Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “characteristic equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

On the normal modes of Laplace's tidal equations for zonal wavenumber zero

The characteristic differences between two different rotational modes of Laplace's tidal equations for wavenumber m = 0, called the K- and the S-modes, are compared in their energy ratio and structures. It is shown that the K-mode representation captures most of the observed zonal energy with a few terms, whereas the S-mode representation requires many terms. For small vertical scale components, the K-mode series converges faster than the S-mode series. Attention is also given to the differences between the energy spectra projected upon the K- and S-modes and the merits of each set as expansion functions for the zonal atmospheric motions.

Tanaka, H. L.↗
NASA NTRS1980

An implicit finite-difference code for inviscid and viscous cascade flow

An implicit finite-difference code is developed to solve either inviscid or viscous flow about two-dimensional cascade blade elements. General coordinate transformations are used so that boundaries can coincide with coordinate lines, and an automatic grid generation routine based on elliptic partial differential equations is employed to mesh arbitrary cascade elements. Characteristic combinations of the differential equations are used at inflow and outflow boundaries. Computed results for both inviscid and viscous flow are compared with other existing cascade solutions and experimental data.

Steger, J. L.↗
NASA NTRS1972

Solution of non-isoenergetic supersonic flows by method of characteristics, volume 3

The calculation of supersonic flow fields by the method of characteristics. The theoretical approach to the solution of these flow fields and a computer program to implement the numerical solution of the flow equations are discussed. This versatile program has a flexible set of boundary conditions enabling the calculation of nozzles, plumes and many other complex flow fields. A complete derivation of the equations of motion for reacting gas systems is presented. An important consequence of this derivation is that, for the reaction assumptions which were made, the thermochemistry was shown to be uncoupled from the flow solution and as such could be solved separately. The methods of characteristics equations are shown to be formally the same for ideal, frozen, and equilibrium reacting gas mixtures.

Prozan, R. J.↗
NASA NTRS1939

Design charts for predicting downwash angles and wake characteristics behind plain and flapped wings

Equations and design charts are given for predicting the downwash angles and the wake characteristics for power-off conditions behind plain and flapped wings of the types used in modern design practice. The downwash charts cover the cases of elliptical wings and wings of taper ratios 1, 2, 3, and 5, with aspect ratios of 6, 9, and 12, having flaps covering 0, 40, 70, and 100 percent of the span. Curves of the span load distributions for all these cases are included. Data on the lift and the drag of flapped airfoil sections and curves for finding the contribution of the flap to the total wing lift for different types of flap and for the entire range of flap spans are also included. The wake width and the distribution of dynamic pressure across the wake are given in terms of the profile-drag coefficient and the distance behind the wing. A method of estimating the wake position is also given. The equations and charts are based on theory that has been shown in a previous report to be in agreement with experiment.

Silverstein, Abe↗
NASA NTRS1987

A computational code for two-dimensional unsteady magnetohydrodynamics by the method of characteristics

A computational code for solving two-dimensional, time-dependent MHD equations by the method of characteristics is presented. Its capabilities are demonstrated by solving two very different problems for which analytical solutions exist: linearized, standing MHD wave motions in a magnetized cylindrical plasma, and nonlinear self-similar expansion of a magnetized plasma ball. The nonlinear development of standing MHD wave solutions in a cylindrical plasma is also studied. The method can be naturally embedded in the computational architecture of massively parallel processors.

Lou, Y. Q.↗
NASA NTRS1984

Vibration of a hydrostatic gas bearing due to supply pressure oscillations

The vibration of a statically loaded, inherently compensated hydrostatic journal bearing due to oscillating supply pressure is investigated. Both angular and radial vibration modes are analyzed. The time-dependent Reynolds equation governing the pressure distribution between the oscillating journal and the sleeve is solved numerically together with the journal equation of motion to obtain the response characteristics of the bearing. The Reynolds equation and the equation of motion are simplified by applying regular perturbation theory for small displacements. The results presented include Bode plots of bearing oscillation gain and phase for a particular bearing configuration for various combinations of parameters over a range of frequencies, including the resonant frequency. The results are compared with the results of an earlier study involving the response of a similar bearing to oscillating exhaust pressure.

