Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Improved Quantitative Dynamic Range of Time-of-Flight Mass Spectrometry by Simultaneously Waveform-Averaging and Ion-Counting Data Acquisition

Two different types of data acquisition methods, “averaging mode” and “ion-counting mode”, have been used in a time-of-flight (TOF) mass spectrometry. The most common method is an averaging mode that sums waveform signals obtained from each flight cycle. While it is possible to process many ions arriving at the same TOF in one flight cycle, low-abundance ions are difficult to measure because ion signals are overwhelmed by noises from the detection system. An ion-counting mode is suitable for the detection of such low-concentration ions, but counting loss occurs when two or more ions arrive at the detector within the dead time of the acquisition system. In this study, we introduce a technique that combines two methods to measure target ions with a high concentration difference, i.e., averaging mode and ion-counting mode are used simultaneously for high abundant and trace ions, respectively. By processing waveforms concurrently during data acquisition, one can choose to analyze either or both types of data to achieve a highly quantitative mass spectrum over a wide range of sample concentrations. The result of the argon isotope analysis shows that this method provides a more accurate determination of the isotope ratio compared to averaging mode alone at one-twentieth of the analysis time required by ion-counting alone. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Average subentropy, coherence and entanglement of random mixed quantum states

Compact expressions for the average subentropy and coherence are obtained for random mixed states that are generated via various probability measures. Surprisingly, our results show that the average subentropy of random mixed states approaches the maximum value of the subentropy which is attained for the maximally mixed state as we increase the dimension. In the special case of the random mixed states sampled from the induced measure via partial tracing of random bipartite pure states, we establish the typicality of the relative entropy of coherence for random mixed states invoking the concentration of measure phenomenon. Our results also indicate that mixed quantum states are less useful compared to pure quantum states in higher dimension when we extract quantum coherence as a resource. This is because of the fact that average coherence of random mixed states is bounded uniformly, however, the average coherence of random pure states increases with the increasing dimension. As an important application, we establish the typicality of relative entropy of entanglement and distillable entanglement for a specific class of random bipartite mixed states. In particular, most of the random states in this specific class have relative entropy of entanglement and distillable entanglement equal to some fixed number (to within an arbitrary small error), thereby hugely reducing the complexity of computation of these entanglement measures for this specific class of mixed states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Asymptotic behaviour of time averages for non-ergodic Gaussian processes

In this work, we study the behaviour of time-averages for stationary (non-ageing), but ergodicity-breaking Gaussian processes using their representation in Fourier space. We provide explicit formulae for various time-averaged quantities, such as mean square displacement, density, and analyse the behaviour of time-averaged characteristic function, which gives insight into rich memory structure of the studied processes. Moreover, we show applications of the ergodic criteria in Fourier space, determining the ergodicity of the generalised Langevin equation’s solutions. - Highlights: Ergodic criteria for Gaussian models which use Fourier transform are provided. Smooth, field Hamiltonian models are ergodic, discrete models are non-ergodic. Fractal Fourier structure can induce recurring correlations and non-mixing. Non-ergodic models exhibit non-linear dynamics and complex constants of motion. This non-linearity can be studied using time-averaged characteristic function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical and experimental comparison of tracer particle and averaging techniques for particle velocities in a fluidized bed

Particle tracking methods using emitted radiation show potential for following motion in opaque systems such as granular materials. Leading examples are Positron Emission Particle Tracking (PEPT) and Radioactive Particle Tracking (RPT). The application of such techniques sometimes requires the use of tracer particles which differ in size, density and/or shape from the particles of interest. This study investigates the extent to which such differences affect the result of the study by using the open source MFIX-DEM software to model particle motion in the travelling fluidized bed experiments. The results are compared with previously reported experimental studies using both PEPT and RPT. Consistent numerical results were obtained for both PEPT and RPT tracer particles. In determining averaged velocities using such techniques, there is a choice to be made between averaging velocities of particles crossing a virtual plane over a period of time (the “face-average” approach) or those passing through a defined volume over time (the “volume-average” approach). The differences between results obtained with these two methods are shown to be significant in this case, for both computation and experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Turbulence-induced bias in time-averaged laser absorption tomography of correlated concentration and temperature fields with a first-order correction

The influence of correlated scalar fluctuations on time-averaged laser absorption tomography measurements of temperature and species in a piloted turbulent premixed flame was examined using a coupled spectroscopic and fluid-dynamic analysis. To understand bias associated with turbulence, spatio-temporally resolved temperature and species mole fraction profiles predicted by large eddy simulations (LES) were used to synthetically generate time-resolved line-of-sight absorption measurements at short time scales (microsecond) to reflect the unsteady nature of a canonical jet burner across various transverse measurement planes. Inversion methods were employed on the time-averaged line-of-sight data to produce radially-resolved temperature and mole fraction profiles, analogous to those produced by laser absorption tomography performed on a time-averaged axisymmetric flowfield. It is shown that bias in the measurements compared to true time-averaged scalar fields is a function primarily of temperature dependence in absorptivity and non-zero correlation between temperature and species concentration scalars. Finally, a first-order correction to tomography measurements is proposed to account for the bias based on estimated correlations and the known spectroscopic parameters of the probed absorption transitions.

