SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Surface parameters of stannic oxide in powder, ceramic, and gel form by nitrogen adsorption techniques - analysis of adsorption isotherms
Temperature effects on strain in gels under constant stress
Separation of proteins in mollusk shells by gel filtration
Hydrogen slush and hydrogen gel systems optimization and vehicle application
Comprehensive analysis of the molecular weight distribution of raw and catalytic fast pyrolysis oils derived from biomass remains a key technical hurdle to understanding oil quality as it relates to downstream use and multiple methods may be necessary to accurately represent all components present. Here, we report the molecular weight distribution metrics of fast pyrolysis (FP) and catalytic fast pyrolysis (CFP) oils as determined by gel permeation chromatography (GPC) combined with UV-diode array (UV), differential refractive index (RI), and multi-angle laser light scattering (MALS) detection. The measured molar mass distributions revealed that FP oil consisted of a higher proportion of larger products relative to the low molecular weight products contained in the CFP oil. GPC/RI and UV methods showed FP oil to have higher weight-average molecular weight (Mw) and number-average molecular weight (Mn) than CFP oil based on elution time. However, GPC/MALS, determined the two oils to have similar overall molecular weight distribution metrics (Mw and Mn) and yielded values significantly higher than those determined by RI and UV detectors relative to external standards. Overall, the use of a multiple detection GPC method could enable a more accurate comparison and determination of true molecular weight metrics of bio-oils.
Abstract Thermoplastic elastomers (TPEs) based on styrenic block copolymers constitute excellent examples of self‐networking macromolecules that are employed in a wide range of contemporary technologies as molded parts. In such applications, these TPEs exist as dense (nonporous) films or other shapes. Here, it is first demonstrated that a series of commercial TPEs possessing comparable compositions can be electrospun from solution to form microfibers that are arranged into nonwoven mats that are breathable. An important consideration for microfiber formation is the copolymer molecular weight, which regulates i) the viscosity of the parent solution prior to electrospinning, ii) the ability of these copolymers to self‐assemble during electrospinning, iii) the microfiber morphology, and iv) the mechanical properties of the resultant microfibers. The addition of a midblock‐selective aliphatic oil to these TPEs yields thermoplastic elastomer gels (TPEGs), wherein the copolymer morphology and mechanical properties become highly composition‐tunable. Electrospinning TPEGs from a binary oil+solvent solution introduces a micelle inversion mechanism that begins with an oil‐rich micellar core and ends with a styrene‐rich micellar core, required for network stabilization, as the solvent dries during microfiber solidification. This work has implications for the production of controllably low‐modulus microfibrous materials possessing modestly improved toughness but exceptional extensibility and enhanced optical transparency.
The separator, an ionic permeable and electronic insulating membrane between cathode and anode, plays a crucial role in the electrochemical and safety performance of batteries. However, the commercial polyolefin separators not only suffer from inevitable thermal shrinkage at elevated temperature, but also fail to inhibit the hidden chemical crosstalk of reactive gases such as O 2 , leading to often reported thermal runaway (TR) and hence preventing large-scale implementation of high-energy-density lithium-ion batteries. Herein, a nanoporous non-shrinkage separator (GS-PI) was fabricated via a novel gel-stretching orientation approach to eliminate TR. In situ synchrotron small angle X-ray scattering during heating clearly showed that the as-prepared thin GS-PI separator exhibits superior mechanical tolerance at high temperature, thus effectively preventing internal short circuit. Meanwhile, the unique nanoporous structure design further blocks chemical crosstalk and the associated exothermic reactions. Accelerating Rate Calorimetry test revealed that the practical 1 Ah LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)/graphite pouch cell using GS-PI nanoporous separator show a maximum temperature rise (dT/dt max ) of only 3.7 °C s -1 compared to 131.6 °C s -1 in the case of Al 2 O 3 @PE macroporous separator. Furthermore, despite the reduced pore size, the GS-PI separator demonstrates better cycling stability than conventional Al 2 O 3 @PE separator at high temperature without sacrificing specific capacity and rate capability.
