Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalytic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Oxygen evolution reaction over catalytic single-site Co in a well-defined brookite TiO 2 nanorod surface

Efficient electrocatalysts for the oxygen evolution reaction (OER) are paramount to the development of electrochemical devices for clean energy and fuel conversion. However, the structural complexity of heterogeneous electrocatalysts makes it a great challenge to elucidate the surface catalytic sites and OER mechanisms. Here, we report that catalytic single-site Co in a well-defined brookite TiO 2 nanorod (210) surface (Co-TiO 2 ) presents turnover frequencies that are among the highest for Co-based heterogeneous catalysts reported to date, reaching 6.6 ± 1.2 and 181.4 ± 28 s -1 at 300 and 400 mV overpotentials, respectively. Based on grand canonical quantum mechanics calculations and the single-site Co atomic structure validated by in situ and ex situ spectroscopic probes, we have established a full description of the catalytic reaction kinetics for Co-TiO 2 as a function of applied potential, revealing an adsorbate evolution mechanism for the OER. The computationally predicted Tafel slope and turnover frequencies exhibit exceedingly good agreement with experiment.

25 ENERGY STORAGE↗
DOE OSTI2021

High-efficiency catalytic reduction of residual oxygen for purification of carbon dioxide streams from high-pressure oxy-combustion systems

Pressurized oxy-combustion is a promising technology for carbon capture, utilization, and storage. For the captured CO 2 to be used for enhanced oil recovery or stored in geological formations, flue gas impurities, including residual O 2 in the CO 2 stream, must be purified to meet the purity specifications. A catalytic approach to reducing residual O 2 with CH 4 was investigated in this study. Five CoMn- and Cu-based catalysts were synthesized or acquired, and a reverse-flow fixed-bed reactor was used to assess their performance for O 2 removal from a simulated oxy-combustion flue gas at 15 bar. The impacts of the operating parameters on O 2 removal, such as temperature, gas hourly space velocity, O 2 /CH 4 ratio, and gas pressure, were investigated. Among the tested catalysts, the two CoMn catalysts were superior in both activity and selectivity, with the reaction lighting off at about 350 °C and achieving 99% O 2 removal at about 500 °C. Finally, the kinetics of the catalytic reaction is discussed, and the Mars–van Krevelen redox mechanism is deemed valid for describing the reaction pathway for the top-performing CoMn catalysts. The catalytic reaction was determined to be first order in CH 4 and zero order in O 2 under the test conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomically dispersed Ag on δ-MnO 2 via cation vacancy trapping for toluene catalytic oxidation

The regulation of metal–support interaction (MSI) and the improvement of noble metal utilization are the frontiers of volatile organic compound (VOC) catalytic oxidation. Here, we report a H 2 O 2 -assisted synthesis process for trapping Ag + onto the engineered Mn vacancies of δ-MnO 2 for the catalytic oxidation of toluene. Due to the strong MSI between Ag and δ-MnO 2 , the monoatomic Ag + anchored on cation vacancies forms longer and weakened Ag–O bonds compared with Ag 2 O, which can extra promote the formation of oxygen vacancies and the activation of adjacent lattice oxygen in Ag–O–Mn units compared with regular nanoparticle counterparts. It is beneficial to the steps of methyl dehydrogenation, demethylation, and benzene ring cleavage. The catalyst yields excellent toluene oxidation activity, enhanced turnover frequency in terms of Ag, and good stability. Finally, we propose in this study a facile design strategy for fabricating stably atomically dispersed metal sites, as well as clarify the structure–activity relationships during toluene catalytic oxidation, especially the important effect of single-atom Ag on the adjacent local structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Design of supported organocatalysts from a biomass-derived difuran compound and catalytic assessment for lactose hydrolysis

The engineered structures and active sites of enzyme catalysts give rise to high catalytic activity and selectivity toward desired reactions. We have employed a biomass-derived difuran compound to append N-substituted maleimides with amino acid (glutamic acid) substitution by Diels–Alder reaction to mimic the chemical functional groups that comprise the active site channels in enzyme catalysts. The difunctionality of the biomass-derived difuran allows production of Diels–Alder adducts by appending two amino acid moieties to form a difunctional organocatalyst. The catalytic activity of the organocatalyst can be improved by immobilizing the organocatalyst on solid supporting materials. Accordingly, the structures of these immobilized organocatalysts can be engineered to mimic enzymatic active sites and to control the interaction between reactants, products, and transition states of catalytic reactions. Lactose hydrolysis was carried out to provide an example of industrial application of this approach to design and fabricate new supported organocatalysts as artificial enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The NO reduction by CO over NiO x /CeO 2 catalysts with a fixed Ni surface density: pretreatment effects on the catalyst structure and catalytic activity

