Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Silicon solar cell process development, fabrication and analysis

A program plan, baseline process, measurement program and quality control plan were generated. Cutting operations were completed on the silicon sheet material. The first fabrication run of polycrystalline silicon into solar cells by baseline process was completed. Average conversion efficiency for solar cells fabricated by the baseline process from sheet and measured at air mass zero was 10.4%, compared with the control cells, fabricated from single crystal CZ silicon, whose average conversion efficiency was 12.2%.

Source record↗

Efficient and stable perovskite solar cells based on blade-coated CH 3 NH 3 PbI 3 thin films fabricated using “green” solvents under ambient conditions

Metal halide perovskites are considered the most promising candidates for solar cells of the decade due to their exceptional optical and electronic properties. The power conversion efficiency of metal halide perovskites, when incorporated as the active layer of solar cells, has become comparable to that observed for conventional silicon solar cells. However, the stability, scaleup, green solvent usage, and fabrication in ambient conditions of metal halide perovskites need to be solved for commercial applications. Here, in this work, we report the fabrication of blade-coated methylammonium lead iodide (MAPbI 3 ) perovskite thin films using methylamine and acetonitrile as “green” solvents under ambient conditions. Our perovskite films are initially prepared from low purity PbI2 (99%) and are blade-coated in dry air at relative humidity (RH) levels above 30%. A significant advantage of fabricating our perovskite thin films via blade-coating protocols is that there is a minimal amount of precursors (5 μL) used compared to spin-coating methods (50μL–60μL) for a 4 cm 2 substrate. With the addition of a small amount of an organic halide salt, namely, phenethylammonium chloride, the film crystallinity is improved and non-radiative recombination is suppressed, resulting in power conversion efficiencies over 20%. In addition, the device maintains more than 95% of its initial efficiency after 500 h under continuous light illumination of 1-sun at open circuit conditions, 50 °C and 60% RH. The above method leads a path towards the commercial fabrication of perovskite solar cells.

14 SOLAR ENERGY↗

Silicon Carbide Radioisotope Batteries

The substantial radiation resistance and large bandgap of SiC semiconductor materials makes them an attractive candidate for application in a high efficiency, long life radioisotope battery. To evaluate their potential in this application, simulated batteries were constructed using SiC diodes and the alpha particle emitter Americium Am-241 or the beta particle emitter Promethium Pm-147. The Am-241 based battery showed high initial power output and an initial conversion efficiency of approximately 16%, but the power output decayed 52% in 500 hours due to radiation damage. In contrast the Pm-147 based battery showed a similar power output level and an initial conversion efficiency of approximately 0.6%, but no degradation was observed in 500 hours. However, the Pm-147 battery required approximately 1000 times the particle fluence as the Am-242 battery to achieve a similar power output. The advantages and disadvantages of each type of battery and suggestions for future improvements will be discussed.

Rybicki, George C.↗

Development of advanced Si and GaAs solar cells for interplanetary missions

The deep space and planetary exploration project have been acquiring more and more importance and some of them are now well established both in ESA and NASA programs. This paper presents the possibility to utilize both silicon and gallium arsenide solar cells as spacecraft primary power source for missions far from the Sun, in order to overcome the drawbacks related to the utilisation of radioisotope thermoelectric generators - such as cost, safety and social acceptance. The development of solar cells for low illumination intensity and low temperature (LILT) applications is carried out in Europe by ASE (Germany) and CISE (Italy) in the frame of an ESA programme, aimed to provide the photovoltaic generators for ROSETTA: the cometary material investigation mission scheduled for launch in 2003. The LILT cells development and testing objectives are therefore focused on the following requirements: insolation intensity as low as 0.03 Solar Constant, low temperature down to -150 C and solar flare proton environment. At this stage of development, after the completion of the technology verification tests, it has been demonstrated that suitable technologies are available for the qualification of both silicon and gallium arsenide cells and both candidates have shown conversion efficiencies over 25% at an illumination of 0.03 SC and a temperature of -150 C. In particular, when measured at those LILT conditions, the newly developed 'Hl-ETA/NR-LILT' silicon solar cells have reached a conversion efficiency of 26.3%, that is the highest value ever measured on a single junction solar cell. A large quantity of both 'Hl-ETA/NR-LILT' silicon and 'GaAs/Ge-LILT' solar cells are presently under fabrication and they will be submitted to a qualification test plan, including radiation exposure, in order to verify their applicability with respect to the mission requirements. The availability of two valid options will minimize the risk for the very ambitious scientific project. The paper describes how the technical achievements have been possible with Si and GaAs LILT solar cells (including a comparison between measured and modelled l-V characteristics) and it presents the technology verification tests results.

