Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ferromagnetic materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Canted standing spin-wave modes of permalloy thin films observed by ferromagnetic resonance

Non-collinear spin structures in materials that combine perpendicular and in-plane magnetic anisotropies are of great technological interest for microwave and spin wave-assisted magnetization switching. [Co/Pt] multilayers are well-known perpendicular anisotropy materials that have the potential to pin the magnetization of a soft magnetic layer, such as permalloy (Py), that has in-plane anisotropy, thereby forming a magnetic exchange spring. Here we report on multilayered [Co/Pt]/Pt/Py films, where an additional ultrathin Pt spacer has been included to control the coupling between the sub-units with in-plane and perpendicular magnetic anisotropy. Vector network analyser (VNA)-ferromagnetic resonance (FMR) measurements were made to obtain a complete picture of the resonant conditions, while the dynamical response of the sub-units was probed by synchrotron-based element- and phase selective x-ray detected FMR (XFMR). For all samples, only slight pinning of the dynamic magnetization of the Py by the [Co/Pt] was noted, and the FMR results were dominated by the 50 nm thick Py layer. Out-of-plane VNA-FMR maps reveal the presence of additional modes, e.g. a perpendicular standing spin-wave (PSSW) state. However, as the magnetic field is reduced below the saturation field, the PSSW state morphs continuously through a series of canted standing spin-wave (CSSW) states into a horizontal standing spin-wave (HSSW) state. The PSSW, CSSW and HSSW states are well described using a multilayer model of the Py film. The observation of CSSW modes is of particular relevance to microwave assisted magnetic recording, where microwave excitation stimulates precession of a soft layer canted out of plane by a pulsed magnetic field.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Revealing room temperature ferromagnetism in exfoliated Fe 5 GeTe 2 flakes with quantum magnetic imaging

Van der Waals (vdW) material Fe 5 GeTe 2 , with its long-range ferromagnetic ordering near room temperature, has significant potential to become an enabling platform for implementing novel spintronic and quantum devices. To pave the way for applications, it is crucial to determine the magnetic properties when the thickness of Fe 5 GeTe 2 reaches the few-layers regime. However, this is highly challenging due to the need for a characterization technique that is local, highly sensitive, artifact-free, and operational with minimal fabrication. Prior studies have indicated that Curie temperature T C can reach up to close to room temperature for exfoliated Fe 5 GeTe 2 flakes, as measured via electrical transport; there is a need to validate these results with a measurement that reveals magnetism more directly. Here, we investigate the magnetic properties of exfoliated thin flakes of vdW magnet Fe 5 GeTe 2 via quantum magnetic imaging technique based on nitrogen vacancy centers in diamond. Through imaging the stray fields, we confirm room-temperature magnetic order in Fe 5 GeTe 2 thin flakes with thickness down to 7 units cell. The stray field patterns and their response to magnetizing fields with different polarities is consistent with previously reported perpendicular easy-axis anisotropy. Furthermore, we perform imaging at different temperatures and determine the Curie temperature of the flakes at ≈300 K. These results provide the basis for realizing a room-temperature monolayer ferromagnet with Fe 5 GeTe 2 . This work also demonstrates that the imaging technique enables rapid screening of multiple flakes simultaneously as well as time-resolved imaging for monitoring time-dependent magnetic behaviors, thereby paving the way towards high throughput characterization of potential two-dimensional (2D) magnets near room temperature and providing critical insights into the evolution of domain behaviors in 2D magnets due to degradation.

2D magnet↗
DOE OSTI2021

Emerged Metallicity in Molecular Ferromagnetic Wires

Supramolecular engineering bridges molecular assembly with macromolecular charge-transfer salts, promising the design to construct supramolecular architectures that integrate cooperative properties difficult or impossible to find in conventional lattices. Here, we report the crystal engineering design and kinetic growth of one-dimensional supramolecular wires composed of bis(ethylenedithio)tetrathiafulvalene (ET + ) cation and polymeric Cu[N(CN) 2 ] 2 – anion. A bulk ferromagnetic order is discovered for filling up the gap where strong ferromagnetism is missing in such ET molecule-based charge-transfer salts. Metallicity is induced by electric current from the semiconducting wire, which is attributed to strain effect by tuning its close molecular contact. This structural feature is evidenced through the combination of various mechanistic spectroscopic studies. Further, electric dipole is established from the close molecular contacts and is suggestive to stabilize ferromagnetic spin interaction through anions bridging spin sites. The breakthrough shown here provides a pathway to explore low-dimensional supramolecular materials exhibiting strong electron correlation, metallicity, and ferromagnetism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Three-dimensional ferromagnetism and magnetotransport in van der Waals Mn-intercalated tantalum disufide