NiO x /CeO 2 catalysts have shown promising results in various catalytic reactions, including the NO reduction by CO. Here, in this study, we investigated the effect of oxidation and reduction treatments on the NO reduction by CO over pretreated NiO x /CeO 2 catalysts. A series of oxidized and reduced supported NiO x catalysts were synthesized in two steps: (1) the pretreatment of CeO 2 supports at different temperatures (400, 500, and 700 °C) under oxidizing and reducing conditions and (2) the synthesis of NiO x /CeO 2 catalysts by an incipient wetness impregnation method (IWI) with a fixed surface density of 5.3 Ni per nm 2 under specific conditions (oxidation/reduction) applied during the CeO 2 treatment. The prepared catalysts were characterized via BET, ICP/OES, Raman, XPS, and XRD to understand their physicochemical properties. The results showed that as the pretreatment temperature increased, the physicochemical properties of NiO x /CeO 2 catalysts were changed: a decreased specific surface area (SSA), decreased oxygen vacancy/defect sites, and an increased crystallite size. The oxidized NiO x /CeO 2 catalyst at a lower pretreatment temperature displayed a better catalytic activity, indicating that the physicochemical properties of the catalysts were key factors in enhancing the catalytic activity. To understand the intermediate species and reaction mechanism during the NO reduction by CO, an in situ DRIFTS study was performed and a possible reaction mechanism was also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of functional additives, fillers, and pigments on thermal and catalytic pyrolysis of polyethylene for waste plastic upcycling

Pyrolysis offers a relatively green and economical method to convert waste plastics into valuable chemicals and fuels without the need for harmful solvents, toxic chemicals, or costly high-pressure reactors. Despite its popularity among chemical upcycling technologies, industrial adoption suffers from feedstock heterogeneity, low-quality products, and catalyst deactivation. Most plastics in our daily lives are formulated with functional additives, fillers, and colorants. These additives remaining in end-of-life waste streams increase feedstock heterogeneity, creating a challenging issue in recycling plastics. Still, the potential impacts of additives on the chemical upcycling of plastics have been poorly understood. In this study, polyethylene compounded with a range of widely used additives (antioxidants, stabilizers, pigments, fillers, slip agents, and flame retardants) was subjected to both thermal pyrolysis and catalytic pyrolysis in different catalyst-to-feedstock contact modes. It showed that many inorganic additives, such as talc, kaolin, CaCO 3 , TiO 2 , carbon black, and zinc stearate, facilitated polymer decomposition during pyrolysis, increasing light hydrocarbons while also promoting aromatic and carbon residue formation. Conversely, antioxidants and stabilizers inhibited depolymerization, favoring heavier hydrocarbons. During catalytic pyrolysis with HZSM-5 zeolite, additives strongly enhanced aromatic and catalytic coke formation, especially when there was direct contact between plastics and catalysts. Although certain additives seem beneficial in the short term by promoting polymer cracking and improving the selectivity of aromatics, the transport of the additives and their degradation products and increased carbon coking can contaminate products, deactivate or modify catalysts, and foul reactors. These findings address a critical knowledge gap in effectively converting waste plastics via a greener route.

42 ENGINEERING↗
DOE OSTI2025

Proton transfer during reduction of the catalytic metallo-cofactors of the three nitrogenase isozymes

