Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “color mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Automated thermal mapping techniques using chromatic image analysis

Thermal imaging techniques are introduced using a chromatic image analysis system and temperature sensitive coatings. These techniques are used for thermal mapping and surface heat transfer measurements on aerothermodynamic test models in hypersonic wind tunnels. Measurements are made on complex vehicle configurations in a timely manner and at minimal expense. The image analysis system uses separate wavelength filtered images to analyze surface spectral intensity data. The system was initially developed for quantitative surface temperature mapping using two-color thermographic phosphors but was found useful in interpreting phase change paint and liquid crystal data as well.

Buck, Gregory M.↗
NASA NTRS1989

Automated thermal mapping techniques using chromatic image analysis

Thermal imaging techniques are introduced using a chromatic image analysis system and temperature sensitive coatings. These techniques are used for thermal mapping and surface heat transfer measurements on aerothermodynamic test models in hypersonic wind tunnels. Measurements are made on complex vehicle configurations in a timely manner and at minimal expense. The image analysis system uses separate wavelength filtered images to analyze surface spectral intensity data. The system was initially developed for quantitative surface temperature mapping using two-color thermographic phosphors but was found useful in interpreting phase change paint and liquid crystal data as well.

Buck, Gregory M.↗
NASA NTRS1991

An atlas of monthly mean distributions of GEOSAT sea surface height, SSMI surface wind speed, AVHRR/2 sea surface temperature, and ECMWF surface wind components during 1988

Monthly mean global distributions for 1988 are presented with a common color scale and geographical map. Distributions are included for sea surface height variation estimated from GEOSAT; surface wind speed estimated from the Special Sensor Microwave Imager on the Defense Meteorological Satellite Program spacecraft; sea surface temperature estimated from the Advanced Very High Resolution Radiometer on NOAA spacecrafts; and the Cartesian components of the 10m height wind vector computed by the European Center for Medium Range Weather Forecasting. Charts of monthly mean value, sampling distribution, and standard deviation value are displayed. Annual mean distributions are displayed.

Halpern, D.↗
NASA NTRS1993

An atlas of monthly mean distributions of SSMI surface wind speed, ARGOS buoy drift, AVHRR/2 sea surface temperature, and ECMWF surface wind components during 1990

The following monthly mean global distributions for 1990 are proposed with a common color scale and geographical map: 10-m height wind speed estimated from the Special Sensor Microwave Imager (SSMI) on a United States (US) Air Force Defense Meteorological Satellite Program (DMSP) spacecraft; sea surface temperature estimated from the advanced very high resolution radiometer (AVHRR/2) on a U.S. National Oceanic and Atmospheric Administration (NOAA) spacecraft; Cartesian components of free drifting buoys which are tracked by the ARGOS navigation system on NOAA satellites; and Cartesian components on the 10-m height wind vector computed by the European Center for Medium-Range Weather Forecasting (ECMWF). Charts of monthly mean value, sampling distribution, and standard deviation values are displayed. Annual mean distributions are displayed.

Halpern, D.↗
NASA NTRS1993

An atlas of monthly mean distributions of SSMI surface wind speed, ARGOS buoy drift, AVHRR/2 sea surface temperature, and ECMWF surface wind components during 1991

The following monthly mean global distributions for 1991 are presented with a common color scale and geographical map: 10-m height wind speed estimated from the Special Sensor Microwave Imager (SSMI) on a United States Air Force Defense Meteorological Satellite Program (DMSP) spacecraft; sea surface temperature estimated from the advanced very high resolution radiometer (AVHRR/2) on a U.S. National Oceanic and Atmospheric Administration (NOAA) spacecraft; Cartesian components of free-drifting buoys which are tracked by the ARGOS navigation system on NOAA satellites; and Cartesian components of the 10-m height wind vector computed by the European Center for Medium-Range Weather Forecasting (ECMWF). Charts of monthly mean value, sampling distribution, and standard deviation value are displayed. Annual mean distributions are displayed.

Halpern, D.↗
NASA NTRS1995

An atlas of monthly mean distributions of SSMI surface wind speed, AVHRR/2 sea surface temperature, AMI surface wind velocity, TOPEX/POSEIDON sea surface height, and ECMWF surface wind velocity during 1993

The following monthly mean global distributions for 1993 are presented with a common color scale and geographical map: 10-m height wind speed estimated from the Special Sensor Microwave Imager (SSMI) on a United States (U.S.) Air Force Defense Meteorological Satellite Program (DMSP) spacecraft; sea surface temperature estimated from the Advanced Very High Resolution Radiometer (AVHRR/2) on a U.S. National Oceanic and Atmospheric Administration (NOAA) satellite; 10-m height wind speed and direction estimated from the Active Microwave Instrument (AMI) on the European Space Agency (ESA) European Remote Sensing (ERS-1) satellite; sea surface height estimated from the joint U.S.-France Topography Experiment (TOPEX)/POSEIDON spacecraft; and 10-m height wind speed and direction produced by the European Center for Medium-Range Weather Forecasting (ECMWF). Charts of annual mean, monthly mean, and sampling distributions are displayed.

