Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “directed assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Reduced size fuel cell for portable applications

A flat pack type fuel cell includes a plurality of membrane electrode assemblies. Each membrane electrode assembly is formed of an anode, an electrolyte, and an cathode with appropriate catalysts thereon. The anode is directly into contact with fuel via a wicking element. The fuel reservoir may extend along the same axis as the membrane electrode assemblies, so that fuel can be applied to each of the anodes. Each of the fuel cell elements is interconnected together to provide the voltage outputs in series.

Narayanan, Sekharipuram R.↗
NASA NTRS1973

Expandable space frames

Expandable space frames having essentially infinite periodicity limited only by practical considerations, are described. Each expandable space frame comprises a plurality of hinge joint assemblies having arms that extend outwardly in predetermined symmetrically related directions from a central or vertex point. The outer ends of the arms form one part of a hinge point. The outer expandable space frame also comprises a plurality of struts. The outer ends of the struts from the other part of the hinged joint. The struts interconnect the plurality of hinge point in sychronism, the spaceframes can be expanded or collapsed. Three-dimensional as well as two-dimensional spaceframes of this general nature are described.

Schoen, A. H.↗
NASA NTRS1979

User-oriented end-to-end transport protocols for the real-time distribution of telemetry data from NASA spacecraft

A set of standard telemetry protocols for downlink data flow facilitating the end-to-end transport of instrument data from the spacecraft to the user in real time is proposed. The direct switching of data by autonomous message 'packets' that are assembled by the source instrument on the spacecraft is discussed. The data system consists thus of a format on a message rather than word basis, and such packet telemetry would include standardized protocol headers. Standards are being developed within the NASA End-to-End Data System (NEEDS) program for the source packet and transport frame protocols. The source packet protocol contains identification of both the sequence number of the packet as it is generated by the source and the total length of the packet, while the transport frame protocol includes a sequence count defining the serial number of the frame as it is generated by the spacecraft data system, and a field specifying any 'options' selected in the format of the frame itself.

Hooke, A. J.↗
NASA NTRS1984

Future Direction of Research in Wear and Wear Resistant Materials. Status of Understanding

The adhesion of materials is one of the most popular interactions occuring between mating solid surfaces in contact, and was regarded as a key factor in wear process. However, because the adhesion is not a separation factor but a joining factor for mating materials, it is not easy to show a general plot of the formation process of wear particle through adhesion. A new idea on the mechanism of formation of wear particles in adhesive wear is shown. The wear particles are not separated from their mother surfaces directly as their final form, but minute adhered fragments are assembled and piled up to form a big particle which should be called as a wear particle after it is removed out of the rubbing system. From this proposed mechanism many other phenomena related to wear are interpreted.

Sasada, T.↗
NASA NTRS1983

Buckling and vibration of any prismatic assembly of shear and compression loaded anisotropic plates with an arbitrary supporting structure

The computer program designated 'VIPASA', which accurately treats buckling and vibration in prismatic plate assemblies with a response that varies sinusoidally in the longitudinal direction, has been found to be limited by the production of an in-plane shear loading of component plates that produces skewed mode shapes. These do not conform to desired support conditions. This problem is presently overcome through a coupling of the VIPASA stiffness matrices for different wavelength responses by means of the Lagrangian Multipliers method. The theory extends to supports at arbitrary locations, and even to the support provided by any elastic structure. The generality and capabilities of VIPASA have been retained in the computer program designated 'VICON', which permits constraints and a supporting structure consisting of any number of transverse beam columns.

Anderson, M. S.↗
NASA NTRS1982

Development of the structural technology of a large deployable antenna

The current NASA-sponsored Antenna Technology Development Program of the offset wrap-rib antenna concept is based on a ground test program of 'proof of concept' hardware whose potential on-orbit performance is based on analytical estimates. The ground demonstration hardware represents a partial 55-meter diameter reflector and feed support structure. Testing will include automated deployment, reflector surface quality evaluation and validation of analytical performance models. Test results and hardware fabrication costs will be used to refine the models that will be the basis for the preliminary design of a 100-meter diameter wrap-rib antenna system. Additionally, the design, processes, tooling, fabrication techniques, fixturing and assembly approaches used for the 'proof of concept' hardware are directly applicable to building flight systems up to 100 meters in diameter.

Wada, B. K.↗
NASA NTRS1993

Sequential ranging: How it works

This publication is directed to the users of data from the Sequential Ranging Assembly (SRA), and to others who have a general interest in range measurements. It covers the hardware, the software, and the processes used in acquiring range data; it does not cover analytical aspects such as the theory of modulation, detection, noise spectral density, and other highly technical subjects. In other words, it covers how ranging is done, but not the details of why it works. The publication also includes an appendix that gives a brief discussion of PN ranging, a capability now under development.

