Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high performance space computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Advances in Structure Prediction of Lanthanides and Actinides with Genetic Algorithms

Computationally guided materials discovery has advanced significantly in the past two decades. Recent developments of widely available genetic algorithm-based structure prediction software in the past 10+ years has led to increased use of this methodology in the discovery and design of new materials. Owing to the computational challenges of treating f-block elements and computationally expensive methods for structure prediction, the discovery of new phases of lanthanide and actinide materials has been particularly challenging. With advancements in the development of genetic algorithms for structure prediction and the continuing improvement of high-performance computing resources, genetic algorithms provide a tractable method to find new stable phases of materials at high pressure or to search a large phase space for unknown compounds. Genetic algorithms have already been applied to the successful identification of novel lanthanide and actinide materials, as well as the prediction of unusual material properties in new phases that make promising synthetic targets.

Shields, Ashley↗
NASA NTRS1970

Navigation for space shuttle approach and landing using an inertial navigation system augmented by data from a precision ranging system or a microwave scan beam landing guidance system

A preliminary study has been made of the navigation performance which might be achieved for the high cross-range space shuttle orbiter during final approach and landing by using an optimally augmented inertial navigation system. Computed navigation accuracies are presented for an on-board inertial navigation system augmented (by means of an optimal filter algorithm) with data from two different ground navigation aids; a precision ranging system and a microwave scanning beam landing guidance system. These results show that augmentation with either type of ground navigation aid is capable of providing a navigation performance at touchdown which should be adequate for the space shuttle. In addition, adequate navigation performance for space shuttle landing is obtainable from the precision ranging system even with a complete dropout of precision range measurements as much as 100 seconds before touchdown.

Mcgee, L. A.↗
NASA NTRS2013

Radial Profiles of Plasma Electron Characteristics in a Low-Power Arcjet

Since 1960, the Arc Jet Complex at NASA Ames Research Center has been a source of long-duration, high-enthalpy flow for materials testing with application to the thermal protection of aerospace vehicle components. From their inception the facilities have played an integral role supporting many of NASA's space flight programs and numerous DoD projects. In recent years advancements in computational fluid dynamics (CFO) have made the resultant models a valuable tool for assessing and predicting performance, however, the inherent limitation of models to compensate for a dissociated, transitionally high temperature nonequilibrated flowfield have made further measurements necessary. The use of electrostatic probe diagnostics within similarly harsh plasma environments in previous studies have been met with much success. In this study, the use of a single Langmuir probe was implemented to characterize the plasma parameters of interest as they vary radially within a large volume of the plume. Classical Langmuir probe theory was applied to achieve first order estimates of the heavy particle temperature, the ratio T(sub i)/T(sub e), and the ionization fraction. As expected, both the electron temperature and electron density measurements show a dependence on radial distance from the plume centerline, with electron density profiles showing the largest dependence. This paper aims to validate and strengthen modeling work conducted at the NASA Ames Research Center by measuring the critical plasma parameters (electron temperature, electron density, and plasma potential) within the arc plume of a subscale arc jet. These parameters are intended to give physical insight into the flow characteristics while providing the necessary boundary conditions to validate full scale simulations.

Codron, Douglas↗
NASA NTRSDate not supplied

Model Assisted Probability of Detection for NASA Space Missions

Model assisted probability of detection (MAPOD) uses data from simulations to improve a traditional probability of detection (POD) study. This could include extending the parameter space to reduce uncertainty or substituting experimental data with simulated data to reduce the time and cost of a POD study. In the past MAPOD was difficult due to limited computational resources, but recent innovations in simulation tools and high-performance computing have made this type of high-degree-of-freedom modelling possible, and complex structures have made it necessary. This presentation will summarize the work done by the computational nondestructive evaluation (CNDE) group at NASA Langley Research Center (LaRC) to complete a MAPOD study for phased array ultrasound testing (PAUT) of a friction stir welding (FSW) method to be used on Space Launch System (SLS) structures. The three critical needs for a MAPOD study are a validated and verified model of the inspection technique for the structure being inspected, some experimental POD data, and an uncertainty model for both the model and the experimental data. PAUT was simulated using Extende CIVA’s UT module. The model was validated using laboratory inspection data from NASA Marshall Space Flight Center (MSFC) for a Hit/Miss POD for FSW in 2219-T87 aluminum panels representative of those used in the SLS. This model was then used to simulate flaw sizes that were originally omitted from the original POD study. The results of this new MAPOD study will be presented along with a discussion of the methods and processes used to analyze the original data, selected simulation parameters, and development of the uncertainty model used for the statistical analysis. The goal of this effort is not just to improve the POD study but to demonstrate the value of MAPOD and provide a roadmap for application of MAPOD on future projects.

