Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed and parallel processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Mapping between parallel processor structures and programs

This paper reports some ongoing research efforts at Stanford in allocation of parallel processing resources. Both processor structures and program structures have their own characteristics. Resource allocation binds the two structures during program execution. The mapping problem determines what processor structure and program structure may be combined to obtain maximum speedup. Three approaches to this mapping problem are considered. Two important factors, granularity and interaction delay, are also considered. A new hierarchical approach to structure definition is outlined. Effective and efficient tools are necessary for the study of the mapping problem. A fast turn-around simulation environment developed for investigating partition strategies for distributed computations and a computationally efficient method to predict performance of parallel processor structures are described.

Ngai, Tin-Fook↗

Parallel ALLSPD-3D: Speeding Up Combustor Analysis Via Parallel Processing

The ALLSPD-3D Computational Fluid Dynamics code for reacting flow simulation was run on a set of benchmark test cases to determine its parallel efficiency. These test cases included non-reacting and reacting flow simulations with varying numbers of processors. Also, the tests explored the effects of scaling the simulation with the number of processors in addition to distributing a constant size problem over an increasing number of processors. The test cases were run on a cluster of IBM RS/6000 Model 590 workstations with ethernet and ATM networking plus a shared memory SGI Power Challenge L workstation. The results indicate that the network capabilities significantly influence the parallel efficiency, i.e., a shared memory machine is fastest and ATM networking provides acceptable performance. The limitations of ethernet greatly hamper the rapid calculation of flows using ALLSPD-3D.

Fricker, David M.↗

Fatigue Failure Modes of the Grain Size Transition Zone in a Dual Microstructure Disk

Mechanical property requirements vary with location in nickel-based superalloy disks. In order to maximize the associated mechanical properties, heat treatment methods have been developed for producing tailored grain microstructures. In this study, fatigue failure modes of a grain size transition zone in a dual microstructure disk were evaluated. A specialized heat treatment method was applied to produce varying grain microstructure in the bore to rim portions of a powder metallurgy processed nickel-based superalloy disk. The transition in grain size was concentrated in a zone of the disk web, between the bore and rim. Specimens were extracted parallel and transversely across this transition zone, and multiple fatigue tests were performed at 427 C and 704 C. Grain size distributions were characterized in the specimens, and related to operative failure initiation modes. Mean fatigue life decreased with increasing maximum grain size, going out through the transition zone. The scatter in limited tests of replicates was comparable for failures of uniform gage specimens in all transition zone locations examined.

Gabb, Timothy P.↗

Application of satellite time transfer in autonomous spacecraft clocks

The conceptual design of a spacecraft clock that will provide a standard time scale for experimenters in future spacecraft., and can be sychronized to a time scale without the need for additional calibration and validation is described. The time distribution to the users is handled through onboard computers, without human intervention for extended periods. A group parallel binary code, under consideration for onboard use, is discussed. Each group in the code can easily be truncated. The autonomously operated clock not only achieves simpler procedures and shorter lead times for data processing, but also contributes to spacecraft autonomy for onboard navigation and data packetization. The clock can be used to control the sensor in a spacecraft, compare another time signal such as that from the global positioning system, and, if the cost is not a consideration, can be used on the ground in remote sites for timekeeping and control.

Chi, A. R.↗

An Efficient Variable-Length Data-Compression Scheme

Adaptive variable-length coding scheme for compression of stream of independent and identically distributed source data involves either Huffman code or alternating run-length Huffman (ARH) code, depending on characteristics of data. Enables efficient compression of output of lossless or lossy precompression process, with speed and simplicity greater than those of older coding schemes developed for same purpose. In addition, scheme suitable for parallel implementation on hardware with modular structure, provides for rapid adaptation to changing data source, compatible with block orientation to alleviate memory requirements, ensures efficiency over wide range of entropy, and easily combined with such other communication schemes as those for containment of errors and for packetization.

Cheung, Kar-Ming↗

Comparative magnetospheric/ionospheric studies using Dynamics Explorer spacecraft and ground-based radars

Coincident magnetosphere-ionosphere observations between the Dynamics Explorer 1 and 2 spacecraft with ground-based radar are reviewed. Ionospheric-magnetospheric coupling processes in the plasmasphere, main trough, auroral zone, and polar cap are inferred from the density, temperature, composition, and angular distributions of the low-energy plasma observed from the E-region ionosphere out into the magnetosphere to an altitude of 2.5 Re. From the polar cap to the inner plasmasphere, parallel and perpendicular electric fields, polar wind flow, and equilibrium diffusion appear to be involved in the ionospheric-magnetospheric coupling of the low energy plasma.

