Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cross-correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Spanwise measurements of vertical components of atmospheric turbulence

Correlation and spectrum magnitude estimates are computed for vertical gust velocity measurements at the nose and wing tips of a NASA B-57B aircraft for six level flight, low speed and low altitude runs and are compared with those of the von Karman atmospheric turbulence model extended for spanwise relationships. The distance between the wing tips was 62.6 ft. Airspeeds ranged from about 330 to 400 ft/sec, heights above the ground ranged from near ground level to about 5250 ft. and gust velocity standard deviations ranged from 4.10 to 8.86 ft/sec. Integral scale lengths, determined by matching measured autocorrelation estimates with those of the model, ranged from 410 to 2050 ft. Digital signals derived from piezoelectric sensors provided continuous pressure and airspeed measurements. Some directional acceleration sensitivity of the sensors was eliminated by sensor orientation, and their performance was spectrally verified for the higher frequencies with supplemental onboard piezoresistive sensors. The model appeared to satisfactorily predict the trends of the measured cross-correlations and cross-spectrum magnitudes, particularly between the nose and wing tips. However, the measured magnitude estimates of the cross-spectra between the wing tips exceeded the predicted levels at the higher frequencies. Causes for the additional power across the wing tips were investigated. Vertical gust velocity components evaluated along and lateral to the flight path implied that the frozen-turbulence-field assumption is a suitable approximation.

Sleeper, Robert K.↗

Progress in high temperature speckle-shift strain measurement system

A fast, easy to use speckle tracking system is under development for the speckle-shift strain measurement technique. Preliminary correlation tests on wire specimens show strong correlations of well-developed speckle patterns. Stable cross-correlations were obtained from a tungsten filament at 2480 C. An analysis of the optical system determines the minimum required sampling frequency of the speckle pattern to be 2.55 pixels per speckle.

Lant, Christian T.↗

Analysis of Thematic Mapper data for studying the suspended matter distribution in the coastal area of the German Bight (North Sea)

Thematic Mapper data were analyzed with respect to its capability for mapping the complex structure and dynamics of suspended matter distribution in the coastal area of the German Bight (North Sea). Three independent pieces of information were found by factor analysis of all seven TM channels: suspended matter concentration, atmospheric scattering, and sea surface temperature. For the required atmospheric correction, the signal-to-noise ratios of Channels 5 and 7 have to be improved by averaging over 25 x 25 pixels, which also makes it possible to monitor the aerosol optical depth and aerosol type over cloud-free water surfaces. Near-surface suspended matter concentrations may be detected with an accuracy of factor less than 2 by using an algorithm derived from radiative transfer model calculation. The patchiness of suspended matter and its relation to underwater topography was analyzed with autocorrelation and cross-correlation.

Doerffer, R.↗

Constraints on large-scale clustering from the autocorrelation properties of the X-ray background

Expectations for the angular correlation function of intensity fluctuations of the extragalacitc 2-10 keV X-ray background are discussed in relation to the two-point spatial correlation functions, xi(r), of X-ray sources. A simple analytic formula for the amplitude of intensity correlations, Gamma(theta), holding in the low-redshift, small-separation approximation, is derived. The HEAO 1 A-2 upper limits on Gamma(theta) have been exploited to derive constraints on the local xi(r) functions of rich clusters of galaxies, of AGNs, and on the AGN-cluster cross-correlation, as well as on evolution of the correlation functions with cosmic time. X-ray data are found to be compatible with the Bahcall and Soneira estimates of xi(cluster-cluster) as well as with the results of recent studies of quasar clustering.

De Zotti, G.↗

Coherent wave-zonal mean flow interactions in the troposphere

A comprehensive analysis of wave-zonal mean flow variations in the troposphere is carried out using results of observations on the spatial structure and temporal evolution of synoptic time scale variations of the tropospheric zonal mean flow. Seven years of daily operational analysis are examined along with data from the NCAR GCM. Coherent wave-zonal mean flow interactions were revealed via cross-correlation analyses, including fluctuations in zonal mean temperature, three-dimensional winds, and quadratic wave quantities. It was found that tropical zonal wind tendency fluctuations are coherent with those anticipated from quasi-geostrophic wave driving, while tropical temperature tendencies are incoherent with analyzed zonal mean vertical velocities.

Randel, William J.↗

The kinematics and morphology of NGC 520

New long-slit optical spectroscopy and optical and NIR images of NGC 520 are presented. Velocity-dispersion and radial-velocity profiles are obtained from the spectra with the Fourier quotient and cross-correlation techniques. At the NW optical emission peak, a sharp rise in the velocity dispersions implies a concentration of mass. The NW optical peak is also apparent as a peak in the K-band image, whose NIR colors are consistent with the presence of a typical bulge steller population. These data suggest that the NW peak may be the bulge of one of two galaxies in the system. A larger bulge is clearly evident in the K-band image in the middle of an optical dust lane. The optical colors and H-alpha emission imply that both bulges and the disk of the NW galaxy have experienced recent star formation. The radial-velocity profile in the central 10 arcsec at the larger bulge is consistent with a counterrotating core, in agreement with the CO radial-velocity profile (Sanders et al., 1988). This core could be explained as an accreted gas-rich irregular galaxy which is forming a counterrotating stellar disk.

