Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flux analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Three-Dimensional Magnetic Restructuring in Two Homologous Solar Flares in the Seismically Active NOAA AR 11283

We carry out a comprehensive investigation comparing the three-dimensional magnetic field restructuring, flare energy release, and the helioseismic response of two homologous flares, the 2011 September 6 X2.1 (FL1) and September 7 X1.8 (FL2) flares in NOAA AR 11283. In our analysis, (1) a twisted flux rope (FR) collapses onto the surface at a speed of 1.5 km s(exp−1) after a partial eruption in FL1. The FR then gradually grows to reach a higher altitude and collapses again at 3 km s(exp−1) after a fuller eruption in FL2. Also, FL2 shows a larger decrease of the flux-weighted centroid separation of opposite magnetic polarities and a greater change of the horizontal field on the surface. These imply a more violent coronal implosion with corresponding more intense surface signatures in FL2. (2) The FR is inclined northward and together with the ambient fields, it undergoes a southward turning after both events. This agrees with the asymmetric decay of the penumbra observed in the peripheral regions. (3) The amounts of free magnetic energy and nonthermal electron energy released during FL1 are comparable to those of FL2 within the uncertainties of the measurements. (4) No sunquake was detected in FL1; in contrast, FL2 produced two seismic emission sources S1 and S2 both lying in the penumbral regions. Interestingly, S1 and S2 are connected by magnetic loops, and the stronger source S2 has a weaker vertical magnetic field. We discuss these results in relation to the implosion process in the low corona and the sunquake generation.

Sun: X-rays↗

On the Impact of Granularity of Space-Based Urban CO2 Emissions in Urban Atmospheric Inversions: A Case Study for Indianapolis, IN

Quantifying greenhouse gas (GHG) emissions from cities is a key challenge towards effective emissions management. An inversion analysis from the INdianapolis FLUX experiment (INFLUX) project, as the first of its kind, has achieved a top-down emission estimate for a single city using CO2 data collected by the dense tower network deployed across the city. However, city-level emission data, used as a priori emissions, are also a key component in the atmospheric inversion framework. Currently, fine-grained emission inventories (EIs) able to resolve GHG city emissions at high spatial resolution, are only available for few major cities across the globe. Following the INFLUX inversion case with a global 1x1 km ODIAC fossil fuel CO2 emission dataset, we further improved the ODIAC emission field and examined its utility as a prior for the city scale inversion. We disaggregated the 1x1 km ODIAC non-point source emissions using geospatial datasets such as the global road network data and satellite-data driven surface imperviousness data to a 3030 m resolution. We assessed the impact of the improved emission field on the inversion result, relative to priors in previous studies (Hestia and ODIAC). The posterior total emission estimate (5.1 MtC/yr) remains statistically similar to the previous estimate with ODIAC (5.3 MtC/yr). However, the distribution of the flux corrections was very close to those of Hestia inversion and the model-observation mismatches were significantly reduced both in forward and inverse runs, even without hourly temporal changes in emissions. EIs reported by cities often do not have estimates of spatial extents. Thus, emission disaggregation is a required step when verifying those reported emissions using atmospheric models. Our approach offers gridded emission estimates for global cities that could serves as a prior for inversion, even without locally reported EIs in a systematic way to support city-level Measuring, Reporting and Verification (MRV) practice implementation.

