Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high explosives, simulations, modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

228 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

A Historical Overview of the NASA Orbital Debris Program Office’s Laboratory Optical Measurements

The NASA Orbital Debris Program Office (ODPO) has used laboratory measurements to help bring ground-based measurements together with models to ascertain Earth-orbiting target parameters of interest to support various orbital debris models. In 2005, the Optical Measurement Center (OMC) was established to simulate space-based illumination conditions using equipment and techniques that recreate telescopic observations, particularly source-target-sensor orientations. The intent was to recreate light curves using known aspect angles of known targets and phase angles (angle is defined by the vertex between illumination source-object-detector) to complement telescopic observations that could be used to update the current optical size estimation model (OSEM) – a model that converts object brightness into size for orbital debris models. To support the above goals, the laboratory has undergone several equipment upgrades to increase capabilities over almost 20 years of operation. The primary instrumentation acquires reflectance measurements and includes a solar-like light source, CCD camera with astrometric filters, and robotic arm. A rotary arm was added approximately five years after full operation to allow acquisition through a full 360° range of phase angles. Another part of the OMC instrumentation is a field spectrometer, predominately used for field operations to acquire pre- and post-flight spacecraft material spectral measurements. Additionally, reflectance spectroscopy of various materials is also of interest resulting from hypervelocity impact tests, pristine spacecraft materials, or samples of materials that are used in spacecraft design. These measurements are stored in NASA’s Spectral Material Database, a resource that is still being populated today. The study of spectral measurements also enabled the development of spectral unmixing routines to support the identification of spacecraft materials from spectral data gathered by ground based telescopes. Preliminary OMC investigations focused on feasibility studies to acquire 360° rotation light curves of simple shapes at a single-phase angle and extended to measurements of representative fragments from ground-based explosion tests. To correlate the light curves with ground-based optical measurements, a focused study on high area to mass materials was conducted in support of a newly identified population (at the time) in geosynchronous orbit (GEO) consisting of multi-layered insulation. To further characterize orbital debris, a larger selection of materials was analyzed using laboratory photometric measurements that included representative targets from pristine spacecraft materials and ground-based impact tests. Around 2012, an initiative was requested to understand the feasibility of active debris removal (ADR) of larger targets using grappling methods for spent rocket bodies. Using a priori information on selected targets, scaled-down versions of rocket bodies were generated thanks to improvements in 3D printing technology and machining. These targets were studied in the OMC to understand rotation characteristics. These were compared with telescopic data to determine if the tumble and rotation angles would allow ADR. In 2013, the OMC focused on combining spectral measurements with photometric data to characterize GEO orbital debris. Several years later, NASA acquired a Titan III Transtage test article from “The Boneyard” with a high-resemblance to on-orbit Titan III Transtage rocket bodies, allowing physical access to a representative rocket body that suffered fragmentations in GEO. This prompted the creation of 3D models using lidar technology and spectral measurements of the materials. Focused research also transitioned to specific materials (i.e., solar cells) when telescopic surveys requested characterization of specific GEO targets. In the different research products presented, the focus has been to understand the various parameters that influence optical size estimation, including albedo, phase functions, and brightness variations. Work in this area continues with newer sources of data, including DebriSat, a high-fidelity 56-kg spacecraft replica representative of a modern low Earth orbit (LEO) satellite subjected to a laboratory hypervelocity impact test to understand fragmentation events and to support updates to satellite breakup models and size estimation models. Utilizing the vast population of fragments from DebriSat and prior laboratory impact experiments, the ODPO has focused on acquiring bidirectional reflectance distribution function (BRDF) data to characterize targets in the laboratory, thus removing aspect angle dependencies. Additionally, the DebriSat project has provided improved processes for measuring size via image acquisition, such that a true fragment size can be directly compared to the derived size using the OSEM. The team continues to assess BRDFs and use spectral measurement data to investigate the parameters used in the OSEM, specifically magnitudes, albedo, and phase functions.

Heather Cowardin↗
NASA NTRS2010

What if Things Get Worse? Really Grand Challenges for Modeling and Simulation in a Risky and Complex World or Modeling and Simulation for the "Greater Good"?

