Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “directivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigation of Remanufacturing Methods Utilizing Mechanically-Generated and Gas-Atomized Feedstock Production for Directed Energy Deposition Processing Through Specific Energy Consumption Modeling

The goal of this work was to assess the energy consumption of a novel remanufacturing method that utilizes mechanically-generated feedstock for directed energy deposition. Gas-atomization is the state-of-the-art production process for directed energy deposition feedstock, and for this work was incorporated into a remanufacturing process path to provide a comparison method. Specific energy consumption models of remanufacturing utilizing both of these proposed process paths were developed and applied to a case study to investigate energy saving opportunities for future manufacturing paradigms. The energy modelling was done in three stages. First, the mechanically-generated feedstock production energy consumption model was generated from experimental observation. Second, the gas-atomized feedstock production energy consumption model was generated from a combination of experimental observation, reported estimates from the manufacturer, and data found in the literature. Lastly, the energy consumption model of directed energy deposition was derived from experimental observation and compares favorably with reported estimates in the literature. With the models, the specific energy consumption in the two process paths were compared and their application was demonstrated by estimating the energy consumption to remanufacture a bracket. The two feedstock production methods had similar specific energy consumptions. The specific energy consumption of the directed energy deposition process was the greatest component in the respective remanufacturing paths by an order of magnitude; increasing deposition rate is the most important factor for lowering the overall specific energy consumption. The analyzed remanufacturing technologies were estimated to consume less energy than replacement when repairing up to approximately 15% of the original part’s mass.

42 ENGINEERING↗
DOE OSTI2023

Direct comparison between experiments and dislocation dynamics simulations of high rate deformation of single crystal copper

A long standing challenge in computational materials science is to establish a quantitative connection between the macroscopic properties of plastic deformation with the microscopic mechanisms of dislocations in crystalline materials. Although the discrete dislocation dynamics (DDD) simulation method has been developed for several decades with the goal of addressing this challenge, a one-to-one comparison between the DDD predictions on single crystal stress–strain curves and experimental measurements under identical conditions has not been possible to date. Such a comparison is an essential step towards establishing a dislocation-physics based theory of plasticity and a multiscale framework of the plastic behaviors of crystalline materials. Here we provide direct comparisons between the stress–strain curves of Cu single crystals under high strain rate loading in the [0 0 1] and [0 1 1] directions obtained from miniaturized desktop Kolsky bar experiments and those from DDD simulations under identical loading conditions. With an appropriate set of parameters, DDD simulations can produce stress–strain curves that are in reasonable agreement with the experimental results. However, the dislocation mobility values needed to achieve this agreement are an order of magnitude lower than expected based on previous measurements and atomistic simulations. We hypothesize that this discrepancy could be caused by drag forces from jogs and point defects produced during the plastic deformation. Cross-slip of screw dislocations is also found to be necessary to capture the experimental stress–strain behavior, especially for the [0 1 1] loading direction. Finally, this work provides an example of how direct comparisons between DDD simulations and experimental measurements can provide new insight into the fundamental mechanisms of plastic deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Wave energy resource characterization employing joint distributions in frequency-direction-time domain

Joint and marginal distributions in the frequency, direction, and time domain are employed to demonstrate their value for wave energy resource characterization when full spectra are available. Insights gained through analysis of these distributions support wave energy converter concept design, operation and maintenance. Spatial trends in the wave energy resource and contributing wave energy systems along the continental shelf of the West Coast of the United States are investigated using the most recent two-dimensional wave spectra measurements at four buoys over an eleven year period (2008 to 2018). Resource hot spots and dominant resolved energy resource bands in the frequency-direction-time domain are delineated. Resource attributes, including frequency and directional spreading, and seasonal variability, are characterized using joint distributions and marginal distributions of wave power spectra. North Pacific westerly swells in the winter season, augmented by Aleutian low-pressure southwesterly swells, are the principal suppliers of the dominant resource and main drivers influencing resource attributes. In conclusion, the modification of these systems southward, especially the North Pacific westerly swells, explains the observed spatial resource trends. The dominant resource wave period shifts two seconds to higher wave periods, thirty degrees in the dominant direction band to a more northward orientation, and forward by one month.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Effective direct steam regeneration of bis-iminoguanidine solid sorbent used for carbon dioxide capture