Polymer electrolytes have received tremendous interest in the development of solid-state batteries, but often fall short in one or more key properties required for practical applications. Herein, a rigid gel polymer electrolyte prepared by immobilizing a liquid mixture of a lithium salt and poly(ethylene glycol) dimethyl ether with only 8 wt% poly(2,2′-disulfonyl-4,4′-benzidine terephthalamide) (PBDT) is reported. The high charge density and rigid double helical structure of PBDT lead to formation of a nanofibrillar structure that endows this electrolyte with stronger mechanical properties, wider temperature window, and higher battery rate capability compared to all other poly(ethylene oxide) (PEO)-based electrolytes. The ion transport mechanism in this rigid polymer electrolyte is systematically studied using multiple complementary techniques. Li/LiFePO 4 cells show excellent capacity retention over long-term cycling, with thermal cycling reversibility between ambient temperature and elevated temperatures, demonstrating compelling potential for solid-state batteries targeting fast charging at high temperatures and slower discharging at ambient temperature.
The cubic‐garnet (Li 7 La 3 Zr 2 O 12 , LLZO) lithium–sulfur battery shows great promise in the pursuit of achieving high energy densities. The sulfur used in the cathodes is abundant, inexpensive, and possesses high specific capacity. In addition, LLZO displays excellent chemical stability with Li metal; however, the instabilities in the sulfur cathode/LLZO interface can lead to performance degradation that limits the development of these batteries. Therefore, it is critical to resolve these interfacial challenges to achieve stable cycling. Here, an innovative gel polymer buffer layer to stabilize the sulfur cathode/LLZO interface is created. Employing a thin bilayer LLZO (dense/porous) architecture as a solid electrolyte and significantly high sulfur loading of 5.2 mg cm −2 , stable cycling is achieved with a high initial discharge capacity of 1542 mAh g −1 (discharge current density of 0.87 mA cm −2 ) and an average discharge capacity of 1218 mAh g −1 (discharge current density of 1.74 mA cm −2 ) with 80% capacity retention over 265 cycles, at room temperature (22 °C) and without applied pressure. Achieving such stability with high sulfur loading is a major step in the development of potentially commercial garnet lithium–sulfur batteries.
Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.
Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.
Polymers with strong electron-withdrawing groups (e.g., cyano-containing polymers) are attractive for a wide range of applications due to their high dielectric constant and outstanding electrochemical stability. However, the polymerization of such monomers is difficult to control with trace of water affording instant reactions, and copolymerization with other monomers without using strong acid is even more challenging. The present study demonstrates a facile approach enabling efficient and controllable copolymerization of ethyl cyanoacrylate (ECA) without adding undesired additives, achieving mechanically robust and high ion-conduction gel polymer electrolyte (GPE) for safe and long cycle-life lithium-metal batteries (LMBs). The incorporated dual-lithium salts, i.e., lithium difluoro(oxalato)borate (LiDFOB) and lithium bis(trifluoromethanesulphonyl)imide (LiTFSI) not only facilitate radical polymerization of ECA monomers by suppressing their anionic polymerization, but also promote the formation of high-ionic conducting GPE. The incorporated methyl methacrylate (MMA) monomer accelerates the radical polymerization of ECA (confirmed by DFT calculations), achieving controlled copolymerization of ECA-based copolymers. Here, the mechanically robust polymer network made by the ECA copolymer enables LMBs with both LFP cathodes and high-voltage LCO cathodes (4.5 V) operatable at different temperatures with ultra-long cycle life at 1 C (capacity retention of 81.1 % and 83.8 %, respectively, over 1000 cycles).
