Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrostatic atomizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Arginine Interactions with Anatase TiO2 (100) Surface and the Perturbation of 49Ti NMR Chemical Shifts - A DFT Investigation: Relevance to Renu-Seeram Bio Solar Cell

Density functional theoretical calculations have been utilized to investigate the interaction of the amino acid arginine with the (100) surface of anatase and the reproduction of experimentally measured 49Ti NMR chemical shifts of anatase. Significant binding of arginine through electrostatic interaction and hydrogen bonds of the arginine guanidinium protons to the TiO2 surface oxygen atoms is observed, allowing attachment of proteins to titania surfaces in the construction of bio-sensitized solar cells. GIAO-B3LYP/6-31G(d) NMR calculation of a three-layer model based on the experimental structure of this TiO2 modification gives an excellent reproduction of the experimental value (-927 ppm) within +/- 7 ppm, however, the change in relative chemical shifts, EFGs and CSA suggest that the effect of the electrostatic arginine binding might be too small for experimental detection.

08 HYDROGEN↗

Compact and high-particle-flux thermal-lithium-beam probe system for measurement of two-dimensional electron density profile

A compact and high-particle-flux thermal-lithium-beam source for two-dimensional measurement of electron density profiles has been developed. The thermal-lithium-beam oven is heated by a carbon heater. In this system, the maximum particle flux of the thermal lithium beam was ∼4 × 10{sup 19} m{sup −2} s{sup −1} when the temperature of the thermal-lithium-beam oven was 900 K. The electron density profile was evaluated in the small tokamak device HYBTOK-II. The electron density profile was reconstructed using the thermal-lithium-beam probe data and this profile was consistent with the electron density profile measured with a Langmuir electrostatic probe. We confirm that the developed thermal-lithium-beam probe can be used to measure the two-dimensional electron density profile with high time and spatial resolutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

VISIONS: Remote Observations of a Spatially-Structured Filamentary Source of Energetic Neutral Atoms near the Polar Cap Boundary During an Auroral Substorm

We report initial results from the VISualizing Ion Outflow via Neutral atom imaging during a Substorm (VISIONS) rocket that flew through and near several regions of enhanced auroral activity and also sensed regions of ion outflow both remotely and directly. The observed neutral atom fluxes were largest at the lower energies and generally higher in the auroral zone than in the polar cap. In this paper, we focus on data from the latter half of the VISIONS trajectory when the rocket traversed the polar cap region. During this period, many of the energetic neutral atom spectra show a peak at 100 electronvolts. Spectra with peaks around 100 electronvolts are also observed in the Electrostatic Ion Analyzer (EIA) data consistent with these ions comprising the source population for the energetic neutral atoms. The EIA observations of this low energy population extend only over a few tens of kilometers. Furthermore, the directionality of the arriving energetic neutral atoms is consistent with either this spatially localized source of energetic ions extending from as low as about 300 kilometers up to above 600 kilometers or a larger source of energetic ions to the southwest.

Polar Cap↗

Quantitative analysis of charge injection and discharging of Si nanocrystals and arrays by electrostatic force microscopy

NASA requirements for computing and memory for microspacecraft emphasizes high density, low power, small size, and radiation hardness. The distributed nature of a storage elements in nanocrystal floating-gate memories leads to instrinsic fault tolerance and radiation-hardness. Nanocrystal-based memories also offer the possibility of a faster, lower power operation.

atomic↗

Characterization of individual molecular adsorption geometries by atomic force microscopy: Cu-TCPP on rutile TiO{sub 2} (110)

Functionalized materials consisting of inorganic substrates with organic adsorbates play an increasing role in emerging technologies like molecular electronics or hybrid photovoltaics. For such applications, the adsorption geometry of the molecules under operating conditions, e.g., ambient temperature, is crucial because it influences the electronic properties of the interface, which in turn determine the device performance. So far detailed experimental characterization of adsorbates at room temperature has mainly been done using a combination of complementary methods like photoelectron spectroscopy together with scanning tunneling microscopy. However, this approach is limited to ensembles of adsorbates. In this paper, we show that the characterization of individual molecules at room temperature, comprising the determination of the adsorption configuration and the electrostatic interaction with the surface, can be achieved experimentally by atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). We demonstrate this by identifying two different adsorption configurations of isolated copper(II) meso-tetra (4-carboxyphenyl) porphyrin (Cu-TCPP) on rutile TiO{sub 2} (110) in ultra-high vacuum. The local contact potential difference measured by KPFM indicates an interfacial dipole due to electron transfer from the Cu-TCPP to the TiO{sub 2}. The experimental results are verified by state-of-the-art first principles calculations. We note that the improvement of the AFM resolution, achieved in this work, is crucial for such accurate calculations. Therefore, high resolution AFM at room temperature is promising for significantly promoting the understanding of molecular adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Segregation Energies in Low-Index Open Surfaces of Bimetallic Transition Metal Alloys