A cost-effective, energy-efficient sorbent regeneration process for phase-changing guanidines used for CO 2 capture was developed based on direct-steam stripping. This approach enhances the regeneration rate, simplifies the overall CO 2 capture process, and reduces the energy cost compared to conventional conductive thermal regeneration. A direct-steam sorbent regeneration reactor was developed, demonstrating that aqueous bis(iminoguanidines) (BIG) sorbents, e.g., methylglyoxal-bis(iminoguanidine) (MGBIG) and glyoxal-bis(iminoguanidine) (GBIG), could be efficiently regenerated with up to ~ 99 % CO 2 recovery through direct-steam stripping. Using low-temperature steam at 100 °C, a 4.5 times faster regeneration rate for GBIG carbonate sorbent (e.g., 30 min for 10 g) was demonstrated compared to conductive-heating (e.g., 135 min for 10 g) at 130 °C. Additionally, fully regenerated MGBIG converts into an aqueous MGBIG solution when the steam condenses onto the sorbent surface. Condensed steam with the guanidine can be easily recycled as an aqueous solution into the gas–liquid contactor to achieve a continuous-flow CO 2 -capture process. Molecular dynamics simulation was employed to provide a better understanding of the process. Higher heat transfer rates from steam to guanidine carbonate, compared to air heating, were attributed to the vibration resonance of water molecules within MGBIG with that of vapor molecules and the effective transfer of kinetic energy from vapor to solid. Technoeconomic analysis demonstrated that direct-steam stripping significantly decreases the CO 2 capture cost by 50 % compared to traditional conductive heating methods. Further, enhanced mass transfer facilitated by low-temperature steam and subsequent condensation effectively heats up the H 2 O-containing BIG-carbonate crystals, facilitating the desorption of CO 2 from the solid crystals, thereby leading to fast, effective, and energy-efficient sorbent regeneration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Analysis of direct and indirect noise in a next-generation aviation gas turbine combustor

A large-eddy simulation (LES) of a next-generation combustor is performed to examine effects of this combustor concepts on direct and indirect combustion noise characteristics. Direct noise is computed considering the unsteady heat release predictions while entropy fluctuations in the downstream part of the combustor are used to estimate indirect noise through the transfer function of the outlet nozzle. A low-order acoustic reconstruction technique, which utilizes the Green’s function of the configuration, is developed to compute the acoustics inside the combustor. Comparisons to experimental results are reported, showing the reasonable accuracy of the LES and combustion noise computations. The direct noise spectrum peaks at frequencies around 3 kHz because of the fast timescales associated with the chemical reactions inside the combustor. In addition, the indirect noise is dominant at low frequencies, i.e., less than 400 Hz, because of the characteristics of the entropy spectrum at the outlet nozzle. Further, compared to a conventional rich-quench-lean (RQL) combustor configuration, significant differences in the acoustics are observed, and are explained by two specific technological novelties. Firstly, the direct noise spectrum peaks at significantly higher frequencies due to the combustor’s compactness. Secondly, the entropy inhomogeneties downstream of the combustion region are an order of magnitude smaller in amplitude due to the lack of dilution with cold air. This leads to a significant reduction in the indirect noise amplitude at low frequencies, where it is the dominant source of noise. These results suggest opportunities for advanced combustion technologies to achieve substantial reductions in combustion-related noise.

42 ENGINEERING↗
DOE OSTI2022

A deep learning-based direct forecasting of CO 2 plume migration

Accurate and timely forecasts of CO 2 plume evolution in geological reservoirs are crucial for CO 2 migration detection, leakage risk assessment, and operation decision support. Conventional forecasting usually adopts a two-step strategy, first calibrating reservoir model parameters against observations using iterative inverse modeling (or history matching) and then applying the calibrated model for predictions. This method impedes real-time forecasts due to the heavy computational demand in inverse modeling and may suffer from poor prediction accuracy because of the limited observation data. In this work, we propose a deep learning-based latent space mapping framework to forecast CO 2 plume migration directly by avoiding the inverse modeling. We first use the convolutional autoencoder to map the high-dimensional complex plume extents onto low-dimensional latent space. Next, we use neural networks to learn the relationship between the observation variables and the prediction latent variables. And then for given observation data, we infer the prediction values directly. This one-step direct forecasting is computationally efficient which requires a few number of parallelizable reservoir simulations and it can provide accurate predictions with limited observations by learning the observation-prediction relationship in the reduced dimension. Therefore, our proposed method enables an in-time forecast of dynamic CO 2 plume distributions. In this work, we demonstrate the effectiveness and accuracy of our method in predicting the CO 2 plume migration using four metrics such as plume area, centroid movement distance, and plume spreading in the primary and secondary directions. And the spatio-temporal evolution patterns of plume migration under diverse geological complexities are also accurately quantified.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

