Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “beam physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Spacecraft charging in the auroral plasma: Progress toward understanding the physical effects involved

The work is presented in four parts. First, main differences between the plasma environments in geostationary orbit and low polar orbit with regard to high-voltage charging situations are reviewed. Next, results are presented from a calculation of secondary-electron escape currents from negatively-charged spacecraft surfaces having various orientations relative to the local magnetic-field direction. It is shown that for finite ranges of combinations of electric and magnetic field directions, secondary-electron escape is completely suppressed and therefore cannot help to discharge the spacecraft. In such circumstances, secondary electrons may travel distances many times their gyroradii before reimpacting, and this may produce greatly increased secondary-electron surface currents. Thirdly, a simple rough estimate of the required conditions for high-voltage auroral-zone charging is developed. The results suggest that for any given spacecraft, surface potentials are likely to depend more strongly on the ratio of ambient flux of high-energy electrons to that of all ions, than on any other environmental parameter. Finally, preliminary results are presented of numerical simulation work directed toward testing this hypothesis. Numerical instabilities encountered in doing this simulation work probably are closely related to physical sensitivities inherent in the physics of the ion wake behind the spacecraft, and especially to beam-like constituents of the ion population in the wake.

Laframboise, J. G.↗
NASA NTRS1988

A Method for Producing a Shaped Contour Radiation Pattern Using a Single Shaped Reflector and a Single Feed

Eliminating the corporate feed network in shaped contour beam antennas will reduce the expense, weight, and RF loss of the antenna system. One way of producing a shaped contour beam without using a feed network is to use a single shaped reflector with a single feed element. For a prescribed contour beam and feed, an optimization method for designing the reflector shape is given. As a design example, a shaped reflector is designed to produce a continental U.S. coverage (CONUS) beam. The RF performance of the shaped reflector is then verified by physical optics.

Cherrette, A. R.↗
NASA NTRS1988

Analysis and test of a space truss foldable hinge

The Mini-Mast is a 20-meter long deployable, three-longeron, truss-beam being used to develop analytical and experimental methods for predicting the physical behavior of large space structures. With 57 corner-body hinges and 54 mid-body hinges, the Mini-Mast is highly joint-dominated, necessitating inclusion of the compliance of the joints in analytical models. This study demonstrates an approach for calculating the stiffness properties of a complicated hinge called the mid-body hinge. The process includes detailed modeling with solid-body modeling software and the use of finite element analysis. Load-deflection tests were conducted to determine the axial stiffness of the mid-body hinge. This is compared to the axial stiffness value determined from a finite element analysis.

Nimmo, N. A.↗
NASA NTRS1989

A method for producing a shaped contour radiation pattern using a single shaped reflector and a single feed

Eliminating the corporate feed network in shaped contour beam antennas will reduce the expense, weight, and RF loss of the antenna system. One way of producing a shaped contour beam without using a feed network is to use a single shaped reflector with a single feed element. For a prescribed contour beam and feed, an optimization method for designing the reflector shape is given. As a design example, a shaped reflector is designed to produce a continental U.S. coverage (CONUS) beam. The RF performance of the shaped reflector is then verified by physical optics.

