Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cluster characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Biomass yields, reproductive fertility, compositional analysis, and genetic diversity of newly developed triploid giant miscanthus hybrids

Abstract Miscanthus × giganteus (giant miscanthus), first found as a naturally occurring hybrid, has shown promise as a bioenergy/biomass crop throughout much of the temperate world. This allotriploid (2 n = 3 x = 57) hybrid resulted from a cross between tetraploid Miscanthus sacchariflorus (2 n = 4 x = 76) and diploid Miscanthus sinensis (2 n = 2 x = 38) and is particularly desirable due to its low fertility that minimizes reseeding and potential invasiveness. However, there is limited genetic diversity in commonly grown cultivars of triploid M. × giganteus and breeding and development efforts to improve and domesticate this crop have been minimal. Here, we report on newly developed M. × giganteus hybrids compared with the industry standard M. × giganteus '1993‐1780'. Dry biomass yields of new hybrids ranged from 19.5 to 32.4 Mg/ha/year for the fourth growing season, compared with 21.0 Mg/ha/year for M. × giganteus '1993‐1780'. Plant reproductive fertility remained low for all accessions with overall fertility [(seed set × seed germination)/100] ranging from 0.3% to 4.5% for new hybrids compared to 0.4% for M. × giganteus '1993‐1780'. Culm density and height varied among accessions and were positively correlated with increased biomass. Based on compositional analyses, theoretical ethanol yields ranged from 9, 740 to 16,278 L/ha/year for new hybrids compared to 10,406 L/ha/year for M. × giganteus '1993‐1780'. Relative feed value indices were low overall and ranged between 66.0 and 72.8 for new hybrids compared to M. × giganteus '1993‐1780' with 71.3. The genetic diversity of new hybrids, compared with existing cultivars, was characterized using whole genome sequences. Based on pair‐wise distances, cluster analysis clearly showed increased diversity of new hybrids compared with earlier selections. These results document new triploid hybrids of M. × giganteus with enhanced biomass and theoretical ethanol yields in combination with broader genetic diversity and lowreproductive fertility.

Touchell, Darren H.↗

Hydroxide films on mica form charge-stabilized microphases that circumvent nucleation barriers

Crystal nucleation is facilitated by transient, nanoscale fluctuations that are extraordinarily difficult to observe. Here, we use high-speed atomic force microscopy to directly observe the growth of an aluminum hydroxide film from an aqueous solution and characterize the dynamically fluctuating nanostructures that precede its formation. Nanoscale cluster distributions and fluctuation dynamics show many similarities to the predictions of classical nucleation theory, but the cluster energy landscape deviates from classical expectations. Kinetic Monte Carlo simulations show that these deviations can arise from electrostatic interactions between the clusters and the underlying substrate, which drive microphase separation to create a nanostructured surface phase. This phase can evolve seamlessly from a low-coverage state of fluctuating clusters into a high-coverage nanostructured network, allowing the film to grow without having to overcome classical nucleation barriers.

36 MATERIALS SCIENCE↗

Interpreting the Operando XANES of Surface-Supported Subnanometer Clusters: When Fluxionality, Oxidation State, and Size Effect Fight.

X-ray absorption near edge structure (XANES) spectroscopy is widely used for operando catalyst characterization. We show that, for highly fluxional supported nanoclusters, the customary extraction of the oxidation state of the metal from the XANES data by fitting to the bulk standards is highly questionable. The XANES signatures as well as the apparent oxidation state for such clusters arise from a complex combination of many factors, and not only from the chemical composition in reaction conditions (e.g., oxygen content in oxidizing atmosphere). The thermally accessible isomerization and population of several structurally distinct cluster forms, cluster-support interaction, and intrinsic size effects all impact the metal oxidation state and XANES signal. We demonstrate this on copper oxide clusters with different compositions, Cu4Ox(x = 2-5) and Cu5Oy (y = 3, 5), deposited on amorphous alumina and ultrananocrystalline diamond, for which we computed the XANES spectra and compare the results to the experiment. We show in addition that fitting the experimental spectrum to calculated spectra of supported clusters can, in contrast, provide good agreement and insight into the spectrum-composition-structure relation. Experimental XANES interpreted using the proposed fitting scheme shows the partial reduction of Cu oxide clusters at rising temperatures, and pinpoints the specific stoichiometries that dominate in the ensemble of cluster states as the temperature changes.

