Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high resolution microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Precipitation in a Cu–Cr–Zr–Mg alloy during aging

The precipitation processes in a Cu-0.69Cr-0.10Zr-0.02Mg alloy aged at 450 °C and 550 °C have been investigated by transmission electron microscopy and high resolution transmission electron microscopy. The precipitation sequence in this alloy aged at 450 °C is: supersaturated solid solution → Guinier–Preston zone (fcc Cr-rich phase) → ordered fcc Cr-rich phase → ordered bcc Cr-rich phase. The precipitation sequence in this alloy aged at 550 °C is: supersaturated solid solution → ordered fcc Cr-rich phase → ordered bcc Cr-rich phase. In the evolution of decomposition, the orientation relationship between the precipitates and the Cu matrix changes from cube-on-cube to Nishiyama–Wassermann orientation. The ordering of Cr-rich precipitates facilitates the formation of the bcc precipitates and promotes the development of Nishiyama–Wassermann orientation. - Highlights: • Two different precipitation sequences in the Cu–Cr–Zr–Mg alloy are proposed. • The changes in orientation relationship of the precipitates are presented. • The roles of ordering and coherent interface of the precipitates are discussed.

36 MATERIALS SCIENCE↗

Silver nanocrystals of various morphologies deposited on silicon wafer and their applications in ultrasensitive surface-enhanced Raman scattering

Silver nanostructures with dendritic, flower-like and irregular morphologies were controllably deposited on a silicon substrate in an aqueous hydrogen fluoride solution at room temperature. The morphology of the Ag nanostructures changed from dendritic to urchin-like, flowerlike and pinecone-like with increasing the concentration of polyvinyl pyrrolidone (MW = 55,000) from 2 to 10 mM. The Ag nanostructures were characterized by transmission electron microscopy, high-resolution transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray, and X-ray diffraction. Through a series of time-dependent morphological evolution studies, the growth processes of Ag nanostructures have been systematically investigated and the corresponding growth mechanisms have been discussed. In addition, the morphology-dependent surface-enhanced Raman scattering of as-synthesized Ag nanostructures were investigated. The results indicated that flower-like Ag nanostructure had the highest activity than the other Ag nanostructures for Rhodamine 6G probe molecules. Highlights: • A simple method was developed to prepare dendritic and flower-like Ag nanostructures. • The flower-like Ag nanoparticles exhibit highest SERS activity. • The SERS substrate based on flower-like Ag particles can be used to detect melamine.

36 MATERIALS SCIENCE↗

Growth of single-crystal {alpha}-MnO{sub 2} nanorods on multi-walled carbon nanotubes

Single-crystal {alpha}-MnO{sub 2} nanorods were grown on multi-walled carbon nanotubes (MWNTs) in H{sub 2}SO{sub 4} aqueous solution. The morphology and microstructure of the composites were examined by transmission electron microscopy, high-resolution transmission electron microscopy (HRTEM), X-ray diffractometry and energy dispersive spectroscopy (EDS). The results show that {alpha}-MnO{sub 2} single-crystal nanorods with a mean diameter of 15 nm were densely grown on the surface of MWNTs. Those MWNTs/MnO{sub 2} composites were used as an electrode material for supercapacitors, and it was found that the supercapacitor performance using MWNTs/MnO{sub 2} composites was improved largely compared to that using pure MWNTs and {alpha}-MnO{sub 2} nanorod mechanically mixed with MWNTs.

36 MATERIALS SCIENCE↗

Lamellar Fe/Al{sub 2}O{sub 3} catalyst for high-yield production of multi-walled carbon nanotubes bundles

The lamellar Fe/Al{sub 2}O{sub 3} catalysts were prepared by sol-gel method, and then with these prepared catalysts, carbon nanotubes (CNTs) were synthesized by catalytic chemical vapor deposition (CCVD) method using C{sub 2}H{sub 2} as precursor. The as-prepared CNTs and Fe/Al{sub 2}O{sub 3} catalysts were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and Raman spectrum. The results proved that the as-prepared CNTs actually existed in bundles. And the growth of CNTs bundles should be attributed to the lamellar catalysts, which supported the bottom growth mechanism of CNTs. The transition metal of Mo was not introduced in catalysts to produce CNTs bundles, which was different with others' results.

