Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effect measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Transverse Kinematic Imbalance in MicroBooNE's New nue CC0pi Measurements

Neutrino-nucleus cross section measurements require accurate modelling of neutrino interactions. Neutrino beams are not monoenergetic, and the energy of each interaction must instead be modelled using nuclear interaction assumptions. This introduces significant systematic uncertainty into cross section measurements. Effects such as Fermi motion, nuclear correlations, and final-state interactions (FSI) smear the underlying quasi-elastic scattering signal, making it difficult to disentangle genuine quasi-elastic kinematics from nuclear effects across the full range of interaction channels (QE, MEC, RES, DIS) probed in these measurements. Transverse Kinematic Imbalance (TKI) variables, such as $\delta p_T$ and $\delta \alpha_T$, probe this same phase space by exploiting the fact that the incoming neutrino has zero transverse momentum ($\vec{p}_T^{\,\nu} = 0$). Any measured transverse imbalance in the final state therefore arises from nuclear effects rather than from uncertainty in the incident neutrino energy, allowing cross section measurements to select a phase space that is rich in quasi-elastic-like events with minimal contamination from FSI and other nuclear effects, independent of energy reconstruction. Recent unfolded MicroBooNE cross section measurements of electron-neutrino charged-current interactions with zero pions and at least one proton ($\nu_e$ CC0$\pi$, 1eNp0$\pi$) show that several leading nuclear interaction generators (including GENIE variants, NuWro, GiBUU, and NEUT) reproduce the differential cross section in electron energy reasonably well, but consistently struggle to describe the differential cross section in the cosine of the leading proton's angle, yielding lower $p$-values across all seven generators tested. This tension points to a more fundamental, kinematics-driven disagreement between data and generators that is not visible in energy-only cross section observables. This is precisely the regime TKI variables are designed to probe. Following previous TKI cross section measurements with muon-neutrino data in MicroBooNE, this poster presents the case for extending the TKI framework to electron-neutrino cross section measurements as a next step to isolate and characterize the source of the observed generator tension in proton kinematics.

Burridge, Jessica [U. Manchester (main)] (ORCID:00↗
DOE OSTI2024

Measurement of the effective leptonic weak mixing angle

Using pp collision data at $\sqrt{s}$ = 13 TeV, recorded by the LHCb experiment between 2016 and 2018 and corresponding to an integrated luminosity of 5.4 fb −1 , the forward-backward asymmetry in the pp → Z/γ* → μ + μ − process is measured. The measurement is carried out in ten intervals of the difference between the muon pseudorapidities, within a fiducial region covering dimuon masses between 66 and 116 GeV, muon pseudorapidities between 2.0 and 4.5 and muon transverse momenta above 20 GeV. These forward-backward asymmetries are compared with predictions, at next-to-leading order in the strong and electroweak couplings. The measured effective leptonic weak mixing angle is ${\sin}^2{\theta}_{\textrm{eff}}^{\ell }=0.23147\pm 0.00044\pm 0.00005\pm 0.00023,$ where the first uncertainty is statistical, the second arises from systematic uncertainties associated with the asymmetry measurement, and the third arises from uncertainties in the fit model used to extract ${\sin}^2{\theta}_{\textrm{eff}}^{\ell }$ from the asymmetry measurement. This result is based on an arithmetic average of results using the CT18, MSHT20, and NNPDF31 parameterisations of the proton internal structure, and is consistent with previous measurements and with predictions from the global electroweak fit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2016

Correlation of Coronal Plasma Properties and Solar Magnetic Field in a Decaying Active Region

We present the analysis of a decaying active region observed by the EUV Imaging Spectrometer on Hinode during 2009 December 7-11. We investigated the temporal evolution of its structure exhibited by plasma at temperatures from 300,000 to 2.8 million degrees, and derived the electron density, differential emission measure, effective electron temperature, and elemental abundance ratios of Si/S and Fe/S (as a measure of the First Ionization Potential (FIP) Effect). We compared these coronal properties to the temporal evolution of the photospheric magnetic field strength obtained from the Solar and Heliospheric Observatory Michelson Doppler Imager magnetograms. We find that, while these coronal properties all decreased with time during this decay phase, the largest change was at plasma above 1.5 million degrees. The photospheric magnetic field strength also decreased with time but mainly for field strengths lower than about 70 Gauss. The effective electron temperature and the FIP bias seem to reach a basal state (at 1.5 x 10(exp 6) K and 1.5, respectively) into the quiet Sun when the mean photospheric magnetic field (excluding all areas <10 G) weakened to below 35 G, while the electron density continued to decrease with the weakening field. These physical properties are all positively correlated with each other and the correlation is the strongest in the high-temperature plasma. Such correlation properties should be considered in the quest for our understanding of how the corona is heated. The variations in the elemental abundance should especially be considered together with the electron temperature and density.

