SEARCH · Engineering Papers

Results for “error performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Cassini Maneuver Performance Assessment and Execution-Error Modeling Through 2015

In its twelfth year touring Saturn, the Cassini spacecraft continues to gather valuable scientific data about the planet and its moons. Cassini has executed a total of 331 propulsive maneuvers through January 23, 2016. With more than 30 maneuvers planned through July 2017 before the mission ends in September 2017, a dwindling propellant supply has become a chief concern. This manuscript will report on the analysis of Cassini maneuvers performed through December 30, 2015 and recommend execution-error models for the remainder of the mission. Maneuver performance assessment techniques and execution-error model development methods will also be outlined.

Wagner, Sean V.↗

NASA NTRS2016

Cassini Maneuver Performance Assessment and Execution-Error Modeling Through 2015

Wagner, Sean V.↗

NASA NTRS1974

A Markov model for NASA's Ground Communications Facility

A 'natural' way of constructing finite-state Markov chains (FSMC) is presented for those noise burst channels that can be modeled by them. In particular, a five-state Markov chain is given as a model of errors occurring at the Ground Communications Facility (GCF). A maximum likelihood procedure applicable to any FSMC is developed for estimating all the model parameters starting from the data of error runs. A few of the statistics important for estimating the performance of error control strategies on the channel are provided.

Adeyemi, O.↗

NASA NTRS1992

Self-checking self-repairing computer nodes using the mirror processor

Circuitry added to fault-tolerant systems for concurrent error deduction usually reduces performance. Using a technique called micro rollback, it is possible to eliminate most of the performance penalty of concurrent error detection. Error detection is performed in parallel with intermodule communication, and erroneous state changes are later undone. The author reports on the design and implementation of a VLSI RISC microprocessor, called the Mirror Processor (MP), which is capable of micro rollback. In order to achieve concurrent error detection, two MP chips operate in lockstep, comparing external signals and a signature of internal signals every clock cycle. If a mismatch is detected, both processors roll back to the beginning of the cycle when the error occurred. In some cases the erroneous state is corrected by copying a value from the fault-free processor to the faulty processor. The architecture, microarchitecture, and VLSI implementation of the MP, emphasizing its error-detection, error-recovery, and self-diagnosis capabilities, are described.

Tamir, Yuval↗

NASA NTRS1992

A real-time diagnostic and performance monitor for UNIX

There are now over one million UNIX sites and the pace at which new installations are added is steadily increasing. Along with this increase, comes a need to develop simple efficient, effective and adaptable ways of simultaneously collecting real-time diagnostic and performance data. This need exists because distributed systems can give rise to complex failure situations that are often un-identifiable with single-machine diagnostic software. The simultaneous collection of error and performance data is also important for research in failure prediction and error/performance studies. This paper introduces a portable method to concurrently collect real-time diagnostic and performance data on a distributed UNIX system. The combined diagnostic/performance data collection is implemented on a distributed multi-computer system using SUN4's as servers. The approach uses existing UNIX system facilities to gather system dependability information such as error and crash reports. In addition, performance data such as CPU utilization, disk usage, I/O transfer rate and network contention is also collected. In the future, the collected data will be used to identify dependability bottlenecks and to analyze the impact of failures on system performance.

Dong, Hongchao↗

NASA NTRS1972

A Monte Carlo error analysis program for near-Mars, finite-burn, orbital transfer maneuvers

A computer program was developed which performs an error analysis of a minimum-fuel, finite-thrust, transfer maneuver between two Keplerian orbits in the vicinity of Mars. The method of analysis is the Monte Carlo approach where each off-nominal initial orbit is targeted to the desired final orbit. The errors in the initial orbit are described by two covariance matrices of state deviations and tracking errors. The function of the program is to relate these errors to the resulting errors in the final orbit. The equations of motion for the transfer trajectory are those of a spacecraft maneuvering with constant thrust and mass-flow rate in the neighborhood of a single body. The thrust vector is allowed to rotate in a plane with a constant pitch rate. The transfer trajectory is characterized by six control parameters and the final orbit is defined, or partially defined, by the desired target parameters. The program is applicable to the deboost maneuver (hyperbola to ellipse), orbital trim maneuver (ellipse to ellipse), fly-by maneuver (hyperbola to hyperbola), escape maneuvers (ellipse to hyperbola), and deorbit maneuver.

Green, R. N.↗

NASA NTRS1982

Analysis of space telescope data collection system

An analysis of the expected performance for the Multiple Access (MA) system is provided. The analysis covers the expected bit error rate performance, the effects of synchronization loss, the problem of self-interference, and the problem of phase ambiguity. The problem of false acceptance of a command word due to data inversion is discussed. A mathematical determination of the probability of accepting an erroneous command word due to a data inversion is presented. The problem is examined for three cases: (1) a data inversion only, (2) a data inversion and a random error within the same command word, and a block (up to 256 48-bit words) containing both a data inversion and a random error.

