Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geometric mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

On the effect of flux-surface shaping on trapped-electron modes in quasi-helically symmetric stellarators

Using a novel optimization procedure, it has been shown that the Helically Symmetric eXperiment stellarator can be optimized for reduced trapped-electron-mode (TEM) instability [Gerard et al., Nucl. Fusion 63, (2023) 056004]. Presently, with a set of 563 experimental candidate configurations, gyrokinetic simulations are performed to investigate the efficacy of available energy EA, quasi-helical symmetry, and flux-surface shaping parameters as metrics for TEM stabilization. It is found that lower values of EA correlate with reduced growth rates, but only when separate flux-surface shaping regimes are considered. Moreover, configurations with improved quasi-helical symmetry demonstrate a similar reduction in growth rates and less scatter compared to EA. Regarding flux-surface shaping, a set of helical shaping parameters is introduced that show increased elongation is strongly correlated with reduced TEM growth rates, however, only when the quasi-helical symmetry is preserved. Using a newly derived velocity-space-averaged TEM resonance operator, these trends are analyzed to provide insights into the physical mechanism of the observed stabilization. For elongation, stabilization is attributed to geometric effects that reduce the destabilizing particle drifts across the magnetic field. Regarding quasi-helical symmetry, the TEM resonance in the maximally resonant trapping well is shown to increase as the quasi-helical symmetry is broken, and breaking quasi-helical symmetry increases the prevalence of highly resonant trapping wells. While these results demonstrate the limitations of using any single metric as a linear TEM proxy, it is shown that quasi-helical symmetry and plasma elongation are highly effective metrics for reducing TEM growth rates in helical equilibria.

Physics↗
DOE OSTI2023

Coexistence of single-particle and collective excitation in Ni 61

Here, the high-spin states in 61 Ni have been studied using the fusion evaporation reaction, 50 Ti( 14 C, 3n) 61 Ni at an incident beam energy of 40 MeV. A Compton suppressed multi-HPGe detector setup, consisting of six clover detectors and three single-crystal HPGe detectors, was used to detect the de-exciting $\gamma$ rays from the excited states. The level scheme has been extended up to an excitation energy of 12.8 MeV and a tentative J π =35/2 + . The low-lying negative parity levels are found to be generated by single-particle excitation within the fp shell and also excitations to the g 9/2 orbitals as explained well with shell model calculations using the GXPF1Br+V MU (modified) interaction. Two rotational structures of regular E2 sequences with small to moderate axial deformation have been established at higher excitation energy. Most interestingly, two sequences of M1 transitions are reported for the first time and described as magnetic rotational bands. The shears mechanism for both the bands can be described satisfactorily by the geometrical model. The shell model calculation involving the cross shell excitation beyond the fp shell well reproduce the M1 and E2 sequences. The shell model predicted B(M1) values for the magnetic rotational band B1 show the decreasing trend with spin as expected with closing of the shears.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1974

Geometric distortions of autocollimation type scanners

One criterion of image quality is its geometric similarity to the control test. The ability of television, phototelevision, phototelegraphic, and other systems to transmit geometrically similar images is characterized by the geometric distortion coefficient. Linear distortions result from the inaccuracy of scanning mechanism element assembly, and distortions can be minimized during adjustment operations or may be easily compensated during image reception. Brief descriptions are given of the possible sources of nonlinear distortions which arise in these devices due to the scanning mechanism, objective distortion, or the nodding mirror.

Narayeva, M. K.↗
NASA NTRS1992

Integrated multidisciplinary analysis of segmented reflector telescopes

The present multidisciplinary telescope-analysis approach, which encompasses thermal, structural, control and optical considerations, is illustrated for the case of an IR telescope in LEO; attention is given to end-to-end evaluations of the effects of mechanical disturbances and thermal gradients in measures of optical performance. Both geometric ray-tracing and surface-to-surface diffraction approximations are used in the telescope's optical model. Also noted is the role played by NASA-JPL's Integrated Modeling of Advanced Optical Systems computation tool, in view of numerical samples.

