Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “epitaxial interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Gate-tunable enhancement of supercurrent in hybrid planar Josephson junctions

Planar Josephson junctions (JJs) have emerged as a promising platform for the realization of topological superconductivity and Majorana zero modes. To obtain robust quasi one-dimensional (1D) topological superconducting states using planar JJs, limiting the number of 1D Andreev bound states’ subbands that can be present, and increasing the size of the topological superconducting gap are two fundamental challenges. It has been suggested that both problems can be addressed by properly designing the interfaces between the JJ’s normal region and the superconducting leads. We fabricated Josephson junctions with periodic hole structures on the superconducting contact leads on InAs heterostructures with epitaxial superconducting Al. By depleting the chemical potential inside the holes region with a top gate, we observed an enhancement of the supercurrent across the junction. The theoretical analysis shows that the enhancement of the JJ’s critical current is achieved when the depletion of the holes is such to optimize the matching of quasiparticles’ wave function at the normal/superconductor interface. Furthermore, these results show how the combination of carefully designed patterns for the Al coverage, and external gates, can be successfully used to tune the density and wave functions’ profiles in the normal region of the JJ, and therefore open an avenue to tune some of the critical properties, such as number of subbands and size of the topological gap, that must be optimized to obtain robust quasi-1D superconducting states supporting Majorana bound states.

Bogoliubov-de Gennes equations↗
DOE OSTI2022

Molecular beam homoepitaxy of N-polar AlN: Enabling role of aluminum-assisted surface cleaning

N-polar aluminum nitride (AlN) is an important building block for next-generation high-power radio frequency electronics. We report successful homoepitaxial growth of N-polar AlN by molecular beam epitaxy (MBE) on large-area, cost-effective N-polar AlN templates. Direct growth without any in situ surface cleaning leads to films with inverted Al polarity. It is found that Al-assisted cleaning before growth enables the epitaxial film to maintain N-polarity. The grown N-polar AlN epilayer with its smooth, pit-free surface duplicates the structural quality of the substrate, as evidenced by a clean and smooth growth interface with no noticeable extended defects generation. Near band-edge photoluminescence peaks are observed at room temperature on samples with MBE-grown layers but not on the bare AlN templates, implying the suppression of nonradiative recombination centers in the epitaxial N-polar AlN.

42 ENGINEERING↗
DOE OSTI2026

An integrated in-situ coordination strategy enabling high-performance layered cathodes for sodium-ion batteries

O3-type layered transition metal oxide cathodes hold tremendous potential in sodium-ion batteries (SIBs) due to their low cost and high energy density. However, the structure instability associated with detrimental phase transitions and severe interface parasitic reactions exacerbate the material's electrochemical performance degradation. Herein, we develop an integrated in-situ coordination strategy via heteroatomic modulation inducing coherent epitaxial layer to collaboratively enhance the overall framework robustness from surface to bulk. The theoretical calculation and multiple in/ex-situ characterizations demonstrate the charge density around oxygen is redistributed, which promotes the electron localization, thus widening the NaO 2 lattice space and accelerating the Na + transport dynamics. Furthermore, the formed strengthened oxygen bond energy effectively distributes the long-range coordination of Mn 3+ O 6 octahedron, thereby alleviating Jahn-Teller distortion and local stress. Importantly, the in-situ formed conformal buffer layer dramatically relieves the adverse interface side reactions, facilitating the construction of robust cathode-electrolyte interface, which ameliorate the whole structure stability of designed materials. Consequently, the optimized NFMZ@NZO-1.0 exhibits the excellent cycling stability with 80.2% capacity retention after 300 cycles at 1C, and delivers a high discharge capacity of 107.1 mAh g −1 at 10C. In conclusion, this distinctive coupling strategy provides valuable insights for developing high-performance layered cathode materials in SIBs.