Ingels, F. M.↗

NASA NTRS1975

Dispersion analysis and linear error analysis capabilities of the space vehicle dynamics simulation program

Previous error analyses conducted by the Guidance and Dynamics Branch of NASA have used the Guidance Analysis Program (GAP) as the trajectory simulation tool. Plans are made to conduct all future error analyses using the Space Vehicle Dynamics Simulation (SVDS) program. A study was conducted to compare the inertial measurement unit (IMU) error simulations of the two programs. Results of the GAP/SVDS comparison are presented and problem areas encountered while attempting to simulate IMU errors, vehicle performance uncertainties and environmental uncertainties using SVDS are defined. An evaluation of the SVDS linear error analysis capability is also included.

Snow, L. S.↗

NASA NTRS1986

Performance of PLL synchronized optical PPM communication systems

Receiver timing synchronization of an optical PPM communication system can be achieved using a phase-locked loop (PLL) if the photodetector output is properly processed. The synchronization performance is shown to improve with increasing signal power and decreasing loop bandwidth. The bit error rate performance of the PLL synchronized PPM system is analyzed and compared to that of the perfectly synchronized system. It is shown that the increase in signal power needed to compensate for the imperfect sychronization is small (less than 0.1 dB) for loop bandwidths less than 0.1 percent of the slot frequency.

Chen, C.-C.↗

NASA NTRS2012

Determination of Barometric Altimeter Errors for the Orion Exploration Flight Test-1 Entry

The Exploration Flight Test 1 (EFT-1) mission is the unmanned flight test for the upcoming Multi-Purpose Crew Vehicle (MPCV). During entry, the EFT-1 vehicle will trigger several Landing and Recovery System (LRS) events, such as parachute deployment, based on on-board altitude information. The primary altitude source is the filtered navigation solution updated with GPS measurement data. The vehicle also has three barometric altimeters that will be used to measure atmospheric pressure during entry. In the event that GPS data is not available during entry, the altitude derived from the barometric altimeter pressure will be used to trigger chute deployment for the drogues and main parachutes. Therefore it is important to understand the impact of error sources on the pressure measured by the barometric altimeters and on the altitude derived from that pressure. The error sources for the barometric altimeters are not independent, and many error sources result in bias in a specific direction. Therefore conventional error budget methods could not be applied. Instead, high fidelity Monte-Carlo simulation was performed and error bounds were determined based on the results of this analysis. Aerodynamic errors were the largest single contributor to the error budget for the barometric altimeters. The large errors drove a change to the altitude trigger setpoint for FBC jettison deploy.

Brown, Denise L.↗

NASA NTRSDate not supplied

Assessing Utility of Different Orbits for a Lunar PNT Constellation

"As the Artemis program establishes a long-term presence on the lunar surface, lunar surface users will need an accurate source of Position, Navigation, and Timing (PNT). Under the LunaNet framework, NASA has proposed the Lunar Navigation System (LNS), a constellation of satellites in lunar orbit which will broadcast LunaNet’s Augmented Forward Signal (AFS) [1] to the lunar surface. LNS will have the objective of providing user position accuracies of 10 m and timing accuracies of 10 microseconds on the lunar surface and up to 200 km above the surface. Several classes of orbits are possibilities for the LNS constellation, including circular orbits, eccentric orbits, and various families of 3-body orbits. Each of these orbit classes have both advantages and disadvantages in their utility as PNT constellations. In this study we examine a wide variety of potential LNS constellations and evaluate their performance against several metrics, including: a. Dilution of Precision (DOP) performance over the lunar service volume and the South Pole region, during both the constellation buildup and after the constellation is completed. b. Number of satellites required to achieve required DOP performance. c. Relative dynamics of LNS satellites with respect to surface users. d. Signal in space error (SISE) performance, assuming orbit determination that includes the Global Positioning System (GPS), crosslinks, and monitor sites on the surface of the moon. e. Constellation insertion, station keeping, and disposal costs. f. Specific Concept of Operations (CONOPS) and engineering challenges associated with establishing and operating the constellations. (E.g., frequent station keeping, variable signal strength, divergent CONOPS for different planes of the constellation.) The system’s performance is considered both independently and in combination with other proposed systems, such as NASA’s Lunar Communication Relay and Navigation System (LCRNS) and ESA’s Moonlight constellation. The study concludes that a 3-plane Walker constellation at 6 lunar radii (slightly higher than GPS’s 4.2 earth radii from a geometry perspective, but significantly closer in an absolute sense) is a good candidate for the LNS constellation, providing the user with good SISE and DOP performance, while not requiring excessive station keeping or complex CONOPS. However, other viable concepts exist and could be chosen if early South Pole coverage is a driving factor in the system design."

