Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attenuator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Nonmagnetized Collisional Plasma Parameter Estimation From Two Frequency Signal Interrogation Attenuation

A nonmagnetized collisional plasma parameter estimator from two frequency signal interrogation attenuation is developed. The plasma parameters that are estimated are the plasma frequency, electron neutral momentum collision frequency, and the plasma thickness. The plasma frequency and electron neutral momentum collision frequency are considered uniform across the plasma thickness. The relative permittivity is defined, and the complex index of refraction is developed. Using this definition and applying the plasma frequency, electron neutral momentum collision frequency, the radial propagation frequency, and plasma thickness, an attenuation is determined for known cases. The development of the estimator is discussed. The estimator uses a performance index where the minimum difference between the plasma frequencies and electron neutral momentum collision frequencies is determined for the two signal interrogation frequencies under the constraint of the same plasma thickness. The estimator was developed in three stages which include iterative, sequential, and adaptive. The setups of the iterative, sequential, and adaptive approaches are discussed. The impact of the interrogation frequency and the estimator setup is investigated. The estimator in the three development stages is compared with known cases and the plasma parameter estimator performance is quantified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Deletion of the A137R Gene from the Pandemic Strain of African Swine Fever Virus Attenuates the Strain and Offers Protection against the Virulent Pandemic Virus

African swine fever virus (ASFV) is causing a devastating pandemic in domestic and wild swine within an extended geographical area from Central Europe to East Asia, resulting in economic losses for the regional swine industry. There are no commercial vaccines; therefore, disease control relies on identification and culling of infected animals. We report here that the deletion of the ASFV gene A137R from the highly virulent ASFV-Georgia2010 (ASFV-G) isolate induces a significant attenuation of virus virulence in swine. A recombinant virus lacking the A137R gene, ASFV-G-DA137R, was developed to assess the role of this gene in ASFV virulence in domestic swine. Animals inoculated intramuscularly with 102 50% hemadsorption doses (HAD50) of ASFV-G-DA137R remained clinically healthy during the 28-day observational period. All animals inoculated with ASFV-G-DA137R had medium to high viremia titers and developed a strong virus-specific antibody response. Importantly, all ASFV-G-DA137Rinoculated animals were protected when challenged with the virulent parental strain ASFV-G. No evidence of replication of challenge virus was observed in the ASFV-GDA137R-inoculated animals. Therefore, ASFV-G-DA137R is a novel potential live attenuated vaccine candidate and one of the few experimental vaccine strains reported to induce protection against the highly virulent ASFV Georgia virus that is the cause of the current Eurasian pandemic.

59 BASIC BIOLOGICAL SCIENCES↗

Compensating attenuation effects in full-waveform inversion with dissipation-dispersion decoupling

Seismic attenuation poses challenges to velocity model building from acoustic/elastic full-waveform inversion (FWI). In particular, when constructing the FWI gradient for velocity inversion, recent studies have indicated that the high-attenuation structure could distort the gradient by damping the amplitudes and shifting the kinematic phases, resulting in an imbalanced update and thus unreliable velocity model. These Q effects are particularly significant in the reflection acquisition geometry due to the “double-damping” issue. Here, we develop a Q-compensated FWI algorithm for constructing a Q-free FWI gradient. By using a recently developed viscoacoustic wave propagator, this compensation can be done conveniently by keeping the dispersion term and flipping the dissipation term in the wave equation when we simulate the forward and time-reversed adjoint wavefields. The resultant gradient obtained by interacting these two wavefields has correct kinematics and Q-free amplitudes. This Q-compensated FWI can balance the update between Q- and no- Q-areas, which we determine using synthetic examples. In addition, we illustrate how to take advantage of the dissipation-dispersion decoupling to determine the anomalous Q value in the Q model building workflow via Q-compensated reverse time migration.