42 ENGINEERING↗

The photocatalytic performance of Ta and Rh co-doped TiO2 tuned by the average dopant valence

Highlights: • Effects of dopant valence on the photocatalytic performance was investigated. • New strategy was worked out to investigate effects of dopant valence. • The dopant valence was changed but the ionic radius keeps constant. • Average valence of Rh and Ta in Ti{sub 0.96}Ta{sub 0.04−x}Rh{sub x}O{sub 2} was changed multiply. • The optimal photocatalyst was obtained as the average valence approaches +4. - Abstract: In order to reveal the effects of dopant average valence on the photocatalytic performance, Ta and Rh co-doped Ti{sub 0.96}Ta{sub 0.04−x}Rh{sub x}O{sub 2} (x = 0, 0.008, 0.016, 0.02, 0.024, 0.032, and 0.04) samples were crystallized at 450 °C and 800 °C, respectively; then the 800 °C crystallized x = 0.02 sample was subsequently reduced in the H{sub 2}/N{sub 2} mixture gases at 600, 700, 800, and 900 °C. Under different processing conditions, Ta remains the valence of +5, while the valence of Rh varies. Rh exhibits Rh{sup 3+} and Rh{sup 4+} in the 450 °C crystallized samples and is completely oxidized to Rh{sup 4+} in the 800 °C crystallized samples. In the reduced samples, Rh exists in the forms of Rh, Rh{sup 3+} and Rh{sup 4+}. The optimal photocatalyst is obtained as the ratio of Rh{sup 3+}/Rh{sup 4+} is 2.11 or the average valence of doped Ta and Rh is closest to the +4 valence of substituted Ti.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scaling diode-pumped, high energy picosecond lasers to kilowatt average powers

Recent results in the development of diode-driven high energy, high repetition rate, picosecond lasers, including the demonstration of a cryogenic Yb:YAG active mirror amplifier that produces 1.5 J pulses at 500 Hz repetition rate (0.75 kW average power) are reviewed. These pulses are compressed resulting in the generation of ${\sim}5~\text{ps}$ duration, 1 J pulses with 0.5 kW average power. A full characterization of this high power cryogenic amplifier, including at-wavelength interferometry of the active region under ${>}1~\text{kW}$ average power pump conditions, is presented. An initial demonstration of operation at 1 kW average power (1 J, 1 kHz) is reported.

47 OTHER INSTRUMENTATION↗

Bounce-averaged theory in arbitrary multi-well plasmas: solution domains and the graph structure of their connections

Bounce-averaged theories provide a framework for simulating relatively slow processes, such as collisional transport and quasilinear diffusion, by averaging these processes over the fast periodic motions of a particle on a closed orbit. This procedure dramatically increases the characteristic time scale and reduces the dimensionality of the modelled system. The natural coordinates for such calculations are the constants of motion (COM) of the fast particle motion, which by definition do not change during an orbit. However, for sufficiently complicated fields – particularly in the presence of local maxima of the electric potential and magnetic field – the COM are not sufficient to specify the particle trajectory. In such cases, multiple domains in COM space must be used to solve the problem, with boundary conditions enforced between the domains to ensure continuity and particle conservation. Previously, these domains have been imposed by hand, or by recognising local maxima in the fields, limiting the flexibility of bounce-averaged simulations. Here, we present a general set of conditions for identifying consistent domains and the boundary condition connections between the domains, allowing the application of bounce-averaged theories in arbitrarily complicated and dynamically evolving electromagnetic field geometries. We also show how the connections between the domains can be represented by a directed graph, which can help to succinctly represent the trajectory bifurcation structure.

fusion plasma↗

Applications of High-Resolution Electrospray Ionization Mass Spectrometry to Measurements of Average Oxygen to Carbon Ratios in Secondary Organic Aerosols