Today Modeling and Simulation-- ---as an important practice or industry or area of expertise ----- is at a complex crossroad - a sort of cyber-highway--where these complexities meet-technical, economic, environmental, geopolitical and cultural. They may converge or collide. Let's not kid ourselves. It is all too much for anyone person or organization Malcolm Gladwell said it. "We have constructed a world in which the potential for high tech catastrophe is embedded in the fabric of everyday life." We are surrounded by problems that scream at us from our television, Internet and social networks along with billboards and protest signs. We face not just high tech catastrophes but, also, landslides, earthquakes, tornados, floods and hurricanes and large-scale criminality. Evil, war, famine and pestilence have not gone away. It is all too much to think about. My friend, George Peabody, who taught me everything I know about power said that addressing such issues requires that we constantly build our network, information resources and the credibility and visibility of our work. That is how we will build the power of simulation so it can change the world --even maybe, save it. We need all the help we can get and give one another because our human early warning systems appear to be out of kilter. We seem to have trouble imagining how small failings can continue to lead to catastrophic disaster. Think about O-rings and blowout preventers. One is reminded of the old nursery rhyme, "For want of a nail, a shoe was lost! for want of a shoe the horse was lost! for want of a rider the battle was lost and so the kingdom fell." Although the investigation will take more time for real answers, it is worrisome that a rig worker reported to the BBC that-- weeks before the explosion of Deep Ocean Horizon. -he identified a leak in the oil rig's safety equipment -the Control Pod of the blowout preventer which has giant shears designed to cut and seal off the well's main pipe. With both electronics and hydraulics, these are effectively the brains of the blowout preventer. No one fixed it, he alleges, they just shut it down and relied on the other control pod -an act deemed unacceptable by petroleum expert, Tad Patzek, at the University of Texas. The US Congress has identified numerous other problems with the blowout preventer, including design problems and unexpected modifications.

Fifrey, Priscilla↗
NASA NTRS2008

Multi-wavelength Observations and Modelling of a Solar Flare

Aims: The aim of this work is to investigate the dynamic behavior of a C-class solar flare through the evolution of temperature, emission measure, energy loss and velocity. In particular, the variation of these properties with time are studied using multi-wavelength observations in combination with a recently developed 0-D hydrodynamic model. Methods: The temperature and emission measure evolution were studied using several instruments covering a wide range of temperatures - the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI, >5 MK), GOES-12 (5- 30 MK), the Transition Region and Coronal Explorer (TRACE 171 A, 1 MK) and the Coronal Diagnostic Spectrometer (CDS, 0.03-8 MK). The temperature and emission measure were analysed through the systematic cooling of flare plasma through the response functions of these instruments. These parameters were then investigated using the Enthalpy Based Thermal Evolution of Loops model (EBTEL). The Doppler shifts at both flare footpoints were analysed using five emission lines seen by CDS. Results: The flare began with clear evidence for pre-flare heating. Upflows of approx.90 km/s and low level emission, both observed in Fe XIX before the main impulsive phase were explained by pre-flare gentle chromospheric evaporation. During the main impulsive phase, the flare plasma was heated to a temperature of >13 MK in approximately 10 minutes. Explosive chromospheric evaporation was observed, driving upflows of approx.80 km/s in Fe XIX and simultaneous downflows of approx.20 km/s in He I and O v. At the peak of the Rare, conduction modelled by EBTEL was found to be the dominant loss mechanism, working efficiently to both lower the temperatures and drive gentle chromospheric evaporation. As the temperature fell below approx.8 MK, radiation became the dominant loss mechanism. During the final stages of the decay phase, downflowing plasma was observed at the footpoints in He I, O v and Mg x at velocities of up to approx.40 km/s, suggesting loop draining occurred. Conclusions. This is the first extensive study of the evolution of flare plasma using both spectroscopic and broad-band instruments in conjunction with a comprehensive hydrodynamic model. The flare began with pre-flare heating and then evolved following the predictions of the standard flare model. Detailed analysis of the plasma heating mechanisms was carried out and the heating function most consistent with observations was found to be Gaussian in shape. The simulations suggested that both direct heating and heating by a non-thermal beam played significant roles in this event.