Briggs, Hugh C.↗
NASA NTRS2005

Evolutionary optimization of a Genetically Refined Truss

Structural optimization is a field of research that has experienced noteworthy growth for many years. Researchers in this area have developed optimization tools to successfully design and model structures, typically minimizing mass while maintaining certain deflection and stress constraints. Numerous optimization studies have been performed to minimize mass, deflection and stress on a benchmark cantilever truss problem. Predominantly traditional optimization theory is applied to this problem. The cross-sectional area of each member is optimized to minimize the aforementioned objectives. This paper will present a structural optimization technique that has been previously applied to compliant mechanism design. This technique demonstrates a method that combines topology optimization, geometric refinement, finite element analysis, and two forms of evolutionary computation: Genetic Algorithms and Differential Evolution to successfully optimize a benchmark structural optimization problem. An non-traditional solution to the benchmark problem is presented in this paper, specifically a geometrically refined topological solution. The design process begins with an alternate control mesh formulation, multilevel geometric smoothing operation, and an elastostatic structural analysis. The design process is wrapped in an evolutionary computing optimization toolset.

Hull, Patrick V.↗
NASA NTRSDate not supplied

Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components

Metal additive manufacturing (AM) is a generic term that captures a variety of fabrication techniques. Each of these manufacturing process has unique advantages, applications for use, and challenges. The most common AM processes in use include Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) as well as many solid state processes. While detailed research has been conducted among many of the processes including parameters and material properties, navigating which processes are best to select is difficult as it is based on component requirements. The focus of this presentation is to provide an overview of considerations for each of metal AM process selection for aerospace components based on various attributes. These attributes include geometric considerations, metallurgical characteristics, cost basis, post-processing and maturity of the processes. The data for these trade selections are based on studies that NASA as performed internally and with academic and industry partners. These studies include multiple AM build experiments to evaluate (1) geometric variations and constraints within the processes, (2) alloy characterization and mechanical testing, (3) pathfinder component development and hotfire evaluations, and (4) certification approaches. This presentation summarizes these results and meant to introduce various considerations when designing a metal AM component.

Additive Manufacturing↗
NASA NTRSDate not supplied

Metal Additive Manufacturing Process Selection and Development for Propulsion Components

Metal additive manufacturing (AM) is a generic term that captures a variety of fabrication processes. Each of these manufacturing process has unique advantages and challenges for use in aerospace propulsion applications. The most commonly used AM processes include Powder Bed Fusion (PBF), Directed Energy Deposition (DED), and solid-state processes as in Cold Spray, Ultrasonic Additive Manufacturing, and Additive Friction Stir Deposition. While detailed research has been conducted among many of the AM processes to mature processing parameters and material properties, navigating which processes are best to select is difficult as it is based on specific component requirements. The focus of this presentation is to provide an overview of considerations for each of metal AM process selection for aerospace components based on various key attributes. These key attributes include geometric considerations, metallurgical characteristics, cost basis, post-processing and maturity of the processes. The data for these trade selections are based on studies that NASA as performed internally and with academic and industry partners. These studies include multiple AM build experiments to evaluate (1) geometric variations and constraints within the processes, (2) alloy characterization and mechanical testing, (3) pathfinder component development and hot-fire evaluations, and (4) certification approaches. This presentation summarizes these results and is meant to introduce specific examples which show what to consider when designing a metal AM component for aerospace propulsion applications.

Additive Manufacturing↗
NASA NTRSDate not supplied

Metal Additive Manufacturing Process Selection and Development Lifecycle for Propulsion Components

Metal additive manufacturing (AM) is a generic term that captures a variety of fabrication processes. Each of these manufacturing process has unique advantages and challenges for use in aerospace propulsion applications. The most commonly used AM processes include Powder Bed Fusion (PBF), Directed Energy Deposition (DED), and solid-state processes as in Cold Spray, Ultrasonic Additive Manufacturing, and Additive Friction Stir Deposition. While detailed research has been conducted among many of the AM processes to mature processing parameters and material properties, navigating which processes are best to select is difficult as it is based on specific component requirements. The focus of this presentation is to provide an overview of considerations for each of metal AM process selection for aerospace components based on various key attributes. These key attributes include geometric considerations, metallurgical characteristics, cost basis, post-processing and maturity of the processes. The data for these trade selections are based on studies that NASA as performed internally and with academic and industry partners. These studies include multiple AM build experiments to evaluate (1) geometric variations and constraints within the processes, (2) alloy characterization and mechanical testing, (3) pathfinder component development and hot-fire evaluations, and (4) certification approaches. This presentation summarizes these results and is meant to introduce specific examples which show what to consider when designing a metal AM component for aerospace propulsion applications.

