Results for “future vision” — Page 13

NASA NTRS2004

Advanced Life Support Systems

This presentation is planned to be a 10-15 minute "catalytic" focused presentation to be scheduled during one of the working sessions at the TIM. This presentation will focus on Advanced Life Support technologies key to future human Space Exploration as outlined in the Vision, and will include basic requirements, assessment of the state-of-the-art and gaps, and include specific technology metrics. The presentation will be technical in character, lean heavily on data in published ALS documents (such as the Baseline Values and Assumptions Document) but not provide specific technical details or build to information on any technology mentioned (thus the presentation will be benign from an export control and a new technology perspective). The topics presented will be focused on the following elements of Advanced Life Support: air revitalization, water recovery, waste management, thermal control, habitation systems, food systems and bioregenerative life support.

Barta, Daniel J.↗

NASA NTRS2006

Multiphase Flow Technology Impacts on Thermal Control Systems for Exploration

The Two-Phase Flow Facility (TPHIFFy) Project focused on bridging the critical knowledge gap by developing and demonstrating critical multiphase fluid products for advanced life support, thermal management and power conversion systems that are required to enable the Vision for Space Exploration. Safety and reliability of future systems will be enhanced by addressing critical microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability. The project included concept development, normal gravity testing, and reduced gravity aircraft flight campaigns, in preparation for the development of a space flight experiment implementation. Data will be utilized to develop predictive models that could be used for system design and operation. A single fluid, two-phase closed thermodynamic loop test bed was designed, assembled and tested. The major components in this test bed include: a boiler, a condenser, a phase separator and a circulating pump. The test loop was instrumented with flow meters, thermocouples, pressure transducers and both high speed and normal speed video cameras. A low boiling point surrogate fluid, FC-72, was selected based on scaling analyses using preliminary designs for operational systems. Preliminary results are presented which include flow regime transitions and some observations regarding system stability.

McQuillen, John↗

NASA NTRS2006

Centaur Test Bed (CTB) for Cryogenic Fluid Management

Future missions such as NASA s space exploration vision and DOD satellite servicing will require significant increases in the understanding and knowledge of space based cryogenic fluid management (CFM), including the transfer and storage of cryogenic fluids. Existing CFM capabilities are based on flight of upper stage cryogenic vehicles, scientific dewars, a few dedicated flight demonstrations and ground testing. This current capability is inadequate to support development of the CEV cryogenic propulsion system, other aspects of robust space exploration or the refueling of satellite cryo propulsion systems with reasonable risk. In addition, these technologies can provide significant performance increases for missions beyond low-earth orbit to enable manned missions to the Moon and beyond. The Centaur upper-stage vehicle can provide a low cost test platform for performing numerous flight demonstrations of the full breadth of required CFM technologies to support CEV development. These flight demonstrations can be performed as secondary mission objectives using excess LH2 and/or LO2 from the main vehicle propellant tanks following primary spacecraft separation at minimal cost and risk.

Sakla, Steven↗

NASA NTRS2009

Evaluation of Equivalent Vision Technologies for Supersonic Aircraft Operations

Twenty-four air transport-rated pilots participated as subjects in a fixed-based simulation experiment to evaluate the use of Synthetic/Enhanced Vision (S/EV) and eXternal Vision System (XVS) technologies as enabling technologies for future all-weather operations. Three head-up flight display concepts were evaluated a monochromatic, collimated Head-up Display (HUD) and a color, non-collimated XVS display with a field-of-view (FOV) equal to and also, one significantly larger than the collimated HUD. Approach, landing, departure, and surface operations were conducted. Additionally, the apparent angle-of-attack (AOA) was varied (high/low) to investigate the vertical field-of-view display requirements and peripheral, side window visibility was experimentally varied. The data showed that lateral approach tracking performance and lateral landing position were excellent regardless of the display type and AOA condition being evaluated or whether or not there were peripheral cues in the side windows. Longitudinal touchdown and glideslope tracking were affected by the display concepts. Larger FOV display concepts showed improved longitudinal touchdown control, superior glideslope tracking, significant situation awareness improvements and workload reductions compared to smaller FOV display concepts.