Nitrogenase catalyzes biological nitrogen fixation, the conversion of atmospheric N 2 into bioavailable ammonia. The three nitrogenase isozymes—Mo-nitrogenase, V-nitrogenase, and Fe-nitrogenase—utilize catalytic cofactors distinguished by their metal composition (Fe 7 M, M = Mo, V, or Fe; denoted FeM-co). Their catalytic cycles involve stepwise addition of 8[e−/H+] to FeM-co, generating intermediates designated E n , where n is the number of [e − /H + ] delivered. The electron-transfer has been extensively characterized, but the proton delivery has not. Here, we investigate [e − /H + ] delivery during early-stage conversions, primarily E 0 → E 1 (H), for each of the three nitrogenases, using as reductants γ-ray-generated thermolyzed, mobile electrons at 77 K, and radiation-generated solvent radicals during subsequent annealing to higher temperatures. Our results show E 0 → E 1 (H) conversion differs among the three MFe-proteins. The FeMo-co of MoFe-protein accepts an electron (ET) during 77 K γ-irradiation, but proton transfer (PT) to generate E 1 (H) is only enabled by conformational or thermodynamic activation upon cryoannealing to ∼200 K(ET/PT). For VFe-protein, E 1 (H) forms during annealing at-and-above 210 K by electron-transfer to FeV-co from radicals through proton-coupled electron transfer (PCET), which too is enabled by activated proton transfer. FeFe-protein differs in directly exhibiting delivery of protons at 77 K, which together with the mobile electrons react to form E 1 (H). This could well occur by PCET at 77 K, but does not preclude the possibility of sequential 77 K electron/proton transfer (ET/PT). In addition, 450 nm photolysis reveals the E 1 (H) state of FeV-co, like that of FeFe-co, contains a hydride bound to a formally oxidized cofactor. The mechanistic differences observed here provide a contribution towards understanding the sources of catalytic differences among the three nitrogenase isozymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unusual zwitterionic catalytic site of SARS–CoV-2 main protease revealed by neutron crystallography

The main protease (3CL M pro ) from SARS–CoV-2, the etiological agent of COVID-19, is an essential enzyme for viral replication. 3CL M pro possesses an unusual catalytic dyad composed of Cys 145 and His 41 residues. A critical question in the field has been what the protonation states of the ionizable residues in the substrate-binding active-site cavity are; resolving this point would help understand the catalytic details of the enzyme and inform rational drug development against this pernicious virus. Here, we present the room-temperature neutron structure of 3CL M pro , which allowed direct determination of hydrogen atom positions and, hence, protonation states in the protease. We observe that the catalytic site natively adopts a zwitterionic reactive form in which Cys 145 is in the negatively charged thiolate state and His 41 is doubly protonated and positively charged, instead of the neutral unreactive state usually envisaged. The neutron structure also identified the protonation states, and thus electrical charges, of all other amino acid residues and revealed intricate hydrogen-bonding networks in the active-site cavity and at the dimer interface. The fine atomic details present in this structure were made possible by the unique scattering properties of the neutron, which is an ideal probe for locating hydrogen positions and experimentally determining protonation states at near-physiological temperature. Our observations provide critical information for structure-assisted and computational drug design, allowing precise tailoring of inhibitors to the enzyme's electrostatic environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural analysis of the catalytic domain of Artemis endonuclease/SNM1C reveals distinct structural features

The endonuclease Artemis is responsible for opening DNA hairpins during V(D)J recombination and for processing a subset of pathological DNA double-strand breaks. Artemis is an attractive target for the development of therapeutics to manage various B cell and T cell tumors, because failure to open DNA hairpins and accumulation of chromosomal breaks may reduce the proliferation and viability of pre-T and pre-B cell derivatives. However, structure-based drug discovery of specific Artemis inhibitors has been hampered by a lack of crystal structures. Here, we report the structure of the catalytic domain of recombinant human Artemis. The catalytic domain displayed a polypeptide fold similar overall to those of other members in the DNA cross-link repair gene SNM1 family and in mRNA 3'-end-processing endonuclease CPSF-73, containing metallo-β-lactamase and β-CASP domains and a cluster of conserved histidine and aspartate residues capable of binding two metal atoms in the catalytic site. As in SNM1A, only one zinc ion was located in the Artemis active site. However, Artemis displayed several unique features. Unlike in other members of this enzyme class, a second zinc ion was present in the β-CASP domain that leads to structural reorientation of the putative DNA-binding surface and extends the substrate-binding pocket to a new pocket, pocket III. Moreover, the substrate-binding surface exhibited a dominant and extensive positive charge distribution compared with that in the structures of SNM1A and SNM1B, presumably because of the structurally distinct DNA substrate of Artemis. The structural features identified here may provide opportunities for designing selective Artemis inhibitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interfacial dynamics and catalytic behavior of single Ni atom site