We present a database of 24 x 24 segregation energies of single transition metal impurities in low-index surfaces of transition metal hosts, calculated using the localized self-consistent Green’s function (LSGF) method, in combination with the atomic sphere approximation including a multipole correction to the electrostatic potential and energy. The surface energies of {100} facets for fcc and bcc transition metals, and the more stable of the two {1010} facets of hcp transition metals are also calculated and compared with available theoretical results. Insights derived should be useful for determining the nature of active sites in a variety of catalytic reactions employing bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plutonium Hybrid Materials: A Platform to Explore Assembly and Metal–Ligand Bonding

In this work, we report the synthesis of five new hybrid materials containing the [PuCl 6 ] 2- anion and charge balancing, non-covalent interaction donating 4-X-pyridinium (X = H, Cl, Br, I) cations. Single crystals of the title compounds were grown and harvested from acidic, chloride-rich, aqueous media and their structures were determined via X-ray diffraction. Compounds 1-4, (4XPyH) 2 [PuCl 6 ] and 5, (4IPyH) 4 [PuCl 6 ] · 2Cl, exhibit two distinct sheet-like structure types. Structurally relevant non-covalent interactions were tabulated from crystallographic data and verified computationally using electrostatic surface potential maps and the quantum theory of atoms in molecules (QTAIM) approach. The strength of the hydrogen and halogen bonds was quantified using Kohn-Sham density functional theory and a hierarchy of acceptor-donor pairings established. In turn, the PuIV-Cl bonds were studied using the QTAIM and natural localized molecular orbital (NLMO) approaches to delineate the underlying bond mechanism and hybrid atomic orbital contributions therein. Energy decomposition (ED) and natural ED analyses were also explored to probe the bond mechanism and, more broadly, explore the efficacy of these techniques in studying these anionic systems. The results of the PuIV-Cl bond analyses were compared across composition via analogous treatments of previously reported [PuO 2 Cl 4 ] 2- and [PuCl 3 (H 2 O) 5 ] molecular units. In summary, our study indicates that the Pu-Cl bonds are predominately ionic, yet exhibit small varying degrees of covalent character that increase from [PuCl 3 (H 2 O) 5 ], [PuO 2 Cl 4 ] 2- , to [PuCl 6 ] 2- , while the participation of the Pu based s/d and f orbitals concurrently decrease and increase, respectively.

transuranic↗

Theoretical structural and vibrational study of 5-trifluoromethyluracil. A comparison with uracil

In the present work, a comparative study on the structural and vibrational properties of the 5-trifluoromethyluracil (TFMU) derivative with those corresponding to uracil in gas and aqueous solution phases was performed combining the available H{sup 1}-NMR, C{sup 13}-NMR, F{sup 19}-NMR and FTIR spectra with Density Functional Theory (DFT) calculations. Three stable conformers were theoretically determined in both media by using the hybrid B3LYP/6-31G* method. The solvent effects were simulated by means of the self-consistent reaction field (SCRF) method employing the integral equation formalism variant (IEFPCM). Complete assignments of the vibrational spectra in both phases were performed combining the internal coordinates analysis and the DFT calculations with the Scaled Quantum Mechanics Force Field (SQMFF) methodology. The atomic charges, bond orders, solvation energies, dipole moments, molecular electrostatic potentials and force constants parameters were calculated for the three conformers of TFMU in gas phase and aqueous solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic Structure and Mechanical Properties of Solvated Montmorillonite Clay Using Large-Scale DFT Method

Montmorillonite clay (MMT) has been widely used in engineering and environmental applications as a landfill barrier and toxic waste repository due to its unique property as an expandable clay mineral that can absorb water easily. This absorption process rendered MMT to be highly exothermic due to electrostatic interactions among molecules and hydrogen bonds between surface atoms. A detailed study of a large supercell model of structural clay enables us to predict long-term nuclear waste storage. Herein, a large solvent MMT model with 4071 atoms is studied using ab initio density functional theory. The DFT calculation and analysis clarify the important issues, such as bond strength, solvation effect, elasticity, and seismic wave velocities. These results are compared to our previous study on crystalline MMT (dry). The solvated MMT has reduced shear modulus (G), bulk modulus (K), and Young’s modulus (E). We observe that the conduction band (CB) in the density of states (DOS) of solvated MMT model has a single, conspicuous peak at –8.5 eV. Moreover, the atom-resolved partial density of states (PDOS) summarizes the roles played by each atom in the DOS. These findings illuminate numerous potential sophisticated applications of MMT clay.