Geochemistry & Geophysics↗

Nitrate and Nitrite at Hanford – From Tanks to Natural Attenuation

Washington River Protection Solutions, LLC (WRPS) contracted Pacific Northwest National Laboratory (PNNL) in support of their maturation testing and analysis to develop and deploy an ambient temperature solidification/stabilization process for low-activity waste (LAW) (referred to as “grout” in this report). The intent of this effort is to support a sample-and-send regulatory and processing strategy in the Hanford 200 West Area, specifically considering grout waste forms disposal at Hanford in the Integrated Disposal Facility (IDF). Currently the disposal of grouted LAW is not an option because the IDF is not permitted to receive this waste form. The material presented in this report is intended to help inform the U.S. Department of Energy (DOE), the site operating contractors, regulatory agencies, and stakeholders of the future implications of IDF disposal of a grouted LAW waste form, specifically for the behavior of nitrate (NO 3 - ) and nitrite (NO 2 - ) at the Hanford. The only calculation of nitrate release from a hypothetical grouted LAW inventory in the IDF showed that the overall release was slightly above the compliance limit of 45 mg/L nitrate and 3.32 mg/L nitrate after 1000 years (Asmussen et al. 2019). As such, uncertainty around the impact of nitrate and nitrite release from the IDF was identified in the recent National Academies of Sciences study of Hanford supplemental LAW by both the national laboratory team and Hanford stakeholders (Bates et al. 2023). However, these calculations (and others for the IDF involving secondary waste grout) may be conservative as no nitrate and nitrite retention in the grout waste form was assumed, nor any attenuation in the subsurface. There is evidence from the literature of processes that can attenuate nitrate migration both in the waste form and in the Hanford subsurface. If found to be technically defensible and likely to occur in the IDF and associated subsurface, then these processes should be included in modeling of the IDF to represent the behavior of nitrate and nitrite more accurately. Doing so would remove unnecessary conservatism in the modeling projections and reduce the uncertainty in assessments of facility compliance of a grouted LAW waste form in the IDF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Wet-radome attenuation in ARM cloud radars and its utilization in radar calibration using disdrometer measurements

Abstract. A relative calibration technique has been developed for the US Department of Energy's (DOE's) Atmospheric Radiation Measurement (ARM) user facility Ka-band ARM Zenith Radars (KAZRs). This method uses the signal attenuation caused by water on the radome to estimate reflectivity factor (Ze) offsets. The wet-radome attenuation (WRA) is assumed to follow a log-linear relationship with rainfall rate during light and moderate rain, as measured by a collocated surface disdrometer. The technique has an uncertainty of approximately 3 dB, due to factors such as disdrometer measurement error, rain variability between radar and disdrometer sample volumes, and the fitting function's uncertainty for the WRA behavior. A practical advantage of this WRA-based approach to shorter-wavelength radar monitoring is that, while it requires a reference disdrometer, it proves feasible for a wider range of collocated disdrometer measurements compared to traditional direct disdrometer comparison at the onset of light rain. This technique thus offers a cost-effective monitoring tool for remote or long-term radar deployments. This calibration technique was applied during the ARM Tracking Aerosol Convection Interactions Experiment (TRACER) from October 2021 through September 2022. The estimated Ze offsets were compared against traditional radar calibration and monitoring methods using available datasets from this campaign. Results show that the WRA-based offsets align closely with mean offsets found between cloud radars and from direct disdrometer comparison near the onset of rain, while also reflecting similar offset and campaign-long trends when compared to collocated, independently calibrated radar wind profilers. Nevertheless, overall, the KAZR Ze offsets estimated during TRACER remained stable at approximately 2 dB lower than the disdrometer estimates from the campaign start until the end of June 2022; afterward, the offsets increased to around 7 dB by the campaign's end. This increase is linked to a drop of about 1 dB in transmitter power toward the end of the project.

54 ENVIRONMENTAL SCIENCES↗

A compact rotary vane attenuator

Rotary vane attenuator, when used as a front end attenuator, introduces an insertion loss that is proportional to the angle of rotation. New technique allows the construction of a shortened compact unit suitable for most installations.

Nixon, D. L.↗

Ferrite attenuator modulation improves antenna performance

Ferrite attenuator inserted into appropriate waveguide reduces the gain of the antenna element which is causing interference. Modulating the ferrite attenuator to change the antenna gain at the receive frequency permits ground tracking until the antenna is no longer needed.

Hooks, J. C.↗

Docking-mechanism attenuator with electromechanical damper

Theoretical and practical problems involved in the application of electromechanical damping for spacecraft docking-mechanism attenuation are discussed. Some drawbacks of hydraulic dampers used for the purpose are pointed out. The basic scheme of the attenuator with the electromechanical damper is given.

Syromyatnikov, V. S.↗

Investigation of the tone-burst tube for duct lining attenuation measurement

The tone burst technique makes practical the laboratory evaluation of potential inlet and discharge duct treatments. Tone burst apparatus requires only simple machined parts and standard components. Small, simply made, lining samples are quickly and easily installed in the system. Two small electromagnetric loudspeaker drivers produce peak sound pressure level of over 166 db in the 3-square-inch sample duct. Air pump available in most laboratories can produce air flows of over plus and minus Mach 0.3 in the sample duct. The technique uses short shaped pulses of sound propagated down a progressive wave tube containing the sample duct. The peak pressure level output of the treated duct is compared with the peak pressure level output of a substituted reference duct. The difference between the levels is the attenuation or insertion loss of the treated duct. Evaluations of resonant absorber linings by the tone burst technique check attenuation values predicted by empirical formulas based on full scale ducts.