Strobl, G.↗

Soot and Sulfuric Acid from Aircraft: Is There Enough to Cause Detrimental Environmental E-kCTSs?

Aerosol from aircraft can affect the environment in three ways: First, soot aerosol has been implicated to cause Icing-tern ozone depletion at mid-latitudes in the lower stratosphere at a rate of approx. 5% per decade. This effect is in addition and unrelated to the polar ozone holes which are strongly influenced by heterogeneous chemistry on polar stratospheric clouds. Second, the most obvious effect of jet aircraft is the formation of visible contrails in the upper troposphere. The Salt Lake City region experienced an 8% increase in cirrus cloud cover over a 15-year period which covariates with an increase in regional commercial air traffic. If soot particles act as freezing nuclei to cause contrail formation heterogeneously, they would be linked to a secondary effect to cloud modification that very likely is climatologically important. Third, a buildup of soot aerosol could reduce the single scatter albedo of stratospheric aerosol from 0.993+0.004 to 0.98, a critical value that has been postulated to separate stratospheric cooling from warming. Thus arises an important question: Do aircraft emit sufficient amounts of soot to have detrimental effects and warrant emission controls? During the 1996 SUCCESS field campaign, we sampled aerosols in the exhaust wake of a Boeing 757 aircraft and determined emission indices for sulfuric acid (EI(sub H2SO4) = 9.0E-2 and 5.0E-1 g/kg (sub FUEL) for 75 and 675 ppm fuel-sulfur, respectively) and soot aerosol (2.2E-3 less than EI(sub SOOT) = l.lE-2 g/kg (sub FUEL)). The soot particle analysis accounted for their fractal nature, determined electron-microscopically, which enhanced the surface area by a factor of 26 and the volume 11-fold over equivalent-volume spheres. The corresponding fuel-sulfur to H2SO4 conversion efficiency was 10% (for 675 ppmm fuel-S) and 37% (for 75 ppmm fuel-S). Applying the H2SO4 emission index to the 1990 fuel use by the worlds commercial fleets of 1.3E11 kg, a conversion efficiency of 30% of 500 ppmm fuel-S would have led to an annual contribution to the atmospheric sulfur budget by aircraft of 2.E7 kg H2SO4. This is about one part in 1.E4 of anthropogenic sulfate from other sources. The soot emission index given above yielded a 1990 injection of soot aerosol by aircraft of 1.E6 kg. Thus, soot amounts to only five percent of the aerosol generated by aircraft. Its reactivity with ozone would have to be 20 times that of sulfuric acid particles to make it chemically significant. Nevertheless, the findings, of stratospheric soot loadings commensurate with aircraft fuel consumption, based on the emission index given above and the assumption of stratospheric residence times of the order of one year implicate aircraft as stratospheric polluters. A trend similar to soot of H2SO4 aerosol loading could not be deciphered, neither from in situ measurements nor SAGE II satellite extinction, against the "noise" due to volcanic eruptions. Observation of soot particles at 20 km altitude which, if emitted by aircraft were generated at 10-12 km altitude, suggests a displacement of those particles against gravity. Because eddy mixing is virtually absent in the lower stratosphere and isentropic mixing explains lofting to only about 15 km, radiometric forces acting on morphologically and chemically asymmetric soot particles must be considered a possibility. The consequence could be an extended residence time of soot against that of sulfuric acid aerosol that would lower the single scatter albedo with time.

Pueschel, R. F.↗

Efficient up-conversion in CsPbBr 3 nanocrystals via phonon-driven exciton-polaron formation

Lead halide perovskite nanocrystals demonstrate efficient up-conversion, although the precise mechanism remains a subject of active research. This study utilizes steady-state and time-resolved spectroscopy methods to unravel the mechanism driving the up-conversion process in CsPbBr 3 nanocrystals. Employing above- and below-gap photoluminescence measurements, we extract a distinct phonon mode with an energy of ~7 meV and identify the Pb-Br-Pb bending mode as the phonon involved in the up-conversion process. This result was corroborated by Raman spectroscopy. We confirm an up-conversion efficiency reaching up to 75%. Transient absorption measurements under conditions of sub-gap excitation also unexpectedly reveal coherent phonons for the subset of nanocrystals undergoing up-conversion. This coherence implies that the up-conversion and subsequent relaxation is accompanied by a synchronized and phased lattice motion. This study reveals that efficient up-conversion in CsPbBr 3 nanocrystals is powered by a unique interplay between the soft lattice structure, phonons, and excited states dynamics.

