SEARCH · Engineering Papers

Results for “cavity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Modeling the Rapid Boil-Off of a Cryogenic Liquid When Injected into a Low Pressure Cavity

Many launch vehicle cryogenic applications require the modeling of injecting a cryogenic liquid into a low pressure cavity. The difficulty of such analyses lies in accurately predicting the heat transfer coefficient between the cold liquid and a warm wall in a low pressure environment. The heat transfer coefficient and the behavior of the liquid is highly dependent on the mass flow rate into the cavity, the cavity wall temperature and the cavity volume. Testing was performed to correlate the modeling performed using Thermal Desktop and Sinda Fluint Thermal and Fluids Analysis Software. This presentation shall describe a methodology to model the cryogenic process using Sinda Fluint, a description of the cryogenic test set up, a description of the test procedure and how the model was correlated to match the test results.

Fluid Mechanics↗

NASA NTRS1994

(abstract) Vibration Method for Tracking the Resonant Mode and Impedance of a Microwave Cavity

We have developed a vibration technique to continuously maintain mode resonance and impedance match between a constant frequency magnetron source and resonant cavity. This method uses a vibrating metal rod to modulate the volume of the cavity that is equivalent to modulating an adjustable plunger. A similar vibrating metal rod attached to a stub tuner modulates the waveguide volume between the source and cavity. A phase sensitive detection scheme determines the optimum position of the adjustable plunger and stub tuner. The improved power transfer during the heating of a 99.8% pure alumina rod was demonstrated using this new technique. Temperature-time and reflected power-time plotswill be presented for the cases of no tracking, impedance tracker only, mode tracker only, and simultaneous impedance and mode tracking. Internal melting of the alumina rod near 2000°C with both trackers on will also be discussed.

microwave↗

NASA NTRS1973

Preliminary neutronic analysis of a cavity test reactor

A reference configuration was calculated for a cavity test reactor to be used for testing the gascore nuclear rocket concept. A thermal flux of 4.1 x 10 to the 14th power neutrons per square centimeter per second in the cavity was provided by a driver fuel loading of 6.4 kg of enriched uranium in MTR fuel elements. The reactor was moderated and cooled by heavy water and reflected with 25.4 cm of beryllium. Power generation of 41.3 MW in the driver fuel is rejected to a heat sink. Design effort was directed toward minimization of driver power while maintaining 2.7 MW in the cavity during a test run. Ancillary data on material reactivity worths, reactivity coefficients, flux spectra, and power distributions are reported.

Whitmarsh, C. L., Jr.↗

NASA NTRS1973

Lunar electromagnetic scattering. I - Propagation parallel to the diamagnetic cavity axis.

A general analytic solution is obtained for the interaction of the moon and its downstream cavity with a linearly polarized plane electromagnetic wave propagating parallel to the cavity axis. The solution is formulated in terms of a spherical moon model with arbitrary radially dependent electromagnetic parameters and a nonconducting cylindrical downstream cavity. Use is made of a number of approximations that are consistent with the physical nature of the interaction between the moon and the solar wind.

Schwartz, K.↗

NASA NTRS1973

Tunable cavity resonator with ramp shaped supports

A cavity for a hydrogen maser is described consisting of three parts which provide highly stable mechanical and thermal expansion characteristics for the cavity and ease of tuning. The three parts which are made of a glass ceramic material having a very small thermal expansion coefficient (1) a top plate, (2) a cylinder with three interrupted helical ramps at its bottom, and (3) a base which includes a bottom plate and three ramp lugs on which the helical ramps of the cylinder rest when the cylinder is placed on the base with the bottom plate in the cylinder. Cavity tuning is achieved by rotating the cylinder and thereby raising or lowering it on the base, which results in changing the cylinder volume by changing the distance between the bottom and top plates.