Kramer, Lynda J.↗

NASA NTRS2012

Self-Cleaning Particulate Prefilter Media

A long-term space mission requires efficient air revitalization performance to sustain the crew. Prefilter and particulate air filter media are susceptible to rapid fouling that adversely affects their performance and can lead to catastrophic failure of the air revitalization system, which may result in mission failure. For a long-term voyage, it is impractical to carry replacement particulate prefilter and filter modules due to the usual limitations in size, volume, and weight. The only solution to this problem is to reagentlessly regenerate prefilter and filter media in place. A method was developed to modify the particulate prefilter media to allow them to regenerate reagentlessly, and in place, by the application of modest thermocycled transverse or reversed airflows. The innovation may allow NASA to close the breathing air loop more efficiently, thereby sustaining the vision for manned space exploration missions of the future. A novel, self-cleaning coatings technology was developed for air filter media surfaces that allows reagentless in-place regeneration of the surface. The technology grafts thermoresponsive and nonspecific adhesion minimizing polymer nanolayer brush coatings from the prefilter media. These polymer nanolayer brush architectures can be triggered to contract and expand to generate a "pushing-off" force by the simple application of modestly thermocycled (i.e. cycling from ambient cabin temperature to 40 C) air streams. The nonspecific adhesion-minimizing properties of the coatings do not allow the particulate foulants to adhere strongly to the filter media, and thermocycled air streams applied to the media allow easy detachment and in-place regeneration of the media with minimal impact in system downtime or astronaut involvement in overseeing the process.

Weber, Olivia↗

NASA NTRSDate not supplied

Mineralogy and Spectroscopy of Mount Etna Lava Flows as an Analogue to Venus

Reports of geologically recent volcanism at Venus [1–3] raise the question of whether Venus is actively resurfacing. Observing the venusian surface is difficult due to the planet’s thick, relatively opaque atmosphere, but emission from the surface is detectable via a few atmospheric windows in the near-infrared (NIR) around 1 μm [4]. Spectroscopy of rocks at these wavelengths varies due to its primary composition and the presence of secondary weathering products [2, 5, 6]. If degree of alteration can be tied to the spectroscopic response, then the weathering of the venusian surface can reveal its age and extent of recent volcanism [2, 7]. Mount Etna on Earth is a potential analogue to Venus that can aid our understanding. The composite volcano is currently active and exhibits a progression of dated lava flows with a range of textures (‘a‘¯a versus p¯ahoehoe flows) and degrees of alteration [8]. While not a perfect analogue due to differing weathering environments, Mount Etna represents a natural age progression of altered basaltic rock [8] that can provide a useful comparison to volcanic structures on Venus. Here we will determine if spectroscopy can determine the alteration state of these flows as a proxy for their age. Future missions to Venus such as VERITAS, En- Vision, and DAVINCI will observe the surface in NIR emissivity. Kirchhoff’s Law holds that e = 1−r, where e is the emissivity and r is the reflectance. NIR emissivity can be reliably calculated from reflectance measurements of rocks [9], so laboratory reflectance spectroscopy is useful to rapidly test potential Venus analogue materials.

Gabriel L. Eggers↗

NASA NTRSDate not supplied

The Science Discovery Engine: An Open Science Success Story

NASA is committed to building an inclusive open science community over the next decade and is championing the new Open-Source Science Initiative (OSSI) to foster that community. The OSSI is made up of a number of activities including the development of an empowering cyberinfrastructure to accelerate the time to actionable science. One component of the OSSI cyberinfrastructure is the Science Discovery Engine (SDE). The goal of the SDE is to enable the discovery of data, software and documentation across the five SMD divisions including Astrophysics, Biological and Physical Sciences, Earth Science, Heliophysics and Planetary Science. The SDE increases accessibility to the wealth of NASA’s open science data and information. In this presentation, we will present our collaborative work to date to build the SDE and our vision for empowering open source science in the future.