Baugh, Harold W.↗
NASA NTRS1994

Clean assembly and integration techniques for the Hubble Space Telescope High Fidelity Mechanical Simulator

A mechanical simulator of the Hubble Space Telescope (HST) Aft Shroud was built to perform verification testing of the Servicing Mission Scientific Instruments (SI's) and to provide a facility for astronaut training. All assembly, integration, and test activities occurred under the guidance of a contamination control plan, and all work was reviewed by a contamination engineer prior to implementation. An integrated approach was followed in which materials selection, manufacturing, assembly, subsystem integration, and end product use were considered and controlled to ensure that the use of the High Fidelity Mechanical Simulator (HFMS) as a verification tool would not contaminate mission critical hardware. Surfaces were cleaned throughout manufacturing, assembly, and integration, and reverification was performed following major activities. Direct surface sampling was the preferred method of verification, but access and material constraints led to the use of indirect methods as well. Although surface geometries and coatings often made contamination verification difficult, final contamination sampling and monitoring demonstrated the ability to maintain a class M5.5 environment with surface levels less than 400B inside the HFMS.

Hughes, David W.↗
NASA NTRS1996

Advanced Manufacturing of Superconducting Magnets

The development of specialized materials, processes, and robotics technology allows for the rapid prototype and manufacture of superconducting and normal magnets which can be used for magnetic suspension applications. Presented are highlights of the Direct Conductor Placement System (DCPS) which enables automatic design and assembly of 3-dimensional coils and conductor patterns using LTS and HTS conductors. The system enables engineers to place conductors in complex patterns with greater efficiency and accuracy, and without the need for hard tooling. It may also allow researchers to create new types of coils and patterns which were never practical before the development of DCPS. The DCPS includes a custom designed eight-axis robot, patented end effector, CoilCAD(trademark) design software, RoboWire(trademark) control software, and automatic inspection.

Senti, Mark W.↗
NASA NTRS2002

The Influence of Environmental State on Lightning and Convective Parameter Distributions

A merged and highly reduced database of TRMM level 1 (precipitation radar, microwave imager, lightning) and NCEP reanalysis (basic state, radiative and surface flux) data has been assembled for three years of the TRMM mission. This allows direct examination of the dependence of convective spectra (as observed through radar reflectivity, microwave brightness temperature and lightning flash rate) on environmental basic states and anomalies. Such analysis may be more physically justified and instructive than traditional geographic and/or seasonal binning. The dependence of convective spectra on several environmental forcing parameters is presented, including surface Bowen ratio (sensible heat to total turbulent flux), net atmospheric radiative flux convergence and net atmospheric enthalpy flux convergence. The latter are basic drivers of net moisture convergence in simple quasi-equilibrium models of tropical atmospheric convection.

Boccippio, D.↗
NASA NTRS2004

Numerical Investigations of High Pressure Acoustic Waves in Resonators

This presentation presents work on numerical investigations of nonlinear acoustic phenomena in resonators that can generate high-pressure waves using acoustic forcing of the flow. Time-accurate simulations of the flow in a closed cone resonator were performed at different oscillation frequencies and amplitudes, and the numerical results for the resonance frequency and fluid pressure increase match the GRC experimental data well. Work on cone resonator assembly simulations has started and will involve calculations of the flow through the resonator assembly with and without acoustic excitation. A new technique for direct calculation of resonance frequency of complex shaped resonators is also being investigated. Script-driven command procedures will also be developed for optimization of the resonator shape for maximum pressure increase.

Athavale, Mahesh↗
NASA NTRS1980

Ku band deployed assembly and gimbal

Requirements for shuttle orbiter missions to locate satellites for servicing and to communicate when out of touch with a direct ground link were established. A Ku Band deployed antenna system providing an integrated radar and communications function was designed to meet these requirements. The unique features of the gimbal assembly are described with emphasis on the following: edge mounted antenna to minimize stowage volume in shuttle and maximize gain; unique two axis housing and shaft arrangement to accommodate two runs of waveguide and 55 electrical conductors without requiring slip rings; maximum use of aluminum in gimbal structure to reduce costs; and lubricant chosen to survive Earth and space environments.

Deal, T. E.↗
NASA NTRS2006

Failure of Harmonic Gears During Verification of a Two-Axis Gimbal for the Mars Reconnaissance Orbiter Spacecraft

The Mars Reconnaissance Orbiter (MRO) spacecraft has three two-axis gimbal assemblies that support and move the High Gain Antenna and two solar array wings. The gimbal assemblies are required to move almost continuously throughout the mission's seven-year lifetime, requiring a large number of output revolutions for each actuator in the gimbal assemblies. The actuator for each of the six axes consists of a two-phase brushless dc motor with a direct drive to the wave generator of a size-32 cup-type harmonic gear. During life testing of an actuator assembly, the harmonic gear teeth failed completely, leaving the size-32 harmonic gear with a maximum output torque capability less than 10% of its design capability. The investigation that followed the failure revealed limitations of the heritage material choices that were made for the harmonic gear components that had passed similar life requirements on several previous programs. Additionally, the methods used to increase the stiffness of a standard harmonic gear component set, while accepted practice for harmonic gears, is limited in its range. The stiffness of harmonic gear assemblies can be increased up to a maximum stiffness point that, if exceeded, compromises the reliability of the gear components for long life applications.