EIs↗

HZETRN Radiation Transport Validation Using Balloon-Based Experimental Data

The deterministic radiation transport code HZETRN (High charge (Z) and Energy TRaNsport) was developed by NASA to study the effects of cosmic radiation on astronauts and instrumentation shielded by various materials. This work presents an analysis of computed differential flux from HZETRN compared with measurement data from three balloon-based experiments over a range of atmospheric depths, particle types, and energies. Model uncertainties were quantified using an interval-based validation metric that takes into account measurement uncertainty both in the flux and the energy at which it was measured. Average uncertainty metrics were computed for the entire dataset as well as subsets of the measurements (by experiment, particle type, energy, etc.) to reveal any specific trends of systematic over- or under-prediction by HZETRN. The distribution of individual model uncertainties was also investigated to study the range and dispersion of errors beyond just single scalar and interval metrics. The differential fluxes from HZETRN were generally well-correlated with balloon-based measurements; the median relative model difference across the entire dataset was determined to be 30%. The distribution of model uncertainties, however, revealed that the range of errors was relatively broad, with approximately 30% of the uncertainties exceeding ± 40%. The distribution also indicated that HZETRN systematically under-predicts the measurement dataset as a whole, with approximately 80% of the relative uncertainties having negative values. Instances of systematic bias for subsets of the data were also observed, including a significant underestimation of alpha particles and protons for energies below 2.5 GeV/u. Muons were found to be systematically over-predicted at atmospheric depths deeper than 50 g/cm(sup 2) but under-predicted for shallower depths. Furthermore, a systematic under-prediction of alpha particles and protons was observed below the geomagnetic cutoff, suggesting that improvements to the light ion production cross sections in HZETRN should be investigated.

James E Warner↗

Global Energy and Water Exchanges Program Surface Radiation Budget Release 4 Integrated Product: Algorithm Theoretical Basis Document

This document represents the Algorithm Theoretical Basis Document (ATBD) describing the NASA Langley Research Center's Surface Radiation budget (SRB) developed in collaboration with the World Research Climate Programme's Global Energy and Water Exchanges Program. The top of atmosphere and surface fluxes span from July 1, 1983 through June 30, 2017. The shortwave or solar wavelengths span the entire record. The thermal infrared or longwave fluxes span globally from January 1, 1988 to December 30, 2009. Before 1988, only the land-only fluxes are available. After 2009 only the ocean fluxes are available. This document describes all the inputs and radiative transfer algorithms used to generate the TOA and surface radiative fluxes. The fluxes include upward and downward, all-sky, clear-sky and pristine sky conditions. Surface net fluxes and cloud radiative effect are computed and presented as part of the analysis. Comparisons to other data products are made to assess the top-of-atmosphere and surface fluxes. Additionally, surface measurements are utilized to validation the surface fluxes. The surface validation analysis shows the the radiative fluxes are improved compared to the previous version. Data set cautions are also presented.

surface radiation budget↗

The Impact of Trends in the Large Scale Atmospheric Circulation on Mediterranean Surface Turbulent Heat Fluxes

Interannual variations of latent heat fluxes (LHF) and sensible heat fluxes (SHF) over the Mediterranean for the boreal winter season (DJF) show positive trends during 1958-2011. Using reanalysis and satellite-based products, the variability and trends in the heat fluxes are compared with variations in three atmospheric teleconnection patterns: the North Atlantic Oscillation (NAO), the pressure and position of the Azores High (AH), and the East Atlantic-West Russia teleconnection pattern (EAWR). Comparison of correlations between the heat fluxes and teleconnections, along with analysis of composites of surface temperature, humidity, and wind fields for different teleconnection states, demonstrates that the AH explains the heat flux changes more successfully than NAO and EAWR. Trends in pressure and longitude of the Azores High show a strengthening and an eastward shift. Variations of the Azores High occur along an axis defined by lower pressure and westward location at one extreme and higher pressure and eastward location at the other extreme. The shift of the AH from predominance of the low/west state to the high/east state induces trends in Mediterranean Sea surface winds, temperature, and moisture. These, combined with sea surface warming trends, produce trends in wintertime sensible and latent heat fluxes.

Latent heat↗

BOREAS HYD-1 Soil Hydraulic Properties

The Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-1 team coordinated a program of data collection to measure and monitor soil properties in collaboration with other science team measurement needs. This data set contains soil hydraulic properties determined at the Northern Study Area (NSA) and Southern Study Area (SSA) flux tower sites based on analysis of in situ tension infiltrometer tests and laboratory-determined water retention from soil cores collected during the 1994-95 field campaigns. Results from this analysis are saturated hydraulic conductivity, and fitting parameters for the van Genuchten-Mualem soil hydraulic conductivity and water retention function at flux tower sites. The data are contained in tabular ASCII files. The HYD-01 soil hydraulic properties data are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