Green, J. L.↗

Data storage systems technology for the Space Station era

The paper presents the results of an internal NASA study to determine if economically feasible data storage solutions are likely to be available to support the ground data transport segment of the Space Station mission. An internal NASA effort to prototype a portion of the required ground data processing system is outlined. It is concluded that the requirements for all ground data storage functions can be met with commercial disk and tape drives assuming conservative technology improvements and that, to meet Space Station data rates with commercial technology, the data will have to be distributed over multiple devices operating in parallel and in a sustained maximum throughput mode.

Dalton, John↗

Dynamic Load-Balancing for Distributed Heterogeneous Computing of Parallel CFD Problems

The developed methodology is aimed at improving the efficiency of executing block-structured algorithms on parallel, distributed, heterogeneous computers. The basic approach of these algorithms is to divide the flow domain into many sub- domains called blocks, and solve the governing equations over these blocks. Dynamic load balancing problem is defined as the efficient distribution of the blocks among the available processors over a period of several hours of computations. In environments with computers of different architecture, operating systems, CPU speed, memory size, load, and network speed, balancing the loads and managing the communication between processors becomes crucial. Load balancing software tools for mutually dependent parallel processes have been created to efficiently utilize an advanced computation environment and algorithms. These tools are dynamic in nature because of the chances in the computer environment during execution time. More recently, these tools were extended to a second operating system: NT. In this paper, the problems associated with this application will be discussed. Also, the developed algorithms were combined with the load sharing capability of LSF to efficiently utilize workstation clusters for parallel computing. Finally, results will be presented on running a NASA based code ADPAC to demonstrate the developed tools for dynamic load balancing.

Ecer, A.↗

Comparison of hydrodynamic and semi-kinetic treatments for plasma flow along closed field lines

Hydrodynamic and semi-kinetic treatments of plasma flow along closed geomagnetic field lines are compared. The hydrodynamic treatment is based on a simplified 16-moment set of transport equations as the equations for the heat flows are not solved; the heat flows are treated heuristically. The semi-kinetic treatment is based on a particle code. The comparison deals with the distributions of the plasma density, flow velocity, and parallel and perpendicular temperatures as obtained from the two treatments during the various stages of the flow. In the kinetic treatment, the appropriate boundary condition is the prescription of the velocity distribution functions for the particles entering the flux tubes at the ionospheric boundaries; those particles leaving the system are determined by the processes occurring in the flux tube. The prescribed distributions are half-Maxwellian with temperature T(sub 0) and density n(sub 0). In the hydrodynamic model, the prescribed boundary conditions are on density (n(sub 0)), flow velocity (V(sub 0)) and temperature (T(sub 0). It was found that results from the hydrodynamic treatment critically depend on V(sub 0); for early stages of the flow this treatment yields results in good agreement with those from the kinetic treatment, when V(sub 0) = square root of (kT(sub 0)/2 (pi)m), which is the average velocity of particles moving in a given direction for a Maxwellian distribution. During this early stage, the flows developing form the conjugate ionospheres show some distinct transitions. For the first hour or so, the flows are highly supersonic and penetrate deep into the opposite hemispheres, and both hydrodynamics and kinetic treatments yield almost similar features. It is found that during this period heatflow effects are negligibly small. When a flow penetrates deep into the opposite hemisphere, the kinetic treatment predicts reflection and setting up of counterstreaming. In contrast, the hydrodynamic treatment yields a shock in the flow. The reasons for this difference in the two treatments is discussed, showing that in view of the relatively warm ions, the coupling of ion beams and the consequent shock formation in the offequatorial region are not likely due to the enhancements in the beam temperatures. The counterstreaming in the kinetic treatment and the shock in the hydrodynamic treatment first advance upward to the equator and then downward to the ionospheric boundary from where the flow originated. The transit time for this advancement is found to be about 1 hour for the respective models. After 2 hours or so, both models predict that the flows from the ionospheric boundaries are generally subsonic with respect to the local ion-sound speed. At late stages of the flow, when a substantial fraction of ions entering the flux tube begin to return back in the kinetic treatment, the hydrodynamic treatment with the boundary condition V(sub 0) = square root of (kT(sub 0)/2(pi)m) yields an over-refilling, and the choice of V(sub 0) becomes uncertain.