Raftery, Claire L.↗
DOE OSTI2023

Volcanic Imprints in Last-Millennium Land Summer Temperatures in the Circum-North Atlantic Area

Summer cooling is one of the most direct consequences of explosive volcanic eruptions that can affect ecosystems and human societies. Recent studies revealed a multiyear cooling impact on hemispheric and global summer temperatures after tropical eruptions, yet the volcanic responses appear to vary on regional scales. Here, in this work, we revisit volcano-induced summer cooling in eastern Canada and northern and central Europe by applying superposed epoch analysis on CMIP6-PMIP4 simulations and millennial temperature reconstructions based on tree-ring density. We then examine potential causes modulating region-specific volcanic impact. While confirming that, on average, tropical eruptions over the last millennium have induced a longer cooling (>4 yr) than eruptions from extratropical Northern Hemisphere in all three North Atlantic regions, we show that the peak magnitude of cooling is stronger in eastern Canada. We also find that the detected volcanic temperature anomalies can be strongly affected by the selection and number of volcanic events and nonvolcanic signals embedded in the climate time series. This study highlights the risks of using highly noisy proxy records to investigate volcanic impacts, especially in regions with strong unforced climate variability. The CMIP6-PMIP4 simulations generally agree with the three reconstructions on the average response to tropical eruptions, but their performance is poorer regarding the production of significant cooling after extratropical eruptions. Our results further suggest that the particular sensitivity to tropical eruptions in eastern Canada is likely related to increased sea ice surrounding Quebec–Labrador associated with the positive Arctic Oscillation and North Atlantic Oscillation formed during the first posteruption winter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Covariant density functional theory input for r-process simulations in actinides and superheavy nuclei: The ground state and fission properties

A systematic investigation of the ground-state and fission properties of even-even actinides and superheavy nuclei with Z = 90–120 from the two-proton up to two-neutron drip lines with proper assessment of systematic theoretical uncertainties has been performed for the first time in the framework of covariant density functional theory (CDFT). Furthermore, these results provide a necessary theoretical input for the r-process modeling in heavy nuclei and, in particular, for the study of fission cycling. Four state-of-the-art globally tested covariant energy density functionals (CEDFs), namely, DD-PC1, DD-ME2, NL3*, and PC-PK1, representing the major classes of the CDFT models are employed in the present paper. Ground-state deformations, binding energies, two-neutron separation energies, α-decay Q α values and half-lives, and the heights of fission barriers have been calculated for all these nuclei. Theoretical uncertainties in these physical observables and their evolution as a function of proton and neutron numbers have been quantified and their major sources have been identified. Spherical shell closures at Z = 120, N = 184, and N = 258 and the structure of the single-particle (especially, high-j) states in their vicinities as well as nuclear matter properties of employed CEDFs are two major factors contributing to theoretical uncertainties. However, different physical observables are affected in a different way by these two factors. For example, theoretical uncertainties in calculated ground-state deformations are affected mostly by the former factor, while theoretical uncertainties in fission barriers depend on both of these factors.

