Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dielectric properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Evaluation of high temperature capacitor dielectrics

Experiments were carried out to evaluate four candidate materials for high temperature capacitor dielectric applications. The materials investigated were polybenzimidazole polymer and three aramid papers: Voltex 450, Nomex 410, and Nomex M 418, an aramid paper containing 50 percent mica. The samples were heat treated for six hours at 60 C and the direct current and 60 Hz alternating current breakdown voltages of both dry and impregnated samples were obtained in a temperature range of 20 to 250 C. The samples were also characterized in terms of their dielectric constant, dielectric loss, and conductivity over this temperature range with an electrical stress of 60 Hz, 50 V/mil present. Additional measurements are underway to determine the volume resistivity, thermal shrinkage, and weight loss of the materials. Preliminary data indicate that the heat treatment of the films slightly improves the dielectric properties with no influence on their breakdown behavior. Impregnation of the samples leads to significant increases in both alternating and direct current breakdown strength. The results are discussed and conclusions made concerning their suitability as high temperature capacitor dielectrics.

Hammoud, Ahmad N.↗
NASA NTRS1992

An investigation of the relationship between tree water potential and dielectric constant

An experiment that has been performed to verify the relationship between the dielectric constant of several tree species and their respective water potentials is described. The water potential, xylem flow and dielectric properties of five tree species were continuously monitored while simultaneously manipulating canopy transpiration and water status. An analysis of the data recorded during these manipulations is presented. Results of this analysis demonstrate a clear coincidence of change in dielectric constant and water status. The implication of this relationship for the utilization of remotely sensed data to study canopy water relations is explored. Preliminary backscatter modeling results demonstrate that the changes in dielectric constant that occur as a result of changes in water status are significant enough to be observable with microwave radar.

Mcdonald, Kyle C.↗
NASA NTRS1997

Surface Plasmon Resonance Evaluation of Colloidal Metal Aerogel Filters

Surface plasmon resonance imaging has in the past been applied to the characterization of thin films. In this study we apply the surface plasmon technique not to determine macroscopic spatial variations but rather to determine average microscopic information. Specifically, we deduce the dielectric properties of the surrounding gel matrix and information concerning the dynamics of the gelation process from the visible absorption characteristics of colloidal metal nanoparticles contained in aerogel pores. We have fabricated aerogels containing gold and silver nanoparticles. Because the dielectric constant of the metal particles is linked to that of the host matrix at the surface plasmon resonance, any change 'in the dielectric constant of the material surrounding the metal nanoparticles results in a shift in the surface plasmon wavelength. During gelation the surface plasmon resonance shifts to the red as the average or effective dielectric constant of the matrix increases. Conversely, formation of an aerogel or xerogel through supercritical extraction or evaporation of the solvent produces a blue shift in the resonance indicating a decrease in the dielectric constant of the matrix. From the magnitude of this shift we deduce the average fraction of air and of silica in contact with the metal particles. The surface area of metal available for catalytic gas reaction may thus be determined.

Smith, David D.↗
NASA NTRSDate not supplied

Fabrication of Extruded Polyphenylsulfone – Boron Nitride Composite Tapes

Polyphenylsulfone (PPSU) is a high-temperature, chemically resistant thermoplastic with high impact resistance that is often used in interior aircraft cabin components, medical devices, and membranes. The aforementioned properties have led to interest investigating PPSU’s compatibility with hexagonal boron nitride (hBN) platelets as a thermally conductive, electrical composite insulator for high power-density electric machines. Preliminary trials extruding PPSU-hBN composite tapes showed promising dielectric properties and higher thermal conductivity as a function of hBN concentration compared to their neat analog. On the other hand, only few studies have reported on the extrusion process and resulting thermo-mechanical properties for PPSU and its composites made with chopped fiber reinforcement or fillers, none of which containing boron nitride filler. Prospects may exist for this type of material to be incorporated into extrusion-based additive manufacturing techniques to print other composites bearing unique properties useful for aerospace. Loading levels with up to approximately 23 wt% were achieved using micro-size BN platelets without observing any significant affects to PPSU’s glass-transition temperature. This work includes a description of the rheological properties of PPSU, the extrusion parameters for mixing and compounding the PPSU-hBN composite tapes, and the thermal and thermo-mechanical properties of PPSU-hBN composites.