Coherent epitaxial layer↗
DOE OSTI2022

Self-healing Growth of LaNiO 3 on a Mixed-Terminated Perovskite Surface

Developing atomic-scale synthesis control is a prerequisite for understanding and engineering the exotic physics inherent to transition-metal oxide heterostructures. Thus, far, however, the number of materials systems explored has been extremely limited, particularly with regard to the crystalline substrate, which is routinely SrTiO 3 . Here, we investigate the growth of a rare-earth nickelate-LaNiO 3 -on (LaAlO 3 )(Sr 2 AlTaO 6 ) (LSAT) (001) by oxide molecular beam epitaxy (MBE). Whereas the LSAT substrates are smooth, they do not exhibit the single surface termination usually assumed necessary for control over the interface structure. Performing both nonresonant and resonant anomalous in situ synchrotron surface X-ray scattering during MBE growth, we show that reproducible heterostructures can be achieved regardless of both the mixed surface termination and the layer-by-layer deposition sequence. The rearrangement of the layers occurs dynamically during growth, resulting in the fabrication of high-quality LaNiO 3 /LSAT heterostructures with a sharp and consistent interfacial structure. This is due to the thermodynamics of the deposition window as well as the nature of the chemical species at interfaces-here, the flexible charge state of nickel at the oxide surface. This has important implications regarding the use of a wider variety of substrates for fundamental studies on complex oxide synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Studies of molecular-beam epitaxy growth of GaAs on porous Si substrates

GaAs has been grown on porous Si directly and on Si buffer layer-porous Si substrates by molecular-beam epitaxy. In the case of GaAs growth on porous Si, transmission electron microscopy (TEM) reveals that the dominant defects in GaAs layers grown on porous Si are microtwins and stacking faults, which originate from the GaAs/porous Si interface. GaAs is found to penetrate into the porous Si layers. By using a thin Si buffer layer (50 nm), GaAs penetration diminishes and the density of microtwins and stacking faults is largely reduced and localized at the GaAs/Si buffer interface. However, there is a high density of threading dislocations remaining. Both Si (100) aligned and four degree tilted substrates have been examined in this study. TEM results show no observable effect of the tilted substrates on the quality of the GaAs epitaxial layer.

Mii, Y. J.↗
DOE OSTI2020

Experimental determination of electron attenuation lengths in complex materials by means of epitaxial film growth: advantages and challenges

Accurate electron attenuation lengths are of critical importance in using electron spectroscopic methods to quantitatively characterize complex materials. Here we show that analysis of core-level and valence-band x-ray photoelectron spectra excited with monochromatic AlK? x-rays from the substrate and measured as a function of film thickness can be used to determine electron attenuation lengths in epitaxial SrTiO3 films on Ge(001). Closely lattice-matched epitaxial heterojunctions are ideal systems for determining attenuation lengths provided the films grow in a layer-by-layer fashion, leading to atomically flat surfaces, and the buried interfaces are atomically abrupt. In principle, either the rate of attenuation of substrate peak intensities or the rate of increase of film peak intensities can be used for this purpose. However, we find that structural nonuniformities in the films reduce the accuracy of electron attenuation lengths determined from photoelectrons that originate within the films. A more reliable source of information is found in photoelectrons from the substrate which traverse the film. By using the energy dependence of calculated electron attenuation lengths from the NIST database in combination with Ge 3d core and Ge-derived valence band intensities, we determine electron attenuation length as a function of kinetic energy for SrTiO3.

Chambers, Scott A.↗
DOE OSTI2026

Strain-stabilized interfacial polarization tunes work function over 1 eV in RuO 2 /TiO 2 heterostructures

Interfacial polarization – charge accumulation at the heterointerface – is a well-established tool in semiconductors, but its influence in metals remains unexplored. Here, we demonstrate that interfacial polarization can robustly modulate surface work function in metallic rutile RuO 2 layers in epitaxial RuO 2 /TiO 2 heterostructures grown by hybrid molecular beam epitaxy. Using multislice electron ptychography, we directly visualize polar displacements of transition metal ions relative to oxygen octahedra near the interface, despite the conductive nature of RuO 2 . This interfacial polarization enables over 1 eV modulation of the RuO 2 work function, controlled by small thickness variations (2-3 nm), as measured by Kelvin probe force microscopy, with a critical thickness of ~4 nm – corresponding to the transition from fully-strained to relaxed film. These results establish interfacial polarization as a powerful route to control electronic properties in metals and have implications for designing tunable electronic, catalytic, and quantum devices through interfacial control in polar metallic systems.