Branch, H. D.↗
NASA NTRS1989

Design of optimally smoothing multi-stage schemes for the Euler equations

In this paper, a method is developed for designing multi-stage schemes that give optimal damping of high-frequencies for a given spatial-differencing operator. The objective of the method is to design schemes that combine well with multi-grid acceleration. The schemes are tested on a nonlinear scalar equation, and compared to Runge-Kutta schemes with the maximum stable time-step. The optimally smoothing schemes perform better than the Runge-Kutta schemes, even on a single grid. The analysis is extended to the Euler equations in one space-dimension by use of 'characteristic time-stepping', which preconditions the equations, removing stiffness due to variations among characteristic speeds. Convergence rates independent of the number of cells in the finest grid are achieved for transonic flow with and without a shock. Characteristic time-stepping is shown to be preferable to local time-stepping, although use of the optimally damping schemes appears to enhance the performance of local time-stepping. The extension of the analysis to the two-dimensional Euler equations is hampered by the lack of a model for characteristic time-stepping in two dimensions. Some results for local time-stepping are presented.

Van Leer, Bram↗
NASA NTRS1986

A relaxation technique for the parabolized Navier-Stokes (PNS) equations

A rapidly converging relaxation technique for the parabolized Navier-Stokes equations has been devised. The scheme is applicable in both supersonic and subsonic flows, but it is discussed here in the context of supersonic flows. The upstream propagating acoustic influence in the subsonic part of the flow is introduced semi-implicitly through the streamwise momentum equation applied on the body, and through a forward-differencing on the streamwise pressure gradient term in the interior. This procedure yields a new boundary condition on the energy in the total energy equation. The pressure-velocity system in the subsonic layer is coupled, but the positive time-like marching characteristic of the governing equations is still maintained. The relaxation technique is demontrated to work for a three-dimensional flow over a cone-flare in supersonic flight.

Kaul, Upender K.↗
NASA NTRS1974

The response of many-storied structures under seismic actions

A seismic action which is characterized by the acceleration function of the seismic motion is analyzed. The equations of motion in the direction of the seismic action are determined for a completely rigid ground and for a ground with linear deformability characteristics (rotation deformability). The equation for the rotation motion is derived by considering elastic and viscoelastic properties of the foundation ground. The differential equations are written by treating the mechanical model of a many-storied structure as a fixed vertical beam with a uniformly distributed mass as well as with concentrated masses on each floor.

Munteanu, K.↗
NASA NTRS1983

Application of the method of lines for solutions of the Navier-Stokes equations using a nonuniform grid distribution

The feasibility of the method of lines for solutions of physical problems requiring nonuniform grid distributions is investigated. To attain this, it is also necessary to investigate the stiffness characteristics of the pertinent equations. For specific applications, the governing equations considered are those for viscous, incompressible, two dimensional and axisymmetric flows. These equations are transformed from the physical domain having a variable mesh to a computational domain with a uniform mesh. The two governing partial differential equations are the vorticity and stream function equations. The method of lines is used to solve the vorticity equation and the successive over relaxation technique is used to solve the stream function equation. The method is applied to three laminar flow problems: the flow in ducts, curved-wall diffusers, and a driven cavity. Results obtained for different flow conditions are in good agreement with available analytical and numerical solutions. The viability and validity of the method of lines are demonstrated by its application to Navier-Stokes equations in the physical domain having a variable mesh.

Abolhassani, J. S.↗
NASA NTRS1986

Numerical solutions of the complete Navier-Stokes equations

Using ideas from the kinetic theory, the Navier-Stokes equations are modified in such a way that they can be cast as a set of first order hyperbolic equations. This is achieved by incorporating time dependent terms into the definition of the stress tensor and the heat flux vectors. The boundary conditions are then determined from the theory of characteristics. Because the resulting equations reduce to the traditional Navier-Stokes equations when the steady state is reached, the present approach provides a straightforward scheme for the determination of inflow and outflow boundary conditions. The method is validated by comparing its predictions with known exact solutions of the steady Navier-Stokes equations.

Hassan, H. A.↗
NASA NTRS1987

Boundary conditions for the Navier-Stokes equations

Using ideas from kinetic theory, the Navier-Stokes equations are modified in such a way that they can be cast as a set of first order hyperbolic equations. This is achieved by incorporating time dependent terms into the definition of the stress tensor and the heat flux vectors. The boundary conditions are then determined from the theory of characteristics. Because the resulting equations reduce to the traditional Navier-Stokes equations when the steady state is reached, the present approach provides a straightforward scheme for the determination of inflow and outflow boundary conditions. The method is validated by comparing its predictions with exact and numerical solutions of the steady Navier-Stokes equations.

