Phase quadrature-plural channel data transmission system Patent
Plural channel data transmission system with quadrature modulation and complementary demodulation
Munoz, R. M.↗
SEARCH · Engineering Papers
Results for “complementary”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
NACA Conference on Aircraft Loads, Structures, and Flutter
This document contains reproductions of technical papers on some of the most recent research results on aircraft loads, flutter, and structures from the NACA laboratories. These papers were presented by members of the staff of the NACA laboratories at the Conference held at the Langley Aeronautical Laboratory March 5, 6, and 7, 1957. The primary purpose of this Conference was to convey to contractors of the military services and others concerned with the design of aircraft these recent research results and to provide those attending an opportunity to discuss the results. The papers in this document are in the same form in which they were presented at the Conference in order to facilitate their prompt distribution. The original presentation and this record are considered as complementary to, rather than as substitutes for, the Committee?s more complete and formal reports. Accordingly, if information from this document is utilized it is requested that this document not be listed as a reference. Individual reports dealing with most of the information presented at the Conference will subsequently be published by NACA and will therefore be suitable as reference material.
Source record↗
Silicon-controlled-rectifier square-wave inverter with protection against commutation failure
The square-wave SCR inverter that was designed, built, and tested includes a circuit to turn off the inverter in case of commutation failure. The basic power stage is a complementary impulse-commutated parallel inverter consisting of only six components. The 400-watt breadboard was tested while operating at + or - 28 volts, and it had a peak efficiency of 95.5 percent at 60 hertz and 91.7 percent at 400 hertz. The voltage regulation for a fixed input was 3 percent at 60 hertz. An analysis of the operation and design information is included.
Birchenough, A. G.↗
Design, development, fabrication and delivery of register and multiplexer units
Two complementary MOS monolithic chip types were developed, which contain a register and multiplexer unit to be used in the central processing unit of a digital computer. The partition of the logic into a chip size consistent with the characteristics of the packages is discussed. The logic was implemented by specially configured circuitry designed to layout, as well as to optimize, performance by taking advantage of the properties of CMOS logic. Of several approaches considered for generating LSI CMOS arrays, the CMOS standard cell array design technique was selected. These design automation techniques were used to generate the chip layout, art work and working master plates, followed by the fabrication and testing of the two chip types. Sixty functional LSI arrays were delivered.
Feller, A.↗
S-band transponder experiment
The experiment which derives data from three lunar-orbiting objects, the command-service module (CSM), the lunar module (LM), and the subsatellite in the S-band is described. Each provides detailed information on the near-side lunar gravitational field. The primary emphasis is on the low-altitude (20 km) CSM data. The LM data cover a very short time span and are somewhat redundant with the CSM data. The resolution of the high-altitude (100 km) CSM data is not as great as that of the low altitude data. The low-altitude CSM and LM data coverage and the complementary coverage obtained during the Apollo 14 mission are presented. The experiment uses the same technique of gravity determination employed on the Lunar Orbiter, in the data of which the large anomalies called mascons were first observed. The data consist of variations in the spacecraft speed as measured by the Earth-based radio tracking system.
Sjogren, W. L.↗
Miniature biotelemeter gives multichannel wideband biomedical data
A miniature biotelemeter was developed for sensing and transmitting multiple channels of biomedical data over a radio link. The design of this miniature, 10-channel, wideband (5 kHz/channel), pulse amplitude modulation/ frequency modulation biotelemeter takes advantage of modern device technology (e.g., integrated circuit operational amplifiers, complementary symmetry/metal oxide semiconductor logic, and solid state switches) and hybrid packaging techniques. The telemeter is being used to monitor 10 channels of neuron firings from specific regions of the brain in rats implanted with chronic electrodes. Design, fabrication, and testing of an engineering model biotelemeter are described.