Single-atom catalysts (SACs) have garnered significant interest due to their ability to reduce metal particles to the atomic scale, enabling finely tunable local environments and enhanced catalytic properties in terms of reactivity and selectivity. Despite this potential, their application has largely been confined to small-molecule transformations as metal-catalyzed reaction. Here, in this study, we present a diverse single-atom nickel (Ni) catalyst established via a nanoporous carbon (NPC) supported practice. This catalyst represents a breakthrough by achieving the bond formation between carbon and nitrogen and interfacial dynamics in the SAC. The present first principle-based density functional simulations establish the reaction dynamics and catalytic behaviour of such SAC. This dynamic nature comprises an exclusive nitrogen intercalated site showing excellent base effects. This base quickly tunes the interfacial atmosphere, enabling dynamic movement of adatoms into the NPC species, significantly changing the reaction path in Ni SACs due to superior steric effects. The research demonstrates that SACs can extend the capabilities of catalytic systems to include a wider range of complex reactions, offering substantial promise for the development of new, efficient synthetic methods for creating value-added molecular products.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Catalytic oxidative coupling of arenes and alkanes: applications for efficient chemical synthesis and for hydrocarbon oligomerization. Progress Report 2016-7. Final report

This is the final report for DE-FG02-08ER15997 with a grant period of 8/15/2008-8/14/2018 (plus 1 year NCE); Program: Basic Energy Sciences; PI: Melanie S. Sanford; co-PI: Adam J. Matzger. The project resulted in 20 publications, 12 supported entirely by this grant and 8 supported substantially by this grant. The overall goals of this project were design catalysts (both homogeneous catalysts and MOF-supported catalysts) to control reactivity and selectivity in energy relevant C–H bond functionalization reactions. The proposed research led to a variety of new catalysts and catalytic processes which are currently finding application in organic synthesis. These efforts were well aligned with the goals of the DOE BES Catalysis Science Program. C–H functionalization reactions have extensive applications in energy-related industries, including petroleum and biofuels processing. The research activities also matched many of the priority areas identified by the Catalysis Science Program, including: investigating problems at the interface of heterogeneous and homogeneous catalysis as a means to derive new catalysts; incorporating 2° interactions to modulate catalyst stability, reactivity, and selectivity; using these new catalysts to tune molecular-level catalytic activity and selectivity; and studying structure-reactivity relationships of inorganic, organic, or hybrid catalytic materials in solution.

02 PETROLEUM↗
DOE OSTI2020

Catalytic Removal of Oxygen and Pollutants in Exhaust Gases from Pressurized Oxy-Combustors

The primary goal of this project was to develop and validate advanced catalytic materials and systems for purifying the flue gas generated from pressurized oxy-combustors in an effort to achieve the purity specifications of carbon dioxide (CO 2 ) streams required by the U.S. Department of Energy (USDOE) for application in enhanced oil recovery. The technology has shown great potential for improving energy efficiency, simplifying process complexity, and lowering costs compared with current state-of-the-art oxy-combustion flue gas purification technologies. Laboratory studies were conducted for the development, characterization, and screening of metal catalysts for residual oxygen (O 2 ) reduction with methane (CH 4 ) and multifunctional carbon catalysts for combined nitrogen oxides (NO x ), sulfur oxides (SO x ), and mercury (Hg) removal. A bench-scale reverse-flow fixed-bed (RFFB) reactor and a trickle-bed direct-contact cooler (DCC) reactor capable of treating 15 standard liters per min of pressurized oxy-combustion flue gas were fabricated and tested with both a simulated flue gas in the laboratory and a slipstream of actual flue gas at a 100 kW th Staged, Pressurized Oxy-Combustion (SPOC) pilot facility. Process simulation and techno-economic studies were performed to evaluate the energy efficiency and cost of the developed catalytic flue gas purification process integrated into a conceptual 550-MWe SPOC power plant. The goal and objectives of the project have been successfully accomplished. A cobalt-manganese (CoMn) oxide catalyst was developed and demonstrated in the bench-scale RFFB reactor in either a reverse-flow or one-direction flow mode of operation that met the success criterion of performance for residual O 2 reduction. A carbon catalyst was developed and demonstrated in the bench-scale DCC reactor that met the success criterion of performance for combined NO x /SO x /Hg removal. Slipstream testing of the integrated DCC-RFFB system at the SPOC pilot facility demonstrated stable operation and verified the superior performance obtained in the laboratory. The techno-economic analysis showed that a 550-MWe SPOC plant integrated with the catalytic flue gas purification process would result in costs of electricity of $\$$96.94/MWh and $\$$80.27/MWh in two assessed cases compared with $\$$91.07/MWh reported for the USDOE’s Current Technology Case, which generated only a partially pure CO 2 stream. On the basis of the results and findings from this project, scale-up studies of materials production and system demonstration and optimization studies of reactors and processes are recommended at the next stage of technology development.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Development of physically transparent, predictive structure-performance relationships for rational design of multi-component catalytic materials. Final Report