Standord, S. A.↗

Holographic matched filter for full-field in-line signal processing of optical-fiber sensor outputs

A holographic matched filter is used to measure the changes in the output of a dual-mode fiber undergoing axial strain. The hologram is formed by interfering collimated light from a single-mode reference fiber and an unstrained dual-mode sensor fiber on a small piece of holographic material. When the hologram is illuminated by the strained sensor fiber, the cross-correlation field comparing the dual-mode output and its previous state, as recorded in the hologram, is collected, focused into a pick-up fiber, and sent to a photodiode. This arrangement allows for a compact, in-line method for full-field processing of the strain-induced changes in phase and amplitude in the sensor fiber. Other uses of such fiber-based correlators are suggested.

Indebetouw, Guy↗

Infrared thermal imaging of atmospheric turbulence

A technique for analyzing infrared atmospheric images to obtain cross-wind measurement is presented. The technique is based on Taylor's frozen turbulence hypothesis and uses cross-correlation of successive images to obtain a measure of the cross-wind velocity in a localized focal region. The technique is appealing because it can possibly be combined with other IR forward look capabilities and may provide information about turbulence intensity. The current research effort, its theoretical basis, and its applicability to windshear detection are described.

Watt, David↗

Laser transit anemometer measurements on a slender cone in the Langley unitary plan wind tunnel

A laser transit anemometer (LTA) system was used to probe the boundary layer on a slender (5 degree half angle) cone model in the Langley unitary plan wind tunnel. The anemometer system utilized a pair of laser beams with a diameter of 40 micrometers spaced 1230 micrometers apart to measure the transit times of ensembles of seeding particles using a cross-correlation technique. From these measurements, boundary layer profiles around the model were constructed and compared with CFD calculations. The measured boundary layer profiles representing the boundary layer velocity normalized to the edge velocity as a function of height above the model surface were collected with the model at zero angle of attack for four different flow conditions, and were collected in a vertical plane that bisected the model's longitudinal center line at a location 635 mm from the tip of the forebody cone. The results indicate an excellent ability of the LTA system to make velocity measurements deep into the boundary layer. However, because of disturbances in the flow field caused by onboard seeding, premature transition occurred implying that upstream seeding is mandatory if model flow field integrity is to be maintained. A description and results of the flow field surveys are presented.

Humphreys, William M., Jr.↗

The use and misuse of statistics in space physics

This paper presents several statistical techniques most commonly used in space physics, including Fourier analysis, linear correlation, auto- and cross-correlation, power spectral density and superimposed epoch analysis, and presents tests to assess the significance of the results. New techniques such as bootstrapping and jackknifing are presented. When no test of significance is in common usage, a plausible test is suggested.

Reiff, Patricia H.↗

Measurement of surface microtopography using helicopter-mounted stereo film cameras and two stereo matching techniques

A common problem in acquiring ground-truth data for use in microwave interaction modeling is the capture of surface roughness data that are both sampled at distances comparable to a fraction of the wavelength and extensive enough to represent the surface statistics in at least one resolution cell of the microwave remote sensor used. A technique has been developed for acquiring the necessary photogrammetric data using twin 70-mm film cameras mounted on a helicopter boom. The apparatus is described, and the accuracy with which ground surface roughness can be characterized using this device is estimated. Both standard and cross-correlation methods were used for data reduction. Stereogrammetry is compared with a completely automated image-matching technique. Dense disparity images were generated from the helicopter stereo pairs. Using interior orientation parameters supplied by the camera manufacturers, and assuming that exterior orientation parameters remain constant between control target and test field photography, an extremely dense DEM (digital elevation model) for a test field has been derived. Results are compared, and accuracy estimates are presented.

Wall, S. D.↗

Doppler centroid estimation ambiguity for synthetic aperture radars

A technique for estimation of the Doppler centroid of an SAR in the presence of large uncertainty in antenna boresight pointing is described. Also investigated is the image degradation resulting from data processing that uses an ambiguous centroid. Two approaches for resolving ambiguities in Doppler centroid estimation (DCE) are presented: the range cross-correlation technique and the multiple-PRF (pulse repetition frequency) technique. Because other design factors control the PRF selection for SAR, a generalized algorithm is derived for PRFs not containing a common divisor. An example using the SIR-C parameters illustrates that this algorithm is capable of resolving the C-band DCE ambiguities for antenna pointing uncertainties of about 2-3 deg.