190 ≤ A ≤ 219↗
NASA NTRS1996

Comet Shoemaker-Levy 9, Jupiter, and Impact Shock Chemistry

Four years ago this month, a hitherto unknown comet in loose orbit around Jupiter passed so near the giant planet that it was torn apart into 20 fragments by tides. One orbit later, two years ago this month, the fragments of doomed comet P/Shoemaker Levy (SL9) fell into Jupiter. The enormous energies of these impacts (the largest fragments were nearly 1 km across and, hitting at 60 km/s, released some 2-4 x 10(exp 27) ergs) produced enormous explosions. Several of the ejecta plumes were imaged towering 3000 km above Jupiter's limb. The heat released when the plumes fell was considerable and easily observed on Earth. The impacts produced strong shocks, both promptly at the impact site and again, later, and over thousands of kilometers, when the ejecta plume reentered the atmosphere. The focus of this talk will be to discuss what the SL9 impacts taught us about impact shock chemistry - the processes, the ingredients, the results - and what inferences we may draw for impacts on early Earth. Shock chemistry generates a suite of molecules not usually seen on Jupiter. The most surprising report was of a huge amount of diatomic sulfur S2 at the site of the G impact. Other unusual products include CS, CS2, OCS, H2S, SO2, HCN, CO, and H2O; although H2S and H2O are doubtless abundant below the visible clouds. Hot or enhanced CH4 and NH3 were also detected. A general rule of shock chemistry is that CO forms until either C or O is exhausted. If O greater than C, the other products are oxidized, and excess O goes to H2O. If C greater than O, the other products are reduced, and excess C goes to HCN, C2H2, and a wide variety of more complicated organics. Ultimately, given time, the carbon would react all the way to graphite, but in practice the reactions are incomplete. The dark ejecta debris were probably composed in part of carbonaceous particles generated by the shocks. In a sense, the SL9 impacts performed the famous Miller-Urey experiment on a grand scale, with one result being the production of a lot of complex brown organic solids (called "tholins"). We use, a straightforward chemical kinetics model for the H, N, C, O, S system to follow the nonequilibrium chemistry behind the shocks. The model traces the evolving chemical composition of a parcel of gas by directly integrating the web of chemical reactions. Pressure and temperature histories of the parcels are patterned after those calculated by numerical hydrodynamic simulations of the ejecta plume. A given plume parcel is generally shocked twice; t.e a parcel shocked near the impact site is ejected at high velocity and is shocked again when it reenters the atmosphere. The final state of the gas depends mostly on the second shock, provided that the latter is hot enough. The chemical evidence is ambiguous, but most indications are that C greater than O in the shocked, reacting gas. Telltale signatures of abundant oxygen - SO2, SO, CO2, O2 - were not seen, while signatures of abundant carbon - CS, CS2, and HCN - were. On the other hand, abundant H2O would appear to require O greater than C, and two other observed sulfur species, S2 and OCS, appear to form more easily in a somewhat oxidized gas, presumable vaporized from the comet itself. Since on general principles one expects the -comet to have had a more-or-less cosmic composition, i.e. O greater than C, the production of CS, CS2, and HCN probably requires C greater than O in the shocked jovian air. This in turn implies that even the largest fragments released the bulk of their energy above the jovian water table, in all likelihood above 5 bars . There is no evidence in favor of the proposition that a significant amount of wet jovian air was shocked strongly enough to coax water to react; i.e. wet jovian air saw only temperatures significantly below 2000 K.

Zahnle, Kevin↗
DOE OSTI2025

A Continuous Galactic Line Source of Axions: The Remarkable Case of 23 Na

Here, we argue that $^{23}$Na is a potentially significant source of galactic axions. For temperatures $\gtrsim 7 \times 10^8$K -- characteristic of carbon burning in the massive progenitors of supernovae and ONeMg white dwarfs -- the 440 keV first excited state of $^{23}$Na is thermally populated, with its repeated decays pumping stellar energy into escaping axions. Odd-A nuclear abundances are typically very low in high-temperature stellar environments (or absent entirely due to burn-up). $^{23}$Na is an exception: $\approx 0.1 M_\odot$ of the isotope is synthesized during carbon burning then maintained at $\approx 10^9$K for times ranging up to $6 \times 10^4$y. Using MESA simulations, a galactic model, and sampling over progenitor masses, locations, and evolutionary stages, we find a continuous flux at earth of $\langle ϕ_a \rangle \approx 22$/cm$^2$s for $g^\mathrm{eff}_{aNN} = 10^{-9}$. Some fraction of these axions convert to photons as they propagate through the galactic magnetic field, producing a distinctive 440 keV line $γ$ ray detectable by all-sky detectors like the Compton Spectrometer and Imager (COSI). Assuming a 1$μ$G galactic magnetic field and a sufficiently light axion mass, we find that COSI will be able to probe $| g_{aNN}^\mathrm{eff} g_{a γγ} | \gtrsim1.8 \times 10^{-22}$ GeV$^{-1}$ at $3σ$ after two years of surveying.