Solid surfaces act as catalysts for many important chemical processes, including commodity chemicals production, energy conversion and pollution mitigation. The outcome of catalytic processes is mainly governed by interactions of adsorbates with active sites on the catalyst surface. These interactions can be dramatically affected by the changes in the local characteristics of the active site, which can be accomplished by an introduction of various promoters and poisons, or by alloying with other metal atoms. In fact, many commercial heterogeneous catalysts contain metal nanoparticles promoted by various additives. Our goal is to develop fundamental understanding about the impact of perturbations in the local geometry of a catalytic site on the local surface reactivity. These insights are crucial for a more systematic and rational catalyst design. The project aims to advance the field of catalysis by formulating reliable structure/performance relationships and utilizing these relationships to identify novel catalytic materials. Benefits for DOE and our society are in the development of fundamental theories that guide the process of discovery of energy-efficient and environmentally friendly heterogeneous catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Techno-Economic Assessment for the Production of Hydrocarbon Fuels via Catalytic Upgrading of Furans

This technical report documents the techno-economic analysis (TEA) implications of a biochemical/catalytic pathway for the production of long-chain hydrocarbon fuels in support to the multi-lab Catalytic Upgrading of Biochemical Intermediates (CUBI) project within the Chemical Catalysis for Bioenergy Consortium (ChemCatBio). Two distinct conceptual biorefineries centered around the process encompassing sugar dehydration to furans, aldol condensation between furans and a ketone (methyl ethyl ketone [MEK]), and a final step of hydrotreating to obtain hydrocarbons in the C 14 -C 16 range are considered: an integrated plant that simultaneously produces both furans (furfural and HMF) and ketone (MEK via 2,3-butanediol [BDO]) from sugars and a dedicated facility focused on producing furans from corn stover hydrolysate and procuring the ketone externally. In either plant, the main coproducts are adipic acid (derived from lignin) and sodium sulfate. The results from the assessment are quite comparable to those reported in previous design case focused on biological conversion of sugars to fermentation intermediates with subsequent catalytic upgrading of those intermediates to hydrocarbon fuels, thus presenting another viable alternative pathway to achieve similar fuel cost targets through purely catalytic upgrading of sugars. Since this study considers long-term performance targets for the full pathway dedicated to sugar upgrading to fuels, the critical remaining research points needed to achieve future cost goals are also discussed. Finally, this report presents a single-point sensitivity analysis around selected parameters to identify the major cost drivers of the biorefineries and provides a qualitative discussion on additional opportunities for cost reduction within the proposed concepts, namely through adding value to furans, to coproducts that may be obtained following BDO dehydration, and to lignin through alternative pathways.

09 BIOMASS FUELS↗
DOE OSTI2021

A Novel Hollow Fiber Membrane Reactor for High Purity H 2 Generation from Thermal Catalytic NH 3 Decomposition (Final Report)