Kaylin Bugbee↗

NASA NTRS2023

NASA GRC ICME Schema for Materials Data Management: An Executive Summary

Integrated Computational Materials Engineering (ICME) has received a growing emphasis in attention due its potential impact on rapid material design, reduction in cost and time to market for new applications, and the promise of ‘fit-for-purpose’ materials coupled with recent advances in high performance computing and material characterization tools. However, for an organization to implement ICME practices for material discovery and design, a series of both technical and cultural challenges must be overcome to foster an environment that enables efficient, traceable, and predictive multiscale simulations of material behavior to enable virtual design of materials. In 2016, NASA sponsored a 2040 Vision study to define the potential 25-year future state required for integrated multiscale modeling of materials and systems to improve both the associated time and cost for aerospace and aeronautical innovation. The study envisions a cyber-physical-social ecosystem of experimentally validated computational models, tools, and techniques, along with the associated digital tapestry, that can enable rapid, optimized, ‘fit-for-purpose’ design of materials, components, and systems. A key requirement for such an ecosystem is the development of a robust information management system for materials across their full lifecycle, including material pedigree, experimental (real) and virtual (simulation) data, developed material models, and the implementation of models in engineering applications, such that process-structure-property-performance relationships can be established, thereby enabling the virtual design and optimization of materials. Such an information management system must be able to effectively capture: i) material information at each length scale; ii) test data and analysis; iii) associated material models; and iv) material and model deployment in engineering applications. These systems must also provide traceability between experimental and virtual representations of the material to ensure, when appropriate, the material digital twin is maintained. Additionally, this robust material information management system must be able to seamlessly connect with both commercial and an organization’s in-house software tools, be they analysis tools, other material databases, product lifecycle management (PLM) or simulation data management (SDM) tools, etc., such that automation of the design and analysis of a material across multiple length scales is possible. In this paper, an executive summary of the NASA GRC ICME Schema for materials information management is presented. The database best practices and schema design philosophy specifically for ICME materials data management and an overview description of each element in the schema is given, along with its associated role in an ICME workflow. Additionally, auxiliary tools that interact with the database and provide judicious automation with regards to importing, exporting, and analyzing materials data are presented. Such tools are critical to an ICME ecosystem, not only for their role in enabling optimization, but also in relieving users of tedious manual tasks, thus helping to promote adoption and combat the cultural challenges organizations face in enabling ICME.

Materials↗

NASA NTRS2005

Vision for Micro Technology Space Missions

It is exciting to contemplate the various space mission applications that Micro Electro Mechanical Systems (MEMS) technology could enable in the next 10-20 years. The primary objective of this chapter is to both stimulate ideas for MEMS technology infusion on future NASA space missions and to spur adoption of the MEMS technology in the minds of mission designers. This chapter is also intended to inform non-space oriented MEMS technologists, researchers and decision makers about the rich potential application set that future NASA Science and Exploration missions will provide. The motivation for this chapter is therefore to lead the reader down a path to identify and it is exciting to contemplate the various space mission applications that Micro Electro Mechanical Systems (MEMS) technology could enable in the next 10-20 years. The primary objective of this chapter is to both stimulate ideas for MEMS technology infusion on future NASA space missions and to spur adoption of the MEMS technology in the minds of mission designers. This chapter is also intended to inform non-space oriented MEMS technologists, researchers and decision makers about the rich potential application set that future NASA Science and Exploration missions will provide. The motivation for this chapter is therefore to lead the reader down a path to identify and consider potential long-term, perhaps disruptive or revolutionary, impacts that MEMS technology may have for future civilian space applications. A general discussion of the potential for MEMS in space applications is followed by a brief showcasing of a few selected examples of recent MEMS technology developments for future space missions. Using these recent developments as a point of departure, a vision is then presented of several areas where MEMS technology might eventually be exploited in future Science and Exploration mission applications. Lastly, as a stimulus for future research and development, this chapter summarizes a set of barriers to progress, design challenges and key issues that must be overcome in order for the community to move on, from the current nascent phase of developing and infusing MEMS technology into space missions, in order to achieve its full future potential.