Van der Waals (vdW) ferromagnets are an important class of materials for spintronics applications. The recent discovery of atomically vdW magnets CrI 3 and Cr 2 Ge 2 Te 6 has triggered a renaissance in the area of two-dimensional (2D) magnetism. Herein we systematically studied 2H-Mn 0.28 TaS 2 single crystal, a 2D vdW ferromagnet with T c ~ 82.3K, and a large in-plane magnetic anisotropy. Mn K-edge x-ray absorption spectroscopy was measured to provide information on its electronic state and local atomic environment. The detailed magnetic isotherms measured in the vicinity of T c indicates that the spin coupling inside 2H-Mn 0.28 TaS 2 is of a 3D Heisenberg type coupled with the attractive long-range interaction between spins that decay as J(r) ≈ r –4.85 . Both resistivity ρ(T) and thermopower S(T) exhibit anomalies near T c , confirming that the hole-type transport carriers strongly interact with local moments. Furthermore, an unusual angle-dependent magnetoresistance is further observed, suggesting a possible field-induced novel magnetic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Induced Ferromagnetism in Epitaxial Uranium Dioxide Thin Films

Abstract Actinide materials have various applications that range from nuclear energy to quantum computing. Most current efforts have focused on bulk actinide materials. Tuning functional properties by using strain engineering in epitaxial thin films is largely lacking. Using uranium dioxide (UO 2 ) as a model system, in this work, the authors explore strain engineering in actinide epitaxial thin films and investigate the origin of induced ferromagnetism in an antiferromagnet UO 2 . It is found that UO 2+ x thin films are hypostoichiometric ( x <0) with in‐plane tensile strain, while they are hyperstoichiometric ( x >0) with in‐plane compressive strain. Different from strain engineering in non‐actinide oxide thin films, the epitaxial strain in UO 2 is accommodated by point defects such as vacancies and interstitials due to the low formation energy. Both epitaxial strain and strain relaxation induced point defects such as oxygen/uranium vacancies and oxygen/uranium interstitials can distort magnetic structure and result in magnetic moments. This work reveals the correlation among strain, point defects and ferromagnetism in strain engineered UO 2+ x thin films and the results offer new opportunities to understand the influence of coupled order parameters on the emergent properties of many other actinide thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Revisiting spin ice physics in the ferromagnetic Ising pyrochlore Pr 2 Sn 2 O 7

Pyrochlore materials are characterized by their hallmark network of corner-sharing rare-earth tetrahedra, which can produce a wide array of complex magnetic ground states. Ferromagnetic Ising pyrochlores often obey the “two-in-two-out” spin ice rules, which can lead to a highly degenerate spin structure. Large moment systems, such as Ho 2 Ti 2 O 7 and Dy 2 Ti 2 O 7 , tend to host a classical spin ice state with low-temperature spin freezing and emergent magnetic monopoles. Systems with smaller effective moments, such as Pr 3+ -based pyrochlores, have been proposed as excellent candidates for hosting a “quantum spin ice” characterized by entanglement and a slew of exotic quasiparticle excitations. However, experimental evidence for a quantum spin ice state has remained elusive. Here, in this work, we show that the low-temperature magnetic properties of Pr 2 Sn 2 O 7 satisfy several important criteria for continued consideration as a quantum spin ice. We find that Pr 2 Sn 2 O 7 exhibits two distinct spin-correlation time scales of τ ≥ 10 –4 and ~10 –10 s in the spin ice regime. Our comprehensive bulk characterization and neutron scattering measurements enable us to map out the magnetic field-temperature phase diagram, producing results consistent with expectations for a ferromagnetic Ising pyrochlore. We identify key hallmarks of spin ice physics and show that the application of small magnetic fields (μ 0 H c ~0.5 T) suppresses the spin ice state and induces a field-polarized, ordered spin-ice phase. Together, our work clarifies the current state of Pr 2 Sn 2 O 7 and encourages future studies aimed at exploring the potential for a quantum spin ice ground state in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of random antiferromagnetic exchange on the spin waves in a three-dimensional Heisenberg ferromagnet