SANDD: A directional antineutrino detector with segmented 6 Li-doped pulse-shape-sensitive plastic scintillator

We present a characterization of a small (9-liter) and mobile 0.1% 6 Li-doped pulse-shape-sensitive plastic scintillator antineutrino detector called SANDD (Segmented AntiNeutrino Directional Detector), constructed for the purpose of near-field reactor monitoring with sensitivity to antineutrino direction. SANDD comprises three different types of module. A detailed Monte Carlo simulation code was developed to match and validate the performance of each of the three modules. The combined model was then used to produce a prediction of the performance of the entire detector. Analysis cuts were established to isolate antineutrino inverse beta decay events while rejecting large fraction of backgrounds. The neutron and positron detection efficiencies are estimated to be 34.8% and 80.2%, respectively, while the coincidence detection efficiency is estimated to be 71.7%, resulting in inverse beta decay detection efficiency of 20.0% ± 0.2%(stat.) ± 2.1%(syst.). Finally, the predicted directional sensitivity of SANDD produces an uncertainty of 20° in the azimuthal direction per 100 detected antineutrino events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Estimation of intensity, footprint, and capacity of surface urban heat islands using a direction-enhanced adaptive synchronous extraction (DEASE) method

Here, the surface urban heat island (SUHI) effect, assessed through remotely sensed land surface temperature (LST), remains a focal point in urban climate research. Conventional indicators like SUHI intensity (SUHII) and footprint (SUHIF) capture peak values and spatial extent but fail to account for the cumulative thermal load—a critical dimension reflecting the total heat exposure imposed by spatially continuous warming, which directly limits a holistic assessment of ecological and societal impacts of the SUHI effect. Therefore, this study introduces an indicator termed SUHI capacity (SUHIC), designed to quantify the aggregated SUHI effect by integrating the magnitude of the warming signal across all affected areas, thereby enabling a more comprehensive evaluation of urban thermal environments. Furthermore, a direction-enhanced adaptive synchronous extraction (DEASE) method is proposed for the quantification of SUHIC. This method can dynamically identify the optimal background reference area based on the urban-rural LST gradients in various directions within the city, without relying on predefined mathematical models as previously. The results from 102 European cities first confirm that the directional variations in urban-rural LST gradients, and the DEASE method can effectively capture these distinctions for the simultaneous estimation of SUHII, SUHIF, and SUHIC. Secondly, the spatial patterns of absolute SUHIC values show strong associations with those of SUHIF (R2>0.86), while its relative values (normalized by the area of urban) align more closely with SUHII (R2 > 0.64). More importantly, SUHIC can serve as a crucial reference for assessing the urban thermal signal when SUHII and SUHIF diverge. The proposed method and framework contribute to standardizing the quantification of the SUHI effect.

Indicator↗
DOE OSTI2022

Ultra-fast microwave regeneration of CO 2 solid sorbents for energy-efficient direct air capture

Large-scale deployment of direct air capture (DAC) technologies has become critical for mitigating climate change. Towards this end, energy-efficient regeneration of the sorbents used in the process of carbon capture from air is very important to significantly reduce the high operational cost of DAC. Guanidine compounds can be used with environmentally friendly aqueous amino acids (e.g., potassium sarcosinate) for fast and effective CO 2 capture from air, and have a strong potential for low-energy CO 2 release and sorbent regeneration. In this process, the amino acid absorbs the CO 2 from the air, and the guanidine compounds react with the CO 2 -rich amino acid solution and crystallize as an insoluble carbonate salt. Separation and thermal regeneration of the precipitated guanidine carbonate salt leads to an overall low-temperature and low-energy direct air capture process. Effective CO 2 release from the solid guanidine compound can be achieved by mild heating at 120 °C. Here, in this study, to overcome the relatively inefficient traditional conductive heating of the crystalline solid (i.e., Methylglyoxal-bis(iminoguanidine) carbonate, MGBIG carbonate), we evaluated the feasibility of microwave heating of MGBIG carbonate in terms of power requirement, radiation time, and solids mass for efficient CO 2 desorption. The energy consumption needed by a microwave oven and a conventional oven to regenerate the same mass of the sorbent was directly measured to compare the total energy required per unit mass of regenerated sample and provide an understanding of the potential benefits of microwave regeneration. We found that microwave heating effectively regenerates MGBIG carbonate, which may be facilitated by the water molecules that are co-crystallized with carbonate in the guanidine crystals. Microwave heating at 2.54 GHz with 1250 W is up to 17 times faster than conventional conductive heating at 160 °C, resulting in 40 % electrical energy reduction. These results indicate that microwave regeneration may be an energy-efficient method for fast regeneration of solid sorbents used for direct air capture.