Dark matter↗
DOE OSTI2023

Mass measurement of 27 P to constrain type-I x-ray burst models and validate the isobaric multiplet mass equation for the $A = 27, T = \frac{3}{2}$ isospin quartet

Background: Light curves are the primary observable of type-I x-ray bursts. Computational x-ray burst models must match simulations to observed light curves. Most of the error in simulated curves comes from uncertainties in rp process reaction rates, which can be reduced via precision mass measurements of neutron-deficient isotopes in the rp process path. Purpose: Perform a precise atomic mass measurement of 27 P. Use this new measurement to calculate rp process reaction rates and input these rates into an x-ray burst model to reduce simulated light curve uncertainty. Use the mass measurement of 27 P to validate the isobaric multiplet mass equation (IMME) for the A = 27 T = 3/2 isospin quartet which 27 P belongs to. Method: High-precision Penning trap mass spectrometry utilizing the time-of-flight ion cyclotron resonance technique was used to determine the atomic mass of 27 P. The MESA code (Modules for Experiments in Stellar Astrophysics) was then used to simulate x-ray bursts using a one-dimensional multizone model to produce updated light curves. Results: The mass excess of 27 P was measured to be –670.7(6) keV, a 14-fold precision increase over the mass reported in the 2020 Atomic Mass Evaluation (AME2020). The 26 Si(p, $γ$) 27 P– 27 P($γ$, p) 26 Si rate equilibrium has been determined to a higher precision based on the precision mass measurement of 27 P. x-ray burst light curves were produced with the MESA code using the new reaction rates. Changes in the mass of 27 P seem to have minimal effect on light curves, even in burster systems tailored to maximize impact. Conclusion: The mass of 27 P does not play a significant role in x-ray burst light curves. It is important to understand that more advanced models do not just provide more precise results, but often qualitatively different ones. This result brings us a step closer to being able to extract stellar parameters from individual x-ray burst observations. In addition, the IMME has been validated for the A = 27, T = 3/2 quartet. The normal quadratic form of the IMME using the latest data yields a reduced $χ$ 2 of 2.9. Finally, the cubic term required to generate an exact fit to the latest data matches theoretical attempts to predict this term.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRSDate not supplied

Flux Comparison of Master-8 and Ordem 3.1 Modelled Space Debris Population

With ESA’s Meteoroid And Space debris Terrestrial Environment Reference (MASTER-8) model and NASA’s Orbital Debris Engineering Model(ORDEM) 3.1, the two premier orbital debris engineering models have been officially released. The two models come with significant enhancements and now represent state-of-the-art orbital debris modelling for their respective agencies. Both models provide the community with estimates of the space debris environment from low Earth orbit (LEO) up to at least geostationary altitude. The MASTER population is an event-based simulation of all known events that generate debris and objects that are part of the U.S. Space Surveillance Network (SSN) catalog, which provides coverage of objects with diameters down to approximately 10cm in LEO and 1 m in geosynchronous Earth orbit (GEO). Different models are used to simulate the artificial objects and their orbit evolution over time. These models are called “sources” since they assign an origin to each individual object and consist of fragments, solid rocket motor (SRM) remainders, sodium-potassium(NaK) droplets, paintflakes, ejecta, and multi-layer insulation (MLI) fragments. The objects from each source are characterized by having individual release mechanisms, as well as orbital distributions, material composition, size, and mass distributions. Dedicated radar and telescope observation data is used to calibrate the model for objects larger than 1 cm in LEO and larger than 10 cm in GEO. For calibrating the small-sized objects, below 1 cm, impact data from returned surfaces are analyzed. Because the >1cm object population is dominated by fragments, the fragmentation event database was updated to include new events, as well as re-evaluate past events. Special attention was drawn to re-evaluating theFengyun-1C anti-satellite test from 2007 and Cosmos-Iridium collision event from 2009 since these events shape the fragment population because of their severity. After 2009, the two largest fragmentations in terms of number of tracked debris are the Briz-M explosion in 2012 and the NOAA-16explosion in 2015. In total, there are 261 confirmed fragmentations in the database up to November 2016.The baseline population for ORDEM 3.1 is based on the U.S. SSN catalog, and observational datasets from radar, in situ, and optical sources provide a foundation from which the model populations are statistically extrapolated to smaller size regions. These regions are not well-covered by the SSN catalog yet may pose the greatest threat to operational spacecraft. The NASA Standard Satellite Breakup Model is used to generate fragments greater than 1mm from collisions and explosions, and these fragment populations are scaled using ground-based radar data. Specific major debris-producing events, including the Fengyun-1C, Iridium 33, and Cosmos2251 debris clouds, and unique populations, such as NaK droplets, were re-examined, modelled, and added to the ORDEM environment separately. Optical measurement data is used to model the GEO population down to 10 cm. The debris environment is propagated using NASA’s LEO-to-GEO Environment Debris model, and future explosions of intact objects and collisions involving objects greater than 10 cm are assessed statistically. The environment from a few millimetres down to 10 𝜇m is modelled using a special degradation model where small particles are generated from intact spacecraft and rocket bodies, then the populations are scaled to fit in situ cratering data from Space Shuttle returned surfaces. Fragments smaller than 10 cm are differentiated based on material density categories, i.e., high-, medium-, and low-density, to better characterize the potential debris risk posed to upper stages and spacecraft. This paper will discuss the MASTER and ORDEM approaches for modelling populations and compare fluxes for specific orbits, including sun-synchronous, ISS-altitude, geosynchronous transfer, and GEO. In the end, a conclusion is drawn towards the importance of having multiple fundamentally different, yet validated, models to estimate the space debris population.