Singh, Nagendra↗

A programming environment for distributed complex computing. An overview of the Framework for Interdisciplinary Design Optimization (FIDO) project. NASA Langley TOPS exhibit H120b

The Framework for Interdisciplinary Design Optimization (FIDO) is a general programming environment for automating the distribution of complex computing tasks over a networked system of heterogeneous computers. For example, instead of manually passing a complex design problem between its diverse specialty disciplines, the FIDO system provides for automatic interactions between the discipline tasks and facilitates their communications. The FIDO system networks all the computers involved into a distributed heterogeneous computing system, so they have access to centralized data and can work on their parts of the total computation simultaneously in parallel whenever possible. Thus, each computational task can be done by the most appropriate computer. Results can be viewed as they are produced and variables changed manually for steering the process. The software is modular in order to ease migration to new problems: different codes can be substituted for each of the current code modules with little or no effect on the others. The potential for commercial use of FIDO rests in the capability it provides for automatically coordinating diverse computations on a networked system of workstations and computers. For example, FIDO could provide the coordination required for the design of vehicles or electronics or for modeling complex systems.

Townsend, James C.↗

A distributed Clips implementation: dClips

A distributed version of the Clips language, dClips, was implemented on top of two existing generic distributed messaging systems to show that: (1) it is easy to create a coarse-grained parallel programming environment out of an existing language if a high level messaging system is used; and (2) the computing model of a parallel programming environment can be changed easily if we change the underlying messaging system. dClips processes were first connected with a simple master-slave model. A client-server model with intercommunicating agents was later implemented. The concept of service broker is being investigated.

Li, Y. Philip↗

The dynamics and structure of the S0 galaxy NGC 7332

Spectroscopic and photometric observations of the edge-on S0 galaxy NGC 7332 are presented. The spectra show the galaxy to possess a rapidly counter-rotating extended gas disk as detected from both (O III) 5007 A and H alpha emission. Multiple slit orientations at a variety of position angles clearly show the decoupling of the angular momenta between the stellar and gaseous components. The gas is distributed asymmetrically and displays noncircular motions indicating that it has not reached equilibrium. These observations are strong evidence in support of an accretion process having occurred in NGC 7332. Broad R and B band CCD images show the boxy isophotes that NGC 7332 has long been known to possess while offset spectra taken parallel to the major and minor axes display the cylindrical rotation common to galaxies with box-shaped bulges. The bulge of NGC 7332 is well described by an r(exp 1/4)-law on both the major and minor axes while the outer disk is exponential. The B-R color of the disk is uniform; the only indication of a trend to blue colors is a Delta(B-R(sub c))/Delta log r= -0.04 +/- 0.01 gradient seen perpendicular to the bulge and disk. There exists a 10 sec long region of nearly constant surface brightness along the major axis between the bulge and disk components. Not likely due to absorbing material, the relation of this feature to the already complicated structure of the galaxy is considered.

Fisher, David↗

Investigation of Twin Jet Aeroacoustic Properties in the Presence of a Hybrid Wing Body Shield

In preparation for upcoming wind tunnel acoustic experiments of a Hybrid Wing Body (HWB) vehicle with two jet engine simulator units, a series of twin jet aeroacoustic investigations were conducted leading to increased understanding and risk mitigation. A previously existing twin jet nozzle system and a fabricated HWB aft deck fuselage are combined for a 1.9% model scale study of jet nozzle spacing and jet cant angle effects, elevon deflection into the jet plume, and acoustic shielding by the fuselage body. Linear and phased array microphone measurements are made, and data processing includes the use of DAMAS (Deconvolution Approach for the Mapping of Acoustic Sources). Closely-spaced twin jets with a 5 inward cant angle exhibit reduced noise levels compared to their parallel flow counterparts at similar and larger nozzle spacings. A 40 elevon deflection into the twin jet plume, which is required for HWB ground rotation, can significantly increase upstream noise levels (more than 5 dB OASPL) with only minimal increases in the downstream direction. Lastly, DAMAS processing can successfully measure the noise source distribution of multiple shielded jet sources.

Doty, Michael J.↗

Physical Processes for Driving Ionospheric Outflows in Global Simulations

We review and assess the importance of processes thought to drive ionospheric outflows, linking them as appropriate to the solar wind and interplanetary magnetic field, and to the spatial and temporal distribution of their magnetospheric internal responses. These begin with the diffuse effects of photoionization and thermal equilibrium of the ionospheric topside, enhancing Jeans' escape, with ambipolar diffusion and acceleration. Auroral outflows begin with dayside reconnexion and resultant field-aligned currents and driven convection. These produce plasmaspheric plumes, collisional heating and wave-particle interactions, centrifugal acceleration, and auroral acceleration by parallel electric fields, including enhanced ambipolar fields from electron heating by precipitating particles. Observations and simulations show that solar wind energy dissipation into the atmosphere is concentrated by the geomagnetic field into auroral regions with an amplification factor of 10-100, enhancing heavy species plasma and gas escape from gravity, and providing more current carrying capacity. Internal plasmas thus enable electromagnetic driving via coupling to the plasma, neutral gas and by extension, the entire body " We assess the Importance of each of these processes in terms of local escape flux production as well as global outflow, and suggest methods for their implementation within multispecies global simulation codes. We complete 'he survey with an assessment of outstanding obstacles to this objective.