Carraway, J. B.↗
Fatigue and fail-safe design features of the DC-10 airplane
The philosophy and methods used in the design of the DC-10 aircraft to assure structural reliability against cracks under repeated service loads are described in detail. The approach consists of three complementary parts: (1) the structure is designed to be fatigue resistant for a crack-free life of 60,000 flight hours; (2) inasmuch as small undetected cracks could develop from other sources, such as material flaws and manufacturing preloads, the structure also is designed to arrest and control cracks within a reasonable service-inspection interval; and (3) a meaningful service-inspection program has been defined on the basis of analysis and test experience from the design development program. This service-inspection program closes the loop to assure the structural integrity of the DC-10 airframe. Selected materials, fasteners, and structural arrangements are used to achieve these design features with minimum structural weight and with economy in manufacturing and maintenance. Extensive analyses and testing were performed to develop and verify the design. The basic design considerations for fatigue-resistant structure are illustrated in terms of material selection, design loads spectra, methods for accurate stress and fatigue damage analysis, and proven concepts for efficient detail design.
Stone, M. E.↗
A flexible high-speed sequential decoder for deep space channels.
This paper describes a sequential decoding machine built at the Jet Propulsion Laboratory (JPL), which uses a 3-bit quantization of the code symbols and achieves a computation rate of MHz. This machine is flexible and can be programmed to decode any complementary convolutional code with rates down to 1/4 and constraint lengths up to 32. In addition, metric programmability is provided for optimization of decoder performance with respect to channel parameter variations.
Layland, J. W.↗
Comparison of SLAR images and small-scale, low-sun aerial photographs.
A comparison of side-looking airborne radar (SLAR) images and black and white aerial photos of similar scale and illumination of an area in the Mojave Desert of California shows that aerial photos yield far more information about geology than do SLAR images because of greater resolution, tonal range, and geometric fidelity, and easier use in stereo. Nevertheless, radar can differentiate some materials or surfaces that aerial photos cannot; thus, they should be considered as complementary, rather than competing tools in geologic investigations. The most significant advantage of SLAR, however, is its freedom from the stringent conditions of weather, date, and time that are required by small-scale aerial photos taken with a specified direction and angle of illumination. Indeed, in low latitudes, SLAR is the only way to obtain small-scale images with low illumination from certain directions; moreover, in areas of nearly continuous cloudiness, radar may be the only practical source of small-scale images.
Clark, M. M.↗
Transport processes in the thermosphere.
Description of two different approaches which have been undertaken to consider horizontal transport in the upper atmosphere by large-scale circulation. First and most direct, the horizontal wind field in the middle and upper thermosphere was calculated based on the pressure distributions derived from satellite orbital decay observations. The continuity conditions were used to calculate the vertical motions. The second approach was to evaluate the energy deficits or surpluses as a function of altitude and latitude and to assume the presence of vertical motions sufficient to balance these deficits or surpluses by compressional heating or cooling. Then continuity conditions were used to derive horizontal winds. The results of the two approaches are compatible, and are largely complementary. Downward velocities are near 1 m/sec at 300 km over the diurnal minimum and the winter polar region, and 1 cm/sec at 100 km over the winter polar region.
Johnson, F. S.↗
The earth orbit shuttle as a space rescue vehicle.
According to present concepts starting with some future date all manned space missions beyond low-earth orbit are to originate in low-earth orbit and to return ultimately to low-earth orbit. The Earth-Orbit-Shuttle (EOS) is visualized as the only vehicle operating between earth and low-earth orbit. The ability of the EOS to provide rescue services in the case of emergency is evaluated. It is found that an employment of the EOS as rescue vehicle is basically feasible, although it has certain limitations. Complementary means of transportation are required for emergencies beyond low-earth orbit. Approaches to enhance the rescue mission utility of the EOS are discussed.
Hinton, M. G., Jr.↗
Electron-beam flow visualization - Applications in the definition of configuration aerothermal characteristics.
Comparisons between flow visualization systems using electron-beam fluorescence, schlieren, and shadowgraph techniques illustrate the advantages associated with the electron beam. Specific applications of this method as an aid in defining the origin of erosion on a heat-transfer model are cited. Results of combined electron-beam oil-flow studies on configurations illustrate that the simultaneous definition of the external flow field and its surface flow can be obtained. Comparisons between the electron-beam oil-flow visualization method and phase-change coating heat-transfer tests on a shuttle ascent configuration indicate the complementary nature of these two testing techniques. Potential methods for improving the electron-beam technique are included.