Paul Gradl↗
NASA NTRS1981

UTD analysis of electromagnetic scattering by flat structures

The different scattering mechanisms that contribute to the radar cross of finite flat plates were identified and analyzed. The geometrical theory of diffraction, the equivalent current and the corner diffraction are used for this study. A study of the cross polarized field for a monopole mounted on a plate is presented, using novel edge wave mechanism in the analysis. The results are compared with moment method solutions as well as measured data.

Sikta, F. A.↗
DOE OSTI2021

Transient Deformation in Additively Manufactured 316L Stainless Steel Lattices Characterized with in-situ X-ray Phase Contrast Imaging: The Complete Dataset for Three Geometrical Lattices

Metallic lattice structures are being considered for shock mitigation applications due to their superior mechanical properties, energy absorption capability and lightweight characteristics inherent of the additive manufacturing process. In this study, shock compression experiments coupled to x-ray phase contrast imaging (PCI) were conducted on 316L stainless steel lattices. Meso-scale simulations incorporating the as-built lattice structure characterized by computed tomography were used to simulate PCI radiographs in CTH for direct comparison to experimental data. The methodology presented here offers robust validation for constitutive properties to further our understanding of lattice compaction at application-relevant strain rates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fundamental Investigations into the Properties and Performance of Advanced Materials

Intelligent engineering designs require an accurate understanding of material behavior, since any uncertainties or gaps in knowledge must be counterbalanced with heightened factors of safety, leading to overdesign. Therefore, building better structures and pushing the performance of new components requires an improved understanding of the thermomechanical response of advanced materials under service conditions. This dissertation provides fundamental investigations of several advanced materials: thermoset polymers, a common matrix material for fiber-reinforced composites and nanocomposites; aluminum alloy 7075-T6 (AA7075-T6), a high-performance aerospace material; and ceramic matrix composites (CMCs), an advanced composite for extreme-temperature applications. To understand matrix interactions with various interfaces and nanoinclusions at their fundamental scale, the properties of thermoset polymers are studied at the atomistic scale. An improved proximity-based molecular dynamics (MD) technique for modeling the crosslinking of thermoset polymers is carefully established, enabling realistic curing simulations through its ability to dynamically and probabilistically perform complex topology transformations. The proximity-based MD curing methodology is then used to explore damage initiation and the local anisotropic evolution of mechanical properties in thermoset polymers under uniaxial tension with an emphasis on changes in stiffness through a series of tensile loading, unloading, and reloading experiments. Aluminum alloys in aerospace applications often require a fatigue life of over 109 cycles, which is well over ii the number of cycles that can be practically tested using conventional fatigue testing equipment. In order to study these high-life regimes, a detailed ultrasonic cycle fatigue study is presented for AA7075-T6 under fully reversed tension-compression loading. The geometric sensitivity, frequency effects, size effects, surface roughness effects, and the corresponding failure mechanisms for ultrasonic fatigue across different fatigue regimes are investigated. Finally, because CMCs are utilized in extreme environments, oxidation plays an important role in their degradation. A multiphysics modeling methodology is thus developed to address the complex coupling between oxidation, mechanical stress, and oxygen diffusion in heterogeneous carbon fiber-reinforced CMC microstructures.