Sun: abundances↗
NASA NTRS1982

The effects of vegetation cover on the radar and radiometric sensitivity to soil moisture

The measured effects of vegetation canopies on radar and radiometric sensitivity to soil moisture are compared to emission and scattering models. The models are found to predict accurately the measured emission and backscattering for various crop canopies at frequencies between 1.4 and 5.0 GHz, especially at theta equal to or less than 30 deg. Vegetation loss factors, L(theta), increase with frequency and are found to be dependent upon canopy type and water content. In addition, the radiometric power absorption coefficient of a mature corn canopy is 1.75 times that calculated for the radar. Comparison of an L-band radiometer with a C-band radar shows the two systems to be complementary in terms of accurate soil moisture sensing over the extreme range of naturally occurring soil moisture conditions.

Ulaby, F. T.↗
DOE OSTI2020

Hall Effect Characterization of α ‐Irradiated p‐Type 4H‐SiC

Most electrical characterization of radiation damage to semiconductors is conducted on full devices or on low‐doped material. However, evaluating the radiation hardness is challenging in less mature semiconductor systems where low‐doped material is unavailable and full devices are difficult to realize. Herein, temperature‐dependent Hall effect measurements are used to demonstrate α particle‐induced radiation effects in p‐type 4H‐SiC with a room temperature hole concentration of . The 4H‐SiC is irradiated by α particles from a 210 Po source over a fluence of –. Modeling the hole concentration as a function of temperature shows that α radiation causes hole compensation through the introduction of hole traps. The radiation also induces a reduction in hole mobility due to an increase in defect‐related scattering centers. At low temperatures and increasingly higher fluences, the conduction mechanism changes from band conduction to another mechanism.

Frye, Clint D.↗
DOE OSTI2021

Optimal Design of Sustainable Ammonia-Based Food–Energy–Water Systems with Nitrogen Management

As the basis for virtually any form of nitrogen fertilizers, ammonia plays a vital role in agriculture; in addition, there has been an increased interest in its use as a carbon-free energy carrier. However, ammonia is also associated with two major environmental concerns: CO 2 emissions from the conventional production process and nitrogen pollution from the excessive use of ammonia-based fertilizers. To mitigate these environmental impacts, we develop an optimization framework for the design of a sustainable ammonia-based agricultural system that synergistically integrates the production of ammonia from renewable resources and effective measures for nitrogen management. The proposed model captures the effect of intermittency by incorporating both design and detailed operational decisions. Here, by applying a multiscale time representation that reduces the problem size and a tailored surrogate model that accurately approximates model nonlinearity, we are able to achieve optimal solutions within reasonable computation times. A computational case study is conducted using real-world data from a local farm in Morris, Minnesota, and the results indicate the trade-off between cost and nitrogen loss. Importantly, we show that practicing effective nitrogen management can significantly reduce the nitrogen loss with only a small increase in net present cost.

10 SYNTHETIC FUELS↗
NASA NTRS2015

Influence of Chair Vibrations on Indoor Sonic Boom Annoyance

One goal of NASA’s Commercial Supersonic Technology Project is to identify candidate noise metrics suitable for regulating quiet sonic boom aircraft. A suitable metric must consider the short duration and pronounced low frequency content of sonic booms. For indoor listeners, rattle and creaking sounds and floor and chair vibrations may also be important. The current study examined the effect of such vibrations on the annoyance of test subjects seated indoors. The study involved two chairs exposed to nearly identical acoustic levels: one placed directly on the floor, and the other isolated from floor vibrations by pneumatic elastomeric mounts. All subjects experienced both chairs, sitting in one chair for the first half of the experiment and the other chair for the remaining half. Each half of the experiment consisted of 80 impulsive noises played at the exterior of the sonic boom simulator. When all annoyance ratings were analyzed together there appeared to be no difference in mean annoyance with isolation condition. When the apparent effect of transfer bias was removed, a subtle but measurable effect of vibration on annoyance was identified.