Elizabeth Gregory↗
DOE OSTI2023

Quantum simulations of SO(5) many-fermion systems using qudits

The structure and dynamics of many-body systems are the result of a delicate interplay between underlying interactions. Fermionic pairing, for example, plays a central role in various physical systems, ranging from condensed matter to nuclear systems, where it can lead to collective phenomena such as superconductivity and superfluidity. In atomic nuclei, the interplay between pairing and particle-hole interactions leads to a high degree of complexity and intricate entanglement structures. Despite this apparent complexity, symmetries emerge and manifest themselves in observable regular patterns. These symmetries and their breakings have long been used to determine relevant degrees of freedom and simplify classical descriptions of many-body systems. Here, this work explores the potential utility of quantum computers with arrays of qudits in simulating interacting fermionic systems, when the qudits can naturally map the relevant degrees of freedom determined by an underlying symmetry group. The Agassi model of fermions interacting via particle-hole and pairing interactions is based on an underlying so(5) algebra. Such systems can intuitively be partitioned into pairs of modes with five basis states, which thus naturally map to arrays of d = 5 qudits (qu5its). Classical noiseless simulations of the time evolution of systems with up to twelve qu5its are performed, by implementing quantum circuits that are developed herein, using PYTHON codes invoking Google's CIRQ software. The resource requirements of the qu5it circuits are analyzed and compared with two different mappings to qubit systems: a physics-aware Jordan-Wigner mapping requiring four qubits per mode pair and a state-to-state mapping requiring three qubits per mode pair. While the dimensionality of Hilbert spaces in mappings to qu5it systems are less than those for the corresponding qubit systems, the number of entangling operations, depending on the available hardware, can either be greater or smaller than for the physics-aware Jordan-Wigner mapping. The state-to-state mapping, while having a smaller Hilbert space than Jordan-Wigner mappings, appears to be the least efficient in gate counts. Further, a previously unknown sign problem has been identified from Trotterization errors in time evolving high-energy excitations. There appear to be advantages in employing quantum computers with arrays of qudits to perform simulations of many-body dynamics that exploit the role of underlying symmetries, specifically in lowering the required quantum resources and in reducing anticipated errors that take the simulation out of the physical space. If the necessary entangling gates are not directly supported by the hardware, physics-aware mappings to qubits may, however, be advantageous for other aspects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1990

Research into software executives for space operations support

Research concepts pertaining to a software (workstation) executive which will support a distributed processing command and control system characterized by high-performance graphics workstations used as computing nodes are presented. Although a workstation-based distributed processing environment offers many advantages, it also introduces a number of new concerns. In order to solve these problems, allow the environment to function as an integrated system, and present a functional development environment to application programmers, it is necessary to develop an additional layer of software. This 'executive' software integrates the system, provides real-time capabilities, and provides the tools necessary to support the application requirements.

Collier, Mark D.↗
DOE OSTI2022

Enhancing scalability of a matrix-free eigensolver for studying many-body localization

We propose several techniques to enhance the parallel scalability of a matrix-free eigensolver designed for studying many-body localization (MBL) of quantum spin chain models with nearest-neighbor interactions and on-site disorder. This type of problem is computationally challenging because the dimension of the associated Hamiltonian matrix grows exponentially with respect to the number of spins L, and we need to average over different realizations of the random disorder to obtain relevant statistical behavior. For each disorder realization, we need to compute eigenvalues from different regions of the spectrum and their corresponding eigenvectors. In previous work, the interior eigenstates for a single eigenvalue problem are computed via the shift-and-invert Lanczos algorithm. Due to the extremely high memory footprint of the LU factorizations, this technique is not well suited for large L’s. For example, we need thousands of compute nodes on modern high performance computing infrastructures to go beyond L = 24. The matrix-free approach does not suffer from this memory bottleneck, however, its scalability is limited by a computation and communication load imbalance. To reduce this imbalance and to significantly enhance the scalability of the matrix-free eigensolver, we reorder the matrix and leverage the consistent space runtime, CSPACER. We also show its efficiency in managing irregular communication patterns at scale compared to optimized MPI non-blocking two-sided and one-sided RMA implementation variants. This effort enables us to study MBL for spin chains with a larger number of spins. The efficiency and effectiveness of the proposed algorithm is demonstrated by computing eigenstates on a massively parallel many-core high performance computer.