Schichtel, Jacob J.↗
DOE OSTI2021

Multi-scale Coupled Processes Modeling of Fractures as Porous, Interfacial and Granular Systems from Rock Images with the Numerical Manifold Method

Abstract The greatest challenges of rigorously modeling coupled hydro-mechanical processes in fractured rocks at different scales are associated with computational geometry. In addition, selections of continuous or discontinuous models, physical laws, and coupling priorities at different scales based on different geometric features determine the applicability of a numerical model for a certain type of problem. In this study, we present our multi-scale modeling capabilities that have been developed based on the numerical manifold method for analyzing coupled hydro-mechanical processes in fractured rocks. Based on their geometric features, the fractures are modeled as continua—finite-thickness porous zones, and discontinua—discontinuous interfaces and microscale asperities and granular systems. Different governing equations, physical laws, coupling priorities, and approaches for addressing fracture intersections and shearing are then applied to describe these. We applied these models to simulate coupled processes in fractured rocks using realistic geometry obtained from rock images at different scales. We first calculated shearing of a single fracture with different models and demonstrated the impacts of asperities on shearing. We then applied the continuous and discontinuous models to simulate a network of rough fractures, demonstrating that contact dynamics contribute significantly to the geometric, multi-physical evolution of systems where rough fractures are not mineral filled. For a discrete fracture network, our coupled processes modeling demonstrates that shearing of the discrete fractures can have a major impact on stress and pore pressure distribution. Lastly, we applied the discontinuous granular model to simulate evolution of a complex granular system with a deformation band, demonstrating that the deformation band can dominate contact dynamics, the structural and the stress evolution of the granular system.

58 GEOSCIENCES↗
DOE OSTI2021

New Mechanism for Yield Point Phenomena

Yield point phenomena (YPP) are widely attributed to discrete dislocation locking by solute atmospheres. An alternate YPP mechanism was recently suggested by simulations of Ta single crystals without any influence of solutes or discrete dislocations. The general meso-scale (GM) simulations consist of crystal plasticity (CP) plus accounting for internal stresses of geometrically necessary dislocation content. GM predicted the YPP while CP did not, suggesting a novel internal stress mechanism. The predicted YPP varied with crystal orientation and boundary conditions, contrary to expectations for a solute mechanism. The internal stress mechanism was probed by experimentally deforming oligocrystal Ta samples and comparing the results with independent GM simulations. Strain distributions of the experiments were observed with high-resolution digital image correlation. A YPP stress–strain response occurred in the 0–2% strain range in agreement with GM predictions. Shear bands appeared concurrent with the YPP stress–strain perturbation in agreement with GM predictions. At higher strains, the shear bands grew at progressively slower rates in agreement with GM predictions. It was concluded that the internal stress mechanism can account for the existence of YPP in a wide variety of materials including ones where interstitial-dislocation interactions and dislocation transient avalanches are improbable. Furthermore, the internal stress mechanism is a CP analog of various micro-scale mechanisms of discrete dislocations such as pile-up or bow-out. It may operate concurrently with strain aging, or either mechanism may operate alone. A suggestion was made for a future experiment to answer this question.

42 ENGINEERING↗
DOE OSTI2026

Dichotomy of flat bands in the van der Waals ferromagnet Fe 5 ⁢GeTe 2

Quantum materials with bands of narrow bandwidth near the Fermi level represent a promising platform for exploring a diverse range of fascinating physical phenomena, as the high density of states within the small energy window often enables the emergence of many-body physics. On one hand, flat bands can arise from strong Coulomb interactions that localize atomic orbitals. On the other hand, quantum destructive interference can quench the electronic kinetic energy. Although both have a narrow bandwidth, the two types of flat bands should exhibit very distinct spectral properties arising from their distinctive origins. So far, the two types of flat bands have only been realized in very different material settings and chemical environments, preventing a direct comparison. Here, in this study, we report the observation of the two types of flat bands within the same material system—an above-room-temperature van der Waals ferromagnet, Fe 5−x GeTe 2 , distinguishable by a switchable iron site order. The contrasting nature of the flat bands is also identified by the remarkably distinctive temperature evolution of the spectral features, indicating that one arises from electron correlations in the Fe(1) site-disordered phase, while the other geometrical frustration in the Fe(1) site-ordered phase. Our results therefore provide a direct juxtaposition of the distinct formation mechanism of flat bands in quantum materials and an avenue for understanding the distinctive roles flat bands play in the presence of magnetism, topology, and lattice geometrical frustration, utilizing sublattice ordering as a key control parameter.