Rathsam, Jonathan↗
NASA NTRS1998

Low-Speed Flow Studies Using the Pressure Sensitive Paint Technique

Optical pressure measurements have been made on a NACA 0012 airfoil coated with Pressure Sensitive Paint (PSP) at very low flow speeds (less than 50 m/s). Angle of attack was limited to 5 deg. for most measurements. Effects of temperature gradients and mis-registration errors on PSP response have been established and minimized. By reducing measurement error caused by these effects. PSP sensitivity has been enhanced. Acceptable aerodynamic data at flow speeds down to 20 m/s have been obtained and valid pressure paint response was observed down to 10 m/s. Measurement errors (in terms of pressure and pressure coefficient) using PSP with pressure taps as a reference are provided for the range of flow speeds from 50 m/s to 10 m/s.

Brown, O. C.↗
NASA NTRS1976

Prediction and measurement of radiation damage to CMOS devices on board spacecraft

The CMOS Radiation Effects Measurement (CREM) experiment is presently being flown on the Explorer-55. The purpose of the experiment is to evaluate device performance in the actual space radiation environment and to correlate the respective measurements to on-the-ground laboratory irradiation results. The experiment contains an assembly of C-MOS and P-MOS devices shielded in front by flat slabs of aluminum and by a practically infinite shield in the back. Predictions of radiation damage to C-MOS devices are based on standard environment models and computational techniques. A comparison of the shifts in CMOS threshold potentials, that is, those measured in space to those obtained from the on-the-ground simulation experiment with Co-60, indicates that the measured space damage is smaller than predicted by about a factor of 2-3 for thin shields, but agrees well with predictions for thicker shields.

Cliff, R. A.↗
NASA NTRS1976

Prediction and measurement of radiation damage to CMOS devices on board spacecraft

The CMOS Radiation Effects Measurement (CREM) experiment is presently being flown on the Explorer-55, to evaluate device performance in the actual space radiation environment and to correlate the respective measurements to on-the-ground laboratory irradiation results. The experiment contains an assembly of CMOS and P-MOS devices shielded in front over 2 pi steradian by flat slabs of aluminum of 40, 80, 150, and 300 mils (1.02, 2.04, 3.81, and 7.62 mm) thicknesses, and by a practically infinite shield in the back. Initial results from the CREM experiment are reported. Predictions of radiation damage to CMOS devices are based on standard environment models and computational techniques. Measured space damage is smaller than predicted by about a factor of 2-3 for thin shields but agrees well with predictions for thicker shields. It is not clear at this time how the trapped particle environment models or the computational methods should be modified in order to achieve better agreement between experimental results and predicted damage curves.

Cliff, R. A.↗
NASA NTRS1977

Prediction and measurement results of radiation damage to CMOS devices on board spacecraft

Final results from the CMOS Radiation Effects Measurement (CREM) experiment flown on Explorer 55 are presented and discussed, based on about 15 months of observations and measurements. Conclusions are given relating to long-range annealing, effects of operating temperature on semiconductor performance in space, biased and unbiased P-MOS device degradation, unbiased n-channel device performance, changes in device transconductance, and the difference in ionization efficiency between Co-60 gamma rays and 1-Mev Van de Graaff electrons. The performance of devices in a heavily shielded electronic subsystem box within the spacecraft is evaluated and compared. Environment models and computational methods and their impact on device-degradation estimates are being reviewed to determine whether they permit cost-effective design of spacecraft.

Stassinopoulos, E. G.↗
NASA NTRS1993

Faster Hall-Effect Current-Measuring Circuit

Current-measuring circuit operates on Hall-effect-sensing and magnetic-field-nulling principles similar to those described in article, "Nulling Hall-Effect Current-Measuring Circuit" (LEW-15023), but simpler and responds faster. Designed without feedback loop, and analog pulse-width-modulated output indicates measured current. Circuit measures current at frequency higher than bandwidth of its Hall-effect sensor.

Sullender, Craig C.↗
DOE OSTI2021

Probing exchange bias at the surface of a doped ferrimagnetic insulator

With the realization of stress-induced perpendicular magnetic anisotropy, efficient spin-orbit torque switching, and room temperature topological Hall effect, interest in rare earth iron garnets has been revived in recent years for their potential in spintronic applications. In this study, we investigate the magnetic properties of micrometer-thick Bi and Ga substituted thulium iron garnets (BiGa:TmIG) grown by the liquid-phase epitaxy method. Above the magnetization compensation (MC) temperature, anomalous triple hysteresis is observed in BiGa:TmIG/Pt heterostructures by anomalous Hall effect measurements. X-ray magnetic circular dichroism and energy dispersive spectroscopy measurements reveal its origin as an internal exchange bias (EB) effect arising from inhomogeneities localized at the surface of the film. Possibly depending on the difference in thickness and defect realization of the EB layer, two types of magnetization reversal mechanisms, namely, the Stoner-Wohlfarth type and the reversible domain-wall motion type, are observed. Furthermore, our results show that rich meta-magnetic phases exist in garnets close toMC, which can be robustly tuned by chemical composition engineering and conveniently probed by electrical transport measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interpreting Ionic Conductivity for Polymer Electrolyte Fuel Cell Catalyst Layers with Electrochemical Impedance Spectroscopy and Transmission Line Modeling