Halpern, D.↗
NASA NTRS1993

Observations of deformation and mixing of the total ozone field in the Antarctic polar vortex

Total Ozone Mapping Spectrometer (TOMS) images of the springtime Southern Hemisphere commonly show concentric layers in the total ozone field outside the Antarctic polar vortex. The layering appears to result from horizontal folding and stretching of regions on the equatorward flank of the polar vortex near the midlatitude ozone maximum. This folding and stretching interleaves low and high ozone air from the subtropics and midlatitudes, respectively. Occaisional large amplitude wave events can extract very low ozone air from the interior of the polar vortex (the Antarctic ozone hole), but the folding and stretching occurs in midlatitiudes even when wave amplitudes are not exceptionally large. The folding and stretching results in relatively rapid horizontal mixing of the atmosphere on the equatorward flank of the jet. This type of Lagrangian behavior may be common in the atmosphere, but is visible when local tracer gradients are large and observations with high spatial resolution are available. Also, experimentation has shown that gray-scale images of TOMS data show the details of the spatial distribution of ozone much more clearly than contour maps or false-color images.

Bowman, Kenneth P.↗
NASA NTRS2003

Mars Odyssey THEMIS-VIS: Surface-Atmosphere Separation and Derivation of Aerosol Properties

Scattering by atmospheric aerosols can contribute a substantial fraction of the visible-light radiance observed in any remote sensing of Mars. Our objective is to develop techniques to separate this aerosol component from the surface-reflectance component in Mars Odyssey's THEMIS Visible Imaging Subsystem (THEMIS-VIS) dataset. The primary purpose of this study is the production of accurate surface reflectance data in order to allow for reliable color and mineralogical unit mapping. The second principal goal is to study the feasibility of using VIS measurements to derive quantitative information about ice and dust aerosol properties such as particle size and optical depth.

T H McConnochie↗
NASA NTRS2005

Pressure-Sensitive Paint Investigation of Double-Delta Wing Vortex Flow Manipulation

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the effect of wing fillets on the global vortex-induced surface static pressure field about a sharp leading-edge 76 deg/40 deg double delta wing, or strake-wing, model at subsonic and transonic speeds. Global calibrations of the PSP were obtained at M = 0.50, 0.70, 0.85, 0.95, and 1.20, a Reynolds number per unit length of 2.0 million, and angles of attack from 10 degrees to 30 degrees using an in-situ method featuring the simultaneous acquisition of electronically-scanned pressures (ESP) at discrete locations on the model. The mean error in the PSP measurements relative to the ESP data was approximately 2 percent or less at M = 0.50 to 0.85 but increased to several percent at M = 0.95 and 1.20. The PSP pressure distributions and pseudo-colored planform view pressure maps clearly revealed the vortex-induced pressure signatures at all Mach numbers and angles of attack. Small fillets having a parabolic or diamond planform situated at the strake-wing intersection were designed to manipulate the vortical flows by, respectively, removing the leading-edge discontinuity or introducing additional discontinuities. The fillets caused global changes in the vortex-dominated surface pressure field that were effectively captured in the PSP measurements. The vortex surface pressure signatures were compared to available off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The fillet effects on the PSP pressure distributions and the observed leading-edge vortex flow characteristics were consistent with the trends in the measured lift, drag, and pitching moment coefficients.

Erickson, Gary E.↗
NASA NTRS2004

Pressure-Sensitive Paint Investigation of Double-Delta Wing Vortex Flow Manipulation

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the effect of wing fillets on the global vortex-induced surface static pressure field about a sharp leading-edge 76o/40o double delta wing, or strake-wing, model at subsonic and transonic speeds. Global calibrations of the PSP were obtained at M = 0.50, 0.70, 0.85, 0.95, and 1.20, a Reynolds number per unit length of 2.0 million, and angles of attack from 10 degrees to 20 degrees using an in-situ method featuring the simultaneous acquisition of electronically-scanned pressures (ESP) at discrete locations on the model. The mean error in the PSP measurements relative to the ESP data was approximately 2 percent or less at M = 0.50 to 0.85 but increased to several percent at M =0.95 and 1.20. The PSP pressure distributions and pseudo-colored planform view pressure maps clearly revealed the vortex-induced pressure signatures at all Mach numbers and angles of attack. Small fillets having a parabolic or diamond planform situated at the strake-wing intersection were designed to manipulate the vortical flows by, respectively, removing the leading-edge discontinuity or introducing additional discontinuities. The fillets caused global changes in the vortex-dominated surface pressure field that were effectively captured in the PSP measurements. The vortex surface pressure signatures were compared to available off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The fillet effects on the PSP pressure distributions and the observed leading-edge vortex flow characteristics were consistent with the trends in the measured lift, drag, and pitching moment coefficients.