Dennehy, Neil↗

NASA NTRSDate not supplied

The Potential of GEO Sounders for Numerical Weather Prediction

The future of Earth observations from space is currently being decided upon in the United States. To better understand the impacts of various configurations, the Global Modeling and Assimilation Office (GMAO) observing system simulation experiment (OSSE) framework has been utilized to examine the impact of various hyperspectral infrared sounder constellations from the perspective of global numerical weather prediction (NWP). With an emphasis on the proposed NOAA/NASA Geostationary eXtended Observations (GeoXO) Sounder (GXS), planned to launch in the mid-2030s, the NWP benefit of a global ring of geostationary sounders, consistent with the WMO’s 2040 vision is evaluated. In addition, considerations extend to the future of the Low Earth Orbit (LEO) sounder program with the loss of several existing instruments and plans for future missions ongoing. The GMAO OSSE framework has examined the potential complementarities of GEO and LEO sounders in weather prediction improvement. Overall, the inclusion of both GEO and LEO sounders produces the most beneficial impact on NWP for regional and global scales and the most accurate global weather forecasts as evaluated using several metrics, including hurricanes and the forecast sensitivity observation impact (FSOI).

Erica Mcgrath-Spangler↗

NASA NTRS2004

Exploration Requirements Development Utilizing the Strategy-to-Task-to-Technology Development Approach

The Vision for Space Exploration provides direction for the National Aeronautics and Space Administration to embark on a robust space exploration program that will advance the Nation s scientific, security, and economic interests. This plan calls for a progressive expansion of human capabilities beyond low earth orbit seeking to answer profound scientific and philosophical questions while responding to discoveries along the way. In addition, the Vision articulates the strategy for developing the revolutionary new technologies and capabilities required for the future exploration of the solar system. The National Aeronautics and Space Administration faces new challenges in successfully implementing the Vision. In order to implement a sustained and affordable exploration endeavor it is vital for NASA to do business differently. This paper provides an overview of the strategy-to-task-to-technology process being used by NASA s Exploration Systems Mission Directorate to develop the requirements and system acquisition details necessary for implementing a sustainable exploration vision.

Drake, Bret G.↗

NASA NTRSDate not supplied

The Adaptable and Resilient Safety System: The Human Factor in Future In-Time Aviation Safety Management Systems

In-time integrated safety management will be paramount for safely enabling the envisioned transformations of the future National Airspace System (NAS). The path for realizing the vision includes addressing the increasing need for advanced data analytics and fusion of aviation safety data, managed by human decision-makers. The paper describes safety management systems and its’ challenges, and how the concept of In-time Aviation Safety Management Systems addresses the need to ensure an adaptable and resilient future safety system in the envisioned transformed NAS. Finally, it discusses potential human factors challenges, including new human roles and responsibilities, new information and cognitive requirements, new intelligent technologies that change human-system interaction and coordination, and new design paradigms for human system integration and teaming.

L. Prinzel↗

NASA NTRSDate not supplied

The Adaptable and Resilient Safety System: The Human Factor in Future In-Time Aviation Safety Management Systems

In-time integrated safety management will be paramount for safely enabling the envisioned transformations of the future National Airspace System (NAS). The path for realizing the vision includes addressing the increasing need for advanced data analytics and fusion of aviation safety data, managed by human decision-makers. The paper describes safety management systems and its’ challenges, and how the concept of In-time Aviation Safety Management Systems addresses the need to ensure an adaptable and resilient future safety system in the envisioned transformed NAS. Finally, it discusses potential human factors challenges, including new human roles and responsibilities, new information and cognitive requirements, new intelligent technologies that change human-system interaction and coordination, and new design paradigms for human system integration and teaming.

