Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Impact of radiation on electronics and opto-electronics

In this chapter we will present the results of the impact of radiation on electronics and opto-electronics for two of the LHC experiments during Run 1 and Run 2. ATLAS results are presented in Section 6.1; CMS in Section 6.2. In Section 6.3 we will present a comparison between the two experiments, highlighting operational guidelines and proposing solutions to build the electronics and opto-electronics of the future LHC experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

High-brightness electron injectors for high-duty cycle X-ray free electron lasers

The successful development in the last two decades of X-ray free electron lasers (FELs) with their revolutionary brightness performance has been tightly dependent on the parallel development of electron guns and injectors capable of providing the high-brightness electron beams required by FELs lasing at these short wavelengths. The ultimate brightness delivered by a linear accelerator (linac) is already set at its injector and the remaining part of the accelerator can be only designed to preserve the injector performance. The technology to be used for the accelerator part of an X-Ray FEL strongly depends on the duty-cycle at which the FEL operates. Normal-conducting, room-temperature, copper-based radio frequency (RF) technology is typically used for low duty-cycles of up to approximately 10 −3 . For higher duty-cycles and up to continuous wave (CW) operation, the linac must rely on superconductive RF technology because, with the higher duty-cycle, the increasingly higher power dissipated in normal conducting RF structures becomes excessive for the warm technology. The situation changes in the lower energy part of the accelerator, where injector schemes, based on direct current, normal-conducting, and superconducting RF electron guns, are demonstrating the beam quality performance required by high-duty-cycle X-ray FELs. In this paper we start with a description of the requirements for such injectors, followed by an overview of the pursued technologies and schemes, and by a discussion on the main differences in terms of beam dynamics between low and high duty-cycle injectors.

Sannibale, Fernando↗
DOE OSTI2022

Electron Tomography and Machine Learning for Understanding the Highly Ordered Structure of Leafhopper Brochosomes

Insects known as leafhoppers (Hemiptera: Cicadellidae) produce hierarchically structured nanoparticles known as brochosomes that are exuded and applied to the insect cuticle, thereby providing camouflage and anti-wetting properties to aid insect survival. Although the physical properties of brochosomes are thought to depend on the leafhopper species, the structure–function relationships governing brochosome behavior are not fully understood. Brochosomes have complex hierarchical structures and morphological heterogeneity across species, due to which a multimodal characterization approach is required to effectively elucidate their nanoscale structure and properties. In this work, we study the structural and mechanical properties of brochosomes using a combination of atomic force microscopy (AFM), electron microscopy (EM), electron tomography, and machine learning (ML)-based quantification of large and complex scanning electron microscopy (SEM) image data sets. This suite of techniques allows for the characterization of internal and external brochosome structures, and ML-based image analysis methods of large data sets reveal correlations in the structure across several leafhopper species. Our results show that brochosomes are relatively rigid hollow spheres with characteristic dimensions and morphologies that depend on leafhopper species. Nanomechanical mapping AFM is used to determine a characteristic compression modulus for brochosomes on the order of 1–3 GPa, which is consistent with crystalline proteins. Altogether, this work provides an improved understanding of the structural and mechanical properties of leafhopper brochosomes using a new set of ML-based image classification tools that can be broadly applied to nanostructured biological materials.

Chemical structure↗
DOE OSTI2023

Electron Microscopy Studies of Soft Nanomaterials

This review highlights recent efforts on applying electron microscopy (EM) to soft (including biological) nanomaterials. We will show how developments of both the hardware and software of EM have enabled new insights into the formation, assembly, and functioning (e.g., energy conversion and storage, phonon/photon modulation) of these materials by providing shape, size, phase, structural, and chemical information at the nanometer or higher spatial resolution. Specifically, we first discuss standard real-space two-dimensional imaging and analytical techniques which are offered conveniently by microscopes without special holders or advanced beam technology. The discussion is then extended to recent advancements, including visualizing three-dimensional morphology of soft nanomaterials using electron tomography and its variations, identifying local structure and strain by electron diffraction, and recording motions and transformation by in situ EM. On these advancements, we cover state-of-the-art technologies designed for overcoming the technical barriers for EM to characterize soft materials as well as representative application examples. Here, the even more recent integration of machine learning and its impacts on EM are also discussed in detail. With our perspectives of future opportunities offered at the end, we expect this review to inspire and stimulate more efforts in developing and utilizing EM-based characterization methods for soft nanomaterials at the atomic to nanometer length scales in academic research and industrial applications.