Wu, Han [Rice Univ., Houston, TX (United States)] ↗
NASA NTRS1990

Changes in geometrical and biomechanical properties of immature male and female rat tibia

The differences in the geometry and mechanical properties of immature male and female rat tibiae were detailed in order to provide comparative data for spaceflight, exercise, or disease experiments that use immature rats as an animal model. The experiment focuses on the particularly rapid period of growth that occurs in the Sprague-Dawley rat between 40 and 60 d of age. Tibial length and middiaphysical cross-sectional data were analyzed for eight different groups of rats according to age and sex, and tibial mechanical properties were obtained via three-point bending tests to failure. Results indicate that, during the 15 d period of rapid growth, changes in rat tibial geometry are more important than changes in bone material properties for influencing the mechanical properties of the tibia. Male tibiae changed primarily in structural properties, while in the female rats major changes in mechanical properties of the tibia were only attributable to changes in the structural properties of the bone.

Zernicke, Ronald F.↗
DOE OSTI2020

Particle interspacing effects on the mechanical behavior of a Fe–TiB 2 metal matrix composite using FFT-based mesoscopic field dislocation mechanics

This paper presents an application to metal matrix composites (MMCs) of an enhanced elasto-viscoplastic Fast Fourier Transform (EVP-FFT) formulation coupled with a phenomenological continuum Mesoscale Field Dislocation Mechanics (MFDM) theory. Contrary to conventional crystal plasticity, which only accounts for plastic flow and hardening induced by statistically stored dislocations (SSDs), MFDM-EVP-FFT also describes the evolution of polarized geometrically necessary dislocation (GND) density and its effect on both plastic flow and hardening. Numerical results for a Fe–TiB 2 MMC made of a ferrite matrix (α-Fe) and elastic ceramic particles (TiB 2 ) are presented. Full-field simulations are performed using synthetic periodic unit cells representative of the MMC, with single-crystalline and polycrystalline matrix, for different particle interspacing distances. A strong dependence of the predicted equivalent stress, cumulated plastic strain and GND density fields with particle interspacing distance is observed, in contrast with conventional crystal plasticity. Correlations between these mechanical fields and microstructural features, and their influence on local and global mechanical behavior are examined for the different MMC microstructures.

42 ENGINEERING↗
DOE OSTI2020

3D micromechanical simulation of PBX composites

Previous research studied the constitutive response and interface strength of a bonded bicrystal system containing two HMX explosive grains bound with a HTPB polymer binder by performing FE simulations on real geometry imaged with micro Computed Tomography (µCT). The parameters generated from this past study were successfully applied to 2D mesoscale simulations of µCT imaged HMX-HTPB polycrystal samples. Presently, the mechanical response of PBXs containing a Nitro-Plasticized Estane (NPE) binder with similar microstructural geometry to the HMX-HTPB polycrystal samples were studied. Imaging of a HMX-NPE bicrystal sample allowed for simulation of the new material pairing. However, imaging using µCT techniques on the new polycrystal samples was difficult due to the decrease in contrast between the HMX grains and the NPE binder. Mesoscale polycrystal simulations utilizing a single µCT imaged microstructure were performed on a 3D representative volume element (RVE) comparing the delamination behavior and mechanical response of both HMX-HTPB and HMX-NPE PBXs. Furthermore, this technique shows the ability to virtually explore the mechanical response of a range of hypothetical materials that share common microstructural geometric characteristics in addition to studying numerically altered geometries.

36 MATERIALS SCIENCE↗
DOE OSTI2022

RCSB Protein Data Bank 1D3D module: displaying positional features on macromolecular assemblies

Mapping positional features from one-dimensional (1D) sequences onto three-dimensional (3D) structures of biological macromolecules is a powerful tool to show geometric patterns of biochemical annotations and provide a better understanding of the mechanisms underpinning protein and nucleic acid function at the atomic level. We present a new library designed to display fully customizable interactive views between 1D positional features of protein and/or nucleic acid sequences and their 3D structures as isolated chains or components of macromolecular assemblies.

59 BASIC BIOLOGICAL SCIENCES↗