polyphenylsulfone↗
NASA NTRSDate not supplied

Fabrication of Extruded Polyphenylsulfone – Boron Nitride Composite Tapes

Polyphenylsulfone (PPSU) is a high-temperature, chemically resistant thermoplastic with high impact resistance that is often used in interior aircraft cabin components, medical devices, and membranes. The aforementioned properties have led to interest investigating PPSU’s compatibility with hexagonal boron nitride (hBN) platelets as a thermally conductive, electrical composite insulator for high power-density electric machines. Preliminary trials extruding PPSU-hBN composite tapes showed promising dielectric properties and higher thermal conductivity as a function of hBN concentration compared to their neat analog. On the other hand, only few studies have reported on the extrusion process and resulting thermo-mechanical properties for PPSU and its composites made with chopped fiber reinforcement or fillers, none of which contained boron nitride filler. Prospects may exist for this type of material to be incorporated into extrusion-based additive manufacturing techniques to print other composites bearing unique properties useful for aerospace. Loading levels with up to approximately 23 wt% were achieved using micro-size BN platelets without observing any significant affects to PPSU’s glass-transition temperature. This work includes a description of the rheological properties of PPSU, the extrusion parameters for mixing and compounding the PPSU-hBN composite tapes, and the thermal and thermo-mechanical properties of PPSU-hBN composites.

Tiffany Williams↗
NASA NTRS2007

High-Temperature Properties of Piezoelectric Langatate Single Crystals

Langasite type crystals belong to non-polar point group of 32 and do not show any phase transformations up to the melting temperature. Langatate (La3Ga(5.5)Ta(0.5)O14) demonstrates piezoelectric activity better than quartz and possesses attractive properties for high temperature sensors, resonators and filter applications. High-quality and colorless langatate crystals were grown by the Czochralski technique. The electromechanical and electrical properties of langatate crystals in different crystallographic directions were characterized at elevated temperature. The piezoelectric coefficient along x-axis was 7 pC/N as measured by a Berlincourt meter for a plate geometry with an aspect ratio of 10:1. The dielectric constant did not exhibit any significant temperature dependence (K33 approx. 21 at 30 C and K33 approx. 23 at 600 C). Loss tangent at 100 kHz remained <0.003 up to 300 C and <0.65 at 600 C. The dielectric properties along the y-axis were similar and its temperature dependence was analogous to the x-axis. Electromechanically, the inactive z-axis exhibited no resonance with K33 approx. 84 at room temperature, decreasing down to approx. 49 at 600 C. Resistivity of these crystals along x-axis decreased from approx. 6x10(exp 11) omega-cm at room temperature, to approx. 1.6x10(exp 6) omega-cm at 600 C.

Sehirlioglu, Alp↗
DOE OSTI2021

Signal Origin of Electrochemical Strain Microscopy and Link to Local Chemical Distribution in Solid State Electrolytes

Electrochemical strain microscopy (ESM) is a distinguished method to characterize Li-ion mobility in energy materials with extremely high spatial resolution. The exact origin of the cantilever deflection when the technique is applied on solid state electrolytes (SSEs) is currently discussed in the literature. Under-standing local properties and influences on ion mobility in SSEs is of utmost importance to improve such materials for next generation batteries. Here, the exact signal formation process of ESM when applied on sodium super ionic conductor (NASICON)-type SSE containing Na- and Li-ions is investigated. Changes in the dielectric properties, which are linked to the local chemical composition, are found to be responsible for the observed contrast in the deflection of the cantilever instead of a physical volume change as a result of Vegard´s Law. The cantilever response is strongly reduced in areas of high sodium content which is attributed to a reduction of the tip-sample capacitance in comparison to areas with high lithium content. This is the first time a direct link between electrostatic forces in contact mode and local chemical information is demonstrated on SSEs. Furthermore, the results open up new possibilities in information gain since dielectric proper-ties are sensitive to subtle changes in local chemical composition.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Plasma-Induced Tailoring of Graphene Oxide Surfaces for Electrochemical Applications: Functionalization and Etching