36 MATERIALS SCIENCE↗

Preparation of carbon nanotube-neodymium oxide composite and research on its catalytic performance

Carbon Nanotube-Neodymium Oxide (CNT-Nd{sub 2}O{sub 3}) composite was prepared by using acid treated carbon nanotubes (CNTs) and neodymium nitrate in the presence of sodium dodecyl sulfate and ammonia liquid. Techniques of transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and differential thermal analysis (DTA) are used to characterize the morphology, structure, composition and catalytic property of the CNT-Nd{sub 2}O{sub 3} composite. The experimental results show that the Nd{sub 2}O{sub 3} nanoparticles, which have an average diameter of about 30-40 nm, are loaded on the surface of carbon nanotube. Compared with pure Nd{sub 2}O{sub 3} nanorods, the CNT-Nd{sub 2}O{sub 3} composite can catalyze the thermal decomposition of ammonium perchlorate more effectively. The sampling methods of the experimental samples made a difference on the catalytic experiment results, and the best catalytic result was obtained when de-ionized water served as the solvent of ammonium perchlorate.

36 MATERIALS SCIENCE↗

Rapid synthesis, characterization and optical properties of TiO{sub 2} coated ZnO nanocomposite particles by a novel microwave irradiation method

A novel and rapid microwave method was used to prepare TiO{sub 2} coated ZnO nanocomposite particles. The resulted particles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM) and X-ray photoelectron spectroscopy (XPS). Results show that ZnO nanoparticles were coated with 6-10 nm amorphous TiO{sub 2} layers. In addition, zeta potential analysis demonstrated the presence of TiO{sub 2} layer on the surface of ZnO nanoparticles. Photoluminescence (PL) spectroscopy and UV-visible spectroscopy were used to investigate the optical properties of the nanoparticles. Compared to uncoated ZnO nanoparticles, the TiO{sub 2} coated ZnO nanoparticles showed enhanced UV emission. The UV-visible diffuse reflectance study revealed the significant UV shielding characteristics of the nanocomposite particles. Moreover, amorphous TiO{sub 2} coating effectively reduced the photocatalytic activity of ZnO nanoparticles as evidenced by the photodegradation of Orange G with uncoated and TiO{sub 2} coated ZnO nanoparticles under UV radiation.

36 MATERIALS SCIENCE↗

Template synthesis and characterization of molybdenum disulfide nanotubules

Graphical abstract: The image is a SEM image of branched MoS{sub 2} nanotubes, which are prepared in AAO templates. It is obvious to observe the branch of MoS{sub 2} nanotubes (labeled by arrows), and it reflects the microcosmic morphologies of pores in templates. Highlights: {yields} Large quantities of hollow MoS2 tubules. {yields} Explanation for the formation of branched shape. {yields} Explanation for the morphology of bamboo-like structure. -- Abstract: Molybdenum disulfide nanotubules were prepared by thermal decomposition of ammonium thiomolybdate ((NH{sub 4}){sub 2}MoS{sub 4}) precursors on anodized aluminum oxide template. Large quantities of hollow MoS{sub 2} nanotubules with the bamboo-like structure were obtained. The morphology and structures of MoS{sub 2} tubules were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, electron diffraction and optical absorption spectroscopy. MoS{sub 2} nanotubules completely reflected the three-dimensional structure of nanopores in template. The properties of Mo-S chemical bonds in lattice structure and the wetting state between porous surface and precursor have a great effect on the formation of sections in nanotubules, the ridges in the nanopores also play a very special role of this formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of aluminum substitution on photocatalytic property of BiVO{sub 4} under visible light irradiation