42 ENGINEERING↗
DOE OSTI2023

Microextraction–TQ–ICP–MS for the Direct Analysis of U and Pu from Cotton Swipes

Here, the microextraction sampling technique was integrated with triple quadrupole–inductively coupled plasma–mass spectrometry (TQ–ICP–MS) to directly sample and measure the isotopic compositions of uranium (U) and plutonium (Pu) from cotton swipes. Once extracted, the U/Pu were directed into the TQ–ICP–MS instrument for isotopic determination. Carbon dioxide (CO 2 ) and helium (He) gases were delivered to a collision reaction cell within the ICP–MS system for ion separation. The CO 2 reacts with the U + forming UO + which is ultimately separated from the Pu + ions of interest in the third quadrupole. This study demonstrates direct liquid extraction of U/Pu from a solid surface and subsequent measurement by TQ–ICP–MS in <60 s. Flow rates were optimized (0.3 mL min –1 CO 2 and 5 mL min –1 He) in the reaction cell of the ICP–MS system to maximize the Pu signal while minimizing U interferences (i.e., 238 U + tail and 238 UH + ) at m/z 239. Low levels of Pu (~2 pg) were deposited on a cotton swipe along with U at concentrations ranging from 20 to 200 ng. The 240 Pu/ 239 Pu ratio was measured with <7% relative difference from the certified value at all U concentrations. Major and minor U isotope ratios were also measured with <4% relative difference. This highlights that the microextraction–TQ–ICP–MS method can extract a mixed U/Pu sample directly from a cotton swipe and measure both isotopic systems without chemical separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

RNA–Polymer Conjugates via Direct Incorporation of the Chain Transfer Agent and PET–RAFT Polymerization

Covalent conjugation of RNA with synthetic polymers has emerged as a powerful approach for creating bioconjugates with synergistically enhanced properties. However, conventional methods require solid-phase synthesis to preinstall functional groups in RNA, significantly limiting practical applications. Here, we present a novel approach for synthesizing RNA–polymer conjugates via direct incorporation of chain transfer agent (CTA) into RNA through acylation chemistry and reversible addition–fragmentation chain transfer (RAFT) polymerization. A CTA-functionalized acyl imidazole reagent was synthesized to facilitate direct and covalent modification of various RNAs by reacting with their 2′-hydroxyl groups. Subsequent RAFT polymerization using RNA–CTA as a macro-CTA enabled direct grafting-from RNA, yielding RNA conjugates with controlled molecular weight and low dispersity. Notably, this postsynthetic modification strategy was successfully extended to modify biomass RNA, yielding thermoresponsive conjugates and biodegradable hydrogels. Overall, this advance allowed for the direct modification of synthetic and biomass RNAs, significantly enhancing the accessibility of functional RNA–polymer materials.

biomass↗
DOE OSTI2020

Direct Observation of Methylmercury and Auranofin Binding to Selenocysteine in Thioredoxin Reductase

Selenoenzymes, containing a selenocysteine (Sec) residue, fulfill important roles in biology. The mammalian thioredoxin reductase selenoenzymes are key regulators of antioxidant defense and redox signaling and are inhibited by methylmercury species and by the gold-containing drug auranofin. It has been proposed that such inhibition is mediated by metal binding to Sec in the enzyme. However, direct structural observations of these classes of inhibitors binding to selenoenzymes have been few to date. Here we therefore have used extended X-ray absorption fine structure as a direct structural probe to investigate binding to the selenium site in recombinant rat thioredoxin reductase 1 (TrxR1). The results demonstrate for the first time the direct and complete binding of the metal atom of the inhibitors to the selenium atom in TrxR1 for both methylmercury and auranofin, indicating that TrxR1 inhibition indeed can be attributed to such direct metal–selenium binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Low-Temperature Direct Oxidation of Propane to Propylene Oxide Using Supported Subnanometer Cu Clusters

