Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “digital elevation model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Image based SAR product simulation for analysis

SAR product simulation serves to predict SAR image gray values for various flight paths. Input typically consists of a digital elevation model and backscatter curves. A new method is described of product simulation that employs also a real SAR input image for image simulation. This can be denoted as 'image-based simulation'. Different methods to perform this SAR prediction are presented and advantages and disadvantages discussed. Ascending and descending orbit images from NASA's SIR-B experiment were used for verification of the concept: input images from ascending orbits were converted into images from a descending orbit; the results are compared to the available real imagery to verify that the prediction technique produces meaningful image data.

Domik, G.↗

Dependence of image grey values on topography in SIR-B images

This paper focuses on the use of a high resolution digital elevation model (DEM) to aid in rectifying and enhancing synthetic aperture radar images. Using a synthetic backscatter image, the SIR-B images are manually rectified and resampled to remove geometric distortions caused by topography. In a second step, an improved reflectance function of incidence angle is derived from the DEM and the rectified image and this function is used to reduce radiometric effects of topography yielding an albedo image which clearly shows the thematic, as opposed to topographic content of the image. The procedure is tested on four SIR-B images of a scene in Argentina (crossover point) that is imaged under different azimuth and incidence angles. The similarity of the resulting images indicates that the procedure effectively reduces artefacts from the images that are dependent on topography.

Domik, G.↗

Operational use of Landsat data for timber inventory

Landsat TM data, digital elevation model (DEM) data, and field observations were used to generate a timber type/structure and land-cover strata map of the Sequoia National Forest in California, U.S. and to create a classification data set. The spectral classes were identified as 32 information classes of land cover or timber type and structure. DEM data were used for the determination of major timber specie types by topographic regions of natural occurrence. The results suggest that, for inventories over large areas, traditional per-pixel classifiers are not appropriate for TM-resolution data sets over spatially complex regions such as forest lands; either resolution must be degraded, or more context-dependent classifiers, such as the ECHO classifier described by Landgrebe (1979), must be used.

Price, Curtis V.↗

Geocoding and stereo display of tropical forest multisensor datasets

Concern about the future of tropical forests has led to a demand for geocoded multisensor databases that can be used to assess forest structure, deforestation, thermal response, evapotranspiration, and other parameters linked to climate change. In response to studies being conducted at the Braulino Carrillo National Park, Costa Rica, digital satellite and aircraft images recorded by Landsat TM, SPOT HRV, Thermal Infrared Multispectral Scanner, and Calibrated Airborne Multispectral Scanner sensors were placed in register using the Landsat TM image as the reference map. Despite problems caused by relief, multitemporal datasets, and geometric distortions in the aircraft images, registration was accomplished to within + or - 20 m (+ or - 1 data pixel). A digital elevation model constructed from a multisensor Landsat TM/SPOT stereopair proved useful for generating perspective views of the rugged, forested terrain.

Welch, R.↗

Integration of SAR and DEM data: Geometrical considerations

General principles for integrating data from different sources are derived from the experience of registration of SAR images with digital elevation models (DEM) data. The integration consists of establishing geometrical relations between the data sets that allow us to accumulate information from both data sets for any given object point (e.g., elevation, slope, backscatter of ground cover, etc.). Since the geometries of the two data are completely different they cannot be compared on a pixel by pixel basis. The presented approach detects instances of higher level features in both data sets independently and performs the matching at the high level. Besides the efficiency of this general strategy it further allows the integration of additional knowledge sources: world knowledge and sensor characteristics are also useful sources of information. The SAR features layover and shadow can be detected easily in SAR images. An analytical method to find such regions also in a DEM needs in addition the parameters of the flight path of the SAR sensor and the range projection model. The generation of the SAR layover and shadow maps is summarized and new extensions to this method are proposed.

Kropatsch, Walter G.↗

Three-dimensional perspective visualization

It was demonstrated that image processing computer graphic techniques can provide an effective means of physiographic analysis of remotely sensed regions through the use of three-dimensional perspective rendering. THe methods used to simulate and animate three-dimensional surfaces from two-dimensional imagery and digital elevation models are explained. A brief historic look at JPL's efforts in this field and several examples of animations, illustrating the evolution of these techniques from 1985, are shown. JPL's current research in this area is discussed along with examples of technology transfer and potential commercial application. The software is part of the VICAR (Video Image Communication and Retrieval) image processing system which was developed at the Multimission Image Processing Laboratory of JPL.