Erickson, Gary E.↗
NASA NTRS2009

Spinoff 2009

Topics covered include: Image-Capture Devices Extend Medicine's Reach; Medical Devices Assess, Treat Balance Disorders; NASA Bioreactors Advance Disease Treatments; Robotics Algorithms Provide Nutritional Guidelines; "Anti-Gravity" Treadmills Speed Rehabilitation; Crew Management Processes Revitalize Patient Care; Hubble Systems Optimize Hospital Schedules; Web-based Programs Assess Cognitive Fitness; Electrolyte Concentrates Treat Dehydration; Tools Lighten Designs, Maintain Structural Integrity; Insulating Foams Save Money, Increase Safety; Polyimide Resins Resist Extreme Temperatures; Sensors Locate Radio Interference; Surface Operations Systems Improve Airport Efficiency; Nontoxic Resins Advance Aerospace Manufacturing; Sensors Provide Early Warning of Biological Threats; Robot Saves Soldier's Lives Overseas (MarcBot); Apollo-Era Life Raft Saves Hundreds of Sailors; Circuits Enhance Scientific Instruments and Safety Devices; Tough Textiles Protect Payloads and Public Safety Officers; Forecasting Tools Point to Fishing Hotspots; Air Purifiers Eliminate Pathogens, Preserve Food; Fabrics Protect Sensitive Skin from UV Rays; Phase Change Fabrics Control Temperature; Tiny Devices Project Sharp, Colorful Images; Star-Mapping Tools Enable Tracking of Endangered Animals; Nanofiber Filters Eliminate Contaminants; Modeling Innovations Advance Wind Energy Industry; Thermal Insulation Strips Conserve Energy; Satellite Respondent Buoys Identify Ocean Debris; Mobile Instruments Measure Atmospheric Pollutants; Cloud Imagers Offer New Details on Earth's Health; Antennas Lower Cost of Satellite Access; Feature Detection Systems Enhance Satellite Imagery; Chlorophyll Meters Aid Plant Nutrient Management; Telemetry Boards Interpret Rocket, Airplane Engine Data; Programs Automate Complex Operations Monitoring; Software Tools Streamline Project Management; Modeling Languages Refine Vehicle Design; Radio Relays Improve Wireless Products; Advanced Sensors Boost Optical Communication, Imaging; Tensile Fabrics Enhance Architecture Around the World; Robust Light Filters Support Powerful Imaging Devices; Thermoelectric Devices Cool, Power Electronics; Innovative Tools Advance Revolutionary Weld Technique; Methods Reduce Cost, Enhance Quality of Nanotubes; Gauging Systems Monitor Cryogenic Liquids; Voltage Sensors Monitor Harmful Static; and Compact Instruments Measure Heat Potential.

Source record↗
NASA NTRS2020

Confirmation of the Stellar Binary Microlensing Event, Macho 97-BLG-28

The high-magnification microlensing event MACHO-97-BLG-28 was previously determined to be a binary system composed of either two M dwarfs or an M dwarf and a brown dwarf. We present a revised light-curve model using additional data from the Mt. Stromlo 74″telescope, model estimates of stellar limb darkening, and fitting of the blend separately for each telescope and passband. We find a lensing system with a larger mass ratio, q=0.28±0.01, and smaller projected separation, s=0.61±0.01, than those presented in the original study. We revise the estimate of the lens–source relative proper motion to μ(rel)=2.8±0.5 mas/yr, which indicates that 16.07 yr after the event maximum the lens and source should have separated by 46±8 mas. We revise the radius of the source star using more recent reddening maps and angular diameter–color relations to R(*)=(10.3±1.9) R(ʘ). K- and J-band adaptive optics images of the field taken at this epoch using the NIRC2 imager on the Keck telescope show that the source and lens are still blended, consistent with our light-curve model. With no statistically significant excess flux detection we constrain the mass, M(L)=0.24 (+0.28, -0.12) M(ʘ), and distance, D(L)=7.0±1.0 kpc, of the lensing system. This supports the interpretation of this event as a stellar binary in the Galactic bulge. This lens mass gives a companion mass of M= 0.07(+0.08,-0.04) M(ʘ), close to the boundary between being a star and a brown dwarf.