Cherrette, Alan R.↗
NASA NTRS2001

Micromachined TWTs for THz Radiation Sources

The Terahertz (THz) region of the electromagnetic spectrum (about 300 - 3000 GHz in frequency or about 0.1 - 1 mm free space wavelength) has enormous potential for high-data-rate communications, spectroscopy, astronomy, space research, medicine, biology, surveillance, remote sensing, industrial process control, etc. It has been characterized as the most scientifically rich, yet under-utilized, region of the electromagnetic spectrum. The most critical roadblock to full exploitation of the THz band is lack of coherent radiation sources that are powerful (0.001 - 1.0 W continuous wave), efficient (> 1%), frequency agile (instantaneously tunable over 1% bandwidths or more), reliable, and comparatively inexpensive. To develop vacuum electron device (VED) radiation sources satisfying these requirements, fabrication and packaging approaches must be heavily considered to minimize costs, in addition to the basic interaction physics and circuit design. To minimize size of the prime power supply, beam voltage must be minimized, preferably 10 kV. Solid state sources satisfy the low voltage requirement, but are many orders of magnitude below power, efficiency, and bandwidth requirements. On the other hand, typical fast-wave VED sources in this regime (e.g., gyrotrons, FELs) tend to be large, expensive, high voltage and very high power devices unsuitable for most of the applications cited above. VEDs based on grating or inter-digital (ID) circuits have been researched and developed. However, achieving forward-wave amplifier operation with instantaneous fractional bandwidths > 1% is problematic for these devices with low-energy (< 15 kV) electron beams. Moreover, the interaction impedance is quite low unless the beam-circuit spacing is kept particularly narrow, often leading to significant beam interception. One solution to satisfy the THz source requirements mentioned above is to develop micromachined VEDs, or "micro-VEDs". Among other benefits, micro-machining technologies provide superior high frequency wall conductivity as a result of superior surface smoothness compared with conventional mechanical or electric discharge machining approaches. Micro-VED technologies are already being applied to the development of millimeter-wave klystrons at Stanford Linear Accelerator Center and submillimeter-wave klystrons at the University of Leeds. We are investigating the use of micro-machining technologies to develop THz regime TWTs, with emphasis on folded-waveguide TWTs. The folded-waveguide TWT (FW-TWT) has several features that make it attractive for THz-regime micro-VED applications. It is a relatively simple circuit to design and fabricate, it is amenable to precision pattern replication by micro-machining, and it is has been demonstrated capable of forward-wave amplification with appreciable bandwidth. We are conducting experimental and computational studies of micro-VED FW-TWTs to examine their feasibility for applications at frequencies from 200 - 1000 GHz.

Booske, John H.↗
NASA NTRS2004

New Glass Serves as Window to Cutting-edge Lasers

Since 1997, Marshall Space Flight Center s Electrostatic Levitator (ESL) facility has been used to study the characteristics of new metals, ceramics, and glass compounds - in both their hot molten states and as they are cooled to form solid materials. The ESL provides a unique way to test such substances without having to make contact with a container or crucible that would contaminate the sample. Simply put, objects analyzed in the levitator's chamber float in mid-air with no visible means of support or containment, suspended only by static electricity. While a sample object is levitated, a laser beam heats it until it melts so that scientists can measure its physical properties without interference from a container.

Source record↗
NASA NTRS2005

Medical and Scientific Evaluations aboard the KC-135. Microgravity-Compatible Flow Cytometer

A spaceflight-compatible flow cytometer would be useful for the diagnosis of astronaut illness during long duration spaceflight and for conducting in-flight research to evaluate the effects of microgravity on human physiology. Until recently, the primary limitations preventing the development of a spaceflight compatible flow cytometer have been largely mechanical. Standard commercially available flow cytometers are large, complex instruments that use high-energy lasers and require significant training to operate. Standard flow cytometers function by suspending the particles to be analyzed inside a sheath fluid for analysis. This requires the presence of several liters of sheath fluid for operation, and generates a corresponding amount of liquid hazardous waste. The particles are then passed through a flow cell which uses the fluid mechanical property of hydrodynamic focusing to place the cells in single-file (laminar flow) as they pass through a laser beam for scanning and evaluation. Many spaceflight experiments have demonstrated that fluid physics is dramatically altered in microgravity (MSF [Manned Space Flight] Fluid Physics Data Sheet-August 1997) and previous studies have shown that sheath-fluid based hydrodynamic focusing may also be altered during microgravity (Crucian et al, 2000). For these reasons it is likely that any spaceflight compatible design for a flow cytometer would abandon the sheath fluid requirement. The elimination of sheath fluid would remove both the problems of weight associated with large volumes of liquids as well as the large volume of liquid waste generated. It would also create the need for a method to create laminar particle flow distinct from the standard sheath-fluid based method. The spaceflight prototype instrument is based on a recently developed commercial flow cytometer possessing a novel flow cell design that creates single-particle laser scanning and evaluation without the need for sheath-fluid based hydrodynamic focusing. This instrument also possesses a number of design advances that make it conditionally microgravity compatible: it is highly miniaturized and lightweight, uses a low energy diode laser, has a small number of moving parts, does not use sheath fluid and does not generate significant liquid waste. Although possessing certain limitations, the commercial cytometer functions operationally like a standard bench top laboratory flow cytometer, aspirating liquid particle samples and generating histogram or dot-plot data in standard FCS file format. In its current configuration however, the cytometer is limited to three parameter/two-color capability (two color PMTs + forward scatter), does not allow compensation between colors, does not allow linear analysis and is operated by rather inflexible software with limited capabilities. This is due to the fact that the cytometer has been designed and marketed as an instrument specific to a few particular assays, not as a multipurpose cytometer.