Zandkarimi, Borna↗

The Cocytos Stream: A Disrupted Globular Cluster from our Last Major Merger?

The census of stellar streams and dwarf galaxies in the Milky Way provides direct constraints on galaxy formation models and the nature of dark matter. The DESI Milky Way survey (with a footprint of 14,000$~deg{^2}$ and a depth of $r<19$ mag) delivers the largest sample of distant metal-poor stars compared to previous optical fiber-fed spectroscopic surveys. This makes DESI an ideal survey to search for previously undetected streams and dwarf galaxies. We present a detailed characterization of the Cocytos stream, which was re-discovered using a clustering analysis with a catalog of giants in the DESI year 3 data, supplemented with Magellan/MagE spectroscopy. Our analysis reveals a relatively metal-rich ([Fe/H]$=-1.3$) and thick stream (width$=1.5^\circ$) at a heliocentric distance of $\approx 25$ kpc, with an internal velocity dispersion of 6.5-9 km s$^{-1}$. The stream's metallicity, radial orbit, and proximity to the Virgo stellar overdensities suggest that it is most likely a disrupted globular cluster that came in with the Gaia-Enceladus merger. We also confirm its association with the Pyxis globular cluster. Our result showcases the ability of wide-field spectroscopic surveys to kinematically discover faint disrupted dwarfs and clusters, enabling constraints on the dark matter distribution in the Milky Way.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonprecious Single Atom Catalyst for Methane Pyrolysis

The development of a suitable catalytic system for methane pyrolysis reactions requires a detailed investigation of the activation energy of C-H bonds on catalysts, as well as their stability against sintering and coke formation. In this work, both single-metal Ni atoms and small clusters of Ni atoms deposited on titanium nitride (TiN) plasmonic nanoparticles were characterized for the C-H bond activation of a methane pyrolysis reaction using ab initio spin-polarized density functional theory (DFT) calculations. The present work shows the complete reaction pathway, including energy barriers for C-H bond activation and dehydrogenated fragments, during the methane pyrolysis reaction on catalytic systems. Interestingly, the C-H bond activation barriers were low for both Ni single-atom and Ni-clusters, showing the energy barriers of ~1.10 eV and ~0.88 eV, respectively. Additionally, single-atom Ni-TiN showed weaker binding to adsorbates, and a net endothermic reaction pathway indicated that the single-atom Ni-TiN was expected to resist coke formation on its surface. However, these Ni single-atom catalysts can sinter, aggregate into a small cluster, and form a coke layer from the highly exothermic reaction pathway that the cluster takes despite the facile reaction pathway.

08 HYDROGEN↗

Unexpected Formation of Metallofulleroids from Multicomponent Reactions, with Crystallographic and Computational Studies of the Cluster Motion

Abstract New multicomponent reactions involving an isocyanide, terminal or internal alkynes, and endohedral metallofullerene (EMF) Lu 3 N@C 80 yield metallofulleroids which are characterized by mass‐spectrometry, HPLC, and multiple 1D and 2D NMR techniques. Single crystal studies revealed one ketenimine metallofulleroid has ordered Lu 3 N cluster which is unusual for EMF monoadducts. Computational analysis, based on crystallographic data, confirm that the endohedral cluster motion is controlled by the position of the exohedral organic appendants. Our findings provide a new functionalization reaction for EMFs, and a potential facile approach to freeze the endohedral cluster motion at relatively high temperatures.

Li, Yanbang↗

Structural characterization of an intrinsically disordered protein complex using integrated small-angle neutron scattering and computing