Electronic properties and materials↗
DOE OSTI2022

Electronic reconstruction at the polar (111)-oriented oxide interface

Atomically flat (111) interfaces between insulating perovskite oxides provide a landscape for new electronic phenomena. For example, the graphene-like coordination between interfacial metallic ion layer pairs can lead to topologically protected states [Xiao et al., Nat. Commun. 2, 596 (2011) and A. Rüegg and G. A. Fiete, Phys. Rev. B 84, 201103 (2011)]. The metallic ion/metal oxide bilayers that comprise the unit cell of the perovskite (111) heterostructures require the interface to be polar, generating an intrinsic polar discontinuity [Chakhalian et al., Nat. Mater. 11, 92 (2012)]. Here, we investigate epitaxial heterostructures of (111)-oriented LaAlO 3 /SrTiO 3 (LAO/STO). We find that during heterostructure growth, the LAO overlayer eliminates the structural reconstruction of the STO (111) surface with an electronic reconstruction, which determines the properties of the resulting two-dimensional conducting gas. This is confirmed by transport measurements, direct determination of the structure and atomic charge from coherent Bragg rod analysis, and theoretical calculations of electronic and structural characteristics. Interfacial behaviors of the kind discussed here may lead to new growth control parameters useful for electronic devices.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Characteristics of annealed p/n junctions between GaAs and Si(100)

Electrical characteristics of a GaAs(p)/Si(n) interface were determined from capacitance-voltage, current-voltage, and secondary ion mass spectroscopy (SIMS) measurements and compared to those on GaAs(p) epitaxial layers on GaAs(n) substrates. The comparison was made between the junctions as grown, and after an anneal at 850 C for 20 min in 10 percent forming gas under an As overpressure. For the GaAs/Si junction the ideality factor changed from 2 or larger to 1.5 and the apparent intercept voltage changed from 2.5 to 1.3 V after annealing. For the GaAs homojunction, the intercept voltage increased from 1.1 to 1.3 V. In addition, the excess current in the forward and reverse bias conditions dropped drastically in the heterojunction. No movement of the metallurgical junction was discernible to within the resolution capability of SIMS. The junction properties obtained by annealing suggest an atomic restructuring of the Si(100) interface during growth or annealing. These new results raise the possibility that the GaAs/Si interface can be made into an electrically viable junction and incorporated into active devices.

Unlu, M. S.↗
DOE OSTI2022

In situ Study on the Evolution of Atomic and Electronic Structure of LaTiO 3 /SrTiO 3 System

As with other transition-metal oxide interfaces, LaTiO 3 /SrTiO 3 interfaces exhibit interesting electronic properties, such as a two-dimensional electron gas. While the available Mott states and multiple pathways to metallicity in LaTiO 3 can lead to a variety of applications in oxide electronics, the origin of the different properties remains uncertain. Herein, utilizing real-time, in situ x-ray diffraction at the synchrotron, robust but thin LaTiO 3 /SrTiO 3 heterostructures were fabricated using oxide molecular beam epitaxy. A thickness of six unit cells was determined to be critical, at which point the LaTiO 3 /SrTiO 3 heterostructures begin to sustain sharp, well-defined interfaces. The layers of LaTiO 3 and SrTiO 3 were sufficiently thin to benefit from the finite escape length of electrons at resonant soft x-ray photoemission, and the heterostructures were transferred in vacuo after growth to another chamber for synchrotron-based x-ray photoemission spectroscopy studies. With the x-ray energy tuned to the Ti-2p resonance, the LaTiO 3 /SrTiO 3 interfaces could be probed with enough penetration depth and selectivity. It is shown that all of the heterointerfaces exhibit the two-dimensional electron gas.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Investigation of design principles for metal-binding and conductive protein assemblies

Throughout the lifetime of this initiative, including renewals, we focused on understanding the fundamental principles of protein-protein interface design that enable predictable and modular spatial and kinetic control of multi-component protein self-assembly in 1D, 2D, and 3D, including the interface with inorganic materials, small molecules, and metal ions. We designed individual protein components that bind specific metal ions, including REEs and transport ions across lipid membranes. We created helical 1D filaments of repeating units with programmed periodicity, pitch, and multi-component environmentally responsive self-assembling protein fibers. We showed that these filaments reversibly assemble and disassemble under specific pH conditions and created end-specific caps that independently tune the balance of attachment and detachment rates at each terminus of the filament. Using similar filaments, we succeeded in binding arrays of heme and chlorophyll molecules and assembling patterned helical coatings around carbon nanotubes in efforts to create de novo conductive nanowires. By arraying REE binding sites in a large circular tandem array with a repeat protein-based cyclic oligomer, we created a molecular scaffold for superradiance and paramagnetic quantum sensing. We created a range of one-component and two-component self-assembling 2D arrays and showed that when designed to engage cell receptors, these arrays can control cell behavior from outside the cell signal to inside the cell. We designed helical repeat proteins with variable lengths displaying charged residues in a pattern matched to the cation lattice of mica. achieved a range of ordered states with an epitaxial match to the underlying crystal lattice. We further applied the learned principles of protein-induced biomineralization to design proteins with an interface lattice matching CaCO 3 and guide the formation of specific crystal forms of CaCO 3 from solution, a significant advance toward the global need to manage carbon. In all cases of mineral lattice matching and biomineralization, we followed assembly using molecularly resolved in situ AFM imaging and extracted information about assembly pathways and energetics, applying deep learning to quantify the dynamics of protein self-organization. We developed techniques for using dynamic metal-dependent interfaces on protein nanopores for discriminatively sensing dilute REEs in solution and demonstrated the use of strong metal-binding interfaces to drive nanocage disassembly for conditional nanocompartmentalization applications. This grant supported 11 people, including Asim Bera, Evans Brackenbrough, Andrew Borst, Nikita Hanikel, Timothy Huddy, Emily Joyce, Alex Young-Seug Kang, Ryan Kibler, Joshua Morris Lubner, Harley Pyles, and Shuai Zhang. The research effort culminated in the production of published papers and theses. Electronic Thesis/Dissertation are distributed by ProQuest/UMI Dissertation Publishing and made available on an open access basis through UW Libraries ResearchWorks Service.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