Moore, Thomas Earle↗

Comparative magnetospheric/ionospheric studies using Dynamics Explorer spacecraft and ground-based radars

Coincident observations between the Dynamics Explorer 1 and 2 spacecraft with Chatanika and Arecibo ground-based radar are briefly reviewed. Ionospheric-magnetospheric coupling processes in the plasmasphere, main trough, auroral zone, and polar cap are inferred from the density, temperature, composition, and angular distributions of the low-energy plasma observed from the E-region ionosphere out into the magnetosphere to an altitude of 2.5 earth radii (Re). From the polar cap to the inner plasmasphere, parallel and perpendicular electric fields, polar wind flow, and equilibrium diffusion appear to be involved in the ionospheric-magnetospheric coupling of the low energy plasma.

Green, J. L.↗

Power system state estimation for a spacecraft power system

An application of the maximum likelihood state estimator to a space-based power system is presented. The state estimator uses current and voltage measurements to generate estimates of node voltages for an electrical power distribution system for the Space Shuttle. Preliminary results on the effect of noisy measurements on estimated parameters are reported. The software used in generating these results is part of an overall package being developed at Louisiana Tech University. Intended applications of this package include the analysis of power systems and real-time parallel processing on the Space Shuttle.

Berry, F. C.↗

Low-freqency instabilities and the resulting velocity distributions of pickup ions at comet Halley

The interaction between the solar wind and newborn cometary ions is studied using a new analytical theory as well as one- and two-dimensional hybrid simulations. Using the observed parameters upstream of the comet Halley, a detailed study of wave excitation and the resulting particle distributions is presentd. Linear theory as well as simulations show that a variety of modes such as the fast magnetosonic mode, high frequency whistlers and obliquely propagating Alfven ion cyclotron waves can be excited. However, parallel propagating waves are found to be dominant in the wave spectrum and to control the scattering of the pickup ions. Several features of the observed distributions of pickup protons are explained. In particular, it is shown that the observed asymmetric pitch distribution for the pickup protons is due to the small saturation amplitude of the waves for the given parameters. Water group associated waves can lead to energy diffusion and further pitch angle scattering of protons. This effect is most likely to be important in the vicinity of the bow shock of comet Halley where the density of water group ions becomes comparable to that of protons. It is shown that the observed increase in the radius of the proton velocity shell just outside the bow shock can be due to water group waves. The nearby isotropic proton pitch angle distribution observed by Neugebauer et al. (1989) just outside the bow shock may, however, be related to the presence of a rotational discontinuity which has been identified in the magnetic field data. Just outside the bow shock, simulations show that parallel propagating water group waves can steepen with attached whistler wave packets. The steepening process at parallel propagation is a transient effect, in an important contrast to the case of steepening at oblique angles. The smaller beam densitites at comet Halley appears to be the main reason not only why waves at comet Halley have smaller amplitudes but also why oblique, steepening magnetosonic waves have not been detected at comet Halley, whereas they have been seen at comet Giacobini-Zinner. Halley, whereas they have been seen at comet Giacobini-Zinner.

Karimabadi, H.↗

In Pursuit of the FIP Effect in Late-Type Stellar Coronae

Spectral line data for several coronally active stars, in addition to EUVE Deep Survey light curves, have been analysed under this program. Much difficulty has been encountered in the study that has resulted in fewer stars being analysed than had been hoped. The difficulties stemmed from the analysis of low X-ray spectra taken with the ASCA satellite that produced results that are strongly discrepant with respect to the EUVE results. There is no obvious explanation for this, though it appears that analysis of ASCA data systematically underestimate metal abundance in hot plasmas. Consequently, the final emphasis in our analyses has been on EUVE data. Observed line profiles have being fitted in order to measure their fluxes using IDL software specially developed under this and parallel efforts.The observed line profiles deviate from pure gaussian forms, but we have found the benefits of using additional functional forms in the fitting process to be of only very small value for the lines with highest S/N. The resulting line fluxes have being processed in terms of the coronal EM using new techniques. Resulting EM distribution models are being used to finalize metallicity and abundance estimates for the stars in the program. Special account of the influence of missing lines in the spectral models has been taken.

Drake, Jeremy↗