Anti-Stokes Photoluminescence↗

High throughput discovery of enhanced visible photoactivity in Fe–Cr vanadate solar fuels photoanodes

Metal oxide solar absorbers are well suited for photoelectrochemical applications where requisite properties include stability in highly oxidizing environments, in addition to solar energy conversion. Metal vanadates are of particular interest due to their relatively low band gap energies compared to traditional, wide-gap photocatalysts. Concerted efforts on BiVO 4 -based photoanodes have revealed multiple avenues for improving the solar conversion efficiencies for photon energies above 2.5 eV but have not addressed the ultimate performance limitations from the undesirably high band gap energy. Fe and Cr vanadates have a lower band gap and thus a higher potential solar conversion efficiency, although to-date the absorbed 2–2.5 eV photons are not effectively converted to the desired anodic photocurrent. By using combinatorial synthesis and high throughput screening, we demonstrate that cation substitutions with the monoclinic MVO 4 phase (M = Cr, Fe) improves the utilization of photons in this energy range. Given the portfolio of photoanode improvement techniques available, we suggest optimization of (Cr 0.5 Fe 0.5 )VO 4 -based photoanodes as a promising path for enable solar fuel technologies.

14 SOLAR ENERGY↗

Diagnostic methods for a high efficiency exhaust aftertreatment system

A method includes acquiring nitrogen oxide (NOx) data indicative of a first amount of NOx in an exhaust flow exiting an engine and a second amount of NOx in the exhaust flow exiting an exhaust aftertreatment system coupled to the engine where the exhaust aftertreatment system including a selective catalytic reduction (SCR) system including a SCR catalyst; determining a NOx conversion efficiency fault is present within the exhaust aftertreatment system based on the first amount of NOx and the second amount of NOx; monitoring an actual amount of NOx in the exhaust flow downstream of the SCR catalyst; determining an expected amount of NOx downstream of the SCR catalyst; and determining the SCR catalyst is responsible for the NOx conversion efficiency fault in response to the actual amount of NOx differing from the expected amount of NOx by more than a threshold amount.

Gupta, Aniket↗

Light-induced effects-impacts to module performance measurements and reliability testing: An overview

The stability of solar cells is a key factor in determining the reliability of photovoltaic modules and is of great interest in the case of solar cells having a new technology which has not yet been fully developed. In particular this question arises with hydrogenated amorphous silicon (a-Si) solar cells because a-Si exhibits reversible light induced changes in its electronic properties, commonly referred to as the Staebler-Wronski effect (SWE). Continuous progress is being made in the peak conversion efficiencies of a-Si solar cells and efficiencies in excess of 11% have been achieved. However, stability is still a problem. ARCO Solar reports results on solar cells which, after over a year's exposure to sunlight, under open circuit conditions, still have about 7% conversion efficiency. Other results show a region of fast degradation for about a month, after which the degradation diminishes rapidly.

Wronski, C. R.↗

Biological conversion of methane to methanol at high H 2 S concentrations with an H 2 S-tolerant methanotrophic consortium

To develop biological biogas to methanol conversion technology without costly hydrogen sulfide (H 2 S) removal, a high H 2 S tolerant methanotrophic consortium (HTMC), was enriched from an anaerobic digester effluent in presence of 5.64 g/m 3 H 2 S in the gas phase. The HTMC can grow stably and produce methanol under conditions with CH 4 /air mixtures containing 5.64 g/m 3 of H 2 S. There is no significant (p>0.05) difference in cell yield or CH 4 to methanol conversion efficiency between trials with different H 2 S concentrations from 0 g/m 3 to 5.64 g/m 3 . Further, under optimal conditions, a cell yield of 0.333 g cells/g CH 4 , a methanol concentration of 0.28 mg/mL, and a CH 4 to methanol conversion efficiency of 0.22 mol/mol were obtained, respectively. Besides methanotrophs (14.85%) and other bacteria, Cyanobacteria were also identified in the HTMC with a high abundancy (32.16%), which could broaden the application of HTMC for simultaneous utilization of CH 4 and CO 2 from raw biogas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hexanary blends: a strategy towards thermally stable organic photovoltaics