Graphical abstract: Visible-light-driven Al/BiVO{sub 4} photocatalyst was prepared by a hydrothermal process. After introducing Al, the BiVO{sub 4} particles retain monoclinic scheelite structures and the ability of visible light absorption is enhanced. XPS and FTIR results reveal that the Al ions influence the local structure of the BiVO{sub 4}. The photocatalytic experiments demonstrate that the Al species incorporation can effectively enhance the photocatalytic activity of BiVO{sub 4} due to the existence of distorted VO{sub 4}{sup 3-} tetrahedron and the stronger optical absorption intensity. Highlights: Black-Right-Pointing-Pointer The visible-light-driven Al/BiVO{sub 4} photocatalysts are first prepared in our study. Black-Right-Pointing-Pointer It is found that Al is introduced into the BiVO{sub 4} lattice successfully. Black-Right-Pointing-Pointer The Al-doped BiVO{sub 4} shows a far higher photocatalytic activity than undoped BiVO{sub 4}. Black-Right-Pointing-Pointer One of the reason for the higher activity is the distorted VO{sub 4}{sup 3-} tetrahedron. Black-Right-Pointing-Pointer Another reason for the higher activity is the strong optical absorption intensity. -- Abstract: Novel visible-light-driven Al/BiVO{sub 4} photocatalysts were synthesized via a facile hydrothermal method for the first time. The samples were characterized by X-ray diffraction, N{sub 2}-sorption, UV-vis diffuse reflectance spectra, scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transformed infrared spectra and X-ray photoelectron spectroscopy. The photocatalytic activity of the samples was evaluated by the decomposition of methylene blue under visible light irradiation (400 nm < {lambda} <580 nm) and was compared with that of single-phase BiVO{sub 4}. The results revealed that the introduction of Al can improve photocatalytic performance greatly and different concentration of Al resulted in different photocatalytic activity. The highest activity is obtained by the sample with a doping concentration of 12 at%. The reason for the enhanced photocatalytic activities of Al/BiVO{sub 4} samples was also discussed in this paper.

36 MATERIALS SCIENCE↗

Facile synthesis, spectral properties and formation mechanism of sulfur nanorods in PEG-200

Graphical abstract: Homogeneous rod-like structure of sulfur with a typical diameter of about 80 nm and an average aspect ratio of about 6–8 was obtained. The sulfur nanoparticles could self-assemble from spherical particles to nanorods in PEG-200. During the self-assembling process, the absorption band showed a red shift which was due to the production of nanorods. Highlights: ► A novel, facile and greener method to synthesize sulfur nanorods by the solubilizing and templating effect of PEG-200 was reported. ► S{sup 0} nanoparticles could self assemble in PEG-200 and finally form monodisperse and homogeneous rod-like structure with an average diameter of about 80 nm, the length ca. 600 nm. ► The absorption band showed a red shift and the RRS intensity enhanced continuously during the self-assembling process. ► PEG-200 induced the oriented attachment of sulfur nanoparticles by the terminal hydroxyl groups. -- Abstract: The synthesis of nano-sulfur sol by dissolving sublimed sulfur in a green solvent-PEG-200 was studied. Homogeneous rod-like structure of sulfur with a typical diameter of about 80 nm and an average aspect ratio of 6–8 was obtained. The structure, morphology, size, and stability of the products were investigated by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering (DLS) measurements. The spectral properties of the products were investigated by ultraviolet-visible (UV–vis) absorption and resonance Rayleigh scattering spectroscopy (RRS). The results showed that the spherical sulfur nanoparticles could self-assemble into nanorods in PEG-200. During the self-assembling process, the absorption band showed a red shift and the RRS intensity enhanced continuously. There was physical cross-linking between PEG and sulfur nanoparticles. PEG-200 induced the oriented attachment of sulfur nanoparticles by the terminal hydroxyl groups. This research provides a greener and more environment-friendly synthetic method for the production of sulfur nanorods.

36 MATERIALS SCIENCE↗

Facile synthesis of self-assembled SnO nano-square sheets and hydrogen absorption characteristics

Graphical abstract: Display Omitted Highlights: ► Self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized. ► The average size of the nano-square sheets is about 200–400 nm. ► Direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. ► The hydrogen absorption capacity of as-synthesized material was 1.194 wt.% comparatively good. -- Abstract: Stannous oxide is an important functional material which contributes to a wide range of applications in energy storage and optoelectronic devices. In the present study, the single crystalline self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized with template-free hydrothermal growth method. The morphology, composition and structure were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) with selected area electron diffraction (SAED), energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Raman spectroscopy, respectively. FESEM results have illustrated that the size of self-assembled 3D hierarchical polygon-shape structure of SnO is in the range of 8–12 μm and the average size of the nano-square sheets is about 100 nm. X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns have revealed that the prepared SnO nano-square sheets exist in single-crystalline nature. Two Raman modes A{sub 1g} = 211 cm{sup −1} and B{sub 1g} = 113 cm{sup −1} were observed by Raman spectroscopy, which is consistent with nano tetragonal phase SnO. Furthermore, the chemical valence of Sn and relative atomic composition of as-prepared SnO have been confirmed by X-ray photoelectron spectroscopy (XPS). Ultraviolet–visible–near infrared spectrophotometry was used to study the transmittance behavior of SnO nano-structures and direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. The first ever study on hydrogen absorption characteristics of SnO nano-square sheets performed at 373 K shows good absorption capacity of 1.194 wt.%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of temperature on the optical and structural properties of hexadecylamine capped ZnS nanoparticles using Zinc(II) N-ethyl-N-phenyldithiocarbamate as single source precursor