Imaging↗
DOE OSTI2021

Precision measurement of electron-electron scattering in GaAs/AlGaAs using transverse magnetic focusing

Electron-electron (e-e) interactions assume a cardinal role in solid-state physics. Quantifying the e-e scattering length is hence critical. In this paper we show that the mesoscopic phenomenon of transverse magnetic focusing (TMF) in two-dimensional electron systems forms a precise and sensitive technique to measure this length scale. Conversely we quantitatively demonstrate that e-e scattering is the predominant effect limiting TMF amplitudes in high-mobility materials. Using high-resolution kinetic simulations, we show that the TMF amplitude at a maximum decays exponentially as a function of the e-e scattering length, which leads to a ready approach to extract this length from the measured TMF amplitudes. The approach is applied to measure the temperature-dependent e-e scattering length in high-mobility GaAs/AlGaAs heterostructures. The simulations further reveal current vortices that accompany the cyclotron orbits - a collective phenomenon counterintuitive to the ballistic transport underlying a TMF setting.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Verwey transition as evolution from electronic nematicity to trimerons via electron-phonon coupling

Understanding the driving mechanisms behind metal-insulator transitions (MITs) is a critical step toward controlling material’s properties. Since the proposal of charge order–induced MIT in magnetite Fe 3 O 4 in 1939 by Verwey, the nature of the charge order and its role in the transition have remained elusive. Recently, a trimeron order was found in the low-temperature structure of Fe 3 O 4 ; however, the expected transition entropy change in forming trimeron is greater than the observed value, which arises a reexamination of the ground state in the high-temperature phase. Here, we use electron diffraction to unveil that a nematic charge order on particular Fe sites emerges in the high-temperature structure of bulk Fe 3 O 4 and that, upon cooling, a competitive intertwining of charge and lattice orders arouses the Verwey transition. Our findings discover an unconventional type of electronic nematicity in correlated materials and offer innovative insights into the transition mechanism in Fe 3 O 4 via the electron-phonon coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Reorganization Energies for Interfacial Proton-Coupled Electron Transfer to a Water Oxidation Catalyst

The reorganization energy (λ) for interfacial electron transfer (ET) and proton-coupled electron transfer (PCET) from a conductive metal oxide (In 2 O 3 :Sn, ITO) to a surface-bound water oxidation catalyst were extracted from kinetic data measured as a function of the thermodynamic driving force. Visible light excitation resulted in rapid excited-state injection (k inj > 10 8 s -1 ) to the ITO, which photo-initiated the two interfacial reactions of interest. The rate constants for both reactions increased with the driving force, −ΔG°, to a saturating limit, k max , with rate constants consistently larger for ET than for PCET. Marcus-Gerischer analysis of the kinetic data provided the reorganization energy for interfacial PCET (0.90 ± 0.02 eV) and ET (0.40 ± 0.02 eV), respectively. The magnitude of k max for PCET was found to decrease with pH, behavior that was absent for ET. Both the decrease in k max and the larger reorganization energy for an unwanted competing PCET reaction from the ITO to the oxidized catalyst showcases a significant kinetic advantage for driving solar water oxidation at high pH. Computational analysis revealed a larger inner-sphere reorganization energy contribution for PCET than for ET arising from a more significant change in the Ru–O bond length for PCET. Extending Marcus-Gerischer theory to PCET by including the excited electron-proton vibronic states and the proton donor-acceptor motion provided an apparent reorganization energy of 1.01 eV. Furthermore, this study demonstrates that the Marcus-Gerischer theory initially developed for ET can be reliably extended to PCET for quantifying and interpreting reorganization energies observed experimentally.