Aviation Safety↗

NASA NTRSDate not supplied

Webinar on Urban Air Mobility Vision: Sky For All

The webinar will highlight the role UAM can play in future mobility improvements to enhance lives of people living in urban environments. In addition, challenges of integrating these vehicles into the current airspace will be discussed. NASA will present how these questions are being addressed from a US perspective.

Urban Air Mobility↗

NASA NTRSDate not supplied

Dynamic Anomaly Response and Integrated Analysis (DARIA): A Fault Investigation Toolset Supporting Earth-Independent Operations in Future Crewed Mars Missions

NASA's Moon to Mars Objectives outline a strategic vision for human spaceflight culminating in crewed missions to Mars. A critical component of this objective is the development of systems that are capable of being Earth-Independent Operated (EIO). A key aspect of EIO is the ability to rapidly detect, diagnose, and respond to anomalies in crew-supporting habitat and connected systems. To address this, the Dynamic Anomaly Response and Integrated Analysis (DARIA) architecture has been developed. DARIA incorporates a network of compact, wireless sensing devices called the System for Telemetry Amalgamation of Multimodal PrognosticS (STAMPS) for increased state awareness of EIO habitats. Able to perform on-the-fly data acquisition, STAMPS are connected to integrated anomaly data dashboards for crew visualization. DARIA is designed to seamlessly integrate into various off-world environments, including the International Space Station, Lunar Gateway, Artemis Base Camp, and future Mars habitats. By leveraging Commercial Off-The-Shelf (COTS) hardware, the NASA Internet of Things (NASA IoT) framework, and EIO fault detection methods, DARIA provides a cost-effective and adaptable solution for anomaly detection and response in EIO habitats.

Diagnostics↗

NASA NTRS2018

Reliable and Secure Surveillance, Communications and Navigation (RSCAN) for Unmanned Air Systems (UAS) in Controlled Airspace

The aviation industry faces a rapidly-emerging need for integrating Unmanned Air Systems (UAS) into the national airspace (NAS). This trend will present challenging questions for the safe operation of UAS in controlled and uncontrolled airspaces based on new Communications, Navigation and Surveillance (CNS) technologies. For example, can wireless communications data links provide the necessary capacity for accommodating ever increasing numbers of UAS worldwide? Does the communications network provide ample Internet Protocol (IP) address space to allow Air Traffic Control (ATC) to securely address each UAS? Can navigation and surveillance approaches assure safe route planning and safe separation of vehicles even in crowded skies?Under NASA contract NNA16BD84C, Boeing is developing an integrated CNS architecture to enable UAS operations in the NAS. Revolutionary and advanced CNS alternatives are needed to support UAS operations at all altitudes and in all airspaces, including both controlled and uncontrolled. These CNS alternatives must be reliable, redundant, always available, cyber-secure, and affordable for all types of vehicles including small UAS to large transport category aircraft. Our approach considers CNS requirements that address the range of UAS missions where they will be most beneficial and cost-effective.A cybersecure future UAS CNS architecture is needed to support the NASA vision for an Unmanned Air Traffic Management (UTM) system in uncontrolled airspace and a cooperative operation of manned and unmanned aircraft in the controlled global Air Traffic Management (ATM) system. The architecture must, therefore, support always-available and cyber secure operations. This paper presents UAS CNS architecture concepts for large UAS operating in the ATM system in controlled airspace. Future companion works will consider small UAS operating in the UTM system in uncontrolled airspace.