Hall, Forrest G.↗

Preserved signatures of ion flux modulations observed by ATS 6

The considered investigation is concerned with a detailed analysis of the event of August 13, 1974. The considered day was a geomagnetically quiet day, and ATS 6 was stationed at 94 deg W longitude. On the basis of the conducted analysis it is found that the observed flux oscillations may be a fossil signature of flux modulations which have occurred in ions at an earlier time and at a region away from the spot of observation. In conclusion, it is pointed out that the August 13, 1974, and the January 23, 1975, events of proton flux oscillations observed by ATS 6 are of great importance. They reveal another unique capability of the drifting particles for preserving small modulation signatures imposed upon them during earlier wave-particle interactions. At the present, no conclusions are drawn as to what kind of the wave-particle interaction process was responsible for the observation.

Su, S.-Y.↗

Sunspots and the physics of magnetic flux tubes. I - The general nature of the sunspot. II - Aerodynamic drag

Analysis of the dynamical stability of a large flux tube suggests that the field of a sunspot must divide into many separate tubes within the first 1000 km below the surface. Buoyancy of the Wilson depression at the visible surface and probably also a downdraft beneath the sunspot hold the separate tubes in a loose cluster. Convective generation of Alfven waves, which are emitted preferentially downward, cools the tubes. Aerodynamic drag on a slender flux tube stretched vertically across a convective cell is also studied. Since the drag is approximately proportional to the local kinetic energy density, the density stratification weights the drag in favor of the upper layers. Horizontal motions concentrated in the bottom of the convective cell may reverse this density effect. A downdraft of about two km/sec through the flux tubes beneath the sunspot is hypothesized.

Parker, E. N.↗

Rendering Three-Dimensional Solar Coronal Structures

An X-ray or EUV image of the corona or chromosphere is a 2D representation of an extended 3D complex for which a general inversion process is impossible. A specific model must be incorporated in order to understand the full 3D structure. We approach this problem by modeling a set of optically-thin 3D plasma flux tubes which we render these as synthetic images. The resulting images allow the interpretation of the X-ray/EUV observations to obtain information on (1) the 3D structure of X-ray images, i.e., the geometric structure of the flux tubes, and on (2) the internal structure using specific plasma characteristics, i.e., the physical structure of the flux tubes. The data-analysis technique uses magnetograms to characterize photospheric magnetic fields and extrapolation techniques to form the field lines. Using a new set of software tools, we have generated 3D flux tube structures around these field lines and integrated the plasma emission along the line of sight to obtain a rendered image. A set of individual flux-tube images is selected by a non-negative least-squares technique to Provide a match with an observed X-ray image. The scheme minimizes the squares of the differences between the synthesized image and the observed image with a non-negative constraint on the coefficients of the brightness of the individual flux-tube loops. The derived images are used to determine the specific photospheric foot points and physical data, i.e., scaling laws for densities and loop lengths. The development has led to Computer efficient integration and display software that is compatible for comparison with observations (e.g., Yohkoh SXT data, NIXT, or EIT). This analysis is important in determining directly the magnetic field configuration, which provides the structure of coronal loops, and indirectly the electric currents or waves, which provide the energy for the heating of the plasma. We have used very simple assumptions (i.e., potential magnetic fields and isothermal corona) to provide an initial test of the techniques before complex models are introduced. We have separated the physical and geometric contributions of the emission for a set of flux tubes and concentrated, in this initial study, on the geometric contributions by making approximations to the physical contributions. The initial results are consistent with the scaling laws derived from Yohkoh SXT data.