Neutron scattering is used to study spin waves in the three-dimensional Heisenberg ferromagnet YTiO 3 , with spin-spin exchange disorder introduced via La substitution at the Y site. No significant changes are observed in the spin-wave dispersion up to a La concentration of 20%. However, a strong broadening of the spectrum is found, indicative of shortened spin-wave lifetimes. Density-functional theory calculations predict minimal changes in exchange constants as a result of average structural changes due to La substitution, in agreement with the data. The absence of significant changes in the spin-wave dispersion, the considerable lifetime effect, and the reduced ordered magnetic moment previously observed in the La-substituted system are qualitatively captured by an isotropic, nearest-neighbor, three-dimensional Furthermore, Heisenberg ferromagnet model with random antiferromagnetic exchange. We therefore establish Y 1-$x$ La $x$ TiO 3 as a model system for the study of antiferromagnetic spin-exchange disorder in a three-dimensional Heisenberg ferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Strong Magnetocrystalline Anisotropy Arising from Metal–Ligand Covalency in a Metal–Organic Candidate for 2D Magnetic Order

Layered metal–organic frameworks are promising candidates for new two-dimensional magnets, as their synthetic programmability of these materials can provide a route to diverse structural and electronic properties. However, such framework materials typically lack the heavy elements that engender magnetocrystalline anisotropy in the monolayer ferromagnets reported to date. Alternative sources of magnetic anisotropy are therefore needed in these materials. Here, we report the synthesis of single crystals of the framework material (NMe 4 ) 2 [Fe 2 L 3 ] (H 2 L = 3,6-dichloro-2,5-dihydroxybenzoquinone) and evaluate the angular dependence of its magnetic properties. Oriented-crystal magnetization measurements reveal strong uniaxial anisotropy, where the easy axis is aligned with the crystallographic c axis. While the spin carriers of this structure are isotropic $S = ^5/_2$ Fe III metal centers and $S = ^1/_2$ organic linkers, the anisotropy energy of the framework material is comparable to that of reported 2D ferromagnets. Density functional theory calculations indicate that the observed magnetocrystalline anisotropy arises from ligand-to-metal charge transfer that enhances the magnetic anisotropy of the otherwise isotropic Fe centers, suggesting that metal–ligand covalency can be utilized as a general additive for the development of 2D magnets. These results in this study show the possibility for (NMe 4 ) 2 [Fe 2 L 3 ] to retain magnetic order down to the 2D monolayer limit. In addition, the combination of large magnetic anisotropy and semiconducting character in (NMe 4 ) 2 [Fe 2 L 3 ] highlights its potential as a new 2D magnetic semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Magnetization distribution in Cu 0.6 Mn 2.4 Ge 2 ferromagnet from polarized and non-polarized neutron powder diffraction aided by density-functional theory calculations

The crystal structure and magnetic properties of Cu 0.6 Mn 2.4 Ge 2 have been re-investigated by a combination of extensive magnetic measurements and neutron scattering experiments, aided by electronic structure calculations. The material is found to be a soft ferromagnet with the ordering temperature T C = 316 K. The magnetocaloric effect evaluated from field-dependent magnetization isotherms is equal to 1.2 J/(kg·K) and 2.5 J/(kg·K) under the maximum applied magnetic field of 2 T and 5 T, respectively. The compound crystallizes in the hexagonal space group P6 3 /mmc. A complex structural disorder necessitated testing of several disorder models against the results of non-polarized and polarized neutron scattering experiments and magnetization measurements. Simulations at the density-functional theory level were also performed to identify the most robust solution that properly described the data observed. The final magnetic structure model reveals non-equal magnetic moments on the Mn1 and Mn2 atoms (2.29(9) µ B and 2.7(1) µ B , respectively) and the presence of vacancies and minor Cu substitution defects in both Mn sites. The work demonstrates how the non-polarized and polarized neutron scattering methods can be combined with electronic structure calculations to establish the microscopic structure of magnetic materials with complex crystallographic disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Monolayer 1T-LaN 2 : Dirac spin-gapless semiconductor of p -state and Chern insulator with a high Chern number

Two-dimensional transition-metal dinitrides have attracted considerable attention in recent years due to their rich magnetic properties. Here, we focus on rare-earth-metal elements and propose a monolayer of lanthanum dinitride with a 1T structural phase, 1T-LaN 2 . Using first-principles calculations, we systematically investigated the structure, stability, magnetism, and band structure of this material. It is a flexible and stable monolayer exhibiting a low lattice thermal conductivity, which is promising for future thermoelectric devices. Here, the monolayer shows the ferromagnetic ground state with a spin-polarized band structure. Two linear spin-polarized bands cross at the Fermi level forming a Dirac point, which is formed by the p atomic orbitals of the N atoms, indicating that monolayer 1T-LaN 2 is a Dirac spin-gapless semiconductor of p-state. When the spin–orbit coupling is taken into account, a large nontrivial indirect bandgap (86/354 meV) can be opened at the Dirac point, and three chiral edge states are obtained, corresponding to a high Chern number of C = 3, implying that monolayer 1T-LaN 2 is a Chern insulator. Importantly, this kind of band structure is expected to occur in more monolayers of rare-earth-metal dinitride with a 1T structural phase.