Hussey, Kevin↗

Revealing topographic lineaments through IHS enhancement of DEM data

Intensity-hue-saturation (IHS) processing of slope (dip), aspect (dip direction), and elevation to reveal subtle topographic lineaments which may not be obvious in the unprocessed data are used to enhance digital elevation model (DEM) data from northwestern Nevada. This IHS method of lineament identification was applied to a mosiac of 12 square degrees using a Cray Y-MP8/864. Square arrays from 3 x 3 to 31 x 31 points were tested as well as several different slope enhancements. When relatively few points are used to fit the plane, lineaments of various lengths are observed and a mechanism for lineament classification is described. An area encompassing the gold deposits of the Carlin trend and including the Rain in the southeast to Midas in the northwest is investigated in greater detail. The orientation and density of lineaments may be determined on the gently sloping pediment surface as well as in the more steeply sloping ranges.

Murdock, Gary↗

Current status and future developments in radar remote sensing

Some of the major initiatives and directions of remote sensing using SAR (Synthetic Aperture Radar) data alone and in conjunction with other sensors for Earth science investigations are outlined. Specific emphasis is on areas key to global monitoring using SAR data from spaceborne platforms: calibration, geophysical processing, and generation of digital elevation models. Calibration as used here encompasses end to end system characterization over the life of a sensor and characterization of data products relative to past and future sensors. Geophysical processing is defined here to include any processing which results in derived geophysical units. An additional data type, topography, which is required to complete the three dimensional view of surface properties and correct for distortions inherent in SAR is discussed. Future challenges in radar remote sensing include development of strategies to extrapolate from regional to global scale models and development of new sensor technology.

Evans, Diane L.↗

Geometric rectification and geocoding of JPL's AIRSAR data over hilly terrain

A post-processing system was developed to georeference and geocode airborne synthetic aperture radar (SAR) data collected by the JPL-Airborne SAR (AIRSAR) System over hilly terrain during the 1990 MAESTRO1 campaign. Georectification relates image coordinates and object coordinates while the geocoding involves resampling. The georectification method uses a hybrid method based upon a number of navigational parameters and minimal two ground-control points which are referenced in both image and map space. The calculation of the intersection of the SAR signal wavefront and a digital elevation model allowed, within certain error bounds, acquisition of the object-to-image and image-to-object relationships.

Degroof, H.↗

Topography of Apollinaris Patera and Ma'adim Vallis

Digital elevation models of the northern part of Ma'adim Vallis (603a41 607m/pix, 639a91 721m/pix), and Apollinaris Patera (603a42 612m/pix, 639a92 717m/pix), covering the area between 180 degrees to 190 degrees long and -2 degrees to -20 degrees lat. were obtained using a method described here. The results for the Ma'adim Vallis area show broad agreement with the United States Geological Survey (USGS) topographic map of the area with a channel depth of 1 to 2 km. A detailed study of the variations in the channel depth along its course and calculations of its discharge rate from channel cross section and slope are currently being undertaken. Results for Apollinaris Patera have been obtained, although the absolute heights relative to the Mars datum are not well constrained. However, the relative heights are sufficient for some analysis. Again, the topographic map is in reasonable agreement with the USGS map of the area, although there are significant differences.

Thornhill, G. D.↗

Current status and future developments in radar remote sensing

Some of the major initiatives and directions of remote sensing using SAR (Synthetic Aperture Radar) data alone and in conjunction with other sensors for earth science investigations are outlined. Specific emphasis is on areas key to global monitoring using SAR data from spaceborne platforms: calibration, geophysical processing, and generation of digital elevation models. Calibration as used here encompasses end-to-end system characterization over the life of a sensor and characterization of data products relative to past and future sensors. Geophysical processing is defined here to include any processing which results in derived geophysical units. An additional data type, topography, which is required to complete the three-dimensional view of surface properties and correct for distortions inherent in SAR is discussed. Future challenges in radar remote sensing include development of strategies to extrapolate from regional to global scale models and development of new sensor technology.

Evans, Diane L.↗

Soil moisture variability within remote sensing pixels

The effects of topography and the level of soil moisture on the variability of soil moisture within remote sensing pixels were assessed during the First ISLSCP Field Experiment (FIFE) during 1987 and 1989. Soil moisture data from flat, sloped, and valley-shaped pixels were obtained over a wide range of moisture conditions. Relative elevation data were obtained for each study area to create digital elevation models with which to quantify topographic variability. Within-pixel soil moisture variability was shown to increase with increased topographic heterogeneity. The flat pixel had significantly lower standard deviations and fewer outlier points than the slope and valley pixels. Most pixel means had a positive skewness, indicating that most pixels will have areas of markedly higher than average soil moisture.