Non-fullerene based organic solar cells display a high initial power conversion efficiency but continue to suffer from poor thermal stability, especially in case of devices with thick active layers. Mixing of five structurally similar acceptors with similar electron affinities, and blending with a donor polymer is explored, yielding devices with a power conversion efficiency of up to 17.6%. The hexanary device performance is unaffected by thermal annealing of the bulk-heterojunction active layer for at least 23 days at 130 °C in the dark and an inert atmosphere. Moreover, hexanary blends offer a high degree of thermal stability for an active layer thickness of up to 390 nm, which is advantageous for high-throughput processing of organic solar cells. Here, a generic strategy based on multi-component acceptor mixtures is presented that permits to considerably improve the thermal stability of non-fullerene based devices and thus paves the way for large-area organic solar cells.

36 MATERIALS SCIENCE↗

Quadratic strong coupling in AlN Kerr cavity solitons

Photonic platforms with χ (2) nonlinearity offer new degrees of freedom for Kerr frequency comb development. Here, we demonstrate Kerr soliton generation at 1550 nm with phase-matched quadratic coupling to the 775 nm harmonic band in a single AlN microring and thus the formation of dual-band mode-locked combs. In the strong quadratic coupling regime where the χ (2) phase-matching window overlaps the pump mode, the pump-to-harmonic-comb conversion efficiency is optimized. However, the strong quadratic coupling also drastically modifies the Kerr comb generation dynamics and decreases the probability of soliton generation. By engineering the χ (2) phase-matching wavelength, we are able to achieve a balance between high conversion efficiency and high soliton formation rate under the available pump power and microring quality factors. Our numerical simulations confirm the experimental observations. These findings provide guidance on tailoring single-cavity dual-band coherent comb sources.

Gong, Zheng (ORCID:0000000301704870)↗

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells

Reducing the energy loss of sub-cells is critical for high performance tandem organic solar cells, while it is limited by the severe non-radiative voltage loss via the formation of non-emissive triplet excitons. Herein, we develop an ultra-narrow bandgap acceptor BTPSeV-4F through replacement of terminal thiophene by selenophene in the central fused ring of BTPSV-4F, for constructing efficient tandem organic solar cells. The selenophene substitution further decrease the optical bandgap of BTPSV-4F to 1.17 eV and suppress the formation of triplet exciton in the BTPSV-4F-based devices. The organic solar cells with BTPSeV-4F as acceptor demonstrate a higher power conversion efficiency of 14.2% with a record high short-circuit current density of 30.1 mA cm –2 and low energy loss of 0.55 eV benefitted from the low non-radiative energy loss due to the suppression of triplet exciton formation. We also develop a high-performance medium bandgap acceptor O1-Br for front cells. By integrating the PM6:O1-Br based front cells with the PTB7-Th:BTPSeV-4F based rear cells, the tandem organic solar cell demonstrates a power conversion efficiency of 19%. The results indicate that the suppression of triplet excitons formation in the near-infrared-absorbing acceptor by molecular design is an effective way to improve the photovoltaic performance of the tandem organic solar cells.

14 SOLAR ENERGY↗

Photon pumping in a weakly-driven quantum cavity–spin system

Highlights: • We study photon frequency conversion in a driven spin coupled to a cavity mode. • Quantized frequency conversion is excpected in the strong-drive adiabatic limit. • A new photon pumping effect is established in the accessible weak drive regime. • Pumping is linked to the delocalization of the corresponding Floquet states. • Quantum coherence is preserved in both the strong and ultraweak-drive limits. We investigate the photon pumping effect in a topological model consisting of a periodically driven spin-1/2 coupled to a quantum cavity mode out of the adiabatic limit. In the strong-drive adiabatic limit, a quantized frequency conversion of photons is expected as the temporal analog of the Hall current. We numerically establish a novel photon pumping phenomenon in the experimentally accessible nonadiabatic driving regime for a broad region of the parameter space. The photon frequency conversion efficiency exhibits strong fluctuations and high efficiency that can reach up 80% of the quantized value for commensurate frequency combinations. We link the pumping properties to the delocalization of the corresponding Floquet states which display multifractal behavior as the result of hybridization between localized and delocalized sectors. Finally we demonstrate that the quantum coherence properties of the initial state are preserved during the frequency conversion process in both the strong and ultra-weak-drive limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High Efficiency Microwave Power Amplifier: From the Lab to Industry