Ponchak, Denise S.↗

NASA NTRS2022

Application Table: A Bridge Connecting the Designing “With-The-Material” and “The-Material” Paradigms

Over the last few decades, advances in high-performance computing, new material characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. In 2016 NASA sponsored a 2040 Vision study (which appeared in 2018) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. The study envisions a cyber-physical-social ecosystem comprised of experimentally verified and validated (V & V) computational models, tools, and techniques, along with the associated digital tapestry, that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of “fit-for-purpose” materials, components, and systems. Consequently, the development of a robust information management system that incorporates (across the full life cycle) both experimental (real data) and virtual data resulting from the application of various simulation tools (at single or multiple length scales), therefore enabling the virtual design and optimization of materials throughout their processing – internal structure – property – performance envelope, has become critical. This need is also fueled by the demands for higher efficiency in material testing; consistency, quality, and traceability of data; product design; engineering analysis; as well as control of access to proprietary or sensitive information. This is particularly true when attempting to merge ICME practices with recent additive manufacturing technology which will enable production of the resulting 2040 Vision material and structural designs. At NASA Glenn Research Center we are exploring the future of material science through the use of novel characterization methodologies, high performance computing, and recently an emphasis on integrated computational materials engineering (ICME). Herein, recent efforts to incorporate an Application Table within NASA Glenn Research Center’s ICME Granta MI database is presented. The goal is to provide a place where material and structural application information/requirements can be linked so as to marry the “design the-material” and the “design-with-material” paradigms and thereby enable application-driven design and optimization of materials and structures by providing a central location that links material processing at various length scales to the application’s performance requirements. This paper discusses the specifics of this Application Table as well as best practices and key principles for the development of a robust materials information management system to enable the 2040 Vision integrated materials and structures ecosystem. Furthermore, it presents the intended role of the Application Table in the future of ICME design of “fit-for-purpose” materials, showing the need for a well-established framework that can successfully bridge the gap between the design “the material” and design “with-the-material” paradigms.

Materials↗

NASA NTRSDate not supplied

Application Table: A Bridge Connecting the Designing “With-the-Material” and “the-Material”

Over the last few decades, advances in high-performance computing, new material characterization methods, and, more recently, an emphasis on integrated computational materials engineering (ICME) have been a catalyst for multiscale modeling and simulation-based design of materials and structures in the aerospace industry. In 2016 NASA sponsored a 2040 Vision study (which appeared in 2018) to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. The study envisions a cyber-physical-social ecosystem comprised of experimentally verified and validated (V & V) computational models, tools, and techniques, along with the associated digital tapestry, that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of “fit-for-purpose” materials, components, and systems. Consequently, the development of a robust information management system that incorporates (across the full life cycle) both experimental (real data) and virtual data resulting from the application of various simulation tools (at single or multiple length scales), therefore enabling the virtual design and optimization of materials throughout their processing – internal structure – property – performance envelope, has become critical. This need is also fueled by the demands for higher efficiency in material testing; consistency, quality, and traceability of data; product design; engineering analysis; as well as control of access to proprietary or sensitive information. This is particularly true when attempting to merge ICME practices with recent additive manufacturing technology which will enable production of the resulting 2040 Vision material and structural designs. At NASA Glenn Research Center we are exploring the future of material science through the use of novel characterization methodologies, high performance computing, and recently an emphasis on integrated computational materials engineering (ICME). Herein, recent efforts to incorporate an Application Table within NASA Glenn Research Center’s ICME Granta MI database is presented. The goal is to provide a place where material and structural application information/requirements can be linked so as to marry the “design the-material” and the “design-with-material” paradigms and thereby enable application-driven design and optimization of materials and structures by providing a central location that links material processing at various length scales to the application’s performance requirements. This paper discusses the specifics of this Application Table as well as best practices and key principles for the development of a robust materials information management system to enable the 2040 Vision integrated materials and structures ecosystem. Furthermore, it presents the intended role of the Application Table in the future of ICME design of “fit-for-purpose” materials, showing the need for a well-established framework that can successfully bridge the gap between the design “the material” and design “with-the-material” paradigms.

Materials↗