Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “basins”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Ages of flow units in the far eastern maria and implications for basin-filling history

The spatial distribution of major units of uniform relative age exposed in the far eastern maria and Mare Humorum was determined using a crater density mapping technique. Correlation of crater densities and radiometric ages of Apollo and Luna landing sites provided estimates of the absolute ages for the units. The combination of such data with relative age data from previous crater morphology studies produced a complete map of the distribution of major age units in the lunar near-side maria. The map shows that there are young (2.5 + or - 0.5 billion years old) mare basalts in the eastern maria, although most young flows occur in the western maria. The vents for the young flows generally are found along the edges of basins. Because old mare units (greater than 3.5 billion years old) are also commonly found around the edges of the basins, it is suggested that the basins were subsiding during filling, probably as a result of isostatic compensation due to the weight of the lava.

Boyce, J. M.↗

Origin of multi-ring basin ridge systems - An upper limit to elastic deformation based on a finite-element model

A finite-element model of a 500-km diameter lunar basin flooded with 10 km of basalt was used to represent the central portion of a multi-ring basin undergoing elastic deformation as a result of basin subsidence. Gravitational forces due to the weight of the basalt were set as the initial forces in the model; elastic constants computed from seismic velocities of lunar samples provided strength specifications. In addition, the crust was constrained by permitting no displacements at a depth of 60 km. Because of the strength of the lithosphere, surface subsidence amounted to only 20 m. This magnitude of elastic deformation does not equal that found on the lunar surface, but the orientation of principal stress and the position of circumferential compressional stress are compatible with the evolution of inner-ring and radial ridge systems by gravitational-induced downdropping.

Maxwell, T. A.↗

Lunar mascon basins - Lava filling, tectonics, and evolution of the lithosphere

The paper extends the study of the relationships among lunar mare filling, mare basin tectonics, and global thermal evolution to the major mascon maria: Imbrium, Crisium, Orientale, Humorum, Nectaris, Smythii, Grimaldi, and Serenitatis. For each of the eight major mascon mare basins on the moon, the paper describes the distribution and history of major mare units, the characteristics and geometry of basin-related tectonic features, the temporal relations between tectonic features and geologic units, the response of the lunar lithosphere to basalt loading as a function of space and time, and the relationship between loading stress and global thermal stress in controlling lunar tectonic history. The principal features of the volcanic, tectonic, and thermal history of the mascon maria are summarized.

Solomon, S. C.↗

Modification of multi-ring basins - The Imbrium model

It is shown that the gross variations in wall height around Imbrium result largely from intersection of the Imbrium basin with pre-existing basins and faulting: angle of impact and slumping played a lesser modifying role. The gross irregularities in plan of the northern part of Imbrium is hypothesized to result from the collapse of large crustal blocks into the Imbrium and Serenitatis cavities. Lithosphere thickness is believed to play an important role in the mechanisms of formation and modification of large craters and basins. The deduction of slow sub-lithospheric flow of material toward the cavity centers does not lend support to the tsunami model, requires a minor modification of the nested-crater model and provides a mechanism for the production of megaterraces. Spatial and temporal lithosphere variations satisfy constraints requiring the overlap of morphology/diameter characteristics, variable onset diameters between planets, variable ring spacings from planet to planet and provide a mechanism for producing local irregularities in ring structures.

Whitford-Stark, J. L.↗

Verification of LANDSAT imagery for morphametric and topological studies of drainage basins in a section of the western plateau of Sao Paulo State: Tiete-Aguapei watershed

The potential of using LANDSAT MSS imagery for morphometric and topological studies of drainage basins was verified. Using Tiete and Aguapei watershed (Western Plateau) as the test site because of its homogeneous landscape. Morphometric variables collected for ten drainage basins include: circularity index; river density; drainage density; topographic texture; areal and index length; basin parameter; and main river length 1st order and 2nd order channel length. The topographical variables determined were: order; magnitude; bifuraction ratio; weighted bifuraction ratio; number of segments; number of linking; trajectory length; and topological diameter. Data were collected on topographical maps at the scale of 1:250,000 and 1:59,000 and on LANDSAT imagery at the scale of 1:250,000. The results which were summarized on tables for further analysis, show that LANDSAT imagery can supply the lack of topographic charts for drainage studies.

Parada, N. D. J.↗

Volumetric analysis of complex lunar craters - Implications for basin ring formation

The crater to basin transition in complex lunar craters is characterized by combining morphological and volumetric analyses of their central peaks with subsurface data from terrestrial complex impact structures which suggest that the amount of uplifted material, as judged from its depth of origin, continues to increase with increasing rim diameter. This latter phenomenon implies that a redistribution of uplifted material away from a centralized peak may occur in the larger craters. The morphological and volumetric changes described occur over a rim diameter range of 51-80 km, which is considerably lower than the previously proposed range for the crater to basin transition of 140-175 km. Evidence is given in support of a crater to basin transition which begins at 51-80 km, and is characterized by a relative reduction in central peak volume and a development of rings of floor roughening which may be precursors of peak ring development.