Since the beginnings of space travel, various microwave power amplifier designs have been employed. These included Class-A, -B, and -C bias arrangements. However, shared limitation of these topologies is the inherent high total consumption of input power associated with the generation of radio frequency (RF)/microwave power. The power amplifier has always been the largest drain for the limited available power on the spacecraft. Typically, the conversion efficiency of a microwave power amplifier is 10 to 20%. For a typical microwave power amplifier of 20 watts, input DC power of at least 100 watts is required. Such a large demand for input power suggests that a better method of RF/microwave power generation is required. The price paid for using a linear amplifier where high linearity is unnecessary includes higher initial and operating costs, lower DC-to-RF conversion efficiency, high power consumption, higher power dissipation and the accompanying need for higher capacity heat removal means, and an amplifier that is more prone to parasitic oscillation. The first use of a higher efficiency mode of power generation was described by Baxandall in 1959. This higher efficiency mode, Class-D, is achieved through distinct switching techniques to reduce the power losses associated with switching, conduction, and gate drive losses of a given transistor.

Sims, William Herbert, III↗

High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor

Tandem organic solar cells are based on the device structure monolithically connecting two solar cells to broaden overall absorption spectrum and utilize the photon energy more efficiently. Herein, we demonstrate a simple strategy of inserting a double bond between the central core and end groups of the small molecule acceptor Y6 to extend its conjugation length and absorption range. As a result, a new narrow bandgap acceptor BTPV-4F was synthesized with an optical bandgap of 1.21 eV. The single-junction devices based on BTPV-4F as acceptor achieved a power conversion efficiency of over 13.4% with a high short-circuit current density of 28.9 mA cm -2 . With adopting BTPV-4F as the rear cell acceptor material, the resulting tandem devices reached a high power conversion efficiency of over 16.4% with good photostability. The results indicate that BTPV-4F is an efficient infrared-absorbing narrow bandgap acceptor and has great potential to be applied into tandem organic solar cells.

36 MATERIALS SCIENCE↗

Design Considerations for High-Voltage Insulated Gate Drive Power Supply for 10-kV SiC MOSFET Applied in Medium-Voltage Converter

High-performance gate drive power supply (GDPS) plays a crucial role in ensuring the reliability and safety of the gate driver for power semiconductor devices. This article focuses on the design of a high-voltage-insulated GDPS for the 10-kV silicon carbide MOSFET in medium-voltage (MV) application. Design considerations, including insulation scheme, high-voltage-insulated transformer design, and load voltage regulation scheme, are proposed. In addition, the performance of the secondary-side-regulated (SSR) GDPS and that of the primary-side-regulated (PSR) GDPS are compared for several aspects, including interwinding capacitance, load voltage regulation rate, conversion efficiency, and hardware complexity. Finally, an SSR GDPS and a PSR GDPS, with an insulation voltage of 20 kV, are built in the lab. Furthermore, the test results demonstrate that the PSR GDPS is more preferable because of lower interwinding capacitance, lower load voltage regulation rate, higher conversion efficiency, and simpler control circuit.

42 ENGINEERING↗

Hierarchical Control and Stability Analysis for a Nonisolated Grid-Tied DC Energy Router Integrating Energy Storage and Partial Distributed Generation

This article proposes a nonisolated dc converter-based energy router (dc-ER) and its operating strategy. Here, the intent is to integrate energy storage (ES), distributed generation (DG), local load, and dc power grid in an autonomous and more efficient way. The ES/DG power ports are coupled with each other in partial-type connections, which obtains higher voltage supply gain and direct input–output power transmission. High-voltage supply gain allows a wide solar power tracking range and the possibility of optimal battery charging/discharging. Direct input–output power transmission improves the energy conversion efficiency. In this article, the operating modes of dc-ER are first analyzed, followed by the optimal hardware design counting the DG current ripple minimization and the limitation caused by the power flow direction. Second, the mathematical model of dc-ER is deduced. The hierarchical control is then proposed to manage port energy in a flexible manner. The stability is analyzed by using impedance modeling. Finally, experimental and simulation results verify the superiorities of the proposed topology in terms of flexible operating mode transition and high-power conversion efficiency.

25 ENERGY STORAGE↗