Based on previous observations that a pressurized water treatment (PWT) prevented cracking of sol-gel microspheres, we investigated the effects of a PWT on microsphere crystallinity, density, and specific surface area (SSA). Results were used to determine how a PWT alters the properties of microspheres upon drying and heating. Microspheres with diameters near 100-200 µm were prepared with and without a PWT and measured using x-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption (BET), and pycnometry. Properties of air-dried microspheres processed with and without a PWT are compared. Additionally, the properties of microspheres processed using a PWT are reported after heating to 150 °C, 450 °C, 750 °C, 1050 °C, and 1350 °C. X-ray diffraction measurements indicate that the PWT step improves the crystallinity of air-dried microspheres. XRD data was also used to calculate crystallite size, which increases with higher heat treatment temperatures. TEM images support crystallite size calculations from XRD data and provide an indication of the range of crystallite sizes, particularly for samples processed at higher temperatures where crystallite sizes are too large for estimation using the Scherrer formula. Density and SSA measurements performed as a function of heat treatment temperature indicate that a PWT increases the density of air-dried microspheres, creates a pore network, and that significant densification occurs between 450 - 750 °C. These results may be used to inform decisions on internal gelation flowsheet parameters to optimize the microsphere formation and gelation step, prevent microsphere cracking, and produce microspheres suitable for subsequent coating operations or pressing into pellets.
Despite of several decades lasting extensive research of bioactive and bioresorbable glasses the systematic parametrization and determination of the key factors affecting porosity and thermomechanical characteristics still remains challenging. Here, we present silica-phosphate glasses, with the composition 70SiO 2 - 20P 2 O 5 - (10-x)CaO-xTiO 2 (mol%; x = 0, 2.5, 5, and 7.5), prepared by sol -gel method and reinforced by titanium dioxide via titanium isopropoxide (TTIP) incorporation which demonstrated tunable variation of porosity from micro-to macro -region and superb mechanical integrity during the calcination process. The presence of 7.5 mol% TiO 2 promotes dimensional stability up to 1000°C as investigated by thermomechanical analysis. The XRD showed the dominant presence of silicon phosphate [Si(P 2 O 7 )], titanium phosphate [Ti(P 2 O 7 )] and calcium phosphates [β-Ca(P 2 O 6 ) and γ- Ca 2 (P 2 O 7 )]. The effect of TiO 2 doping on the multiscale morphology and porosity was investigated by means of SEM, MIP, μCT, N 2 adsorption and USAXS/SAXS. Increasing TiO 2 content leads to the formation of open porosity up to 70vol% and drives the formation of a refined interconnected macroporosity of 2-30 μm. In contrast, mesoporosity with a dominance of 3-6nm pores decreases in all samples with increasing TiO 2 content. USAXS/SAXS revealed an increase in primary particle size with increasing TiO 2 content which is in good agreement with the nitrogen physisorption analysis showing that microporosity decreases with increasing TiO2 content.
Covalent triazine framework (CTF)-based membranes have shown unique properties and wide applications in energy-related fields, but there is still no efficient strategy capable of affording CTF membranes functionalized with ionic moieties, which will bring extra merits and application possibilities. In this work, a robust CTF membrane with ionic functionalities was fabricated via a sol–gel approach promoted by a superacid (FSO 3 H). The CTF skeleton was constructed via the trimerization of cyano groups in the monomer, and piperazine moieties were introduced as reactive sites for the formation of ammonium cations coupled with FSO 3 – anions within the backbone. The obtained transparent and red protonated polymeric CTF-based membrane (PP-CTF) exhibited significant absorption at 646 nm in the solid-state ultraviolet–visible diffuse reflectance spectrum. Comparatively, the neutralized deprotonated counterparts turned to yellow color with a significant blueshift absorption to 492 nm. The theoretical calculation demonstrated that PP-CTF and deprotonated polymeric CTF membrane (DP-CTF) were stable with AB-stacking mode, and PP-CTF had a smaller band gap (0.90 eV) than that of DP-CTF (2.17 eV). The significant optical absorption and emission behavior change of PP-CTF and its robust chemical stability endowed it with the capability to act as pH indicators. The synthetic pathway developed in this work and the performance of the resultant ionic membrane opens new opportunities in the aspects of membrane design, fabrication, and application.