Characterizing structural ensembles of intrinsically disordered proteins (IDPs) and intrinsically disordered regions (IDRs) of proteins is essential for studying structure–function relationships. Due to the different neutron scattering lengths of hydrogen and deuterium, selective labeling and contrast matching in small-angle neutron scattering (SANS) becomes an effective tool to study dynamic structures of disordered systems. However, experimental timescales typically capture measurements averaged over multiple conformations, leaving complex SANS data for disentanglement. We hereby demonstrate an integrated method to elucidate the structural ensemble of a complex formed by two IDRs. We use data from both full contrast and contrast matching with residue-specific deuterium labeling SANS experiments, microsecond all-atom molecular dynamics (MD) simulations with four molecular mechanics force fields, and an autoencoder-based deep learning (DL) algorithm. From our combined approach, we show that selective deuteration provides additional information that helps characterize structural ensembles. We find that among the four force fields, a99SB-disp and CHARMM36m show the strongest agreement with SANS and NMR experiments. In addition, our DL algorithm not only complements conventional structural analysis methods but also successfully differentiates NMR and MD structures which are indistinguishable on the free energy surface. Finally, we present an ensemble that describes experimental SANS and NMR data better than MD ensembles generated by one single force field and reveal three clusters of distinct conformations. Our results demonstrate a new integrated approach for characterizing structural ensembles of IDPs.

59 BASIC BIOLOGICAL SCIENCES↗

Expression, purification, and characterization of diacylated Lipo-YcjN from Escherichia coli

YcjN is a putative substrate binding protein expressed from a cluster of genes involved in carbohydrate import and metabolism in Escherichia coli. Here, we determine the crystal structure of YcjN to a resolution of 1.95 Å, revealing that its three-dimensional structure is similar to substrate binding proteins in subcluster D-I, which includes the well-characterized maltose binding protein. Furthermore, we found that recombinant overexpression of YcjN results in the formation of a lipidated form of YcjN that is posttranslationally diacylated at cysteine 21. Comparisons of size-exclusion chromatography profiles and dynamic light scattering measurements of lipidated and nonlipidated YcjN proteins suggest that lipidated YcjN aggregates in solution via its lipid moiety. Additionally, bioinformatic analysis indicates that YcjN-like proteins may exist in both Bacteria and Archaea, potentially in both lipidated and nonlipidated forms. Together, our results provide a better understanding of the aggregation properties of recombinantly expressed bacterial lipoproteins in solution and establish a foundation for future studies that aim to elucidate the role of these proteins in bacterial physiology.

Escherichia coli↗

Characterizing the intracluster light over the redshift range 0.2 < z < 0.8 in the DES-ACT overlap

ABSTRACT We characterize the properties and evolution of bright central galaxies (BCGs) and the surrounding intracluster light (ICL) in galaxy clusters identified in the Dark Energy Survey and Atacama Cosmology Telescope Survey (DES-ACT) overlapping regions, covering the redshift range 0.20 < z < 0.80. Over this redshift range, we measure no change in the ICL’s stellar content (between 50 and 300 kpc) in clusters with log10(M200m,SZ/M⊙) >14.4. We also measure the stellar mass–halo mass (SMHM) relation for the BCG+ICL system and find that the slope, β, which characterizes the dependence of M200m,SZ on the BCG+ICL stellar mass, increases with radius. The outskirts are more strongly correlated with the halo than the core, which supports that the BCG+ICL system follows a two-phase growth, where recent growth (z < 2) occurs beyond the BCG’s core. Additionally, we compare our observed SMHM relation results to the IllustrisTNG300-1 cosmological hydrodynamic simulations and find moderate qualitative agreement in the amount of diffuse light. However, the SMHM relation’s slope is steeper in TNG300-1 and the intrinsic scatter is lower, likely from the absence of projection effects in TNG300-1. Additionally, we find that the ICL exhibits a colour gradient such that the outskirts are bluer than the core. Moreover, for the lower halo mass clusters (log10(M200m,SZ/M⊙) < 14.59), we detect a modest change in the colour gradient’s slope with lookback time, which combined with the absence of stellar mass growth may suggest that lower mass clusters have been involved in growth via tidal stripping more recently than their higher mass counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiscale spatial analysis of fracture arrangement and pattern reconstruction using Ripley's K-function

This work presents novel multiscale spatial data analytics using Ripley's K-function, as a measure of spatial interaction, to study one-dimensional arrangement of fractures. Fracture spatial arrangements are classified into clustered, anticlustered, or indistinguishable from random by testing statistical significance of the calculated Ripley's K-function. Characterizations of fracture arrangements are performed as a function of length scale and position. Analysis of the K-function along the study interval identifies where fracture clustering and anticlustering occur. Here, a simulation technique is also introduced here to statistically reconstruct spatial arrangements and to generate fracture realizations that are spatially similar to the fractures observed in the field. With this simulation technique, one can also fill spatial gaps in fracture measurements where data are absent, unreliable, or unused. Synthetic as well as field-measured 1D fracture datasets are used for testing and demonstration. Methods introduced in this work can be readily applied to fracture datasets observed in outcrops, borehole image logs, and cores.