Gary, G. Allen↗

Measurement of Galactic 26Al with the Compton Spectrometer and Imager

The Compton Spectrometer and Imager (COSI) is a balloon-borne compact Compton telescope de-17signed to survey the 0.2–5 MeV sky. COSI’s energy resolution of ∼0.2% at 1.8 MeV, single-photon reconstruction, and wide field of view make it capable of studying astrophysical nuclear lines, particularly the 1809 keVγ-ray line from decaying Galactic 26Al. Most 26Al originates in massive stars and core-collapse supernova nucleosynthesis, but the path from stellar evolution models to Galaxy-wide emission remains unconstrained. In 2016, COSI had a successful 46-day flight on a NASA super pressure balloon. Here, we detail the first search for the 1809 keV26Al line in the COSI 2016 balloon flight using a maximum likelihood analysis. We find a Galactic 26Al flux of (8.6±2.5) ×10−4ph cm−2s−124 within the Inner Galaxy (|ℓ|≤30◦,|b|≤10◦) with 3.7σ significance above background. Within uncertainties, this flux is consistent with expectations from previous measurements by SPI and COMPTEL. This analysis demonstrates COSI’s powerful capabilities for studies of γ-ray lines and underscores the scientific potential of future compact Compton telescopes. In particular, the next iteration of COSI as a NASA Small Explorer satellite has recently been approved for launch in 2025.

Gamma-ray lines↗

Comparison between solar wind latitude distribution derived from Lyman-alpha observations and Ulysses measurements

The all-sky interplanetary Lyman-alpha pattern is sensitive to the latitude distribution of the solar wind because of destruction of neutral H by charge-exchange with solar wind protons. Lyman-alpha intensities recorded by Prognoz 5 and 6 in 1976 in a few parts of the sky were demonstrating a decrease of solar wind mass flux by about 30 % from equator to pole, when assuming a sinusoidal variation of this mass flux (harmonic distribution). A new analysis with a discrete variation with latitude has shown a decrease from 0 to 30 deg and then a plateau of constant mass flux up to the pole. This distribution bears a striking resemblance with Ulysses in-situ measurements, showing a clear similarity at 19 years interval. The Ulysses measurements were then used as a model input to calculate an all-sky Lyman-alpha pattern, either with a discrete model or with a harmonic solar wind variation with the same Ulysses equator-to-pole variation. There are conspicuous differences between the two Lyman-alpha patterns, in particular in the downwind region which are discussed in the context of future all-sky measurements with SWAN experiment on SOHO.

Quemarais, E.↗

Flux transfer events: Reconnection without separators

A topological analysis of a simple model magnetic field of a perturbation at the magnetopause modeling an apparent flux transfer event is presented. It is shown that a localized perturbation at the magnetopause can in principle open a closed magnetosphere by establishing magnetic connections across the magnetopause. Although the model field exhibits neutral points, these are not involved in the magnetic connection of the flux tubes. The topological substructure of a localized perturbation is analyzed in a simpler configuration. The presence of both signs of the magnetic field component normal to the magnetopause leads to a linkage of topologically different flux tubes, described as a flux knot, and a filamentary substructure of field lines of different topological types which becomes increasingly complicated for decreasing magnetic shear at the magnetopause.

Hesse, M.↗

Coupled Data Assimilation for Integrated Earth System Analysis and Prediction: Goals, Challenges, and Recommendations