Soffel, A. R.↗

The prediction of millimeter wavelength precipitation attenuation using a cylindrical storm cell model

The single terminal and two terminal diversity precipitation attenuation distributions are calculated for a millimeter wavelength earth-satellite propagation path. The calculated probability distributions are compared to attenuation probability distributions measured at two locations with the ATS-5 millimeter wavelength experimental 15.63 GHz downlink. Using an empirically derived three mode exponential cell diameter-rain rate function, the calculated distributions agreed within -2 to +1 db of the measured distributions for both terminal locations. The sensitivity of the calculated distribution to variations of the cell model parameters was also investigated.

Zintsmaster, L. R.↗

Ultrasonic attenuation in superconducting molybdenum-rhenium alloys.

Investigation of longitudinal sound attenuation in superconducting Mo-Re alloys as a function of temperature, magnetic field, and frequency. Evaporated thin film CdS transducers were used for the measurements at frequencies up to 3 GHz. The normal state attenuation coefficient was found to be proportional to the square of frequency over this frequency range. Measurements in zero magnetic field yielded a value of the energy gap parameter close to the threshold value of 3.56 kTc, appropriate to a weakly coupled dirty limit superconductor.

Ashkin, M.↗

The attenuation of Love waves and toroidal oscillations of the earth.

An attempt has been made to invert a large set of attenuation data for Love waves and toroidal oscillations in the earth, using a recent method by Backus and Gilbert. The difficulty in finding an acceptable model of internal friction which explains the data, under the assumption that the internal friction is independent of frequency, casts doubt on the validity of this assumption. A frequency-dependent model of internal friction is presented which is in good agreement with the seismic data and with recent experimental measurements of attenuation in rocks.

Jackson, D. D.↗

Experimental and theoretical investigation of stress wave attenuation in fiber reinforced composites.

The propagation of an initialrcidrical pressure pulse through a linear elastic fiber reinforced composite medium is analysed, both experimentally and analytically. In the experiment, tests were performed on plates with single and multiple circular inclusions embedded in a matrix of lower characteristic impedance. Sharp compression pulses were generated at an edge of the plate. Strain gages were mounted on various positions of the plate to determine the attenuation of the transient stress in the fiber reinforced composite. The qualitative analytical treatment is based on the methods of propagating stress discontinuities. Computer programs were written to numerically determine the changes in the shape of the leading wave front and the stresses immediately behind it. Experimental results for the attenuation of stress wave on steel-aluminum and steel-brass fiber-matrix composites compared very well with the computed analytical results when the applied pressure is generated by small explosive charges. The results did not compare well when the applied pressure is generated by projectile impact.

Yang, J. C. S.↗

The attenuation of X-rays emitted by supernovae

The attenuation of X-rays in Arnett's C-12 detonation supernova model is computed. The attenuation of X-rays in the filaments of the Crab Nebula is computed using a model for the filaments by Woltjer and a model by Davidson and Tucker. An empirical expression by Gorenstein, Kellogg, and Gursky for the optical thickness of the interstellar medium for three supernova remnants is analyzed.

Schocken, K.↗

Attenuation and phase dispersion in the atmosphere due to the microwave spectrum of oxygen

Radio wave propagation in the 40- to 140-GHz band through the earth's atmosphere is strongly influenced by the behavior of the O2 microwave spectrum. This behavior causes the transfer function to depend critically upon altitude. The spectroscopic properties of O2 are discussed and reduced to engineering formulas expressing attenuation and phase dispersion rates in terms of frequency and meteorological parameters. The theory is supported on several accounts by reliable spectroscopic measurements. Pressure scanning spectroscopy is used to investigate the O2 microwave spectrum under simulated atmospheric conditions. The application of spectroscopic information to analytical treatments of transfer properties for inhomogeneous slant paths is demonstrated. Attenuation and phase dispersion between 49 and 72 GHz are evaluated for zenith and tangential paths.

Liebe, H. J.↗

Sonic inlet noise attenuation and performance with a J-85 turbojet engine as a noise source

A static test program was conducted to investigate aerodynamic and acoustic performance of a sonic inlet used as a noise suppressor. A translating centerbody type inlet with radial vanes was tested ahead of a J85-GE-13 turbojet engine. The inlet when fully choked, maintained high recovery with low distortions while dramatically reducing noise emanating from the compressor. Recoveries of 98.1% at simulated takeoff and 95% at approach were attained with associated sound attenuation of 40 db and 38 db respectively. Inlet lip shape was found to have significant effects on noise attenuation at these static conditions.

Groth, H. W.↗

Variable CO2 laser attenuator

An infrared wavelength variable attenuator based on contra-rotating germanium wedges is examined theoretically. The device redirects the paths of internal reflections associated with an optical flat to avoid closely spaced parallel beams at the output. Complementary wedges separated by an air gap compose an optical flat which, when combined with a masking arrangement, restricts unwanted reflections. A model of the device was built and experimentally evaluated. The results compare favorably with the dynamic range of attenuation of 2 to 50 db from theoretical calculations, and show a substantial reduction in the etalon effect associated with pairs of optical flats.

Klein, B. J.↗