58 GEOSCIENCES↗

Nucleon clustering at kinetic freezeout of heavy-ion collisions via path-integral Monte Carlo

Clustering of the four-nucleon system at kinetic freezeout conditions is studied using path-integral Monte Carlo techniques. This method seeks to improve upon previous calculations which relied on approximate semiclassical methods or few-body quantum mechanics. Estimates are given for the decay probabilities of the 4N system into various light nuclei decay channels and the strength of spatial correlations is characterized. Additionally, a simple model is presented to describe the impact of this clustering on nucleon multiplicity distributions. Additionally, the effects of a possible modification of the inter-nucleon interaction due to the close critical line (and hypothetical QCD critical point) on the clustering are also studied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isolating the Contributions of Specific Network Sites to the Diffuse Vibrational Spectrum of Interfacial Water with Isotopomer-Selective Spectroscopy of Cold Clusters

Decoding the structural information contained in the interfacial vibrational spectrum of water requires understanding how the spectral signatures of individual water molecules respond to their local hydrogen bonding environments. In this study, we isolated the contributions for the five classes of sites that differ according to the number of donor (D) and acceptor (A) hydrogen bonds that characterize each site. These patterns were measured by exploiting the unique properties of the water cluster cage structures formed in the gas phase upon hydration of a series of cations M+·(H2O)n (M = Li, Na, Cs, NH4, CH3NH3, H3O, and n = 5, 20-22). This selection of ions was chosen to systematically express the A, AD, AAD, ADD, and AADD hydrogen bonding motifs. The spectral signatures of each site were measured using two-color, IR-IR isotopomer-selective photofragmentation vibrational spectroscopy of the cryogenically cooled, mass selected cluster ions in which a single intact H2O is introduced without isotopic scrambling, an important advantage afforded by the cluster regime. The resulting patterns provide an unprecedented picture of the intrinsic line shapes and spectral complexities associated with excitation of the individual OH groups, as well as the correlation between the frequencies of the two OH groups on the same water molecule, as a function of network site. The properties of the surrounding water network that govern this frequency map are evaluated by dissecting electronic structure calculations that explore how changes in the nearby network structures, both within and beyond the first hydration shell, affect the local frequency of an OH oscillator. The qualitative trends are recovered with a simple model that correlates the OH frequency with the network-modulated local electron density in the center of the OH bond.

Yang, Nan↗

Biosystem design of Corynebacterium glutamicum for bioproduction

Corynebacterium glutamicum, a natural glutamate-producing bacterium adopted for industrial production of amino acids, has been extensively explored recently for high-level biosynthesis of amino acid derivatives, bulk chemicals such as organic acids and short-chain alcohols, aromatics, and natural products, including polyphenols and terpenoids. Here, we review the recent advances with a focus on biosystem design principles, metabolic characterization and modeling, omics analysis, utilization of nonmodel feedstock, emerging CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) tools for Corynebacterium strain engineering, biosensors, and novel strains of C. glutamicum. Further, future research directions for developing C. glutamicum cell factories are also discussed.

59 BASIC BIOLOGICAL SCIENCES↗

MoVN-Cu Coatings for In Situ Tribocatalytic Formation of Carbon-Rich Tribofilms in Low-Viscosity Fuels

Inhibiting the tribological failure of mechanical assemblies which rely on fuels for lubrication is an obstacle to maintaining the lifetime of these systems with low-viscosity and low-lubricity fuels. Here in the present study, a MoVN-Cu nanocomposite coating was tribologically evaluated for durability in high- and low-viscosity fuels as a function of temperature, load, and sliding velocity conditions. The results indicate that the MoVN-Cu coating is effective in decreasing wear and friction relative to an uncoated steel surface. Raman spectroscopy, transmission electron microscopy, and electron-dispersive spectroscopy analysis of the MoVN-Cu worn surfaces confirmed the presence of an amorphous carbon-rich tribofilm which provides easy shearing and low friction during sliding. Further, the characterization of the formed tribofilm revealed the presence of nanoscale copper clusters overlapping with the carbon peak intensities supporting the tribocatalytic origin of the surface protection. The tribological assessment of the MoVN-Cu coating reveals that the coefficient of friction decreased with increasing material wear and initial contact pressure. These findings suggest that MoVN-Cu is a promising protective coating for fuel-lubricated assemblies due to its adaptive ability to replenish lubricious tribofilms from hydrocarbon environments.