Crucian, Brian↗
NASA NTRS2012

LightForce: An Update on Orbital Collision Avoidance Using Photon Pressure

We present an update on our research on collision avoidance using photon-pressure induced by ground-based lasers. In the past, we have shown the general feasibility of employing small orbit perturbations, induced by photon pressure from ground-based laser illumination, for collision avoidance in space. Possible applications would be protecting space assets from impacts with debris and stabilizing the orbital debris environment. Focusing on collision avoidance rather than de-orbit, the scheme avoids some of the security and liability implications of active debris removal, and requires less sophisticated hardware than laser ablation. In earlier research we concluded that one ground based system consisting of a 10 kW class laser, directed by a 1.5 m telescope with adaptive optics, could avoid a significant fraction of debris-debris collisions in low Earth orbit. This paper describes our recent efforts, which include refining our original analysis, employing higher fidelity simulations and performing experimental tracking tests. We investigate the efficacy of one or more laser ground stations for debris-debris collision avoidance and satellite protection using simulations to investigate multiple case studies. The approach includes modeling of laser beam propagation through the atmosphere, the debris environment (including actual trajectories and physical parameters), laser facility operations, and simulations of the resulting photon pressure. We also present the results of experimental laser debris tracking tests. These tests track potential targets of a first technical demonstration and quantify the achievable tracking performance.

Stupl, Jan↗
NASA NTRS1976

Six-beam models in radiative transfer theory

A critical analysis is given of the applicability of six-beam models to radiative transfer in particulate materials. The method of introducing transverse scattering in these models is shown to cause fundamental difficulties in the case of physically plausible phase functions; in particular, the effective absorptivity is abnormally large and thus results in incorrect reflectances and transmittances. Six-beam calculations for several media are compared with accurate solutions, with Chu-Churchill two-beam results, and with a simple modification to the Eddington approximation, the last being generally superior over a wide range of conditions.

Meador, W. E.↗
NASA NTRS1991

Physics of heavy ions (1989-1990)

The results from studies on polar wind ion heating due to kinetic ion beam instabilities and the effects of such ion heating on the outflow of O(+) in the polar wind are presented and discussed. First, the linear instabilities associated with an O(+) and H(+) polar wind plasma in the presence of O(+) and H(+) beams for a range of O(+)/H(+) beam densities, T(sub e)/T(sub i), and ion beam speeds were examined. Then, nonlinear heating of the polar wind ions was studied, using numerical simulations. The O(+) and H(+) polar wind ions were modeled by isotropic Maxwellian distributions, and the electrons, O(+) beams, and H(+) beams were modeled by drifting Maxwellian distributions. The effects of the kinetic ion heating on the outflow of the polar wind ions were examined from the ionosphere, using a time-dependent hydrodynamic model. A numerical code to solve the O(+) and H(+) continuity and momentum equations in a flux tube from ionospheric to magnetospheric altitudes were developed. The effects of ion heating were included by allowing for the altitudinal variation of the ion temperatures in the momentum equation. The ion temperature profiles were specified based on the ion heating characteristics found from previous kinetic simulations. It was assumed that heating occurred above 1500 km and increased to a saturated value of temperature that was obtained directly from the kinetic simulation study. The characteristics of the dynamical polar wind without ion heating were studied, and a flux tube on closed field lines that suddenly became open at t = 0 was simulated. Then, the effects of ion heating were included. To gain some physical insight, two limiting cases were considered: preferential H(+) heating and preferential O(+) heating. How O(+) heating can lead to enhanced polar wind O(+) fluxes in the polar magnetosphere is shown.