W. Blackman↗
NASA NTRSDate not supplied

End-User Assessment of the NASA SPoRT Lightning AI Product

The NASA Short-term Prediction Research and Transition (SPoRT) Center has begun to develop products to address operational challenges and enhance safety during the lifecycle of lightning activity, and conduct evaluations in concentrated R2O/O2R efforts. The product evaluated for this study is Lightning Artificial Intelligence (A.I.), which predicts the probability of lightning out to 15 minutes in advance and spatially maps it using filled color contours. Lightning A.I. uses reflectivity, differential reflectivity, and correlation coefficient data from a subset of radars within the NEXRAD network to generate lightning probabilities at approximately 2 km resolution. The domains, spanning 145 x 145 km are centered over NASA-affiliated centers across the CONUS and use radar data which are closest in proximity. Lightning A.I. was developed with intended use by emergency managers at NASA centers. However, National Weather Service (NWS) offices are also often tasked with monitoring and forecasting the threat for lightning within their County Warning Areas for various impact-based decision support services. These forecasts are typically provided for aviation operations and large-scale, outdoor events, which may have varying safety requirements for decision-making based on lightning proximity and recency. The NASA SPoRT center conducted an assessment of the operational uses of Lightning A.I by various collaborative NWS Offices from late July into early September. This assessment included feedback from participants on both the product itself as well as its accessibility within the new, interactive NASA SPoRT Lightning Viewer. This presentation will include background information about Lightning A.I. and highlight results from this assessment. The feedback from the assessment will be used to inform research on any necessary modifications to this and future lightning products to assist end users.

Kelley Murphy↗
NASA NTRS1981

Remote sensing in West Virginia

Low altitude black and white aerial photography is the prinicipal remote sensing tool for geologic investigations in West Virginia, although side looking radar and color infrared photography are also used. The first land use/cover map for the state was produced in color infrared and is being digitized. Linear features in Cabell and Wayne Counties, as revealed by LANDSAT, were evaluated to test the possible correlations with rock fractures and gas production from shales. A LANDSAT linear features map (1:250,000) was prepared for the entire state, also. Presently investigations are being made to understand karst and to predict areas that should not be used for development. Aerial photography and field mapping is being conducted to detect the location and causes of landslides.

Lessing, P.↗
NASA NTRS1973

Dynamics of distribution and density of phreatophytes and other arid land plant communities

The author has identified the following significant results. Ground truth measurements of plant coverage on six satellite overflight dates reveal unique trends in coverage for the five desert or semi-desert communities selected. Densitometry and multispectral additive color viewing were used in a preliminary analysis of imagery using the electronic satellite image analyzer console at Stanford Research Institute. The densitometric analysis shows promise for mapping boundaries between plant communities. Color additive viewing of a chronologic sequence of the same scene shown in rapid order will provide a method for mapping phreatophyte communities.

Turner, R. M.↗
NASA NTRS1975

Summary of space imagery studies in Utah and Nevada

LANDSAT-1, Skylab, and RB-57 imagery acquired within days of each other of the San Rafael swell enabled geological mapping of individual formations of the southern portion of this broad anticlinal feature in eastern Utah. Mapping at a scale of 1/250,000 on an enhanced and enlarged S-190B image resulted in a geological map showing correlative mappable features that are indicated on the geological map of Utah at the same scale. An enhanced enlargement of an S-190B color image at a scale of 1/19,200 of the Bingham Porphyry Copper deposit allowed comparison of a geological map of the area with the space imagery map as fair for the intrusion boundaries and total lack of quality for mapping the sediments. Hydrothermal alteration is only slightly evident on space imagery at Bingham but in the Tintic mining district and the volcanic piles of the Keg and Thomas ranges, Utah, hydrothermal alteration is readily mapped on color enlargements of S-190B (SL-3, T3-3N Tr-2). A mercury soil-gas analyzer was developed for locating hidden mineralized zones which were suggested from space imagery.

Jensen, M. L.↗
NASA NTRS1993

Graphics-Printing Program For The HP Paintjet Printer

IMPRINT utility computer program developed to print graphics specified in raster files by use of Hewlett-Packard Paintjet(TM) color printer. Reads bit-mapped images from files on UNIX-based graphics workstation and prints out three different types of images: wire-frame images, solid-color images, and gray-scale images. Wire-frame images are in continuous tone or, in case of low resolution, in random gray scale. In case of color images, IMPRINT also prints by use of default palette of solid colors. Written in C language.

Atkins, Victor R.↗