The purpose of this report is to identify fundamental issues for coupled data assimilation (CDA), such as gaps in science and limitations in forecasting systems, in order to provide guidance to the World Meteorological Organization (WMO) on how to facilitate more rapid progress internationally. Coupled Earth system modeling provides the opportunity to extend skillful atmospheric forecasts beyond the traditional two-week barrier by extracting skill from low-frequency state components such as the land, ocean, and sea ice. More generally, coupled models are needed to support seamless prediction systems that span timescales from weather, subseasonal to seasonal (S2S), multiyear, and decadal. Therefore, initialization methods are needed for coupled Earth system models, either applied to each individual component (called Weakly Coupled Data Assimilation - WCDA) or applied the coupled Earth system model as a whole (called Strongly Coupled Data Assimilation - SCDA). Using CDA, in which model forecasts and potentially the state estimation are performed jointly, each model domain benefits from observations in other domains either directly using error covariance information known at the time of the analysis (SCDA), or indirectly through flux interactions at the model boundaries (WCDA). Because the non-atmospheric domains are generally under-observed compared to the atmosphere, CDA provides a significant advantage over single-domain analyses. Next, we provide a synopsis of goals, challenges, and recommendations to advance CDA: Goals: (a) Extend predictive skill beyond the current capability of NWP (e.g. as demonstrated by improving forecast skill scores), (b) produce physically consistent initial conditions for coupled numerical prediction systems and reanalyses (including consistent fluxes at the domain interfaces), (c) make best use of existing observations by allowing observations from each domain to influence and improve the full earth system analysis, (d) develop a robust observation-based identification and understanding of mechanisms that determine the variability of weather and climate, (e) identify critical weaknesses in coupled models and the earth observing system, (f) generate full-field estimates of unobserved or sparsely observed variables, (g) improve the estimation of the external forcings causing changes to climate, (h) transition successes from idealized CDA experiments to real-world applications. Challenges: (a) Modeling at the interfaces between interacting components of coupled Earth system models may be inadequate for estimating uncertainty or error covariances between domains, (b) current data assimilation methods may be insufficient to simultaneously analyze domains containing multiple spatiotemporal scales of interest, (c) there is no standardization of observation data or their delivery systems across domains, (d) the size and complexity of many large-scale coupled Earth system models makes it is difficult to accurately represent uncertainty due to model parameters and coupling parameters, (e) model errors lead to local biases that can transfer between the different Earth system components and lead to coupled model biases and long-term model drift, (e) information propagation across model components with different spatiotemporal scales is extremely complicated, and must be improved in current coupled modeling frameworks, (h) there is insufficient knowledge on how to represent evolving errors in non-atmospheric model components (e.g. as sea ice, land and ocean) on the timescales of NWP.

CDA↗

What Could Be the Observational Signature of Dark Matter in Globular Clusters?

Here we investigate the possibility that some globular clusters (GCs) harbor intermediate mass black holes (BH) in their centers and are also embedded in a low-mass dark matter (DM) halo. Up to date, there is no evidence on whether or not GCs have DM in their constitution. For standard cold DM cosmology, it is expected that GCs form with their own DM halos. Other studies investigate the possibility that GCs were initially embedded in massive DM halos that evolved during the cluster lifetime. An additional intriguing question is related to the existence of intermediate mass black holes (IMBH) in the GCs. The determination of whether GCs hold IMBHs would be able to answer important questions about GCs formation and the circumstances that gave rise to the IMBHs. DM & IMBH in the context of GCs are interesting subjects to be studied and we will perform such studies here, assuming the coexistence of both of them in some GCs. Having such information, we perform the study possible DM signals from GCs. One important subject to be studied is the DM density profile. In the inner regions of GCs, the DM density profile is still an open question of fundamental importance to DM studies, specially for the study of radio and γ-ray emission from DM annihilation in such regions. Here we consider the case of IMBHs in the inner regions of three GCs: 47 Tuc, NGC 6266 and ω Cen. The existence of a black hole (BH) directly affects the matter distribution in its vicinity. These effects are significant for IMBHs as well as supermassive black holes (SMBHs) and can lead to large DM overdensities called spikes. In this paper, we direct our studies to the radio synchrotron emission from DM annihilation with spike profiles around possible IMBHs in GCs. We present our results for synchrotron emission produced by DM annihilation via bbar b channel. We use the best-fit DM mass of 34 GeV and annihilation channel in bbar b used to explain the Galactic center "excess" and perform our analysis for the estimated radio flux. We direct our attention specially to the γ-ray emission from 47 Tuc. When considering a scenario wich includes a BH and the combined analysis of multi-wavelength studies, we conclude that some parameter choice as the annihilation cross section ⟨σ v⟩ used to fit the γ-ray excess differs by many orders of magnitude from the one necessary to fit the radio observations for this globular cluster if we consider the BH scenario.