This study investigates the use of radio frequency air plasma as an eco-friendly method to rapidly and reversibly tailor the surface properties of graphene oxide (GO) films. We observed a transition from hydrophilic (contact angle ∼55°) to superhydrophilic (<10°) with short plasma exposure, attributed to a synergistic combination of surface modification and etching. Spectroscopic analyses (FTIR, XPS) revealed early stage formation of carbonyl groups and reduction of hydroxyls, while longer treatments induced atomic-level etching (AFM) and structural changes (XRD). This surface engineering enhanced the dielectric properties of GO films but led to reduced aqueous stability. The elucidated interplay between plasma-induced functionalization and etching provides valuable insights for the controlled modification of GO surfaces for various applications, including advanced dielectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2012

Dielectric Performance of High Purity HTCC Alumina at High Temperatures - A Comparison Study with Other Polycrystalline Alumina

A very high purity (99.99+) high temperature co-fired ceramic (HTCC) alumina has recently become commercially available. The raw material of this HTCC alumina is very different from conventional HTCC alumina, and more importantly there is no glass additive in this co-fired material. Previously, selected HTCC and LTCC (low temperature co-fired ceramic) alumina materials were evaluated at high temperatures as dielectric and compared to a regularly sintered 96 polycrystalline alumina (96 Al2O3), where 96 alumina was used as the benchmark. A prototype packaging system based on regular 96 alumina with Au thick-film metallization successfully facilitated long term testing of high temperature silicon carbide (SiC) electronic devices for over 10,000 hours at 500C. In order to evaluate this new HTCC alumina for possible high temperature packaging applications, the dielectric properties of this HTCC alumina substrate were measured and compared with those of 96 alumina and a LTCC alumina from room temperature to 550C at frequencies of 120 Hz, 1 KHz, 10 KHz, 100 KHz, and 1 MHz. A parallel-plate capacitive device with dielectric of the HTCC alumina and precious metal electrodes were used for measurements of the dielectric constant and dielectric loss of the co-fired alumina material in the temperature and frequency ranges. The capacitance and AC parallel conductance of the capacitive device were directly measured by an AC impedance meter, and the dielectric constant and parallel AC conductivity of the dielectric were calculated from the capacitance and conductance measurement results. The temperature and frequency dependent dielectric constant, AC conductivity, and dissipation factor of the HTCC alumina substrate are presented and compared to those of 96 alumina. Other technical advantages of this new co-fired material for possible high packaging applications are also discussed.

High temperature↗
DOE OSTI2023

A Brief Review of Sylgard 184

This paper will explore applications and functionality of the Dow material Sylgard 184. Pure Sylgard 184 is a “Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec” material that has good dielectric properties. According to the Technical Data Sheet, Sylgard 184 has a base viscosity of 511 cP, mixed viscosity of 3500 cP, and a work time of 1.5 hours. The cured mate rial has a Shore A hardness of 43, a tensile strength of 980 PSI, and a dielectric strength of 500 volts/mil.