Johnson, Michael R.↗
NASA NTRS2011

Evaluation of Detector-to-Detector and Mirror Side Differences for Terra MODIS Reflective Solar Bands Using Simultaneous MISR Observations

The Moderate Resolution Imaging Spectroradiometer (MODIS) is one of the five Earth-observing instruments on-board the National Aeronautics and Space Administration (NASA) Earth-Observing System(EOS) Terra spacecraft, launched in December 1999. It has 36 spectral bands with wavelengths ranging from 0.41 to 14.4 mm and collects data at three nadir spatial resolutions: 0.25 km for 2 bands with 40 detectors each, 0.5 km for 5 bands with 20 detectors each and 1 km for the remaining 29 bands with 10 detectors each. MODIS bands are located on four separate focal plane assemblies (FPAs) according to their spectral wavelengths and aligned in the cross-track direction. Detectors of each spectral band are aligned in the along-track direction. MODIS makes observations using a two-sided paddle-wheel scan mirror. Its on-board calibrators (OBCs) for the reflective solar bands (RSBs) include a solar diffuser (SD), a solar diffuser stability monitor (SDSM) and a spectral-radiometric calibration assembly (SRCA). Calibration is performed for each band, detector, sub-sample (for sub-kilometer resolution bands) and mirror side. In this study, a ratio approach is applied to MODIS observed Earth scene reflectances to track the detector-to-detector and mirror side differences. Simultaneous observed reflectances from the Multi-angle Imaging Spectroradiometer (MISR), also onboard the Terra spacecraft, are used with MODIS observed reflectances in this ratio approach for four closely matched spectral bands. Results show that the detector-to-detector difference between two adjacent detectors within each spectral band is typically less than 0.2% and, depending on the wavelengths, the maximum difference among all detectors varies from 0.5% to 0.8%. The mirror side differences are found to be very small for all bands except for band 3 at 0.44 mm. This is the band with the shortest wavelength among the selected matching bands, showing a time-dependent increase for the mirror side difference. This study is part of the effort by the MODIS Characterization Support Team (MCST) in order to track the RSB on-orbit performance for MODIS collection 5 data products. To support MCST efforts for future data re-processing, this analysis will be extended to include more spectral bands and temporal coverage.

Wu, Aisheng↗
NASA NTRS1999

Protein machines and self assembly in muscle organization

The remarkable order of striated muscle is the result of a complex series of protein interactions at different levels of organization. Within muscle, the thick filament and its major protein myosin are classical examples of functioning protein machines. Our understanding of the structure and assembly of thick filaments and their organization into the regular arrays of the A-band has recently been enhanced by the application of biochemical, genetic, and structural approaches. Detailed studies of the thick filament backbone have shown that the myosins are organized into a tubular structure. Additional protein machines and specific myosin rod sequences have been identified that play significant roles in thick filament structure, assembly, and organization. These include intrinsic filament components, cross-linking molecules of the M-band and constituents of the membrane-cytoskeleton system. Muscle organization is directed by the multistep actions of protein machines that take advantage of well-established self-assembly relationships. Copyright 1999 John Wiley & Sons, Inc.

NASA Discipline Musculoskeletal↗
NASA NTRS2008

Mars Interoperability 2008-2015: Options for Relay Orbiter Support to Mars Bound Assets

The current relay orbiter infrastructure at Mars, in support of the user assets presently at Mars and those scheduled for the 2008 to 2015 time frame, only have a need to store-and-forward the returned data collected by an asset to Earth as a single non-prioritized data file. In the forward direction, the relay orbiters are only required to relay the forward link data, i.e., command sequences, software and configuration information assembled on the ground, to the Asset. There are currently no requirements for status/control messages or files to be sent in the return direction from an Asset to an application located on the Relay, nor are there requirements in the forward direction to send status/control messages or files originating on a Relay to an Asset. In addition there are currently no networking requirements at Mars where data originally sent by an Asset is to be delivered to another user asset. However, we foresee the day when standard services for 1) on-board file prioritization of user asset data by a Relay, 2) control/status message transfer between assets and a Relay, and 3) networking between assets i.e., Asset to Asset message/file transfer via a Relay will be required. Each of these services will require the Relay to be capable of understanding the data type and routing needs of the user asset data and be capable of processing it for these purposes. This paper will focus on the innovative enhancements required to the existing communications infrastructure at Mars to enable these future services.

File Transfer↗