Vessot, R. F. C.↗

NASA NTRS1974

Analysis of combustion instability in liquid propellant engines with or without acoustic cavities

Analytical studies have been made of the relative combustion stability of various propellant combinations when used with hardware configurations representative of current design practices and with or without acoustic cavities. Two combustion instability models, a Priem-type model and a modification of the Northern Research and Engineering (NREC) instability model, were used to predict the variation in engine stability with changes in operating conditions, hardware characteristics or propellant combination, exclusive of acoustic cavity effects. The NREC model was developed for turbojet engines but is applicable to liquid propellant engines. A steady-state combustion model was used to predict the needed input for the instability models. In addition, preliminary development was completed on a new model to predict the influence of an acoustic cavity with specific allowance for the effects the nozzle, steady flow and combustion.

Oberg, C. L.↗

NASA NTRS1973

Cavity tuning and light-shift in the Rb-87 maser

A new method for tuning the cavity of the Rb-87 maser is proposed. It is based on the existence of a cavity tuning for which the maser frequency is independent on the light intensity. The features of this method are evaluated theoretically and tested experimentally. Preliminary results obtained by using a closed loop feedback electronic system for tuning the cavity are given.

Busca, G.↗

NASA NTRS1975

The effect of gas diffusion on the flow coefficient for a ventilated cavity

The results of an experimental investigation into the effect of gas diffusion on the volume flow-rate of gas needed to sustain a ventilated cavity are presented. Gas diffusion was found to have a significant effect on the ventilated flow rate required to sustain a cavity of a given size. An analysis for the gas diffusion effect was conducted based on a mathematical model of diffusion proposed by Brennen. The results compare favorably with experimental data. Also, an empirical scaling relationship is proposed for ventilated cavity flows.

Billet, M. L.↗

NASA NTRS1976

A vortex model of cavity flow

The paper presents a model of two-dimensional cavity flow in which the shear layer over the cavity is represented by discrete rectilinear vortices which are free to move as the flow progresses. Although the model is initially started impulsively, the computation is continued until a statistically steady flow is attained. The broadband noise generation of the cavity is calculated by first running the model until the steady state is reached and then computing a stationary record of far-field density fluctuation through an equation that is suitable for calculating the quadrupole noise generation by the model. The discrete time series obtained can be analyzed by ordinary digital spectral techniques to determine the spectra and overall levels of the noise in airframe noise testing of real aircraft.

Hardin, J. C.↗

NASA NTRS1976

Noise response of cavities of varying dimensions at subsonic speeds

An expression for the Strouhal number of lengthwise cavity oscillations is obtained which includes the effect of length-to-depth ratio. This expression, which agrees well with the experimental data, is also used to predict the Mach number at which cavity acoustic response is maximum. Interaction between lengthwise and depthwise modes is seen to occur at Mach numbers from 0.1 to 0.5. Cavity shape is shown to affect the noise spectra in generating either a broadband or narrowband signal.

Block, P. J. W.↗

NASA NTRS1977

Measurements of the tonal component of cavity noise and comparison with theory

The frequency of the tonal noise generated by a flow-excited rectangular cavity was measured using Mach numbers ranging from 0.05 to 0.40, and cavity length-to-depth ratios varying from 0.1 to 8. The data are used to evaluate a current prediction method, and good agreement is shown. Measurements of the minimum streamwise cavity length required for oscillation were also made.

Block, P. J. W.↗

NASA NTRS1976

Mini-cavity plasma core reactors for dual-mode space nuclear power/propulsion systems

A mini-cavity plasma core reactor is investigated for potential use in a dual-mode space power and propulsion system. In the propulsive mode, hydrogen propellant is injected radially inward through the reactor solid regions and into the cavity. The propellant is heated by both solid driver fuel elements surrounding the cavity and uranium plasma before it is exhausted out the nozzle. The propellant only removes a fraction of the driver power, the remainder is transferred by a coolant fluid to a power conversion system, which incorporates a radiator for heat rejection. Neutronic feasibility of dual mode operation and smaller reactor sizes than those previously investigated are shown to be possible. A heat transfer analysis of one such reactor shows that the dual-mode concept is applicable when power generation mode thermal power levels are within the same order of magnitude as direct thrust mode thermal power levels.