Hale, W. S.↗

Jakobshavns Glacier drainage basin - A balance assessment

Maximum and minimum estimates are made of the drainage basin feeding the Jakobshavns Glacier by using surface elevation maps derived from Seasat altimetry. Benson's (1962) net balance measurements are used to calculate the balance flow within the basin. Comparisons of the balance flux at the terminus with estimates of actual flux suggest the basin is in overall equilibrium or slightly thickening. This agrees with measurements along the nearby EGIG traverse. Balance velocities accelerate rapidly within 100 km of the coast. Farther upstream, balance velocities are consistent with both measured velocities along the EGIG traverse and calculated deformation velocities. It is estimated that Jakobshavns Glacier discharges between 4.8 and 7.6 percent of the annual net balance over Greenland and drains between 3.7 and 5.8 percent of the ice sheet area.

Bindschadler, R. A.↗

Martian impact basins: Morphology differences and tectonic provinces

Detailed geomorphic and structural mapping of five Martian basins and preliminary study of eleven other basins reveal four characteristic styles of modification that relate to the degree and age of past tectonic activity. Within regions that exhibit no evidence for tectonic activity, the modification style can be used to distinguish areas dominated by different exogenic processes. A framework for understanding these different styles of basin modification is provided.

Stam, M.↗

Gravity anomalies and the structure of western Tibet and the southern Tarim Basin

Gravity anomalies across the western part of the Tarim Basin and the Kunlun mountain belt show that this area is not in local isostatic equilibrium. These data can be explained if a strong plate underlying the Tarim Basin extends southwestward beneath the belt at least 80 km and supports part of the topography of northwest Tibet. This corroborates Norin's inference that late Tertiary crustal shortening has occurred in this area by southward underthrusting of the Tarim Basin beneath the Kunlun. This study places a lower bound on the amount of underthrusting.

Lyon-Caen, H.↗

Chronologic Analysis of Terrestrial Sediments and Basin Evolution

The use of magnetic-polarity stratigraphy to provide detailed chronologies of numerous areas within a sedimentary basin is discussed. Sediments suitable for magnetostratigraphic studies are identified. Sets of figures intended to illustrate some of the applications of magnetic-polarity stratigraphy to various aspects of basin analysis are given. Most of the examples are drawn from the Himalayan molasse (Indo-Gangetic foredeep) in northern Pakistan and northwestern India. Each of the figures illustrates an example of how detailed chronologies can be utilized in enhancing and refining models of basin analysis and tectonic deformation.

Burbank, D.↗

Foreland Basin Structures and Remote Sensing

Rocky Mountain foreland basins are somewhat unique in that the basins may exhibit a variety of structural styles. It is generally agreed that shortening has occurred in the foreland basement but the cause is controversial: vertical vs compressional horizontal tectonics. Even when shortening is attributed to compression, the attitude (dip) of the fault plane and whether the horizontal or vertical component of movement is dominant is unconstrained. The controversy is difficult to resolve from surface data alone due to the variety of possible interpretations. Detailed surface mapping and geologic modeling are needed to constrain subsurface interpretations. In many areas of the Wind River and Bighorn basins detailed geologic maps do not exist. State-of-the-art remote sensing data could potentially provide an efficient means of mapping surface geology. State-of-the-art remote sensing systems now provide geometrically correct data at 30 meter pixel size and increased spectral coverage, capable of more detailed geologic analyses. These data can be photographically enlarged to 1:24,000 scale and combined with 7 1/2' uses topographic quads to provide an excellent base map for geologic interpretations.

Paylor, E. D.↗

A study of tectonic activity in the Basin-Range Province and on the San Andreas Fault. No. 2: Lithospheric structure, seismicity, and contemporary deformation of the United States Cordillera

The structural evolution of the U.S. Cordillera has been influenced by a variety of tectonic mechanisms including passive margin rifting and sedimentation; arc volcanism; accretion of exotic terranes; intraplate magmatism; and folding and faulting associated with compression and extension processes that have profoundly influenced the lithospheric structure. As a result the Cordilleran crust is laterally inhomogeneous across its 2000 km east-west breadth. It is thin along the West Coast where it has close oceanic affinities. The crust thickens eastward beneath the Sierra Nevada, then thins beneath the Basin-Range. Crustal thickening continues eastward beneath the Colorado Plateau, the Rocky Mountains, and the Great Plains. The total lithospheric thickness attains 65 km in the Basin-Range and increases eastward beneath the Colorado Plateau. The upper-crust, including the crystalline basement of the Cordillera, has P sub G velocities of 6 km/s in the Basin-Range and Rio Grande Rift. Lower P sub G velocities of 5.4 to 5.7 km/s are associated with the youthful Yellowstone, Valles and Long Valley calderas and the Franciscan assemblage of the western coastal margin. Averaged crustal velocity reflects integrated tectonic evolution of the crust-thick silicic bodies, velocity reversals, and a thin crust produce low averaged velocities that are characteristic of a highly attenuated and thermally deformed crust.