2D Vacancy Confinement in Anatase TiO 2 for Enhanced Photocatalytic Activities

Abstract Light‐driven energy conversion devices call for the atomic‐level manipulation of defects associated with electronic states in solids. However, previous approaches to produce oxygen vacancy (V O ) as a source of sub‐bandgap energy levels have hampered the precise control of the distribution and concentration ofV O . Here, a new strategy to spatially confineV O at the homo‐interfaces is demonstrated by exploiting the sequential growth of anatase TiO 2 under dissimilar thermodynamic conditions. Remarkably, metallic behavior with high carrier density and electron mobility is observed after sequential growth of the TiO 2 films under low pressure and temperature (L‐TiO 2 ) on top of high‐quality anatase TiO 2 epitaxial films (H‐TiO 2 ), despite the insulating properties of L‐TiO 2 and H‐TiO 2 single layers. Multiple characterizations elucidate that theV O layer is geometrically confined within 4 unit cells at the interface, along with low‐temperature crystallization of upper L‐TiO 2 films; this 2DV O layer is responsible for the formation of in‐gap states, promoting photocarrier lifetime (≈300%) and light absorption. These results suggest a synthetic strategy to locally confine functional defects and emphasize how sub‐bandgap energy levels in the confined imperfections influence the kinetics of light‐driven catalytic reactions.

Chemistry↗
DOE OSTI2020

A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel

Epitaxial columnar grain growth is a prevalent microstructural feature in the additive manufacturing (AM) of metal components such as Inconel, with cubic unit cell crystal lattice structure (face centered cubic (FCC) or body centered cubic (BCC)). These columnar grains evolve from the partly molten grains in the substrate or the solidified metal. This work proposes an efficient model to simulate the competitive growth of epitaxial columnar dendritic grains. The proposed model tracks the dynamic changes in the dendrites emanating from discrete points along the solid/liquid interface of a quasi-steady melt pool (MP). These dynamic changes include convergence and divergence of growing dendrites. The model is extended to predict the microstructure of large 3D parts and experimentally validated by comparing the simulation results for laser powder bed fusion (L-PBF) and wire-arc additive manufacturing (WAAM) processes. The microstructure and pole figures are predicted for Inconel 718 samples produced by L-PBF and Inconel 740H samples produced by WAAM processes. Finally, the model predictions compare well with the observed microstructure and pole figures results for both the L-PBF and WAAM processes.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Imaging interfacial topography with coherent x-ray reflectivity

The use of coherent x-ray reflectivity to image interfaces is illustrated using model calculations for three cases: a thin film, a semi-infinite substrate, and a coherently strained epitaxial thin film. The intensities and phases of the coherent scattering signals are calculated based on a fully atomistic model (where the phases are assumed to have been recovered by a phasing algorithm). Here, we describe the characteristics of the effective density that are obtained by direct inverse Fourier transformation of the complex structure factors, using a window function to define the data range. These effective densities include significant artifacts like oscillations and negative values derived from the finite vertical momentum transfer of the window function. Two approaches are described to extract the surface topography from the effective densities for three-dimensional visualization: (i) multiplying the effective density by a phase factor and (ii) analyzing the data as a hybrid structure factor F(x, Q z ). The explicit surface sensitivity and specificity of measurements is illustrated when the film or substrate Bragg peaks are excluded. These considerations show that images of interfacial topography can be obtained using currently available experimental capabilities with parameters corresponding to epitaxial thin films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