Woods, W. C.↗
Fast recharge circuit for q-switched lasers
Cavity-dumped lasers employ electrooptic-effect cell to alternately block and release laser pulse. Cell requires high-speed switching circuit that can apply and remove high voltage. Solid-state circuit employs complementary transistor switches which can switch at rates greater than 5 kHz, eliminate warmup time, provide variable voltage wave-form, and allow polarity reversal.
Hansen, R. L.↗
Development of ferrite logic devices for an arithmetic processor
A number of fundamentally ultra-reliable, all-magnetic logic circuits are developed using as a basis a single element ferrite structure wired as a logic delay element. By making minor additions or changes to the basic wiring pattern of the delay element other logic functions such as OR, AND, NEGATION, MAJORITY, EXCLUSIVE-OR, and FAN-OUT are developed. These logic functions are then used in the design of a full-adder, a set/reset flip-flop, and an edge detector. As a demonstration of the utility of all the developed devices, an 8-bit, all-magnetic, logic arithmetic unit capable of controlled addition, subtraction, and multiplication is designed. A new basic ferrite logic element and associated complementary logic scheme with the potential of improved performance is also described. Finally, an improved batch process for fabricating joint-free power drive and logic interconnect conductors for this basic class of all-magnetic logic is presented.
Heckler, C. H., Jr.↗
Identification of phenological stages and vegetative types for land use classification
The author has identified the following significant results. Two procedures for examining ERTS-1 imagery were investigated in cooperation with the photographic services section. Positive, 10X enlargements were produced of spectral bands 4, 6, and 7, for a portion of photo 1033-21020. Adequate detail remained to recognize physical features such as streams, glaciers, ice, and snow. Also the entire image was studied using transparencies produced by the 3M color-key process. A combination of three complementary color combinations produced visually recognizable shades apparently indicating vegetation differences. Also lakes and glacial streams of sufficient size, ice and snow, and drainage patterns can be recognized. A need is indicated for oblique low level color aerial photography in the vicinity of identifiable terrain features to assist in the positive location of vegetative communities appearing in the analysis process. In the primary areas of concern to this project identifiable manmade features are conspicuous by their absence. In image 1049-20505 band 7 produced distinct tonal differences on a mountain slope to river bottom gradient.
Branton, C. I.↗
Expendable second stage reusable space shuttle booster. Volume 1: Executive summary
The development of an expendable second stage for use with a reusable space shuttle booster is discussed. The configuration of a low-cost, reusable multipurpose space transportation system for the 1980 time period is presented. A system capable of economically placing payloads in earth orbit which are larger and heavier than can be carried in the shuttle orbiter cargo bay is defined. The ESS/reusable shuttle system is complementary to the space shuttle system and provides mission flexibility to permit economical expansion of the overall space program.
Source record↗
Mariner Mars 1971 project. Volume 3: Mission operations system implementation and standard mission flight operations
The Mariner Mars 1971 mission which was another step in the continuing program of planetary exploration in search of evidence of exobiological activity, information on the origin and evolution of the solar system, and basic science data related to the study of planetary physics, geology, planetology, and cosmology is reported. The mission plan was designed for two spacecraft, each performing a separate but complementary mission. However, a single mission plan was actually used for Mariner 9 because of failure of the launch vehicle for the first spacecraft. The implementation is described, of the Mission Operations System, including organization, training, and data processing development and operations, and Mariner 9 spacecraft cruise and orbital operations through completion of the standard mission from launch to solar occultation in April 1972 are discussed.
Source record↗
Combining human and computer interpretation capabilities to analyze ERTS imagery
The human photointerpreter and the computer have complementary capabilities that are exploited in a computer-based data analysis system developed at the Forestry Remote Sensing Laboratory, University of California. This system is designed to optimize the process of extracting resource information from ERTS images. The human has the ability to quickly delineate gross differences in land classes, such as wildland, urban, and agriculture on appropriate ERTS images, and to further break these gross classes into meaningful subclasses. The computer, however, can more efficiently analyze point-by-point spectral information and localized textural information which can result in a much more detailed agricultural or wildland classification based on species composition and/or plant association. These human and computer capabilities have been integrated through the use of an inexpensive small scale computer dedicated to the interactive preprocessing of the human inputs and the display of raw ERTS images and computer classified images. The small computer is linked to a large scale computer system wherein the bulk of the statistical work and the automatic point-by-point classification is done.
Nichols, J. D.↗