Chow, S.↗

NASA NTRS1978

A research program to reduce interior noise in general aviation airplanes: Noise reduction through a cavity-backed flexible plate

A prediction method is reported for noise reduction through a cavity-backed panel. The analysis takes into account only cavity modes in one direction. The results of this analysis were to find the effect of acoustic stiffness of a backing cavity on the panel behavior. The resulting changes in the noise reduction through the panel are significant.

Roskam, J.↗

NASA NTRS1979

Evaluation of a vortex model of turbulent cavity flow

A two dimensional discrete vortex model is applied to turbulent flow over a cavity at a Reynolds number based on cavity half length of approximately 500,000. These model predictions are compared with experimental data on a time average and on a spectral basis. The comparisons indicate that the vortex model reproduces the mean velocity profiles of this complex flow, while the turbulent intensity and Reynolds stress profiles are overpredicted in magnitude. Spectral analyses show that the vortex model introduces unrealistic low frequency power which becomes less dominant as the model becomes more disordered. The spectral power distribution of the model in this state is nearly in agreement with that of the data, somewhat too low at the higher frequencies and too high at the lower frequencies. The model is shown to be capable of reproducing the cavity feedback oscillation phenomenon.

Hardin, J. C.↗

NASA NTRS1979

The influence of grazing flow on the acoustic impedance of a cylindrical wall cavity

The acoustic impedance at low frequencies of a circular cylindrical cavity in the wall of a duct in the presence of a low Mach number mean flow is examined. A linearized theoretical model is proposed which involves the unsteady shedding of vorticity from the upstream edge of the cavity aperture. The shed vorticity causes a 'potential difference' to be established across the aperture which modifies the reciprocating volume flux and results in the dissipation of acoustic energy. Comparison of theoretical predictions with preliminary experimental data obtained by Parrott (1978) provides tentative support for the present analysis. Certain difficulties associated with the linearized treatment of cavity oscillations are also discussed.

Howe, M. S.↗

NASA NTRS1980

Active cavity radiometer type V

The paper deals with a new type of cavity sensor geometry used in the most recent of a series of solar flux pyrheliometers, known as the active cavity radiometer (ACR). The new Type V sensor design incorporates a modification of its predecessor, the ACR IV sensor. This modification decreases the uncertainty within which cavity absorptance can be predicted by more than a factor of 10.

Willson, R. C.↗

NASA NTRS1981

Fermi-Compton scattering due to magnetopause surface fluctuations in Jupiter's magnetospheric cavity

The effects of boundary surface fluctuations on a spectrum of electromagnetic radiation trapped in a high Q (quality) cavity are considered. Undulating walls introduce small frequency shifts at reflection to the radiation, and it is argued that the process is entirely analogous to both Fermi (particle) acceleration and inverse Compton scattering. A Fokker-Planck formalism is pursued; it yields a diffusion equation in frequency for which the Green's function and steady-state solutions are found. Applying this analysis to the Jovian continuum radiation discovered by Voyager spacecraft, it is suggested that characteristic diffusion times are greater than 1 year, and that in order to account for the steep frequency spectra observed, an unidentified loss mechanism must operate in the cavity with a decay time constant approximately equal to the characteristic diffusion time divided by 28. A radiator-reactor model of the cavity is investigated to provide an estimate for the intrinsic luminosity of the low frequency (approximately 100 Hz) continuum source whose power is approximately 7 x 10 to the 6th W.

Barbosa, D. D.↗

NASA NTRS1981

Flow separation in shear-layer-driven cavities

A study of the shear-layer flow over a range of open-top cavity configurations is reported. Emphasis is placed on the effect that altering the cavity's span length and aspect ratio has on the development of the shear layer. Computational results are obtained using an interactive method which adapts the compressible boundary-layer model for the flow above the cavity and incompressible Navier-Stokes equations within the enclosure. Interaction of this composite model with the outer, inviscid supersonic flow is also considered in one case. The results show that the location of the stagnation points is sensitive primarily to the variation of the span. When the span was fixed and the aspect ratio varied, the shear layer was nearly unaffected except at aspect ratios less than 0.5. Interaction with the outer flow had a smoothing effect on the shape of the dividing streamline but did not significantly affect the location of the stagnation points.

Brandeis, J.↗