36 MATERIALS SCIENCE↗

Achieving Higher Activity of Acidic Oxygen Evolution Reaction Using an Atomically Thin Layer of IrO x over Co 3 O 4

The development of electrocatalysts with reduced iridium (Ir) loading for the oxygen evolution reaction (OER) is essential to produce low-cost green hydrogen from water electrolysis under acidic conditions. Herein, an atomically thin layer of iridium oxide (IrO x ) has been uniformly dispersed onto cobalt oxide (Co 3 O 4 ) nanocrystals to improve the efficient use of Ir for acidic OER. In situ characterization and theoretical calculations reveal that compared to the conventional IrOx cluster, the atomically thin layer of IrO x shows stronger interaction with the Co 3 O 4 and consequently higher OER activity due to the Ir-O-Co bond formation at the interface. Equally important, the facile synthetic method and the promising activity in the proton exchange membrane water electrolyzer, reaching 1 A cm -2 at 1.7 V with remarkable durability, enable potential scale-up applications. In conclusion, these findings provide a mechanistic understanding for designing active, stable and lower-cost electrocatalysts with well-defined structures for acidic OER.

58 GEOSCIENCES↗

Controlling Reaction Pathways of Ethylene Hydroformylation Using Isolated Bimetallic Rhodium–Cobalt Sites

Designing efficient ligand-free heterogeneous catalysts for ethylene hydroformylation to produce C 3 oxygenates is of importance for both fundamental research and practical applications, but it is often hindered by insufficient catalytic activity and selectivity. Here, this work designs isolated rhodium–cobalt (Rh–Co) sites confined within a ZSM-5 zeolite to enhance ethylene hydroformylation rates and selectivity while maintaining catalyst stability. By adjusting the Co/Al ratio in Co-ZSM-5, different sizes of Co are formed; subsequent Rh introduction produces isolated Rh 1 Co x clusters with different Rh–Co coordination numbers (CNs). In-situ characterizations and density functional theory calculations reveal that a Rh–Co CN of 3, corresponding to an isolated Rh 1 Co 3 site, provides optimal bindings to reaction intermediates and thus achieves the highest hydroformylation rates among supported Rh-based catalysts. This study demonstrates the role of coordination-tuning via a secondary metal in effectively controlling the reaction pathway over single Rh atom catalysts.

03 NATURAL GAS↗

High-accuracy first-principles-based rate coefficients for the reaction of OH and CH 3 OOH

Here, the ˙OH-initiated oxidation of methyl hydroperoxide, which plays an important role in the atmospheric chemistry of methane, was theoretically characterized using high-accuracy composite amHEAT-345(Q) coupled-cluster calculations followed by a two-dimensional E,J resolved master equation analysis. The reaction is found to proceed through two distinct hydrogen-bonded pre-reactive complexes leading to two product channels, in accord with the experimental observations: (i) ˙OH + CH 3 OOH → CH 3 OO˙ + H 2 O with a yield of 0.8 ± 0.1, and (ii) ˙OH + CH 3 OOH → HCHO + ˙OH + H 2 O with a yield of 0.2 ± 0.1. The calculated reaction enthalpies are within 0.2 kcal mol -1 of the benchmark ATcT values. Overall thermal rate coefficients obtained from first principles are found to be in the low-pressure limit at atmospheric pressure; the total rate coefficient can be expressed over the T = 200–450 K range as k(T) = 5.0 × 10 -12 × T -0.152 × exp(287/T) cm 3 s -1 , strongly supporting the experimental results of Vaghjiani and Ravishankara, with which this expression agrees within ca. 15%. The current results show that (i) is the principal reaction channel and support the view that, due to its inherently fast transformations, CH 3 OOH is an important redistribution species for HO x ˙ radicals in the Earth's atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