The applicability of high resolution electrospray ionization mass spectrometry (HR ESI-MS) to measurements of the average oxygen to carbon ratio (O/C) in organic aerosols was investigated. Solutions with known average O/C containing up to 10 standard compounds representative of secondary organic aerosol (SOA) were analyzed and corresponding electrospray ionization efficiencies were quantified. The assumption of equal ionization efficiency commonly used in estimating O/C ratios of organic aerosols was found to be reasonably accurate. We found that the accuracy of the measured O/C ratios increases by averaging the values obtained from both (+) and (-) modes. A correlation was found between the ratio of the ionization efficiencies in the positive and negative ESI modes with the octanol-water partition constant, and more importantly, with the compound's O/C. To demonstrate the utility of this correlation for estimating average O/C values of unknown mixtures, we analyzed the ESI (+) and ESI (-) data for SOA produced by oxidation of limonene and isoprene and compared to online O/C measurements using an aerosol mass spectrometer (AMS). This work demonstrates that the accuracy of the HR ESI-MS methods is comparable to that of the AMS, with the added benefit of molecular identification of the aerosol constituents.

54 ENVIRONMENTAL SCIENCES↗

Average g-Factors of Anisotropic Polycrystalline Samples

Due to the lack of suitable single crystals, the average g-factor of anisotropic polycrystalline samples are commonly estimated from either the Curie-Weiss susceptibility or the saturation magnetization. We show that the average g-factor obtained from the Curie constant is always greater than or equal to the average g-factor obtained from the saturation magnetization. The average g-factors are equal only for a single crystal or an isotropic polycrystal. We review experimental results for several compounds containing the anisotropic cation [Fe(C5Me5)2]+ and propose an experiment to test this inequality using a compound with a spinless anion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Average Shape of Sea Ice Ridge Keels

Through analysis of over 64,000 ridge profiles identified from moored upward-looking sonars, we identify a well-defined average shape of pressure ridge keels that is concave or cusped, not triangular as widely assumed in other literature. On the basis of this average shape, we put forward a new, dimensional-definition, of a pressure ridge cross-section that follows a negative exponential form and allows an average pressure ridge cross section to be constructed with knowledge or choice of a single parameter. The horizonal asymptote of the profile represents the draft of the “background” ice in which the ridge is embedded. The draft of this background ice scales with keel depth and is typically greater than can be accounted through thermodynamic growth, indicating that ridges tend to be embedded in fields of mechanically thickened rubble. Using a variational ridge model we simulated keel shapes for a range of ridge building conditions. Here, the model results agree well with the observations and indicate the cusped shape of an average ridge profile arises from the varying angle of horizontal shear in the ice cover when ridges form. The modeling results also explain the elongated tail of the area draft distribution of the pack.

54 ENVIRONMENTAL SCIENCES↗

Time‐And‐Space Averaging Applied to Intermittent Multiphase Flow Experiments

Abstract Various researchers have studied fluctuations in pore‐scale phase occupancy during multiphase flow in porous media using synchrotron‐based X‐ray microcomputed tomography (micro‐CT). However, the impact of these fluctuations on the concept of a representative volume is not yet fully understood. In this study, we performed spatial and temporal averaging of multiphase flow experiments visualized with synchrotron‐based micro‐CT, focusing on oil saturation as the key parameter to determine a representative time‐and‐space average. Our findings revealed that a saturation value representative of both time and space was achieved during fractional flow experiments in drainage mode with fractional flows of 0.8, 0.5, and 0.3. Furthermore, we computed a range of relative permeabilities on the basis of whether momentaneous saturation or time‐and‐space averaged saturation was utilized for direct simulation. Our results highlighted the importance of time‐and‐space averaging in determining a representative relative permeability and indicated that the temporal and spatial scales covered in a typical micro‐CT flow experiment were sufficient to obtain a representative saturation value for sandstone rock under intermittent flow conditions.

Environmental Sciences & Ecology↗

Improved uranium isotopic ratio determinations for the liquid sampling-atmospheric pressure glow discharge orbitrap mass spectrometer by use of moving average processing

The liquid sampling-atmospheric pressure glow discharge (LS-APGD) is a versatile combined atomic and molecular (CAM) ionization source capable of ionizing elemental species, small polar compounds, low-polarity polycyclic aromatic hydrocarbons, and proteins. While the LS-APGD has been proven capable of determining the 235U/238U isotope ratio in enriched and natural uranium, recent efforts have strived to reduce the analysis time of individual measurements by employing higher-order data processing techniques, specifically, moving average methods. Additionally, the use of a moving average (of data windows of various widths) improves the precision of the ratio measurements and reduces the number of scans needed to be collected to generate high-precision results. Additionally, use of the moving average minimizes the quantity of sample that needs to be analyzed while reducing the measurement time. These reductions have allowed isotope ratio (IR) determinations to be made using injections instead of direct infusion of the analyte. For example, employing a 40-point window width in the moving average to direct infusion data reduced the percent relative standard deviation (% RSD) of the 235U/238U values from 3.4% to 0.5%. For the injection of a 100 μL aliquot, the % RSD was reduced from 5.3% to 0.7%.