Ashour-Abdalla, M.↗
NASA NTRS2001

Performance Modeling of Experimental Laser Lightcrafts

A computational plasma aerodynamics model is developed to study the performance of a laser propelled Lightcraft. The computational methodology is based on a time-accurate, three-dimensional, finite-difference, chemically reacting, unstructured grid, pressure-based formulation. The underlying physics are added and tested systematically using a building-block approach. The physics modeled include non-equilibrium thermodynamics, non-equilibrium air-plasma finite-rate kinetics, specular ray tracing, laser beam energy absorption and refraction by plasma, non-equilibrium plasma radiation, and plasma resonance. A series of transient computations are performed at several laser pulse energy levels and the simulated physics are discussed and compared with those of tests and literatures. The predicted coupling coefficients for the Lightcraft compared reasonably well with those of tests conducted on a pendulum apparatus.

Wang, Ten-See↗
NASA NTRSDate not supplied

Laser Beam Welding for in-Space Joining Demonstrated Under Vacuum on the Ground and By Parabolic Flight Experiments

High energy density electron beam welding enabled the first and, to date, only American weld performed in space during the M551 experiment on Skylab in 1973. Though welding is critical to 90% of durable goods manufacturing in America, there is not yet regular and reliable application of welding processes to the In-space Servicing, Assembly, and Manufacturing (ISAM) sector. Fundamental studies are needed to develop basic capabilities and to enhance fundamental process knowledge, which will support follow-on efforts to mature in-space welding for use in commercial, defense, and other aerospace applications. The current work seeks to build on past flights and improve understanding and quantification of materials joining in space conditions using laser beam welding (LBW). LBW offers several advantages over the electron beam welding of Skylab, amongst others: reduced electromagnetic interference, less exposure of operators to ionizing radiation, and flexible delivery through optical fibers supporting unique workpieces and joints. Since there is no orbital laboratory to mature laser beam welding for space, the current effort addresses maturation of laser beam welding through parabolic flights augmented with data collection to enable numerical modeling efforts that capture the physical effects of the space environment. This team has retrofitted an LBW experimental apparatus that can simulate the vacuum and, during a parabolic flight, the reduced gravity & microgravity conditions of in-space welding. A team of Capstone students modified the setup, originally developed by NASA Langley Research Center for electron beam free-form fabrication, to replace its electron gun with a 1 kW, 1070 nm Yb fiber laser. The apparatus was further instrumented with temperature sensing and high-speed welding cameras to monitor and record changes in the thermal state of the workpiece, the melt pool, the laser penetration level, and the development and orientation of spatter & plumes. The system will operate autonomously, demonstrating its utility to uncrewed missions. During upcoming parabolic flight campaigns expected summer 2024, this LBW equipment will weld common aerospace alloys of aluminum, stainless steel, and titanium under conditions representative of the space environment. This data will guide future computational modeling efforts of laser welding in space and help to qualify in-space welding as a viable ISAM technique.

laser beam welding↗
NASA NTRS1981

Electromagnetic-wave excitation in a large laboratory beam-plasma system

The mechanism by which unstable electrostatic waves of a beam-plasma system are converted into observed electromagnetic waves is of current interest in space physics and in tokamak fusion research. The process involved in the conversion of electrostatic to electromagnetic waves at the critical layer is well understood. However, the radiation from uniform plasmas cannot be explained on the basis of this process. In connection with certain difficulties, it has not yet been possible to establish the involved emission processes by means of experimental observations. In the considered investigation these difficulties are overcome by employing a large laboratory plasma in a parameter range suitable for detailed diagnostics. A finite-diameter electron beam is injected into a uniform quiescent afterglow plasma of dimensions large compared with electromagnetic wavelengths. The considered generation mechanism concerning the electromagnetic waves is conclusively confirmed by observing the temporal evolution of an instability