Elaine C F S Fortes↗

Analysis of shape of porous cooled medium for an imposed surface heat flux and temperature

The surface of a porous cooled medium is to be maintained at a specified design temperature while being subjected to uniform heating by an external source. An analytical method is given for determining the shape of the medium surface that will satisfy these boundary conditions. The analysis accounts for temperature dependent variations of fluid density and viscosity and for temperature dependent matrix thermal conductivity. The energy equation is combined with Darcy's law in such a way that a potential can be defined that satisfies Laplace's equation. All of the heat-transfer and flow quantities are expressed in terms of this potential. The determination of the shape of the porous cooled region is thereby reduced to a free-boundary problem such as in inviscid free jet theory. Two illustrative examples are carried out: a porous leading edge with coolant supplied through a slot and a porous cooled duct with a rectangular outer boundary.

Siegel, R.↗

Atomic Oxygen Erosion of EVA-Stranded Soft-Goods on the ISS

This paper presents the results of an analysis to calculate the cumulative, effective atomic oxygen (AO) flux impinging on short-duration EVA tethers used to secure panel NOD1/C2-02 and panel LAB/C2-03. Shadowing from the ram reduces the AO flux on much of the Node 1 panel. On the Lab panel, the tethers are essentially in the ram flux. Table 1 summarizes the results of the analysis for Node 1 and the US Lab panels.

Alred, John W.↗

Fluid & Thermal Analysis of a Manifold Microchannel Heat Sink

A three-dimensional (3-D) numerical model has been developed to study the fluid flow and heat transfer through a manifold-microchannel (MMC) heat sink, a microfluidic cooling system designed as a heat dissipation solution for compact, high-powered electronic systems. An MMC consists of a 3-D manifold structure that distributes working fluid through alternating inlet and outlet manifold channels that guide the fluid to and from the microchannels, shortening the flow length and thereby, reducing the pressure drop across the system. Wide bandgap semiconductors such as silicon carbide (SiC) are increasingly utilized due to their ability to enable smaller electronic devices and components to operate more efficiently at higher frequencies. These semiconductors can greatly benefit from the MMC, which can extract all the heat produced by compact, high-powered electronics, enabling them to achieve optimal performance. The MMC also utilizes an embedded cooling approach which allows for fabrication directly within SiC-based electronics, resulting in significant mass and weight savings and lower thermal resistance than conventional heat sink designs. This paper outlines the methods used to conduct fluid and thermal analysis of different MMC configurations for flow parameters such as flow rate and inlet flow conditions. This study involves both steady state and transient thermal analysis as a gradually increasing heat flux is applied to the system over time, which is representative of the heat dissipation from the electronics over a given period. Results from the analysis show that the MMC is capable of effectively dissipating heat flux of ~100 W/cm2 while maintaining considerably low pressure drop (< 1 kPa) and thermal resistance (< 1 K/W) for certain single-phase working fluids.

manifold microchannel↗

Fluid & Thermal Analysis of a Manifold Microchannel Heat Sink

A three-dimensional (3-D) numerical model has been developed to study the fluid flow and heat transfer through a manifold-microchannel (MMC) heat sink, a microfluidic cooling system designed as a heat dissipation solution for compact, high-powered electronic systems. An MMC consists of a 3-D manifold structure that distributes working fluid through alternating inlet and outlet manifold channels that guide the fluid to and from the microchannels, shortening the flow length and thereby, reducing the pressure drop across the system. Wide bandgap semiconductors such as silicon carbide (SiC) are increasingly utilized due to their ability to enable smaller electronic devices and components to operate more efficiently at higher frequencies. These semiconductors can greatly benefit from the MMC, which can extract all the heat produced by compact, high-powered electronics, enabling them to achieve optimal performance. The MMC also utilizes an embedded cooling approach which allows for fabrication directly within SiC-based electronics, resulting in significant mass and weight savings and lower thermal resistance than conventional heat sink designs. This paper outlines the methods used to conduct fluid and thermal analysis of different MMC configurations for flow parameters such as flow rate and inlet flow conditions. This study involves both steady state and transient thermal analysis as a gradually increasing heat flux is applied to the system over time, which is representative of the heat dissipation from the electronics over a given period. Results from the analysis show that the MMC is capable of effectively dissipating heat flux of ~100 W/cm2 while maintaining considerably low pressure drop (< 1 kPa) and thermal resistance (< 1 K/W) for certain single-phase working fluids.

manifold microchannel↗