Rudisill, Edgar N., Jr.↗
DOE OSTI2024

A Characteristics Approach to the Finite Element Method

Herein, we present a new method for solving the linear Boltzmann transport equation. Two commonly used and well-understood methods for solving partial differential equations are the method of characteristics (MOC) and the finite element method (FEM). We propose a new method that combines the fundamental concept of the FEM with the analytic solution from the MOC to obtain coefficients for the FEM basis function expansion. Traditionally, coefficients for the FEM basis function expansion are obtained via matrix inversion. Instead, we solve for the coefficients with the MOC and represent the underlying fields with the basis function expansion using these coefficients. We provide a convergence study for our method with results from two sets of FEM basis functions: Gauss-Legendre and Gauss-Lobatto sets. We also compare two different variations of our method categorized as short characteristics and intermediate characteristics.

42 ENGINEERING↗
NASA NTRS1992

Runge-Kutta methods combined with compact difference schemes for the unsteady Euler equations

Recent development using compact difference schemes to solve the Navier-Stokes equations show spectral-like accuracy. A study was made of the numerical characteristics of various combinations of the Runge-Kutta (RK) methods and compact difference schemes to calculate the unsteady Euler equations. The accuracy of finite difference schemes is assessed based on the evaluations of dissipative error. The objectives are reducing the numerical damping and, at the same time, preserving numerical stability. While this approach has tremendous success solving steady flows, numerical characteristics of unsteady calculations remain largely unclear. For unsteady flows, in addition to the dissipative errors, phase velocity and harmonic content of the numerical results are of concern. As a result of the discretization procedure, the simulated unsteady flow motions actually propagate in a dispersive numerical medium. Consequently, the dispersion characteristics of the numerical schemes which relate the phase velocity and wave number may greatly impact the numerical accuracy. The aim is to assess the numerical accuracy of the simulated results. To this end, the Fourier analysis is to provide the dispersive correlations of various numerical schemes. First, a detailed investigation of the existing RK methods is carried out. A generalized form of an N-step RK method is derived. With this generalized form, the criteria are derived for the three and four-step RK methods to be third and fourth-order time accurate for the non-linear equations, e.g., flow equations. These criteria are then applied to commonly used RK methods such as Jameson's 3-step and 4-step schemes and Wray's algorithm to identify the accuracy of the methods. For the spatial discretization, compact difference schemes are presented. The schemes are formulated in the operator-type to render themselves suitable for the Fourier analyses. The performance of the numerical methods is shown by numerical examples. These examples are detailed. described. The third case is a two-dimensional simulation of a Lamb vortex in an uniform flow. This calculation provides a realistic assessment of various finite difference schemes in terms of the conservation of the vortex strength and the harmonic content after travelling a substantial distance. The numerical implementation of Giles' non-refelctive equations coupled with the characteristic equations as the boundary condition is discussed in detail. Finally, the single vortex calculation is extended to simulate vortex pairing. For the distance between two vortices less than a threshold value, numerical results show crisp resolution of the vortex merging.

Yu, Sheng-Tao↗
NASA NTRS2016

Unique Results and Lessons Learned from the TSS Missions

In 1924, Irvin Langmuir and H. M. Mott-Smith published a theoretical model for the complex plasma sheath phenomenon in which they identified some very special cases which greatly simplified the sheath and allowed a closed solution to the problem. The most widely used application is for an electrostatic, or "Langmuir," probe in laboratory plasma. Although the Langmuir probe is physically simple (a biased wire) the theory describing its functional behavior and its current-voltage characteristic is extremely complex and, accordingly, a number of assumptions and approximations are used in the LMS model. These simplifications, correspondingly, place limits on the model's range of application. Adapting the LMS model to real-life conditions is the subject of numerous papers and dissertations. The Orbit-Motion Limited (OML) model that is widely used today is one of these adaptions that is a convenient means of calculating sheath effects. The OML equation for electron current collection by a positively biased body is simply: I is approximately equal to A x j(sub eo) x 2/√𝜋(phi)(exp ½) where A is the area of the body and phi is the electric potential on the body with respect to the plasma. Since the Langmuir probe is a simple biased wire immersed in plasma, it is particularly tempting to use the OML equation in calculating the characteristics of the long, highly biased wires of an Electric Sail in the solar wind plasma. However, in order to arrive at the OML equation, a number of additional simplifying assumptions and approximations (beyond those made by Langmuir-Mott-Smith) are necessary. The OML equation is a good approximation when all conditions are met, but it would appear that the Electric Sail problem lies outside of the limits of applicability.

Stone, Nobie H.↗