the given imbalanced molecular graph data sets. Using the technique, we improve the data imbalance ratio of the drug effects better than before while protecting the data set's integrity. Finally, we evaluate multi-label classification performance using the best-performant hybrid GNN model on all the oversampled data sets obtained from the proposed oversampling technique. These results outperform those of other ML models including GNN models when they are trained on the original data sets or oversampled data sets using MLSMOTE (a well-known oversampling technique) in all evaluation metrics precision, recall, and F1 score by a significant margin.

Bose, Avishek [ORNL]↗
DOE OSTI2026

HDSense: An efficient method for ranking observable sensitivity

Identifying which observables most effectively constrain model parameters can be computationally prohibitive when considering full likelihoods of many correlated observables. This is especially important for, e.g., hadronization models, where high precision is required to interpret the results of collider experiments. We introduce the High-Dimensional Sensitivity (HDSense) score, a computationally efficient metric for ranking observable sets using only one-dimensional histograms. Derived by profiling over unknown correlations in the Fisher information framework, the score balances total information content against redundancy between observables. We apply HDSense to rank a set observables in terms of their constraining power with respect to five parameters of the Lund string model of hadronization implemented in Pythia using simulated leptonic collider events at the $Z$ pole. Validation against machine-learning--based full-likelihood approximations demonstrates that HDSense successfully identifies near-optimal observable subsets. The framework naturally handles data from multiple experiments with different acceptances and incorporates detector effects. While demonstrated on hadronization models, the methodology applies broadly to generic parameter estimation problems where correlations are unknown or difficult to model.

Assi, Benoît [Cincinnati U.] (ORCID:00000003092433↗