A cathode catalyst layer containing optimally distributed ionomer is critical to reduce the platinum loading and increase its utilization in polymer electrolyte fuel cells. Here, electrochemical impedance spectroscopy (EIS) was used to measure effective ionic conductivity of pseudo catalyst layers (PCLs) at a relative humidity (RH) range of 50%-120%. These results are compared to previous work using the hydrogen pump (HP) method. EIS effective ionic conductivity results reported here are higher than those from the HP because in the HP set-up ionic pathways must be effectively connected through the PCL to be counted, whereas in the EIS measurement, ionomer segments that are in contact with the membrane but are not effectively connected all the way through the PCL can be detected. Double layer capacitances and effective ionic conductivities of Pt/C catalyst layers with various supports and ionomer to carbon (I/C) ratios were studied. High surface area carbon support resulted in a lower effective ionic conductivity compared to the graphitized carbon support due to worse ionomer dispersion. Effective ionic conductivities of Pt/C layers were compared to that of PCLs. On average, effective ionic conductivities of Pt/C layers were higher than PCLs because of possible carbon agglomeratio n within the PCLs.

25 ENERGY STORAGE↗
DOE OSTI2021

Electronic correlations in the semiconducting half-Heusler compound FeVSb

Electronic correlations are crucial to the low-energy physics of metallic systems with localized d and f states; however, their effect on band insulators and semiconductors is typically negligible. Here, we measure the electronic structure of the half-Heusler compound FeVSb, a band insulator with a filled shell configuration of 18 valence electrons per formula unit ( s 2 p 6 d 10 ). Additionally, angle-resolved photoemission spectroscopy reveals a mass renormalization of m * / m bare = 1.4 , where m * is the measured effective mass and m bare is the mass from density functional theory calculations with no added on-site Coulomb repulsion. Our measurements are in quantitative agreement with dynamical mean-field theory calculations, highlighting the many-body origin of the mass renormalization. This mass renormalization lies in dramatic contrast to other filled shell intermetallics, including the thermoelectric materials CoTiSb and NiTiSn, and has a similar origin to that in FeSi, where Hund's coupling induced fluctuations across the gap can explain a dynamical self-energy and correlations. Our work calls for a rethinking of the role of correlations and Hund's coupling in intermetallic band insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1976

Effective defect density for MOS breakdown - Dependence on oxide thickness

A new procedure for measuring effective defect density takes time-dependent primary dielectric breakdown in MOS devices into account. A time-varying breakdown probability is obtained by applying a constant field stress to a statistically sufficient number of MOS capacitors. Effective defects are assumed distributed randomly in two dimensions, hence indistinguishable. The effective defect density is found to vary with oxide thickness; tentative explanations are ventured to account for this (interfacial tensile stress, ion patching enhanced by local trapping, breakdown in the form of filamentary discharges with release of stored electrostatic energy).

Li, S. P.↗
NASA NTRS2017

Apparatus and Methods for Photoacoustic Measurement of Light Absorption of Particulate and Gaseous Species

In one embodiment, a photoacoustic effect measurement instrument for measuring a species (e.g., a species of PM) in a gas employs a pair of differential acoustic cells including a sample cell that receives sample gas including the species, and a reference cell that receives a filtered version of the sample gas from which the species has been substantially removed. An excitation light source provides an amplitude modulated beam to each of the acoustic cells. An array of multiple microphones is mounted to each of the differential acoustic cells, and measures an acoustic wave generated in the respective acoustic cell by absorption of light by sample gas therein to produce a respective signal. The microphones are isolated from sample gas internal to the acoustic cell by a film. A preamplifier determines a differential signal and a controller calculates concentration of the species based on the differential signal.

Yu, Zhenhong↗
NASA NTRS1996

Quantum Zeno Effect in the Measurement Problem

Critically analyzing the so-called quantum Zeno effect in the measurement problem, we show that observation of this effect does not necessarily mean experimental evidence for the naive notion of wave-function collapse by measurement (the simple projection rule). We also examine what kind of limitation the uncertainty relation and others impose on the observation of the quantum Zeno effect.

Namiki, Mikio↗