Long-wavelength PTSI infrared detectors and method of fabrication thereof

Extended cutoff wavelengths of PtSi Schottky infrared detectors in the long wavelength infrared (LWIR) regime have been demonstrated for the first time. This result was achieved by incorporating a 1-nm-thick p+ doping spike at the PtSi/Si interface. The extended cutoff wavelengths resulted from the combined effects of an increased electric field near the silicide/Si interface due to the p+ doping spike and the Schottky image force. The p+ doping spikes were grown by molecular beam epitaxy at 450 degrees Celsius using elemental boron as the dopant source, with doping concentrations ranging from 1.times.10.sup.19 to 1.times.10.sup.21 cm.sup.-3. The cutoff wavelengths were shown to increase with increasing doping concentrations of the p+ spikes.

Lin, True-Lon↗
DOE OSTI2022

Molecular Beam Epitaxy (MBE) Growth of Model Cathodes to Study Interfacial Ion Diffusion

Lithium-ion batteries (LIBs) have been the focus of research for decades owing to their superior energy storage potential and wide range of applications. However, long-term stability issues still persist in LIB cathodes as the result of the formation of a solid electrolyte interface (SEI), structural transformations, or the loss of active cathode materials. In nanoscale cathodes, it is often impossible to isolate, let alone mitigate the causes of the observed capacity loss. Herein, a novel approach is presented to synthesizing LIB cathode model systems using thin-film molecular beam epitaxy (MBE). Specifically, 100 nm thick LiMn 2 O 4 (LMO) thin-film cathodes are grown on SrRuO 3 /SrTiO 3 (100) single-crystal substrates and characterized in their pristine and cycled states. The pristine thin films exhibit the electro-chemical cycling behavior and structural evolution previously seen in bulk LMO cathodes. The formation of surface-layer rocksalt MnO and spinel Mn 3 O 4 along with the mass-loss associated with the corrosion of active Mn ions is also reported. It is, therefore, demonstrated that these MBE-grown model systems can be used for detailed studies of their surface structures and the electrode/electrolyte interfacial evolution in LIB cathodes, leading to the development of materials for rechargeable batteries with higher capacity and better stability.

25 ENERGY STORAGE↗
DOE OSTI2026

Materials Studies of Niobium Thin Films for Quantum Circuit Applications: Progress and Challenges

Niobium (Nb) films have emerged as a crucial material in the development of superconducting qubits, which are key components in quantum computing technology. Here, this review provides a comprehensive examination of Nb films from a materials perspective, focusing on their intrinsic properties, fabrication methods/techniques, and their influence on qubit performance, particularly through surface and interface driven loss mechanisms. We discuss the key material properties that are essential for qubit operation. Various deposition techniques for Nb thin films, such as sputtering, evaporation, molecular beam epitaxy, and atomic layer deposition, are explored, alongside their impact on film quality, uniformity, and qubit performance. Additionally, the influence of surface roughness, thin-film thickness, and substrate materials on quantum coherence is analyzed. Challenges such as defects and material degradation in Nb films are reviewed, along with strategies to mitigate these issues. Finally, we present the latest advancements and future directions in Nb film research, including potential improvements to enhance qubit coherence and scalability for large-scale quantum computing systems. Ultimately, a deeper understanding of surface and interface phenomena is essential for pushing the limits of qubit performance and realizing next-generation quantum technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Defect‐Free Nanowelding of Bilayer SnSe Nanoplates

Nanowelding is a bottom‐up technique to create custom‐designed nanostructures and devices beyond the precision of lithographic methods. Here, a new technique is reported based on anisotropic lubricity at the van der Waals interface between monolayer and bilayer SnSe nanoplates and a graphene substrate to achieve precise control of the crystal orientation and the interface during the welding process. As‐grown SnSe monolayer and bilayer nanoplates are commensurate with graphene's armchair direction but lack commensuration along graphene's zigzag direction, resulting in a reduced friction along that direction and a rail‐like, 1D movement that permits joining nanoplates with high precision. This way, molecular beam epitaxially grown SnSe nanoplates of lateral sizes 30–100 nm are manipulated by the tip of a scanning tunneling microscope at room temperature. In situ annealing is applied afterward to weld contacting nanoplates without atomic defects at the interface. This technique can be generalized to any van der Waals interfaces with anisotropic lubricity and is highly promising for the construction of complex quantum devices, such as field effect transistors, quantum interference devices, lateral tunneling junctions, and solid‐state qubits.

2D ferroelectrics↗