Chang, C. Y.↗

Structure and kinematics of the broad-line regions in active galaxies from IUE variability data

IUE archival data are used here to investigate the structure nad kinematics of the broad-line regions (BLRs) in nine AGN. It is found that the centroid of the line-continuum cross-correlation functions (CCFs) can be determined with reasonable reliability. The errors in BLR size estimates from CCFs for irregularly sampled light curves are fairly well understood. BLRs are found to have small luminosity-weighted radii, and lines of high ionization tend to be emitted closer to the central source than lines of low ionization, especially for low-luminosity objects. The motion of the gas is gravity-dominated with both pure inflow and pure outflow of high-velocity gas being excluded at a high confidence level for certain geometries.

Koratkar, Anuradha P.↗

Three-dimensional random vibration testing definition and simulation

An approach is presented for the definition of 3D random vibration test requirements for multiaxial shaker systems. In particular, it is shown that, by utilizing coherence functions for cross-correlation effects, test requirements can be defined in a simple way and provide a more realistic environmental simulation. The method is applicable to the simulation of all field environments and can be similarly employed to develop laboratory test requirements based on field data. Example problems are presented to demonstrate the approach.

Chang, Kurng Y.↗

Total-sky and clear-sky variability of outgoing longwave radiation and shortwave radiation and its relation to cloud fluctuation statistics

Correlation statistics are used to investigate some of the characteristic temporal and spatial scales of the day-to-day changes in cloudiness which tend to dominate the variance of outgoing LW radiation and SW radiation fields. The temporal decorrelation time of the radiation field as measured by the lag time required for the autocorrelation of a region to fall to 0.4 is about 12 hours in the midlatitude storm track. Decorrelation time approaches one to two days when the averaging area of the region is increased significantly. Decorrelation times are also longer in the equatorial and tropical regions. The short decorrelation times are a manifestation of the creation, breakup, and movement of cloud systems. Cross-correlation analysis of the radiation field in the midlatitude storm track region and the subtropical dry zone shows advection speeds that range from about 25 m/sec in the storm tracks to about 8 m/sec in the subtropical dry zone.

Bess, T. D.↗

Near Noise Field of a Jet-Engine Exhaust

Aircraft structures located in the near noise field of a jet engine are subjected to extremely high fluctuating pressures that may cause structural fatigue. Studies of such structures have been limited by lack of knowledge of the loadings involved. The acoustic near field produced by the exhaust of a stationary turbojet engine having a high pressure ratio was measured for a single operating condition without burning. The maximum overall sound pressure without afterburning was found to be about 42 pounds per square foot along the jet boundary in the region immediately downstream of the jet-nozzle exit. With afterburning maximum sound pressure was increased by 50 percent. The sound pressures without afterburning were obtained on a constant percentage band width basis in the frequency range from 350 to 700 cps. Cross-correlation measurements with microphones were made for a range of jet velocities at locations along the jet and at a distance from the jet. In general, little change in the correlation curves was found as a function of jet velocity or frequency-band width.

Howes, Walton L↗

An experimental investigation of wing tip turbulence with applications to aerosound

Wind tunnel tests were performed to measure the turbulence characteristics of flow in the wing tip region of a blunt tipped NACA 0012 airfoil at angles of attack of 16, 12 and 6 deg and flow speeds of 75, 55, and 35 m/s. Reynolds numbers based on the chord length ranged from 1.8 x 10(exp6) to 3.8 x 10(exp 6). Hot wire measurements were made at an angle of attack of 12 deg and U(infinity) = 55 ms. These indicate fluctuation velocities on the order of 0.13 U(infinity) in the tip region. Surface pressure spectra are presented for alpha = 12 deg and 16 deg; surface-pressure cross-correlations are presented for alpha = 16 deg. These suggest the presence of a well organized turbulence structure with a peak Strouhal number 0.8 to 1.1 based on the wing thickness. High frequency turbulence of lesser intensity was measured at positions near the primary tip vortex on the upper wing surface. A separation region with a spectral peak of St approximately equal to 0.4 was recorded at alpha = 16 deg for the transducer located on the low pressure side of the wing nearest the trailing edge. Surface-surface cross correlations display a double, echo like structure. Near-far field correlations indicate that the well ordered tip turbulence and the separation region on the upper surface both radiate significant levels of far field sound. The use of cross correlation techniques in the wind tunnel has permitted treatment of radiated sound levels which are 25 and more dB below tunnel background levels.

Mcinerny, S. A.↗

Sound Pressures and Correlations of Noise on the Fuselage of a Jet Aircraft in Flight

Tests were conducted at altitudes of 10,000, 20,000, and 30,000 feet at speeds of Mach 0.4, 0.6, and O.8. It was found that the sound pressure levels on the aft fuselage of a jet aircraft in flight can be estimated using an equation involving the true airspeed and the free air density. The cross-correlation coefficient over a spacing of 2.5 feet was generalized with Strouhal number. The spectrum of the noise in flight is comparatively flat up to 10,000 cycles per second.

Shattuck, Russell D.↗