Andre Horstmann↗
DOE OSTI2023

Adjoint Waveform Tomography for Crustal and Upper Mantle Structure the Middle East and Southwest Asia for Improved Waveform Simulations Using Openly Available Broadband Data

We present a new model of radially anisotropic seismic wavespeeds for the crust and upper mantle of a broad region of the Middle East and Southwest Asia (MESWA) derived from adjoint waveform tomography. We inverted waveforms from 192 Global Centroid Moment Tensor earthquakes (MW 5.5-7.0) recorded by over 1000 openly available broadband seismic stations from permanent and temporary networks in the region. Spatial coverage of the available data is highly uneven due to earthquakes clustered along plate boundaries and sparse coverage of open seismic networks in the region. We considered three possible starting models: the SPiRaL global model (Simmons et al., 2021); MEC-1 (Kaviani et al., 2020); and CSEM2.0 (Noe et al., 2023). Because the SPiRaL model provides good fits to the observed waveforms measured by the time-bandwidth product of selected windows in several period bands, provides all the necessary parameters and covers the entire domain we used it for the starting model with the period band 50-100 seconds. Inversion iterations proceeded using time-frequency phase misfits in six stages and 54 total iterations reducing the minimum period to 30 seconds. Our final model, MESWA, provides improved waveform fits compared to the starting model for both the data used in the inversion and an independent validation data set of 66 events. Two metrics of waveform fit (the time-frequency phase misfit used in the optimization and normalized L2 misfit) were both reduced by nearly 60% for both data sets and MESWA provides significantly larger misfit reductions relative to the SPiRaL model than the MEC-1 or CSEM models. We also find that MESWA provides a larger time-bandwidth product of selected windows indicating that more information content of the observed waveforms is explained by MESWA than the other models. Our new model reveals tectonic features imaged by other studies and methods but in a new holistic model of shear and compressional wavespeeds (v S and v P , respectively) with anisotropy covering the crust and uppermost mantle of a larger domain. MESWA has smaller scale-length features and tends to sharpen some features relative to the SPiRaL starting model. Examples include: low crustal v S in the TurkishIranian Plateau, Zagros Mountains, Afghan Central Blocks and Sulaiman Fold Belt; low mantle vSfollowing divergent (Gulf of Aden, Red Sea) and transform (Dead Sea Fault) margins of the Arabian Plate; low and high v S in the mantle beneath the Arabian Shield and Platform, respectively. Low vS is imaged below Cenozoic volcanic centers of the Arabian Peninsula, the so-called Mecca-Madina-Nafud (MMN) Line. Positive anisotropy (v SH > v SV ) is inferred for asthenospheric depths across the region except where up/downwelling may influence fabric alignment (e.g. Afar, Red Sea, Arabian Shield). Elevated vS tracks Makran subduction under southeast Iran. MESWA resembles the SPiRaL model in its long-wavelength structure, but enhances shorter wavelengths features on the order of 200 km and smaller. The resulting model could be used for as a starting model for further improvements, say using waveforms from in-country seismic networks that are not openly available or smaller-scale studies targeting shorter period waveforms. The model also could be used for source characterization and moment tensor inversion to improve earthquake hazard studies and nuclear explosion monitoring.