Propylene oxide, a key commodity of the chemical industry for a wide range of consumer products, is synthesized through sequential propane dehydrogenation and epoxidation reactions. However, the lack of a direct catalytic route from propane to propylene oxide reduces efficiency and represents a major challenge for catalysis science. Herein, we report the discovery of a highly active and selective catalyst, made of alumina-supported subnanometer copper clusters, which can directly convert propane to propylene oxide at temperatures as low as 150 °C. Moreover, at higher temperatures, on the same catalysts, the selectivity is switched to propylene. Accompanying theoretical calculations indicate that partially oxidized and/or hydroxylated clusters have low activation energies for both propane dehydrogenation and propylene epoxidation pathways, enabling direct conversion with very high selectivity for propylene oxide. The discovery of a low-temperature catalyst that can convert propane directly to propylene oxide provides an important opportunity for the development of energy-efficient and economic catalysts for this industrially critical process. Similarly, when operating at higher temperatures, these catalysts are posed as potent oxidative dehydrogenation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Strong Electronic and Magnetic Coupling in M 4 (M = Ni, Cu) Clusters via Direct Orbital Interactions between Low-Coordinate Metal Centers

In this report we present an extensive study of tetranuclear transition-metal cluster compounds M 4 (NP t Bu 3 ) 4 and [M 4 (NP t Bu 3 ) 4 ][B(C 6 F 5 ) 4 ] (M = Ni, Cu; t Bu = tert -butyl), which feature low-coordinate metal centers and direct metal-metal orbital overlap. X-ray diffraction, electrochemical, magnetic, spectroscopic, and computational analysis elucidate the nature of the bonding interactions in these clusters and the impact of these interactions on the electronic and magnetic properties. Direct orbital overlap results in strongly coupled, large-spin ground states in the [Ni 4 (NP t Bu 3 ) 4 ] +/0 clusters and fully delocalized, spin-correlated electrons. Correlated electronic structure calculations confirm the presence of ferromagnetic ground states that arise from direct exchange between magnetic orbitals, and, in the case of the neutral cluster, itinerant electron magnetism similar to that in metallic ferromagnets. The cationic nickel cluster also possesses large magnetic anisotropy exemplified by a large, positive axial zero-field splitting parameter of D = +7.95 or +9.2 cm -1 , as determined by magnetometry or electron paramagnetic resonance spectroscopy, respectively. The [Ni 4 (NP t Bu 3 ) 4 ] + cluster is also the first molecule with easy-plane magnetic anisotropy to exhibit zero-field slow magnetic relaxation, and under a small applied field, it exhibits relaxation exclusively through an Orbach mechanism with a spin relaxation barrier of 16 cm -1 . The S = 1 / 2 complex [Cu 4 (NP t Bu 3 ) 4 ] + exhibits slow magnetic relaxation via a Raman process on the millisecond time scale, supporting the presence of slow relaxation via an Orbach process in the nickel analogue. Overall, this work highlights the unique electronic and magnetic properties that can be realized in metal clusters featuring direct metal-metal orbital interactions between low-coordinate metal centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Boundary-directed epitaxy of block copolymers

Directed self-assembly of block copolymers (BCPs) enables nanofabrication at sub-10 nm dimensions, beyond the resolution of conventional lithography. However, directing the position, orientation, and long-range lateral order of BCP domains to produce technologicallyuseful patterns is a challenge. Here, we present a promising approach to direct assembly using spatial boundaries between planar, low-resolution regions on a surface with different composition. Pairs of boundaries are formed at the edges of isolated stripes on a background substrate. Vertical lamellae nucleate at and are pinned by chemical contrast at each stripe/ substrate boundary, align parallel to boundaries, selectively propagate from boundaries into stripe interiors (whereas horizontal lamellae form on the background), and register to wide stripes to multiply the feature density. Ordered BCP line arrays with half-pitch of 6.4 nm are demonstrated on stripes >80 nm wide. Boundary-directed epitaxy provides an attractive path towards assembling, creating, and lithographically defining materials on sub-10 nm scales.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Demonstration of hot-spot fuel gain exceeding unity in direct-drive inertial confinement fusion implosions