METIS↗
DOE OSTI2025

LHC Event Generation in the Exascale Era

MCFM is a dedicated Monte-Carlo simulation program for collider phenomenology at highest energies. Designed during the Tevatron era, it has successfully incorporated the latest developments needed for LHC precision calculations and remained on the forefront of collider phenomenology. The Fortran code includes interfaces to modern PDF and loop reduction libraries but has been unchanged structurally compared to the earlier versions. Parallel computing has been enabled using OpenMP and MPI. MCFM provides numerically highly stable one-loop amplitudes and superior phase-space efficiency, leading to excellent performance in NXLO calculations using jettiness or qT subtraction techniques for IR regularization.

Campbell, John [Fermilab]↗
NASA NTRS1973

The future look in rocket engines

The Space Shuttle Main Engine and an Aerospike engine for the Space Tug illustrate the rocket engines of the future. This paper includes a description of design features leading to high performance, long life, and low cost. Computer control of the engine, turnaround maintenance plans, and engine development plans are also discussed.

Sanchini, D. J.↗
DOE OSTI2020

Scalable Deep-Learning-Accelerated Topology Optimization for Additively Manufactured Materials

Topology optimization (TO) is a popular and powerful computational approach for designing novel structures, materials, and devices. Two computational challenges have limited the applicability of TO to a variety of industrial applications. First, a TO problem often involves a large number of design variables to guarantee sufficient expressive power. Second, many TO problems require a large number of expensive physical model simulations, and those simulations cannot be parallelized. To address these issues, we propose a general scalable deep-learning (DL) based TO framework, referred to as SDL-TO, which utilizes parallel schemes in high performance computing (HPC) to accelerate the TO process for designing additively manufactured (AM) materials. Unlike the existing studies of DL for TO, our framework accelerates TO by learning the iterative history data and simultaneously training on the mapping between the given design and its gradient. The surrogate gradient is learned by utilizing parallel computing on multiple CPUs incorporated with a distributed DL training on multiple GPUs. The learned TO gradient enables a fast online update scheme instead of an expensive update based on the physical simulator or solver. Using a local sampling strategy, we achieve to reduce the intrinsic high dimensionality of the design space and improve the training accuracy and the scalability of the SDL-TO framework. The method is demonstrated by benchmark examples and AM materials design for heat conduction. The proposed SDL-TO framework shows competitive performance compared to the baseline methods but significantly reduces the computational cost by a speed up of around 8.6x over the standard TO implementation.

Bi, Sirui↗
NASA NTRS1994

Prediction of Unshsrouded Rotor Blade Tip Heat Transfer

The rate of heat transfer on the tip of a turbine rotor blade and on the blade surface in the vicinity of the tip, was successfully predicted. The computations were performed with a multiblock computer code which solves the Reynolds Averaged Navier-Stokes equations using an efficient multigrid method. The case considered for the present calculations was the Space Shuttle Main Engine (SSME) high pressure fuel side turbine. The predictions of the blade tip heat transfer agreed reasonably well with the experimental measurements using the present level of grid refinement. On the tip surface, regions with high rate of heat transfer was found to exist close to the pressure side and suction side edges. Enhancement of the heat transfer was also observed on the blade surface near the tip. Further comparison of the predictions was performed with results obtained from correlations based on fully developed channel flow.

Ameri, A. A.↗
DOE OSTI2024

Mitigating the Effects of Au-Al Intermetallic Compounds Due to High-Temperature Processing of Surface-Electrode Ion Traps

Stringent physical requirements need to be met for the high-performing surface-electrode ion traps used in quantum computing and timekeeping. In particular, these traps must survive a high-temperature environment for vacuum chamber preparation and support high RF voltage on closely spaced electrodes. Due to the use of gold wire bonds on aluminum pads, intermetallic growth can lead to wire bond failure via breakage or high resistance, limiting the lifetime of a trap assembly to a single multiday bake at 200 ° C. Using traditional thick metal stacks to prevent intermetallic growth, however, can result in trap failure due to RF breakdown events. Through high-temperature experiments, we conclude that an ideal metal stack for ion traps is Ti/Pt/Au (20/100/250 nm), which allows for a cumulative bakeable time of roughly 86 days without compromising the trap voltage performance. This increase in the bakeable lifetime of ion traps will remove the need to discard otherwise functional ion traps when vacuum hardware is upgraded, which will greatly benefit ion trap experiments.