36 MATERIALS SCIENCE↗

On orbit surfacing of thermal control surfaces

Substrates to be contaminated and contamination source were prepared. Additional information on paint spray method apparatus was obtained. Silver teflon second surface mirror samples and S 13 GLO paint samples were mounted, photographed under the microscope and measured to establish baseline data. Atomic oxygen cleaning and spray painting are being considered. Electrostatic powder and plasma spray coating systems appear to have serious drawbacks.

Racette, G. W.↗

Calculated Half-widths and Line Shifts of Water Vapor Transitions in the 0.7- Micron Region and a Comparison with Published Data

Pressure-broadened half-widths and pressure-induced line shifts for the two most important bands of water vapor in the 0.7-micron region are determined using the complex Robert-Bonamy (CRB) formalism. The calculations are made with nitrogen and oxygen as the perturbing gas from which values for air as the perturbing gas are determined. The intermolecular potential is taken as a sum of electrostatic contributions and Lennard-Jones (6-12) atom-atom, and isotropic induction and dispersion components. The dynamics of the collision process are correct to second order in time. The calculated values are compared with published measurements and agreement is observed for both half-widths and line shifts. The temperature dependence of the half-width, which is necessary for reduction of remotely sensed data, is determined.

Gamache, Robert R.↗

Molecular Simulation of Cesium Adsorption at the Basal Surface of Phyllosilicate Minerals

A better understanding of the thermodynamics of radioactive cesium uptake at the surfaces of phyllosilicate minerals is needed to understand mechanisms of its selective adsorption and help guide the development of practical and inexpensive decontamination techniques. In this work, molecular dynamics simulations were carried out to determine the thermodynamics of adsorption of Cs + at the basal surface of six 2:1 phyllosilicate minerals, namely pyrophyllite, illite, muscovite, phlogopite, celadonite, and margarite. These minerals were selected to isolate the effects of the magnitude of the permanent layer charge (≤ 2), its location (tetrahedral versus octahedral sheet), and the structure of the octahedral sheet (dioctahedral versus trioctahedral). Good agreement was obtained with experiment in terms of the hydration free energy of Cs + and the structure and thermodynamics of Cs + adsorption at the muscovite basal surface, for which published data were available for comparison. With the exception of pyrophyllite, which did not exhibit an inner-sphere free energy minimum, all phyllosilicate minerals showed similar behavior with respect to Cs + adsorption; notably, Cs + adsorption was predominantly inner-sphere whereas outer-sphere adsorption was very weak with the simulations predicting the formation of an extended outer-sphere complex. For a given location of the layer charge, the free energy of adsorption as an inner-sphere complex was found to vary linearly with the magnitude of the layer charge. For a given location and magnitude of the layer charge, adsorption at phlogopite (trioctahedral sheet structure) was much less favorable than at muscovite (dioctahedral sheet structure) due to the electrostatic repulsion between the adsorbed Cs + and the hydrogen atom of the hydroxyl group directly below the six-membered siloxane ring cavity. For a given magnitude of the layer charge and structure of the octahedral sheet, adsorption at celadonite (layer charge located in the octahedral sheet) was favored over muscovite (layer charge located in the tetrahedral sheet) due to the increased distance with surface potassium ions.

(001) surface↗

Self-sensing cantilevers with integrated conductive coaxial tips for high-resolution electrical scanning probe metrology

The lateral resolution of many electrical scanning probe techniques is limited by the spatial extent of the electrostatic potential profiles produced by their probes. Conventional unshielded conductive atomic force microscopy probes produce broad potential profiles. Shielded probes could offer higher resolution and easier data interpretation in the study of nanostructures. Electrical scanning probe techniques require a method of locating structures of interest, often by mapping surface topography. As the samples studied with these techniques are often photosensitive, the typical laser measurement of cantilever deflection can excite the sample, causing undesirable changes electrical properties. In this work, we present the design, fabrication, and characterization of probes that integrate coaxial tips for spatially sharp potential profiles with piezoresistors for self-contained, electrical displacement sensing. With the apex 100 nm above the sample surface, the electrostatic potential profile produced by our coaxial tips is more than 2 times narrower than that of unshielded tips with no long tails. In a scan bandwidth of 1 Hz–10 kHz, our probes have a displacement resolution of 2.9 Å at 293 K and 79 Å at 2 K, where the low-temperature performance is limited by amplifier noise. We show scanning gate microscopy images of a quantum point contact obtained with our probes, highlighting the improvement to lateral resolution resulting from the coaxial tip.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Si clusters are more metallic than bulk Si