Graphical abstract: Display Omitted Highlights: ► HDA-capped ZnS nanoparticles were synthesized via thermolysis of a single source precursor. ► Zinc(II) N-ethyl-N-phenyldithiocarbamate was used as the single source precursor. ► The growth temperature was varied to study the optical properties of the nanocrystals. ► Change in growth temperature affects the structural properties of the ZnS nanoparticles. ► Hexagonal wurtzite phase was obtained at lower temperatures while cubic sphalerite phase was obtained at higher growth temperatures. -- Abstract: Reported in this work is the synthesis of HDA (hexadecylamine)-capped ZnS nanoparticles by a single source route using Zinc(II) N-ethyl-N-phenyldithiocarbamate as a precursor. By varying the growth temperature, the temporal evolution of the optical properties and morphology of the nanocrystals were investigated. The as-synthesized nanoparticles were characterized using UV–vis absorption and photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). All the particles exhibited quantum confinement in their optical properties with band edge emission at the early stage of the reaction. The XRD showed transition from hexagonal wurtzite phase to cubic sphalerite phase as the growth temperature increases. The TEM image showed that the particles are small and spherical in shape while the HRTEM image confirmed the crystalline nature of the material.

36 MATERIALS SCIENCE↗

Substrate bias induced synthesis of flowered-like bunched carbon nanotube directly on bulk nickel

Highlights: • Flowered-like bunched MWCNTs have been synthesized by MW PECVD technique. • Effect of substrate bias on the properties of MWCNT has been studied. • Minimum E{sub T} = 1.9 V/μm with β = 4770 has been obtained in the film deposited at −350 V. - Abstract: This paper reports the effect of substrate bias on the multiwalled carbon nanotube (MWCNT) deposited on nickel foil by microwave plasma enhanced chemical vapor deposition technique. The MWCNTs have been characterized by the scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Raman spectroscopy, field emission and current–voltage characteristic of the heterojunction diode. The SEM images exhibit unique hierarchical flowered-like bunched and conformally coated MWCNTs. Substrate bias induced ion bombardment helps in the enhancement of hydrocarbon dissociation and is responsible for flowered-like MWCNTs growth. The HRTEM micrographs show the base growth mechanism for MWCNTs. The value of turn on field for emission decreases from 5.5 to 1.9 V/μm and field enhancement factor increases from 927 to 4770, respectively, with the increase of substrate bias. The diode ideality factor of CNT/ n-Si heterojunction is evaluated as 2.4 and the on/off current ratio is found to be 7 at ±2 V, respectively.

36 MATERIALS SCIENCE↗

Enhancement under UV–visible and visible light of the ZnO photocatalytic activity for the antibiotic removal from aqueous media using Ce-doped Lu3Al5O12 nanoparticles

We report the first synthesis of Ce-doped Lu{sub 3}Al{sub 5}O{sub 12} Nanoparticles/ZnO Nanostructure (LuAG:Ce/ZnO NS) via a rapid hydrolysis/condensation of Zn(OAc){sub 2} on the surface of LuAG:Ce NPs. The structural, morphological and optical properties of LuAG:Ce/ZnO NS have been fully investigated using X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM), Energy Dispersive X-ray Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR), diffuse reflectance UV–visible spectroscopy and N2 adsorption/desorption measurements. Results showed that ZnO Nanocrystals (ZnO NCs) of about 10 nm diameter are homogeneously grown on the surface of 100 nm LuAG:Ce NPs in a core/shell-like structure. The photocatalytic activity of the as-prepared nanostructure has been evaluated throught the photodegradation of sulfathiazole (STZ), a molecule widely used as antibiotic, under UV–vis and visible light irradiation. Results showed that STZ undergoes much higher photodegradation in the presence of LuAG:Ce/ZnO NS compared to the pure ZnO NCs under both UV–vis and visible light. This enhanced photocatalytic capability was found to result from higher specific surface area and visible light absorption in LuAG:Ce/ZnO NS, which allowed for more surface active sites and enhanced hydroxyl radicals (·OH) production from the nanostructured photocatalyst. The recyclability of LuAG:Ce/ZnO NS was also demonstrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