Haltli, Raymond A.↗
NASA NTRSDate not supplied

Model Assisted Probability of Detection for NASA Space Missions

Model assisted probability of detection (MAPOD) uses data from simulations to improve a traditional probability of detection (POD) study. This could include extending the parameter space to reduce uncertainty or substituting experimental data with simulated data to reduce the time and cost of a POD study. In the past MAPOD was difficult due to limited computational resources, but recent innovations in simulation tools and high-performance computing have made this type of high-degree-of-freedom modeling possible, and complex structures have made it necessary. This presentation will summarize the work done by the computational nondestructive evaluation (CNDE) specialists within the Nondestructive Evaluation Sciences branch at NASA Langley Research Center (LaRC) to complete a MAPOD study for phased array ultrasound testing (PAUT) of a friction stir welding (FSW) method to be used on Space Launch System (SLS) structures. The three critical needs for a MAPOD study are a validated and verified model of the inspection technique for the structure being inspected, some experimental POD data, and an uncertainty model for both the model and the experimental data. PAUT was simulated using Extende CIVA’s UT module. The model was validated using laboratory inspection data from NASA Marshall Space Flight Center (MSFC) for a Hit/Miss POD for FSW in 2219-T87 aluminum panels representative of those used in the SLS. This model was then used to simulate flaw sizes that were originally omitted from the original POD study. The results of this new MAPOD study will be presented along with a discussion of the methods and processes used to analyze the original data, selected simulation parameters, and development of the uncertainty model used for the statistical analysis. The goal of this effort is not just to improve the POD study but to demonstrate the value of MAPOD and provide a roadmap for application of MAPOD on future projects.

Elizabeth Gregory↗
NASA NTRSDate not supplied

Thermal Protection Materials and Systems at NASA Ames Research Center

Thermal Protection Systems (TPS) are critical for enabling NASA missions involving high-speed atmospheric flight where the entries usually include descending into the atmosphere followed by a trajectory that aims to burn off energy and result in a controlled landing. NASA Ames focuses on qualifying and certifying TPS for current missions, sustaining TPS for future missions, and developing new TPS for upcoming missions where a heritage solution is not viable. More recently there is also a focus on advancing and transferring technologies that can benefit both commercial and government space needs.Developing mature thermal protection systems is a lengthy process involving advanced tools, extensive research, and testing. Design and analysis tools are used to predict aerothermal environments, aid the design of test and flight hardware, and support the testing for the thermal/mechanical response of thermal protection systems. More recently, advances in computational methods help reduce the time and cost of technological advances, aid in optimized material architecture design, and improve material properties and performance. While high-enthalpy testing that simulates the conditions of space flight remains essential for the evaluation and development of TPS materials, computational tools are already showing promise in reducing the need for widespread testing and can help fast-trackthe design cycle.With the exploration of new destinations EDL instrumentation remains an important element of the heatshield and NASA Ames and partners have developed and delivered instrumentation flight hardware in support of recent Mars missions,including Mars Science Lab (MSL) and Mars 2020 (M2020),as well as Artemis Orion. Sensors installed on the heatshield and backshell of spacecraft provide coveted information about the aerodynamic and aerothermal environment during entry.Overthe years NASA Ames has brought several reusable and ablative TPS materials to a level of readiness to hand off to missions and the Thermal Protection Materials branch continues to serve as a TPS steward for the agency.

Thermal protection materials↗
DOE OSTI2025

A Synthesis Methodology for Intelligent Memory Interfaces in Accelerator Systems

Domain-specific systems improve the performance of a specific set of applications compared to general-purpose processing systems by deploying custom hardware accelerators. These hardware accelerators are generated using high-level synthesis (HLS) tools. The HLS tools enable a comprehensive design space exploration to optimize the compute performance of the generated accelerators. However, they often ignore the challenges of implementing the accelerators in a system-on-chip, particularly how the accelerators access memory. Our work introduces a buffering system design that improves accelerators' memory accesses by intelligently employing burst transactions to prefetch useful data from external memory to on-chip local buffers. Our design is dynamic, parametric, and transparent to the accelerators generated by HLS tools. We derive the buffering system parameters using appropriate compiler-based analysis passes and memory channel latency constraints. The proposed buffering system design results in, on average, 8.8x performance improvements while lowering memory channel utilization on average by 53.2% for a set of PolyBench kernels.