Dipole polarizabilities were computed using density functional theory for silicon clusters over a broad range of sizes up to N = 147 atoms. The calculated total effective polarizabilities, which include contributions from permanent dipole moments of the clusters, are in very good agreement with recently measured values. We show that the permanent dipole contributions are most important for clusters in the intermediate size range and that the measured polarizabilities can be used to distinguish between energetically nearly degenerate cluster isomers at these sizes. We decompose the computed total polarizabilities into the so-called dipole and charge transfer contributions, $α^p$ and $α^q$, using a sitespecific analysis. When the per-atom values of these quantities are plotted against $N^{-1/3}$, clear linear trends emerge that can be extrapolated to the large size limit ($N^{-1/3}$ → 0), resulting in a value for $\frac{α}{N}$ of 30.5 bohrs 3 /atom that is significantly larger than the per-atom polarizability of semiconducting bulk Si, 25.04 bohrs 3 /atom. This indicates that Si clusters possess a higher degree of metallicity than bulk Si, a conclusion that is consistent with the strong electrostatic screening of the cluster interiors made evident by the analysis of the calculated atomic polarizabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and electrostatic properties of WS{sub 2} nanostructures

We report the direct growth of atomically thin WS{sub 2} nanoplates and nanofilms on the SiO{sub 2}/Si (300 nm) substrate by vapor phase deposition method without any catalyst. The WS{sub 2} nanostructures were systematically characterized by optical microscopy, scanning electron microscopy, Raman microscopy and atomic force microscopy. We found that growth time and growth temperature play important roles in the morphology of WS{sub 2} nanostructures. Moreover, by using Kelvin probe force microscopy, we found that the WS{sub 2} nanoplates exhibit uniform surface and charge distributions less than 10 mV fluctuations. Our results may apply to the study of other transition metal dichalcogenides by vapor phase deposition method.

36 MATERIALS SCIENCE↗

Molecular Ion Dissociation Processes in a Partially Cooled Electrostatic Trap

An experimental capability being developed at the Oak Ridge National LaboratoryMulti-Charged Ion Research Facility (ORNL MIRF) is described that enables stored cooling andstate characterization of atomic and molecular ions of essentially any mass. Ions selected from avariety of available (hot and cold) sources are injected into a 1.5 meter long electrostatic mirrortrap, in which excited internal states decay by radiative cooling. Ion lifetime studies or directmeasurements of ‘in-trap’ interactions of molecular ions with electrons or atomic targets areaccomplished with either a crossed electron beam or atomic beam (with recoil ion detection)located in the field-free region of the ion-trap, coupled with product velocity imaging. Similarly,extraction of trap-cooled ions can be used ‘out-of-trap’ for near state-specific electron capture(EC) and dissociative charge exchange (DCE) studies employing higher resolution COLTRIMStechniques coupled with fragment imaging.

74 ATOMIC AND MOLECULAR PHYSICS↗

Atomic and molecular effects on spherically convergent ion flow. II. Multiple molecular species

A theoretical model for the effect of molecular interactions on the flow of molecular ions in spherically convergent geometry where the inner grid (cathode) is at a large negative potential and the outer grid (anode) is grounded has been developed. The model assumes a weakly ionized deuterium plasma composed of D{sup +}, D{sub 2}{sup +}, and D{sub 3}{sup +} ions that interact with the dominant background gas (D{sub 2}). The interactions included are charge exchange, ionization, and dissociative processes. The formalism developed includes the bouncing motion of the ions in the electrostatic well and sums over all generations of subsequent ions produced by atomic and molecular processes. This leads to a set of two coupled Volterra integral equations, which are solved numerically. From the solution of the Volterra equations, one can obtain quantities of interest, such as the energy spectra of the ions and fast neutral atoms and molecules, and the fusion reaction rate. To provide an experimental test, the model is applied to inertial electrostatic devices and the calculated neutron production rate is compared to previously reported measurements for one University of Wisconsin inertial electrostatic confinement device [D. C. Donovan et al., Fusion Sci. Technol. 56, 507 (2009)]. The results show general agreement with the experimental results, but significant differences remain to be resolved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