Charpentier, Michael A.↗

Integration of diverse remote sensing data sets for geologic mapping and resource exploration

The use of high-quality multispectral images in the visible, near-infrared, shortwave infrared, thermal infrared, and microwave regions of the spectrum for producing thematic maps showing details of the surface geology is reported. The airborne data sets used in the study include the Airborne Visible/Infrared Imaging Spectrometer, the Thermal Infrared Multispectral Scanner, and the airborne SAR. Ancillary data include a digital elevation model, National High Altitude Photography, Landsat Multispectral Scanner data, Landsat Thematic Mapper data, laboratory and field spectral measurements, and traditional geologic mapping. The integrated, multispectral images are shown to provide new geologic information that can be used in mineral deposit models to provide exploration targets.

Kruse, Fred A.↗

Radar interferometry studies of the earth's topography

Digital elevation models (DEMs) which have been acquired using the TOPSAR interferometric radar sensor are directly applicable to geological and geophysical studies. Attention is presently given to three illustrative examples of the use of DEMs: the correction of remote-sensing observations for local slope and topographic effects, topographic expressions of erosion and uplift in alluvial fans, and volcanology. The greatest advantages of TOPSAR over conventional photogrammetry include rapidity of data collection, high spatial and vertical resolution, and the ability to obtain contiguous data independent of cloud cover.

Evans, Diane L.↗

Topographic mapping using radar interferometry - Processing techniques

In the summer of 1991 the NASA DC-8 airborne synthetic aperture radar (SAR) system acquired data with the radar configured in a C-band across-track interferometer mode. The data were processed to generate rectified topographic maps. A new processing scheme was developed featuring motion compensation, absolute phase retrieval, and three-dimensional 1ocation. The new processor has been tested using data which were acquired with extreme aircraft motion so that performance could be evaluated under adverse conditions. The topographic maps generated by the radar were compared to Digital Elevation Models (DEM's) derived using conventional optical stereo techniques. In one region we measured rms elevation deviations which were less than the specified DEM accuracy, and in the region covered by the more accurate DEM we found errors varying from 2.2 m rms in relatively flat terrain up to 5.0 m in mountainous areas. The rms difference between radar and DEM elevations over the 6.5 km by 22 km area covered by the more accurate DEM was 3.6 m.

Madsen, Soren N.↗

Radiometric correction of SAR images of varying terrain heights

The advantages and disadvantages of three different approaches to solving the problem of the radiometric correction of synthetic aperture radar (SAR) images of varying terrain heights are presented. The first approach involves registration of a digital elevation model (DEM) of the terrain to the image, determination of the local elevation and incidence angles, and appropriate radiometric correction. The second approach uses a DEM generated from interferometric SAR data to derive the elevation and incidence angle maps. In the third approach, a monopulse technique is employed to determine the elevation angle only. The relative errors in radiometric correction between these approaches are assessed. Calibration errors are estimated using corner reflectors deployed within some of the scenes imaged by the Jet Propulsion Laboratory airborne SAR (JPL AIRSAR).

Freeman, A.↗

Topographic mapping from ERS-1 and SEASAT radar interferometry

A radar interferometric technique for topographic mapping of surfaces yields a high resolution, globally consistent approach to generation of digital elevation models. The technique is illustrated with maps generated from SEASAT and European Space Agency Remote Sensing Satellite (ERS-1) data. A SEASAT interferometric image of a forested area which includes some unvegetated lava flows is analyzed. An analysis of errors expected from application of the technique to maps generated from ERS-1 data is presented. An orbital scenario for a global mapping mission is outlined.

Zebker, Howard A.↗

Topographic slope from the SAR interferometric phase gradient

A new algorithm for the direct calculation of topographic slope maps from synthetic aperture radar (SAR) interferograms is presented. The algorithm derives slope maps without first requiring the creation of a digital elevational model (DEM) from the interferogram, thus obviating the need for high SNR in the interferogram and altitude calibration points for the scene. SAR data useful for interferometry has been collected by the Active Microwave Imager on board the ERS-1 satellite, when it was in a short period repeat orbit. Two passes of the radar sensor form a cross-track interferometric baseline. For a point target at some position (x,y,h), the interferometric phase difference phi is proportional to the difference in path lengths for the two sensor positions to the scatterer. Given the phase difference as measured in the complex interferogram and an accurate baseline geometry, the position of the scatterer, most significantly the height h, can be determined through triangulation. The interferometric phase measurement however is known only modulo 2-pi, and hence it is necessary to determine the correct multiple of 2-pi to add to the phase at each point to obtain an estimate of the actual phase with respect to an absolute datum. This phase unwrapping process is required for creating DEM's, and is difficult or impossible for regions of low SNR or SAR image layover. The new algorithm described here derives slope maps without requiring phase unwrapping.

Werner, Charles L.↗