Catalysts Kinetic parameters↗
DOE OSTI2023

General Kinetic Model for pH Dependence of Proton-Coupled Electron Transfer: Application to an Electrochemical Water Oxidation System

The pH dependence of proton-coupled electron transfer (PCET) reactions, which are critical to many chemical and biological processes, is a powerful probe for elucidating their fundamental mechanisms. Herein, a general, multichannel kinetic model is introduced to describe the pH dependence of both homogeneous and electrochemical PCET reactions. According to this model, a weak pH dependence can arise from the competition among multiple sequential and concerted PCET channels involving different forms of the redox species, such as protonated and deprotonated forms, as well as different proton donors and acceptors. The contribution of each channel is influenced by the relative populations of the reactant species, which often depend strongly on pH, leading to complex pH dependence of PCET apparent rate constants. This model is used to explain the origins of the experimentally observed weak pH dependence of the electrochemical PCET apparent rate constant for a ruthenium-based water oxidation catalyst attached to a tin-doped In2O3 (ITO) surface. The weak pH dependence is found to arise from the intrinsic differences in the rate constants of participating channels and the dependence of their relative contributions on pH. This model predicts that the apparent maximum rate constant will become pH-independent at higher pH, which is confirmed by experimental measurements. Our analysis also suggests that the dominant channels are electron transfer at lower pH and sequential PCET via electron transfer followed by fast proton transfer at higher pH. Furthermore, this work highlights the importance of considering multiple competing channels simultaneously for PCET processes.

Catalysts↗
DOE OSTI2023

Discovery and construction of surface kagome electronic states induced by p-d electronic hybridization in Co3Sn2S2

Abstract Kagome-lattice materials possess attractive properties for quantum computing applications, but their synthesis remains challenging. Herein, based on the compelling identification of the two cleavable surfaces of Co 3 Sn 2 S 2 , we show surface kagome electronic states (SKESs) on a Sn-terminated triangular Co 3 Sn 2 S 2 surface. Such SKESs are imprinted by vertical p-d electronic hybridization between the surface Sn (subsurface S) atoms and the buried Co kagome-lattice network in the Co 3 Sn layer under the surface. Owing to the subsequent lateral hybridization of the Sn and S atoms in a corner-sharing manner, the kagome symmetry and topological electronic properties of the Co 3 Sn layer is proximate to the Sn surface. The SKESs and both hybridizations were verified via qPlus non-contact atomic force microscopy (nc-AFM) and density functional theory calculations. The construction of SKESs with tunable properties can be achieved by the atomic substitution of surface Sn (subsurface S) with other group III-V elements (Se or Te), which was demonstrated theoretically. This work exhibits the powerful capacity of nc-AFM in characterizing localized topological states and reveals the strategy for synthesis of large-area transition-metal-based kagome-lattice materials using conventional surface deposition techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Electronic origin of reorganization energy in interfacial electron transfer

Electron transfer (ET) reactions underpin energy conversion and chemical transformations in both biological and a biological systems. The efficiency of any ET process relies on achieving a desired ET rate within an optimal driving force range. Marcus theory provides a microscopic framework for understanding the activation free energy—and therefore the rate—of ET in terms of a key parameter: the reorganization energy. For electrified solid–liquid interfaces, it has long been conventionally understood that only factors in the electrolyte phase are responsible for determining the reorganization energy and that the electronic density of states (DOS) of the electrode only serves to dictate the number of thermally accessible channels for ET. Here we show instead that the electrode DOS plays a central role in governing the reorganization energy, far outweighing its conventionally assumed role. Using atomically layered heterostructures, we tune the DOS of graphene and measure outer-sphere ET kinetics. We find the ensuing variation in ET rate arises from strong modulation in a reorganization energy associated with image potential localization in the electrode. Here we redefine the traditional paradigm of heterogeneous ET kinetics, revealing a deeper role of the electrode electronic structure in interfacial reactivity.

Electrochemistry↗
DOE OSTI2024

Tracking dissociation pathways of nitrobenzene via mega-electron-volt ultrafast electron diffraction

As the simplest nitroaromatic compound, nitrobenzene is an interesting model system to explore the rich photochemistry of nitroaromatic compounds. Previous investigations of nitrobenzene's photochemical dynamics have probed structural and electronic properties. These investigations paint, at times, a convoluted and sometimes contradictory description of the photochemical landscape. Here, we investigate the ultrafast dynamics of nitrobenzene triggered by photoexcitation at 267 nm for the first time using a structural probe with femtosecond time resolution. Our probe complements previous measurements of nitrobenzene's electronic structure evolution and aids in determining the photochemical dynamics with less ambiguity. We employ megaelectronvolt ultrafast electron diffraction to follow nitrobenzene's structural evolution within the first 5 ps after photoexcitation. We observe ground state recovery within 160 ± 60 fs through nonadiabatic dynamics. Based on comparisons of the experimental signal with molecular dynamics simulations, we exclude a significant population of the triplet manifold. Furthermore, we do not observe fragmentation of nitrobenzene within the investigated time window, which indicates that previously observed photofragmentation reactions take place in the vibrationally 'hot' ground state on timescales considerably beyond 5 ps.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Direct matter disassembly via electron beam control: electron-beam-mediated catalytic etching of graphene by nanoparticles