58 GEOSCIENCES↗
DOE OSTI2025

Measurements of Gamow-Teller transitions from 59 Co via the 59 Co ⁢(𝑡, 3 He +𝛾) charge-exchange reaction and its application to the stellar electron-capture rates

Electron-capture reactions on iron-group nuclei play a crucial role in the late stages of massive star evolution. Since stellar evolution simulations depend on accurate electron-capture rates—which are highly sensitive to the detailed Gamow-Teller (GT) strength distributions—reliable theoretical models are essential. However, experimental data on GT strength distributions are scarce. High-resolution measurements are therefore vital for benchmarking and improving these theoretical calculations. To provide high-resolution data on Gamow-Teller strength distributions of iron-group nuclei and to compare these results with theoretical calculations within this mass region. Differential cross sections for the 59 Co ⁢(𝑡, 3 He)⁢ 59 Fe charge-exchange reaction at 115 MeV/u were measured using the S800 spectrometer. Furthermore, to resolve individual levels that are not distinguishable in the S800 particle singles data, coincident 𝛾 rays from the 59 Fe residual nucleus were detected by using the Gamma-Ray Energy Tracking In-beam Nuclear Array 𝛾-ray tracking array. Here, the Gamow-Teller transition strength distribution from the ground state of 59 Co to 59 Fe was extracted up to an excitation energy of 10 MeV. Additionally, transition strengths for several low-lying states were determined from coincident 𝛾-ray measurements. Electron-capture rates calculated using the present data indicate that these low-lying states contribute significantly to the overall rates in relevant stellar environments. The experimental results show reasonable agreement with theoretical predictions based on both shell-model and projected shell-model calculations. High-resolution data on Gamow-Teller strength distributions—particularly for individual low-lying states—are essential for accurately determining electron-capture rates in iron-group nuclei. Coincident 𝛾-ray measurements provide a powerful tool for obtaining such detailed information. While the present work demonstrates that shell-model calculations successfully reproduce the experimental results, such comparisons are scarce and more experimental data are desirable.

59 ≤ A ≤ 89↗
DOE OSTI2026

Direct cross section measurement of 102 Pd ⁢(𝛾,𝑝) and 102 Pd ⁢(𝛾,𝛼) for the astrophysical 𝑝 process

Background: A handful of neutron-deficient stable nuclei, known as the “p nuclei,” cannot be produced through astrophysical neutron capture processes. Instead, some of these nuclei are proposed to be produced by 𝛾-induced reactions on existing r- and s-process seeds. The specific astrophysical site or sites are not yet identified, however, with uncertainties in the cross sections of these 𝛾-induced reactions playing a role. Databases of reaction rates for astrophysical simulations often rely on theoretical statistical model calculations, such as Hauser-Feshbach, for rates where no experimental information is known. However, reasonable variations in the choice of parametrizations of various nuclear properties can create order-of-magnitude variations in the final predicted cross sections and reaction rates, which are then propagated through the models to the predicted final abundances. Purpose: To better constrain these statistical model calculations and ultimately reduce the uncertainties from the nuclear physics on our understanding of the p nuclei, a measurement of the cross sections of 𝛾-induced reactions on the p-nucleus 102 Pd was undertaken. This work represents the first measurement of its kind, using segmented silicon detectors to measure prompt charged particle emission from 𝛾-induced reactions. Methods: Quasimonoenergetic gamma beams from the High Intensity 𝛾 Source facility bombarded an enriched 102 Pd target. A segmented silicon array was arranged to detect the particles emitted from (𝛾,𝑝) and (𝛾,𝛼) reactions. Results: Reaction cross sections were deduced at multiple 𝛾-beam energies between 10 and 19 MeV, and compared to statistical model calculations using talys-1.96. The 102 Pd ⁢(𝛾,𝑝)⁢ 101 Rh reaction cross section was reasonably well reproduced by a subset of photon strength functions and level densities, though the strength to the ground state of 101 Rh was underestimated at higher incident gamma energies. The 102 Pd ⁢(𝛾,𝛼)⁢ 98 Ru was in general overpredicted by the various alpha-nucleus optical model potentials. Conclusions: While the theoretical cross sections used to model the (𝛾,𝑝) reactions for the p process may be reasonable, a more careful approach is needed in the case of (𝛾,𝛼). Further work to probe gamma-induced reaction cross sections at and near the p nuclei is warranted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