Ammonia (NH 3 ), as a promising carbon neutral liquid fuel (CNLF) and an effective H 2 source, can be synthesized from air and water (N 2 extracted from air and H 2 from water) using renewable energy sources. To produce H 2 as an intermediate, it is essential to develop effective and economic NH 3 decomposition technologies. We have been developing an innovative hollow fiber membrane reactor for high purity H 2 generation from thermal catalytic NH 3 decomposition. The objective of the proposed research is to fabricate a compact and robust prototype with high energy efficiency (>80%) to deliver high purity (>99%) H2 at high rate per volume (>0.15 g H 2 /h/cm 3 ) from NH3 decomposition at low temperature (<450 °C) and high conversion (>99%). Our overall technical approach is to effectively combine an active catalyst for NH 3 decomposition with a selective H 2 membrane separation process in a novel, compact modular system to generate high purity H 2 and simultaneously achieve high NH 3 conversion and optimize the entire system energy efficiency. This novel integrated membrane reactor design, together with low-cost, highly active Ru-based catalyst, makes it most appropriate for the project objective. The proposed applied research and development work, therefore, represents an innovative and transformational solution to H 2 generation from thermal catalytic NH 3 decomposition. During the course of our research we i) synthesized and characterized ruthenium(Ru)-based catalysts, evaluated their catalytic performance for NH 3 decomposition and optimized the catalyst composition and performance based on machine learning, ii) prepared SAPO-34, MFI membranes on α-alumina hollow fibers and measured their performance for H 2 /N 2 , H 2 /N 2 /NH 3 separation and evaluated carbon molecular sieve (CMS) and Pd/Ag membranes for H 2 /N 2 , H 2 /N 2 /NH 3 separation at different conditions, iii) designed and evaluated several types of membrane reactors for H 2 production from NH 3 decomposition, and iv) evaluated the H 2 delivery cost base on catalysts development, membrane development and membrane reactor. For 3,1,12 RuYK catalyst, H 2 productivity of 6.35 mmol/min/gcat with NH 3 conversion of 95~98% was achieved at 5 bar and 400 °C; for SAPO-34 membrane, the best membrane showed H 2 permeance of 7.56×10 -7 mol/(m 2 ∙s∙Pa) and H 2 /N 2 selectivity of 23.1 at 20 °C; For CMS and Pd/Ag membranes, both showed superior stability for 71%H 2 /24%N 2 /5%NH 3 mixture separation at 450 °C and 7 bar for over 120 h; for the membrane reactor, high H 2 purity of >99.99% with NH 3 conversion of >99.4% were achieved in Pd/Ag membrane reactor at 450 °C, and the NH 3 concentration was always below 10 ppb in H 2 product. The H 2 generation rate was calculated to be as high as 0.47 g/h/cm 3 and the energy efficiency was calculated to be 88%. The membrane reactor showed superior stability for over 370 h and high H 2 purity, H 2 production rate and NH 3 conversion. Based on calculation, the H 2 delivery cost can be as low as $3.66/kg.

08 HYDROGEN↗
DOE OSTI2023

Unifying principles for catalytic hydrotreating processes (Final Technical Report)

This project builds on the hypothesis that the hydrotreating processes for the removal of oxygen and sulfur are fundamentally similar at the atomic-scale and existing knowledge from the treatment of petroleum derived feedstock can be leveraged for the design of novel catalysts for the upgrade of bio-oil. We tested this hypothesis by comparing computed potential energy diagrams for hydrodesulfurization (HDS) of thiophene over MoS 2 with hydrodeoxygenation (HDO) of furan over MoO 3 and concluded that certain aspects, such as catalyst promotion with transition metals, are valid strategies for both reactions. On the other hand, we also noticed significant differences in the mechanism for hydrogen (H 2 ) activation, which requires sites with metallic character. While MoS 2 is known to have metallic edge states that can catalyze H 2 dissociation, this elementary step is prohibitively slow on defect-free oxides. Only in the presence of vacancies or by creating metal/oxide interfaces can efficient H 2 activation sites during HDO be formed. The need for bifunctional catalyst when it comes to efficient and selective HDO or dehydrogenation reactions was further corroborated in joint experimental and theoretical studies of the Guerbet reaction for the coupling of biomass derived oxygenates over PdCu alloys, nitrate reduction over In-promoted Pd nanoparticles, and ethylene dehydroaromatization over Ga-exchanged ZSM-5 zeolites. All of these catalytic systems have in common that catalytic sites with distinct functional requirements are needed to create a working catalyst. Detailed computational studies were carried out for HDO of m -cresol and phenol on Ru-modified TiO 2 surfaces, which allowed us to attribute catalytic activity to the metal/oxide interface. A surprising finding was that heterolytic cleavage of the H-H bond across the Ru/TiO 2 interface was critically important, despite lower barriers for homolytic H 2 activation on Ru metal. The explanation lies in the high barriers for hydrogen spillover from Ru to TiO 2 , which becomes unnecessary in the heterolytic activation pathway. Moreover, we also reported that proton transfer steps between metal and oxide sites are mediated by weakly adsorbed surface water. During attempts to develop and validate a kinetic Monte Carlo (kMC) model for HDO reactions at the Ru/TiO 2 interface, it became clear that lateral interactions are paramount to describe realistic surface chemistry and without these interactions, the reduction and hydroxylation behavior from our simulations was inconsistent with reported experiments. To assess the importance of lateral interactions in popular computational catalyst design strategies relying on the identification of reactivity descriptors, which can be used along with Brønsted–Evans–Polanyi (BEP) and scaling relations as input to a microkinetic model (MKM) to make predictions for activity or selectivity trends, we compared predicted trends with those obtained from descriptor-based kMC models. We critically evaluated the benefits of kMC over MKM in terms of trend predictions and computational cost when using only a small set of input parameters. After confirming that in the absence of lateral interactions the kMC and MKM approaches yield identical trends and mechanistic information, we observed substantial differences between the two kinetic models when lateral interactions were introduced. The mean-field implementation applies coverage corrections directly to the descriptors, causing an artificial overprediction of the activity of strongly binding metals. In contrast, the cluster expansion in kMC implementation can differentiate among the highly active metals but it is very sensitive to the set of included interaction parameters. Considering that computational screening relies on a minimal set of descriptors, for which MKM makes reasonable trend predictions at a ca. three orders of magnitude lower computational cost than kMC, we concluded that the MKM approach does provide an overall better entry point for computational catalyst design. Overall, this project has led to 11 peer-reviewed publications, and their scientific is impact is well illustrated by their combined 702 citations.