The self-assembly of block copolymers offers opportunities for the facile organization and templating of inorganic nanomaterials. Here, we describe a morphology map for a poly(methyl methacrylate)-b-poly(n-butyl acrylate)-b-poly(methyl methacrylate) (PMMA-b-PnBA-b-PMMA) block copolymer/polycarbosilane system that allows for tunable control over nanoscale micelle geometry via manipulation of the preceramic polymer content. We produced gels with spherical, wormlike, and bicontinuous morphologies, which were processed to create silicon carbide-based ceramic structures with tunable nanoscale porosities. The role of the constituent polymers in influencing the structure and rheology of this system is discussed. The PMMA-b-PnBA-b-PMMA block copolymer/preceramic polymer system offers a number of advantages including: (i) commercial availability, (ii) rapid self-assembly kinetics, and (iii) successful conversion of the self-assembled nanostructure to ceramic via pyrolysis. Finally, this system may be useful for catalytic, structural, or thermal applications in both industrial and academic settings because of its ease of use and relatively inexpensive reagents.
The structure of unconventional complex coacervates, such as polymer-nonpolymer complex coacervates, remains less investigated than that of the conventional coacervates formed between oppositely charged polyelectrolytes with symmetric charge species. Yet, their microscopic structural organization is important to further elucidate the mechanism of liquid-liquid-phase separation processes upon complexation. In this work, we characterize the microstructural organization of complex coacervates formed between inorganic polyoxometalate (POM) and polyzwitterion by small-angle X-ray scattering (SAXS) with in situ temperature and shear control. Furthermore, despite the apparent transparent and homogeneous morphology of dense coacervates as observed by optical microscopy, our previous results (Macromolecules 2018, 51, 22, 9405-9411) suggest that dense polyzwitterion-POM coacervates exhibit critical-gel-like networks containing both complex-poor region (mesh pore) and complex-rich region (connective network). SAXS results as reported in this work support that the complex-rich region is actually in the form of loosely packed POM aggregates linked by polyzwitterion, designated as complex particles. The structure of aggregating complex particles is further examined against varied composition and salt concentrations, temperature, and shear, thanks to the high X-ray scattering contrast of POMs from that of other components in the coacervates. The complex particles in the dense coacervates appear to grow with more tightly packed POM aggregates with increasing POM-to-polyzwitterion concentration ratio, in contrast to more loosely packed POM aggregates with decreasing salt concentration. Conversely, increasing temperature could result in smaller complex particles containing more loosely packed POM aggregates, consistent with temperature-dependent viscoelasticity of dense coacervates. Furthermore, such POM-based hybrid dense coacervates exhibit intriguing strain-hardening behavior, resulting from shear-enhanced POM packing inside the complex particles. Distinct from the shear-thinning behavior of most conventional crosslinked polymeric networks, the strain-hardening property combined with thermal- and salt-responsive characteristics of polyzwitterion-POM coacervates could broaden the applications of hybrid organic-inorganic macroion coacervates as smart functional materials working under extreme environmental conditions.
We undertook a detailed rheological investigation to evaluate the kinetic parameters of the forward and reverse Diels–Alder (DA) reactions of a model network cross-linked using a furan prepolymer and a common aromatic bismaleimide. At high temperature where the Winter–Chambon’s criterion of frequency-independence was more applicable, a multiwave technique permitted van’t Hoff analysis and calculation of the reaction thermodynamic parameters, specifically the enthalpy and entropy of the reaction: ΔH° = –38.3 ± 5.2 kJ mol –1 and ΔS° = –94.3 ± 13.4 J mol –1 . At mild temperatures where the G'–G" crossover point is experimentally convenient to measure gelation, isothermal tests were used to obtain reasonable fDA kinetic parameters from Eyring analysis such as the apparent activation enthalpy and entropy of ΔH$^{‡}_{fDA}$ = 76.8 ± 6.9 kJ mol –1 and ΔS$^{‡}_{fDA}$= –82.8 ± 22.2 J mol –1 K –1 . Comparable rheokinetic methods include cross-linking density measurements and stress relaxation tests to calculate effective kinetics, whereas the critical gel conversion was consistently applied here. As a result, rate data are fitted with the Arrhenius equation for comparison purposes and the Eyring equation to demonstrate its broader utility.