36 MATERIALS SCIENCE↗
NASA NTRS1984

A reexamination of soil textural effects on microwave emission and backscattering

Microwave frequency measurements of moist soil dielectric properties are noted to challenge the validity of percent-of-field-capacity as a moisture indicator that is independent of soil texture in terms of microwave sensitivity. In arriving at this view, gravimetric, volumetric, and percent-of-field-capacity were tested for their ability to reduce dielectric behavior divergence between soil textures at 1.4 and 5.0 GHz. The most congruent dielectric behavior between soil textures is found to occur when soil moisture is expressed on a volumetric basis that is proportional to the number of water dipoles/unit volume. An inadequate characterization of soil bulk density in the field, combined with the dependency of bulk density on water retention at field capacity, offers the most plausible explanation for the earlier conclusions.

Dobson, M. C.↗
NASA NTRS2014

Dielectric Performance of a High Purity HTCC Alumina at High Temperatures - a Comparison Study with Other Polycrystalline Alumina

A very high purity (99.99+%) high temperature co-fired ceramic (HTCC) alumina has recently become commercially available. The raw material of this HTCC alumina is very different from conventional HTCC alumina, and more importantly there is no glass additive in this alumina material for co-firing processing. Previously, selected HTCC and LTCC (low temperature co-fired ceramic) alumina materials were evaluated at high temperatures as dielectric and compared to a regularly sintered 96% polycrystalline alumina (96% Al2O3), where 96% alumina was used as the benchmark. A prototype packaging system based on regular 96% alumina with Au thickfilm metallization successfully facilitated long term testing of high temperature silicon carbide (SiC) electronic devices for over 10,000 hours at 500 C. In order to evaluate this new high purity HTCC alumina for possible high temperature packaging applications, the dielectric properties of this HTCC alumina substrate were measured and compared with those of 96% alumina and a previously tested LTCC alumina from room temperature to 550 C at frequencies of 120 Hz, 1 KHz, 10 KHz, 100 KHz, and 1 MHz. A parallel-plate capacitive device with dielectric of the HTCC alumina and precious metal electrodes were used for measurements of the dielectric constant and dielectric loss of the co-fired alumina material in the temperature and frequency ranges. The capacitance and AC parallel conductance of the capacitive device were directly measured by an AC impedance meter, and the dielectric constant and parallel AC conductivity of the dielectric were calculated from the capacitance and conductance measurement results. The temperature and frequency dependent dielectric constant, AC conductivity, and dissipation factor of the HTCC alumina substrate are presented and compared to those of 96% alumina and a selected LTCC alumina. Other technical advantages of this new co-fired material for possible high packaging applications are also discussed.

Electronic packaging↗
DOE OSTI2024

High-Density Capacitive Energy Storage in Low-Dielectric-Constant Polymer PMMA/2D Mica Nanofillers Heterostructure Composite

The ubiquitous, rising demand for energy storage devices with ultra-high storage capacity and efficiency has drawn tremendous research interest in developing energy storage devices. Dielectric polymers are one of the most suitable materials used to fabricate electrostatic capacitive energy storage devices with thin-film geometry with high power density. In this work, we studied the dielectric properties, electric polarization, and energy density of PMMA/2D Mica nanocomposite capacitors where stratified 2D nanofillers are interfaced between the multiple layers of PMMA thin films using two heterostructure designs of the capacitors, PMMA/2D Mica/PMMA (PMP) and PMMA/2D Mica/PMMA/2D Mica/PMMA (PMPMP). The incorporation of a 2D Mica nanofiller in the low-dielectric-constant PMMA leads to an enhancement in the dielectric constant, with ∆ε ~ 15% and 53% for PMP and PMPMP heterostructures at room temperature. Additionally, a significant improvement in discharged energy density was measured for the PMPMP capacitor (Ud ~ 38 J/cm3 at 825 MV/m) compared to the pristine PMMA (Ud ~ 9.5 J/cm3 at 522 MV/m) and PMP capacitors (Ud ~ 19 J/cm3 at 740 MV/m). This excellent capacitive and energy storage performance of the PMMA/2D Mica heterostructure nanocomposite may inform the fabrication of thin-film, high-density energy storage capacitor devices for potential applications in various platforms.