Whelan, D. A.↗
NASA NTRS2004

Rapid Switching and Modulation by use of Coupled VCSELs

Devices incorporating coupled vertical-cavity surface-emitting lasers (VCSELs) have been proposed as means to effect unprecedentedly rapid modulation and/or switching of light beams in advanced optical communication and information-processing systems. A basic device according to the proposal would comprise two or more VCSELs (1) positioned so close to each other that they are coupled and (2) connected to a current source that biases them at a steady current above the threshold current for lasing. The operation of VCSELs under the conditions stated above has been simulated computationally with an algorithm that solves an approximation of the Maxwell-Bloch equations. (These are nonlinear coupled partial differential equations that model the relevant aspects of the physics of semiconductor lasers.) The results of the simulations show that the intensities of the beams oscillate, out of phase relative to each other, at a frequency that is typically of the order of tens of gigahertz. In particular, one simulation was performed for two coupled VCSELs, each having a circular aperture 5.6 microns in diameter, operating at a wavelength of 980 nm. The results of the simulation showed that the intensities of the two beams oscillated in opposite phase (see Figure 1) at a frequency of 42 GHz. In the far field, the beams were found to be separated by an angle of approx.=8deg. The intensities of the beams were also found to oscillate in the near field, 90deg out of phase with the oscillation in the far field. Figure 2 depicts a simple near-field switching device in which an assembly of microlenses would couple the two oscillating beams to two receivers.

Goorjian, Peter M.↗
NASA NTRS1989

Globally optimal maneuver of distributed systems

This paper examines the globally optimal maneuver of distributed systems undergoing large overall rigid-body motion and small relative elastic motion. Using floating coordinates the rigid-body motion and the elastic motion are decoupled thereby allowing the globally optimal maneuver problem to be separated into components associated with the rigid-body and elastic motions. The maneuvers are performed using distributed maneuvering forces based on modal measurements. The modal measurements are extracted from the physical measurements using modal filters. Rest-to-rest maneuvers of a uniform beam illustrate the decentralized nature of the globally optimal solutions.

Silverberg, Larry↗
NASA NTRS1999

Probing Blazar Structure Through Multiwavelength Variability

This was a project to understand the multiwavelength variability of blazars, via monitoring with the XTE satellite and many other space- and ground-based observatories. Blazars are dominated by strong nonthermal emission, we now know, due to relativistic beaming in an aligned jet. Thus they are ideal laboratories for studying jet physics. The physical scales of the inner, energetically dominant jets are generally too small to resolve with current or next-generation instruments, so we used variability to probe the balance between acceleration/injection of energetic particles and radiative/other losses, and to infer jet structure. Our work has shown that the radio through UV-X-ray emission is produced via synchrotron radiation, and that at the peak frequency and above, the emission region is approximately homogeneous. A separate gamma-ray component, which is often energetically dominant, varies in a correlated way but with larger amplitude, suggesting it is produced when the synchrotron-emitting electrons Compton scatter soft photons (though other possibilities remain viable). With RXTE we carried out two intensive monitoring campaigns on the blazar PKS2155-304, in May 1996 and November 1996. Analysis and interpretation of these data constituted the main activities under this grant. The results have been presented at several meetings, and a number of publications have resulted from this work. In addition, a final paper for a refereed publication is in final draft form, as are companion papers based on simultaneous Rosat and EUVE results.

Urry, C. Megan↗
NASA NTRS2000

Comparison of Nonlinear Random Response Using Equivalent Linearization and Numerical Simulation

A recently developed finite-element-based equivalent linearization approach for the analysis of random vibrations of geometrically nonlinear multiple degree-of-freedom structures is validated. The validation is based on comparisons with results from a finite element based numerical simulation analysis using a numerical integration technique in physical coordinates. In particular, results for the case of a clamped-clamped beam are considered for an extensive load range to establish the limits of validity of the equivalent linearization approach.

Rizzi, Stephen A.↗
NASA NTRS1971

A multiple-beam spherical reflector antenna

A spherical reflector with multiple feeds is considered for application in communications satellite systems. Data are presented which show that spherical reflectors possessing relatively high gain (40 db) and very small phase path error are feasible. A design of a spherical reflector utilizing corrugated horn feeds is considered. Radiation patterns are computed using the physical-optics technique. The designed antenna is approximately 60 lambda in diameter. Calculations performed for this antenna with three beams indicate that each beam has a gain of about 42 db, a beamwidth of 1.4 deg, and sidelobes that can be expected to be at least 28 db down. These results indicate that the feature of low sidelobes makes the spherical reflector a consideration for a multiple-beam communications satellite antenna.

Woo, R.↗