Limaye, Ankur M. (ORCID:0000000194062584)↗
NASA NTRSDate not supplied

Thermal Protection Materials and Systems at NASA Ames Research Center

Thermal Protection Systems (TPS) are critical for enabling NASA missions involving high-speed atmospheric flight where the entries usually include descending into the atmosphere followed by a trajectory that aims to burn off energy and result in a controlled landing. NASA Ames focuses on qualifying and certifying TPS for current missions, sustaining TPS for future missions, and developing new TPS for upcoming missions where a heritage solution is not viable. More recently there is also a focus on advancing and transferring technologies that can benefit both commercial and government space needs. Developing mature thermal protection systems is a lengthy process involving advanced tools, extensive research, and testing. Design and analysis tools are used to predict aerothermal environments, aid the design of test and flight hardware, and support the testing for the thermal/mechanical response of thermal protection systems. More recently, advances in computational methods help reduce the time and cost of technological advances, aid in optimized material architecture design, and improve material properties and performance. While high-enthalpy testing that simulates the conditions of space flight remains essential for the evaluation and development of TPS materials, computational tools are already showing promise in reducing the need for widespread testing and can help fast-track the design cycle. With the exploration of new destinations EDL instrumentation remains an important element of the heatshield and NASA Ames and partners have developed and delivered instrumentation flight hardware in support of recent Mars missions (MSL and M2020) as well as Artemis Orion. Sensors installed on the heatshield and backshell of spacecraft provide coveted information about the aerodynamic and aerothermal environment during entry. Over the years NASA Ames has brought several reusable and ablative TPS materials to a level of readiness to hand off to missions and the branch continues to serve as a TPS steward for the agency. This presentation will cover current developments in the above areas that have enabled recent missions, and look to future TPS needs for missions such as Ice Giants.

thermal protection materials↗
NASA NTRSDate not supplied

Increasing accessibility to deep learning-based analytics for space biology: pretrained models, transfer learning, and analytics platform development

Biological systems react in complex ways to the stressors of spaceflight, and the data capturing these relationships is concomitantly high-dimensional and complex. Deep learning and machine learning approaches are increasingly popular as an analytical approach for space biosciences, due to their ability to model complex relationships in complex data. However, such approaches often require large datasets and extensive computational resources. New approaches that minimize data sizes and computational power needed to leverage machine learning, and resources that make these approaches accessible, are needed to increase accessibility and adoption of machine learning in the space biosciences. Transfer learning, in which a pretrained model of broad utility is trained on a large dataset, and subsequently reused on downstream applications for which data is more limited, is one approach to minimizing data and computational intensity of deep learning applications. This transfer learning approach results in more performant models in high-dimensional, low-sample-size settings such as space biology, as compared to training models on limited data from scratch. This presentation will outline efforts to generate pretrained models for the space biology community, and highlight transfer learning applications modeling microbial antibiotic resistance during spaceflight. Finally, in order to increase accessibility of these models and tools, as well as others, for the broader space biology community, we present a modeling and analysis platform facilitating machine learning applications in space biology. This platform streamlines machine learning training and analysis in a notebook format, facilitates download and use of space biology data from the NASA GeneLab database, and can be utilized on NASA-hosted servers or downloaded and hosted locally. This effort, as part of the AI4LS (Artificial Intelligence for Life in Space) working group, will increase accessibility, feasibility, and performance of machine learning approaches for the space biology community.

Adrienne Hoarfrost↗
NASA NTRS2017

Classification of Wildfires from MODIS Data Using Neural Networks

Wildfires are destructive to both life and property, which necessitates an approach to quickly and autonomously detect these events from orbital observatories. This talk will introduce a neural network based approach for classifying wildfires in MODIS multispectral data, and will show how it could be applied to a constellation of low-cost CubeSats. The approach combines training a deep neural network on the ground using high performance consumer GPUs, with a highly optimized inference system running on a flight-proven embedded processor. Normally neural networks execute on hardware orders of magnitude more powerful than anything found in a space-based computer, therefore the inference system is designed to be performance even on the most modest of platforms. This implementation is able to be significantly more accurate than previous neural network implementations, while also approaching the accuracy of the state-of-the-art MODFIRE data products.

Artificial Intelligence↗