Biochemistry & Molecular Biology↗
NASA NTRS1973

Surface electrical properties experiment

The surface electrical properties (SEP) experiment was used to explore the subsurface material of the Apollo 17 landing site by means of electromagnetic radiation. The experiment was designed to detect electrical layering, discrete scattering bodies, and the possible presence of water. From the analysis of the data, it was expected that values of the electrical properties (dielectric constant and loss tangent) of lunar material in situ would be obtained. The basic principle of the SEP experiment is interferometry. This principle involves only the interference of two or more waves to produce an interference pattern. The inversion of the interference pattern in terms of the spatial distribution of the electrical properties is the basic aim of the experiment (fig. 15-1). The experiment is most easily understood in terms of a single dipole antenna for radiating electromagnetic energy and a loop receiver for measuring the magnitudes of the fields.

Simmons, G.↗
DOE OSTI2021

Point defect induced incommensurate dipole moments in the K Ca 2 Nb 3 O 10 Dion-Jacobson layered perovskite

Local structural distortions due to isolated atomic defects and defect complexes strongly affect the macroscopic properties of oxide ceramics. While the characterization of local defect structures is more common in simple AB O 3 perovskites, unambiguous determination of the same in layered perovskites is more difficult due to their complex crystal structures. In this study, we combined x-ray pair distribution function and density functional theory calculations to characterize the structure of cation-oxygen divacancy pairs in a Dion-Jacobson (D-J) layered perovskite. Our results indicate that local incommensurate dipole moments with polarization density in the range of ~ 0.1–17μC/cm 2 are created due to divacancy-induced structural distortions in the D-J phase K Ca 2 Nb 3 O 10 . This is comparable with defect dipole moments observed in well-known perovskite ferroelectrics. The current results imply that controlling the atomic defects can potentially lead to significant control of dielectric properties in D-J layered perovskites.

3-dimensional systems↗
NASA NTRS1985

Effects of soil tillage on the microwave emission of soils

In order to understand the interactions of soil properties and microwave emission better, a series of field experiments were conducted in 1984. Small plots were measured with a truck-mounted passive microwave radiometer operating at 1.4 GHz. These data were collected concurrent with ground observations of soil moisture and bulk density. Treatment effects studied included different soil moisture contents and bulk densities. Evaluations of the data have shown that commonly used models of the dielectric properties of wet soils do not explain the observations obtained in these experiments. This conclusion was based on the fact that the roughness parameters determined through optimization were significantly larger than those observed in similar investigations. These discrepancies are most likely due to the soil structure. Commonly used models assume a homogeneous three phase mixture of soil solids, air and water. Under tilled conditions the soil is actually a two phase mixture of aggregates and voids. Appropriate dielectric models for this tilled condition were evaluated and found to explain the observations. These results indicate that previous conclusions concerning the effects of surface roughness in tilled fields may be incorrect, and they may explain some of the inconsistencies encountered in roughness modeling.

Jackson, T. J.↗
DOE OSTI2023

Rapid Cryogenic Electrical Characterization of Materials and Devices Using Gifford-McMahon Cryocoolers

Thin-film heterostructures are necessary building blocks for superconducting and phononic quantum computing devices. Many new generations of quantum hardware demand extensive materials research to optimize performances at cryogenic temperatures (below 10 K). Here, we demonstrate compact cryogenic measurement systems capable of reaching sub-10K temperatures in less than three hours with the ability to measure AC/DC resistance and dielectric properties of thin-film materials. Our platform utilizes Gifford-McMahon (GM) cryocoolers as effective tools for providing high throughput cooling-warming cycles. We successfully used the GM-based measurement systems to measure 1) the superconducting transition temperature for Nb thin films (T c ~7.8 K), and 2) the temperature dependence of the dielectric constant in SiO 2 thin films down to 10 K. The fast electrical characterization feedback will be critical in developing robust materials and components for cryogenic computing devices.

36 MATERIALS SCIENCE↗