74 ATOMIC AND MOLECULAR PHYSICS↗

Average local ionization energy generalized to correlated wavefunctions

The average local ionization energy function introduced by Politzer and co-workers [Can. J. Chem. 68, 1440 (1990)] as a descriptor of chemical reactivity has a limited utility because it is defined only for one-determinantal self-consistent-field methods such as the Hartree–Fock theory and the Kohn–Sham density-functional scheme. We reinterpret the negative of the average local ionization energy as the average total energy of an electron at a given point and, by rewriting this quantity in terms of reduced density matrices, arrive at its natural generalization to correlated wavefunctions. The generalized average local electron energy turns out to be the diagonal part of the coordinate representation of the generalized Fock operator divided by the electron density; it reduces to the original definition in terms of canonical orbitals and their eigenvalues for one-determinantal wavefunctions. The discussion is illustrated with calculations on selected atoms and molecules at various levels of theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rotational averaging of multiphoton absorption cross sections

Rotational averaging of tensors is a crucial step in the calculation of molecular properties in isotropic media. We present a scheme for the rotational averaging of multiphoton absorption cross sections. We extend existing literature on rotational averaging to even-rank tensors of arbitrary order and derive equations that require only the number of photons as input. In particular, we derive the first explicit expressions for the rotational average of five-, six-, and seven-photon absorption cross sections. This work is one of the required steps in making the calculation of these higher-order absorption properties possible. The results can be applied to any even-rank tensor provided linearly polarized light is used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Orbit-averaged quantities, the classical Hellmann-Feynman theorem, and the magnetic flux enclosed by gyro-motion

Action integrals are often used to average a system over fast oscillations and obtain reduced dynamics. It is not surprising, then, that action integrals play a central role in the Hellmann-Feynman theorem of classical mechanics, which furnishes the values of certain quantities averaged over one period of rapid oscillation. This paper revisits the classical Hellmann-Feynman theorem, rederiving it in connection to an analogous theorem involving the time-averaged evolution of canonical coordinates. We then apply a modified version of the Hellmann-Feynman theorem to obtain a new result: the magnetic flux enclosed by one period of gyro-motion of a charged particle in a non-uniform magnetic field. These results further demonstrate the utility of the action integral in regards to obtaining orbit-averaged quantities and the usefulness of this formalism in characterizing charged particle motion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Site-specific dissociation dynamics of H{sub 2}/D{sub 2} on Ag(111) and Co(0001) and the validity of the site-averaging model

Dissociative chemisorption of polyatomic molecules on metal surfaces involves high-dimensional dynamics, of which quantum mechanical treatments are computationally challenging. A promising reduced-dimensional approach approximates the full-dimensional dynamics by a weighted average of fixed-site results. To examine the performance of this site-averaging model, we investigate two distinct reactions, namely, hydrogen dissociation on Co(0001) and Ag(111), using accurate first principles potential energy surfaces (PESs). The former has a very low barrier of ∼0.05 eV while the latter is highly activated with a barrier of ∼1.15 eV. These two systems allow the investigation of not only site-specific dynamical behaviors but also the validity of the site-averaging model. It is found that the reactivity is not only controlled by the barrier height but also by the topography of the PES. Moreover, the agreement between the site-averaged and full-dimensional results is much better on Ag(111), though quantitative in neither system. Further quasi-classical trajectory calculations showed that the deviations can be attributed to dynamical steering effects, which are present in both reactions at all energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance learning estimator for the site-averaged turnover frequency of a disordered solid catalyst

For disordered catalysts such as atomically dispersed “single-atom” metals on amorphous silica, the active sites inherit different properties from their quenched-disordered local environments. The observed kinetics are site-averages, typically dominated by a small fraction of highly active sites. Standard sampling methods require expensive ab initio calculations at an intractable number of sites to converge on the siteaveraged kinetics. We present a new method that efficiently estimates the site-averaged turnover frequency (TOF). The new estimator uses the same importance learning algorithm [Vandervelden et al., React. Chem. Eng. 5, 77 (2020)] that we previously used to compute the siteaveraged activation energy. We demonstrate the method by computing the site-averaged TOF for a simple disordered lattice model of an amorphous catalyst. The results show that with the importance learning algorithm, the site-averaged TOF and activation energy can now be obtained concurrently with orders of magnitude reduction in required ab initio calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