Irradiating a small capsule containing deuterium and tritium fuel directly with intense laser light causes it to implode, which creates a plasma hot enough to initiate fusion reactions between the fuel nuclei. Here we report on such laser direct-drive experiments and observe that the fusion reactions produce more energy than the amount of energy in the central so-called hot-spot plasma. This condition is identified as having a hot-spot fuel gain greater than unity. A hot-spot fuel gain of around four was previously accomplished at the National Ignition Facility in indirect-drive inertial confinement fusion experiments where the capsule is irradiated by X-rays. In that case, up to 1.9 MJ of laser energy was used, but in contrast, our experiments on the OMEGA laser system require as little as 28 kJ. As the hot-spot fuel gain is predicted to grow with laser energy and target size, our work establishes the direct-drive approach to inertial fusion as a promising path towards burning and ignited plasmas in the laboratory. Additionally, we report a record (direct-drive) fusion yield of 0.9 kJ on OMEGA, which we achieved with thin-ice deuterium–tritium liner targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Quantifying direct yield benefits of soil carbon increases from cover cropping

Cropland management practices that restore soil organic carbon (SOC) are increasingly presented as climate solutions that also enhance yields. But how often these benefits align at the farm level—the scale of farmers’ decision making—remains uncertain. Here we examined concurrent SOC and yield responses to cover cropping, including their direct connection, with a global meta-analysis. Cover cropping simultaneously increased yields and SOC in 59.7% of 434 paired observations. Increases in SOC directly increased crop yields in soils with initial SOC concentrations below 11.6 g kg-1; for example, a change from 5 g kg -1 to 6 g kg -1 increased yields by +2.4%. These yield benefits of SOC did not decline as nitrogen inputs increased or when legume cover crops were used, suggesting fertility inputs cannot substitute for SOC effects. Regardless of direct effects of SOC increases on yields, integrating legume cover crops into systems with simplified rotations or with nitrogen inputs < 157 kg ha -1 season -1 N led to the largest yield increases (up to +24.3%), with legumes also increasing SOC more than non-legumes (up to +1.5 g kg -1 ). By simultaneously increasing yields and SOC, cover cropping provides an opportunity to benefit both food security and climate, including via direct yield benefits from SOC increases on low carbon soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Improving the performance for direct electrolysis of CO 2 in solid oxide electrolysis cells with a Sr 1.9 Fe 1.5 Mo 0.5 O 6– δ electrode via infiltration of Pr 6 O 11 nanoparticles

Direct CO 2 electrolysis using solid oxide electrolysis cells (CO 2 -SOECs) holds promise to efficiently convert carbon dioxide to carbon monoxide and oxygen. Cathodes with desirable catalytic activity and chemical stability play a critical role in the development of direct CO 2 -SOECs. Although Sr 2 Fe 1.5 Mo 0.5 O 6–δ (SFM) has exhibited promise for direct CO 2 -SOECs due to its redox stability, it suffers from insufficient activity for the CO 2 reduction reaction (CO 2 RR). Here we report interface engineering of nanosized Pr 6 O 11 on the SFM cathode obtained through infiltration to promote the CO 2 RR performance for direct CO 2 -SOECs. The effect of Pr 6 O 11 loading on the performance of the CO 2 RR is systematically investigated. At 800 °C, the current density of the Pr 6 O 11 infiltrated SFM cathode with an optimum Pr 6 O 11 loading of 14.8 wt% reaches 1.61 A cm –2 at 1.5 V, more than double that of the SFM cathode (0.76 A cm –2 ) under the same operating conditions. X-ray photoelectron spectroscopy (XPS) characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis indicate that the adsorption ability of CO 2 on the SFM cathode has been significantly improved by the formation of Pr 6 O 11 . Temperature-programmed desorption (TPD) of CO 2 measurements further manifest that a 14.8 wt% Pr 6 O 11 -SFM cathode has better CO desorption capacity. In addition, polarization resistance of the SFM cathode has significantly decreased with the addition of Pr 6 O 11 . Three-electrode measurement was used to analyze the improved electrode kinetics. Finally, these results demonstrate that the formation of Pr 6 O 11 in the SFM cathode through infiltration is a promising approach for increasing CO 2 RR activity for CO 2 -SOECs.

03 NATURAL GAS↗