2D materials↗
DOE OSTI2021

Switching of a Magnet by Spin-Orbit Torque from a Topological Dirac Semimetal

Recent experiments show that topological surface states (TSS) in topological insulators (TI) can be exploited to manipulate magnetic ordering in ferromagnets. In principle, TSS should also exist for other topological materials, but it remains unexplored as to whether such states can also be utilized to manipulate ferromagnets. In this paper, current-induced magnetization switching enabled by TSS in a non-TI topological material, namely, a topological Dirac semimetal α-Sn, is reported. The experiments use an α-Sn/Ag/CoFeB trilayer structure. The magnetization in the CoFeB layer can be switched by a charge current at room temperature, without an external magnetic field. The data show that the switching is driven by the TSS of the α-Sn layer, rather than spin-orbit coupling in the bulk of the α-Sn layer or current-produced heating. The switching efficiency is as high as in TI systems. This shows that the topological Dirac semimetal α-Sn is as promising as TI materials in terms of spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Revealing Robust Room Temperature Ferromagnetism in Gd‐Doped Few‐Layered MoS 2 Thin Films

2D MoS 2 holds great promise for spintronics, yet is limited by intrinsic diamagnetism. This study demonstrates inducing ferromagnetic behavior in MoS 2 films doped with 0.47% Gd, achieving an ultrahigh saturation magnetization of 454 emu/cm 3 in a few‐layered film over 11‐times higher than bulk films (40 nm). Raman spectroscopy, X‐ray photoelectron spectroscopy, X‐ray magnetic circular dichroism, and density functional theory (DFT) calculations reveal an interplay between Gd dopants and Mo, S vacancies (V 1Mo+2S ), leading to the formation of bound magnetic polarons (BMPs) that drive ferromagnetic ordering. H 2 S annealing and DFT calculations reveal that defect healing reduces the saturation magnetization by 83%. High sulfur migration barrier in few‐layered films helps preserve BMPs, thereby sustaining ferromagnetism, whereas lower migration barriers in bulk films lead to suppression. These findings highlight the synergy between Gd doping and defect engineering in achieving ultrahigh room‐temperature ferromagnetism, offering a scalable strategy for developing high‐performance 2D magnetic materials for spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Growth and characterization of large (Y,La)TiO 3 and (Y,Ca)TiO 3 single crystals

The Mott-insulating rare-earth titanates ( R TiO 3 , with R being a rare-earth ion) are an important class of materials that encompasses interesting spin-orbital phases as well as ferromagnet-antiferromagnet and insulator-metal transitions. The growth of these materials has been plagued by difficulties related to overoxidation, which arises from a strong tendency of Ti 3 + to oxidize to Ti 4 + . We describe our efforts to grow sizable single crystals of YTiO 3 , Y 1 - x La x TiO 3 ( x ≤ 0.25 ), and Y 1 - y Ca y TiO 3 ( y ≤ 0.35 ) with the optical traveling-solvent floating-zone technique. Finally, we present sample characterization via chemical composition analysis, magnetometry, charge transport, neutron scattering, x-ray absorption spectroscopy, and x-ray magnetic circular dichroism to understand macroscopic physical property variations associated with overoxidation. Furthermore, we demonstrate a good signal-to-noise ratio in inelastic magnetic neutron scattering measurements of spin-wave excitations. A superconducting impurity phase, found to appear in Ca-doped samples at high doping levels, is identified as TiO.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Orbital Angular Momentum of Magnons in Collinear Magnets

We study the orbital angular momentum of magnons for collinear ferromagnet (FM) and antiferromagnetic (AF) systems with nontrivial networks of exchange interactions. The orbital angular momentum of magnons for AF and FM zigzag and honeycomb lattices becomes nonzero when the lattice contains two inequivalent sites and is largest at the avoided-crossing points or extremum of the frequency bands. Hence, the arrangement of exchange interactions may play a more important role at producing the orbital angular momentum of magnons than the spin-orbit coupling energy and the resulting noncollinear arrangement of spins.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Origin of Insulating Ferromagnetism in Iron Oxychalcogenide Ce 2 O 2 FeSe 2