navigation↗

NASA NTRS1981

Cumulative hardware distortion effects on coded and uncoded performance via a satellite repeater

An analytical investigation is presented of the cumulative impact of numerous hardware-induced distortions on BPSK bit-error-rate performance. Attention is given to 16 user and eight transponder constraints, as well as to the effect of filter bandlimiting. Uncoded and coded performance is evaluated with respect to both NRZ and Manchester signaling formats, and tight upper bounds to coded and uncoded SNR degradation are determined. Computed results based on TDRSS (Tracking and Data Relay Satellite System) specifications are presented as an example.

Benjamin, T.↗

NASA NTRS1975

Detection of digital FSK using a phase-locked loop

A theory is presented for the design of a digital FSK receiver which employs a phase-locked loop to set up the desired matched filter as the arriving signal frequency switches. The developed mathematical model makes it possible to establish the error probability performance of systems which employ a class of digital FM modulations. The noise mechanism which accounts for decision errors is modeled on the basis of the Meyr distribution and renewal Markov process theory.

Lindsey, W. C.↗

NASA NTRS1988

Automatically generated acceptance test: A software reliability experiment

This study presents results of a software reliability experiment investigating the feasibility of a new error detection method. The method can be used as an acceptance test and is solely based on empirical data about the behavior of internal states of a program. The experimental design uses the existing environment of a multi-version experiment previously conducted at the NASA Langley Research Center, in which the launch interceptor problem is used as a model. This allows the controlled experimental investigation of versions with well-known single and multiple faults, and the availability of an oracle permits the determination of the error detection performance of the test. Fault interaction phenomena are observed that have an amplifying effect on the number of error occurrences. Preliminary results indicate that all faults examined so far are detected by the acceptance test. This shows promise for further investigations, and for the employment of this test method on other applications.

Protzel, Peter W.↗

NASA NTRS2011

Cassini Orbit Trim Maneuvers at Saturn - Overview of Attitude Control Flight Operations

The Cassini spacecraft has been in orbit around Saturn since July 1, 2004. To remain on the planned trajectory which maximizes science data return, Cassini must perform orbit trim maneuvers using either its main engine or its reaction control system thrusters. Over 200 maneuvers have been executed on the spacecraft since arrival at Saturn. To improve performance and maintain spacecraft health, changes have been made in maneuver design command placement, in accelerometer scale factor, and in the pre-aim vector used to align the engine gimbal actuator prior to main engine burn ignition. These and other changes have improved maneuver performance execution errors significantly since 2004. A strategy has been developed to decide whether a main engine maneuver should be performed, or whether the maneuver can be executed using the reaction control system.

spacecraft configuration↗

NASA NTRS1979

A tactual display aid for primary flight training

A means of flight instruction is discussed. In addition to verbal assistance, control feedback was continously presented via a nonvisual means utilizing touch. A kinesthetic-tactile (KT) display was used as a readout and tracking device for a computer generated signal of desired angle of attack during the approach and landing. Airspeed and glide path information was presented via KT or visual heads up display techniques. Performance with the heads up display of pitch information was shown to be significantly better than performance with the KT pitch display. Testing without the displays showed that novice pilots who had received tactile pitch error information performed both pitch and throttle control tasks significantly better than those who had received the same information from the visual heads up display of pitch during the test series of approaches to landing.

Gilson, R. D.↗

NASA NTRS1981

Advances in Serial MSK modems

Lumped element as well as distributed element networks are used in the Serial MSK (SMSK) modems, for 20-1000 Mbps data rate range applications, whose design and performance characteristics are described. It is noted that the use of baseband conversion filters for the modulator yields good performance in many applications, with typical matched filter designs (structurally simple to implement) causing less than 0.5 dB bit error rate performance degradation. The SMSK modem technique begins with the use of a biphased shift-keyed modulator, and then employs passive filters to obtain the MSK signal.

Ryan, C. R.↗

NASA NTRS1992

Analysis of space environment effects on active fiber optic links orbited aboard the LDEF

The interim analysis correlates the results of the 'Preliminary Analysis of WL Experiment no. 701, Space Environment Effects on Operating Optic Systems' (NASA Report CP-3134) with space simulated post retrieval terrestrial studies performed on the M0004 experiment. Temperature cycling measurements were performed on the active optical data links for the purpose of assessing link signal to noise ratio and bit error rate performance some 69 months following the experiment deployment in low earth orbit. The early results indicate a high correlation between pre-orbit, orbit recorded, and post orbit functionality of the first known and longest space demonstration of operating optic fibers.

Monarski, T. W.↗