Here, we report electron-beam activated motion of a catalytic nanoparticle along a graphene step edge and associated etching of the edge. The catalytic hydrogenation process was observed to be activated by a combination of elevated temperature and electron beam irradiation. Reduction of beam fluence on the particle was sufficient to stop the process, leading to the ability to switch on and off the etching. Such an approach enables the targeting of individual nanoparticles to induce motion and beam-controlled etching of matter through activated electrocatalytic processes. The applications of electron-beam control as a paradigm for molecular-scale robotics are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Flavor-violating ALPs, electron g − 2 , and the Electron-Ion Collider

We revisit the possibility that light axionlike particles (ALPs) with lepton-flavor-violating couplings could give significant contributions to the electron’s anomalous magnetic moment g e − 2 . Unlike flavor diagonal lepton-ALP couplings, which are exclusively axial, lepton-flavor-violating couplings can have arbitrary chirality. Focusing on the e − τ ALP coupling, we find that the size of the contribution to g e − 2 depends strongly on the chirality of the coupling. A significant part of the parameter space for which such a coupling can explain experimental anomalies in g e − 2 can be probed at the Electron-Ion Collider, which is uniquely sensitive to the chirality of the coupling using the polarization of the electron beam. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Injection of electron beams into two laser wakefields and generation of electron rings

Throughout this work, mutual injection of electron beams into two laser plasma wakefields was observed experimentally when driving laser pulses interfered in plasma at a small crossing angle and were slightly relatively delayed, approximately by one pulse duration. Particle-in-cell simulations revealed that the mutual injection was sensitive to the spatial overlap of the laser pulses, which therefore could be used to control the mutual injection. The dual synchronized, femtosecond electron beams are potentially useful for pump-probe experiments in ultrafast science. In addition, out-of-axis ring-shaped electron beams were detected in both experiments and simulations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Electron emission from particles strongly affects the electron energy distribution in dusty plasmas

The electron energy distribution of a low-temperature dusty plasma has been measured via a Langmuir probe. An unexpected broad peak at energy in the 2–4 V range has been observed. This can be theoretically reproduced for a sufficiently large electron emission rate from the nanoparticles dispersed in the plasma. A careful analysis of the nanoparticle energy balance, using measured values of nanoparticle concentration and plasma density, confirms that particles are sufficiently hot under the conditions of this study to rapidly inject electrons into the plasma via field-assisted thermionic emission. This work suggests that the presence of dust affects the plasma ionization balance more deeply than previously thought.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Controlling hydrocarbon transport and electron beam induced deposition on single layer graphene: Toward atomic scale synthesis in the scanning transmission electron microscope

Abstract Focused electron beam induced deposition (FEBID) is a direct write technique for depositing materials on a support substrate akin to 3D printing with an electron beam (e‐beam). Opportunities exist for merging this existing technique with aberration‐corrected scanning transmission electron microscopy to achieve molecular‐ or atomic‐level spatial precision. Several demonstrations have been performed using graphene as the support substrate. A common challenge that arises during this process is e‐beam‐induced hydrocarbon deposition, suggesting greater control over the sample environment is needed. Various strategies exist for cleaning graphene in situ. One of the most effective methods is to rapidly heat to high temperatures, for example, 600℃ or higher. While this can produce large areas of what appears to be atomically clean graphene, mobile hydrocarbons can still be present on the surfaces. Here, we show that these hydrocarbons are primarily limited to surface migration and demonstrate an effective method for interrupting the flow using e‐beam deposition to form corralled hydrocarbon regions. This strategy is effective for maintaining atomically clean graphene at high temperatures where hydrocarbon mobility can lead to substantial accumulation of unwanted e‐beam deposition.

36 MATERIALS SCIENCE↗