08 HYDROGEN↗
DOE OSTI2025

Probing Condensed-Phase Structure and Dynamics in Hierarchical Zeolites and Nanosheets for Catalytic Upgradation of Biomass (Final Report)

Understanding complex reaction pathways in systems governed by multi-scale collective interactions across time and length scales remains a central scientific challenge. This project was guided by the hypothesis that the interplay among oligomers, solvents, and active sites can be tuned by a suitable choice of solvation environment and pore architecture in solid-acid catalysts to direct chemical transformations relevant to biomass conversion. Zeolites and zeolite nanosheets were used as model platforms, allowing for the interaction of macromolecules with the surface of the zeolite nanosheets and with smaller pores that host catalytically active sites. To investigate these coupled phenomena, we employ a multi-scale computational framework that integrates molecular-level descriptions with advanced sampling approaches to capture key physical and chemical interactions. Our work through this project improved fundamental understanding of how reactants and solid-acid catalysts interact in solvent-rich environments, thereby enabling the rational design of catalytic systems that upgrade biomass with enhanced selectivity and energy efficiency. In addition, the project developed advanced sampling methodologies critical for disentangling complex, reactive processes in multi-component catalytic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic insights to drive catalytic hydrogenation of formamide intermediates to methanol via deaminative hydrogenation

Amine-promoted hydrogenation of CO 2 to methanol typically proceeds via a formamide intermediate when amines are used as additives or if the hydrogenation is performed in carbon capture solvents. The catalysts used for the hydrogenation of the formamide intermediate dictate the selectivity of the products formed: 1) Deoxygenative hydrogenation (C–O bond cleavage) resulting in N-methylation of amine and deactivation of the solvent, 2) Deaminative hydrogenation (C–N bond cleavage) resulting in formation of methanol and regeneration of the solvent. To date, catalytic reductions of CO 2 with amine promoters suffer from poor selectively for methanol which we attribute to the limiting formamide intermediate, though to date, the conditions that favor C–N cleavage have yet to be fully understood. To better understand the reactivity of the formamide intermediates, a range of heterogenous catalysts were used to study the hydrogenation of formamide. Well-known gas phase CO 2 hydrogenation catalysts catalyze the hydrogenation of formamide to N-methyl product via C–O bond cleavage. However, the selectivity can be readily shifted to selective C–N bond cleavage by addition of an additive with sufficient basicity for both homogenous and heterogeneous catalytic systems. The base additive shifts the selectivity by deprotonating a hemiaminal intermediate formed in situ during the formamide hydrogenation. This prevents dehydration process leading to N-methylated product, which is a key capture solvent deactivation pathway that hinders amine use in carbon capture, utilization, and storage (CCUS). The findings from this study provide a roadmap on how to improve the selectivity of known heterogenous catalysts, enabling catalytic reduction of captured CO 2 to methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