An insulating ferromagnetic (FM) phase exists in the quasi-one-dimensional iron oxychalcogenide Ce 2 O 2 FeSe 2 , but its origin is unknown. To understand the FM mechanism, here a systematic investigation of this material is provided, analyzing the competition between ferromagnetic and antiferromagnetic tendencies and the interplay of hoppings, Coulomb interactions, Hund’s coupling, and crystal-field splittings. Overall, our intuitive analysis based on second-order perturbation theory shows that large entanglements between doubly occupied and half filled orbitals play a key role in stabilizing the FM order in Ce 2 O 2 FeSe 2 . In addition, via many-body computational techniques applied to a multiorbital Hubbard model, the phase diagram confirms the proposed FM mechanism.

1-dimensional spin chains↗
DOE OSTI2020

Spin Rectification and Electrically Controlled Spin Transport in Molecular-Ferroelectrics-Based Spin Valves

We report a spin-rectification effect in a spin-valve structure consisting of ferroelectric croconic acid (C 5 H 2 O 5 ) sandwiched between ferromagnetic electrodes La 0.7 Sr 0.3 MnO 3 and Co, which can be switched between a high-resistance (off ) and a low-resistance (on) state by a poling voltage. In the off state, the magnetoresistance (MR) sign reverses with the measurement voltage with a 0.1-V offset, suggesting a spin-rectification behavior, while in the on state the MR remains negative. These observations can be understood in terms of electrically controlled interfacial energy-band alignment either from the electrostatic effect or from the interfacial redox process. In conclusion, the observed spin-rectification effect suggests thepossibility of diodelike devices for spin-polarized current.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Severe Dirac Mass Gap Suppression in Sb 2 Te 3 -Based Quantum Anomalous Hall Materials

The quantum anomalous Hall (QAH) effect appears in ferromagnetic topological insulators (FMTIs) when a Dirac mass gap opens in the spectrum of the topological surface states (SSs). Unaccountably, although the mean mass gap can exceed 28 meV (or ~320 K), the QAH effect is frequently only detectable at temperatures below 1 K. Using atomic-resolution Landau level spectroscopic imaging, we compare the electronic structure of the archetypal FMTI Cr 0.08 (Bi 0.1 Sb 0.9 ) 1.92 Te 3 to that of its nonmagnetic parent (Bi 0.1 Sb 0.9 ) 2 Te 3 , to explore the cause. In (Bi 0.1 Sb 0.9 ) 2 Te 3 , we find spatially random variations of the Dirac energy. Statistically equivalent Dirac energy variations are detected in Cr 0.08 (Bi 0.1 Sb 0.9 ) 1.92 Te 3 with concurrent but uncorrelated Dirac mass gap disorder. Additionally, these two classes of SS electronic disorder conspire to drastically suppress the minimum mass gap to below 100 μeV for nanoscale regions separated by <1 μm. This fundamentally limits the fully quantized anomalous Hall effect in Sb 2 Te 3 -based FMTI materials to very low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Towards additive manufacturing of magnetocaloric working materials

The feasibility of three-dimensional printing via the Directed Energy Deposition (DED) technique is demonstrated for the ferromagnetic AlFe 2 B 2 (aka 1-2-2) compound, which shows promise as a working material for room-temperature magnetocaloric devices. Like many intermetallic materials, the 1-2-2 compound is brittle at room temperature; not only is it difficult to synthesize from the melt, it is challenging to form it into useful geometries necessary for effective heat transfer in magnetocaloric devices. Using Laser Engineered Net Shaping (LENS TM ) synthesis from two powder precursors, AlB 2 and Fe, samples of simple (rod) and complex (honeycomb) architectures were successfully synthesized. Furthermore, the phase constitution and distribution, magnetic transition temperature, and saturation magnetization determined for the LENS TM -synthesized rod sample are all similar to those obtained for 1-2-2 materials made by conventional casting. Further, the measured magnetic entropy change, as determined from Maxwell's Relations applied to magnetic data, indicates that the magnetocaloric response of the annealed LENS TM -printed rod samples are comparable to those of the 1-2-2 compounds made by conventional techniques. These results confirm that complex magnetofunctional shapes, which are needed for efficient energy conversion in magnetocaloric devices, can be rapidly fabricated from the AlFe 2 B 2 compound.

36 MATERIALS SCIENCE↗