Smith, R. B.↗

Evaluation of the satellite derived snow cover area - Runoff forecasting models for the inaccessible basins of western Himalayas

In this study, the existing seasonal snow cover area runoff forecasting models of the Indus, Kabul, Sutlej and Chenab basins were evaluated with the concurrent flow correlation model for the period 1975-79. In all the basins under study, correlation of concurrent flow model explained the variability in flow better than by the snow cover area runoff models. Actually, the concurrent flow correlation model explained more than 90 percent of the variability in the flow of these rivers. Compared to this model, the snow cover area runoff models explained less of the variability in flow. In the Himalayan river basins under study and at least for the period under observation, the concurrent flow correlation model provided a set of results with which to compare the estimates from the snow cover area runoff models.

Dey, B.↗

Extension of continental lithosphere - A model for two scales of basin and range deformation

The development of a model for deformation in an extending continental lithosphere that is stratified in density and strength is described. The lithosphere model demonstrates that the necking instabilities at two wavelengths originate due to a strong upper crust, a mantle layer, and a weak lower crust. It is observed that the dominant wavelengths of necking are controlled by layer thickness and the strength of the layers control the amplitude of the instabilities. The model is applied to the Basin and Range Province of the western U.S. where deformations in ranges and tile domains are detected. The relation between the Bouguer gravity anomaly and the deformations is studied. The data reveal that the horizontal scale of short wavelength necking correlates with the spacings of individual basins and ranges, and the longer wavelength corresponds to the width of tilt domains. The control of the Basin and Range deformation by two scales of extensional instability is proposed.

Zuber, M. T.↗

Basalt depths in lunar basins using impact craters as stratigraphic probes: Evaluation of a method using orbital geochemical data

A rare look at the chemical composition of subsurface stratigraphy in lunar basins filled with mare basalt is possible at fresh impact craters. Mg/Al maps from orbital X-ray flourescence measurements of mare areas indicate chemical anomalies associated with materials ejected by large post-mare impacts. A method of constraining the wide-ranging estimates of mare basalt depths using the orbital MG/Al data is evaluated and the results are compared to those of investigators using different indirect methods. Chemical anomalies at impact craters within the maria indicate five locations where higher Mg/Al basalt compositions may have been excavated from beneath the surface layer. At eight other locations, low Mg/Al anomalies suggest that basin-floor material was ejected. In these two cases, the stratigraphic layers are interpreted to occur at depths less than the calculated maximum depth of excavation. In five other cases, there is no apparent chemical change between the crater and the surrounding mare surface. This suggests homogeneous basalt compositions that extend down to the depths sampled, i.e., no anorthositic material that might represent the basin floor was exposed.

Andre, C. G.↗

Boundary layer ozone - An airborne survey above the Amazon Basin

Ozone data obtained over the forest canopy of the Amazon Basin during July and August 1985 in the course of NASA's Amazon Boundary Layer Experiment 2A are discussed, and ozone profiles obtained during flights from Belem to Tabatinga, Brazil, are analyzed to determine any cross-basin effects. The analyses of ozone data indicate that the mixed layer of the Amazon Basin, for the conditions of undisturbed meteorology and in the absence of biomass burning, is a significant sink for tropospheric ozone. As the coast is approached, marine influences are noted at about 300 km inland, and a transition from a forest-controlled mixed layer to a marine-controlled mixed layer is noted.

Gregory, Gerald L.↗

Geological remote sensing of Palaeogene rocks in the Wind River Basin, Wyoming, USA

Remote sensing studies of Palaeogene sediments in the Wind River Basin (Wyoming) were used for mapping stratigraphic units, sedimentary features and facies, and structural patterns. Thematic Mapper principal component images for the central and eastern Wind River Basin along with geological investigations and spectral analyses allowed: mapping of the Fort Union, Wind River, and Wagon Bed formations (Fm) and their subunits; recognition of two subunits in the Wind River Fm, one of which can be traced for 75 km; determination of sediment source and depositional environment of units within the Wind River Fm; correlation of the Wagon Bed Fm across the basin; and apparent confirmation of different sources of volcanic debris in the western and southeastern exposures of the Wagon Bed Fm.

Krishtalka, L.↗

Geology and deposits of the lunar Nectaris basin

The geology and composition of Nectaris basin deposits have been investigated in order to provide information on the lunar basin-forming process and the regional geologic setting of the Apollo 16 landing site. Several outcrops of nearly pure anorthosite were noted in locations such as the walls of Kant crater, an inner ring of the basin, and the crater Bohnenberger F. The results suggest that the impact can be modeled as a proportional-growth crater, and that the Nectaris excavation cavity was about 470 km in diameter and as deep as 55 km.

Spudis, P. D.↗