Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “algebraic methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

An approximate solution for interlaminar stresses in laminated composites: Applied mechanics program

An approximate solution for interlaminar stresses in finite width, laminated composites subjected to uniform extensional, and bending loads is presented. The solution is based upon the principle of minimum complementary energy and an assumed, statically admissible stress state, derived by considering local material mismatch effects and global equilibrium requirements. The stresses in each layer are approximated by polynomial functions of the thickness coordinate, multiplied by combinations of exponential functions of the in-plane coordinate, expressed in terms of fourteen unknown decay parameters. Imposing the stationary condition of the laminate complementary energy with respect to the unknown variables yields a system of fourteen non-linear algebraic equations for the parameters. Newton's method is implemented to solve this system. Once the parameters are known, the stresses can be easily determined at any point in the laminate. Results are presented for through-thickness and interlaminar stress distributions for angle-ply, cross-ply (symmetric and unsymmetric laminates), and quasi-isotropic laminates subjected to uniform extension and bending. It is shown that the solution compares well with existing finite element solutions and represents an improved approximate solution for interlaminar stresses, primarily at interfaces where global equilibrium is satisfied by the in-plane stresses, but large local mismatch in properties requires the presence of interlaminar stresses.

Rose, Cheryl A.↗
NASA NTRS1996

Numerical Modeling of Spray Combustion with an Unstructured-Grid Method

The present unstructured-grid method follows strictly the basic finite volume forms of the conservation laws of the governing equations for the entire flow domain. High-order spatially accurate formulation has been employed for the numerical solutions of the Navier-Stokes equations. A two-equation k-epsilon turbulence model is also incorporated in the unstructured-grid solver. The convergence of the resulted linear algebraic equation is accelerated with preconditioned Conjugate Gradient method. A statistical spray combustion model has been incorporated into the present unstructured-grid solver. In this model, spray is represented by discrete particles, rather than by continuous distributions. A finite number of computational particles are used to predict a sample of total population of particles. Particle trajectories are integrated using their momentum and motion equations and particles exchange mass, momentum and energy with the gas within the computational cell in which they are located. The interaction calculations are performed simultaneously and eliminate global iteration for the two-phase momentum exchange. A transient spray flame in a high pressure combustion chamber is predicted and then the solution of liquid-fuel combusting flow with a rotating cup atomizer is presented and compared with the experimental data. The major conclusion of this investigation is that the unstructured-grid method can be employed to study very complicated flow fields of turbulent spray combustion. Grid adaptation can be easily achieved in any flow domain such as droplet evaporation and combustion zone. Future applications of the present model can be found in the full three-dimensional study of flow fields of gas turbine and liquid propulsion engine combustion chambers with multi-injectors.

Shang, H. M.↗
NASA NTRS1990

Nonlinear analysis of compressively loaded linked-plate structures

A method is presented for the geometrically nonlinear analysis of the equilibrium behavior of a general class of compressively loaded, prismatic, linked-plate structures. The semi-analytical method accounts for geometric shape imperfections, and allows the use of laminated composite plate properties. Buckling eigenfunctions are used as displacement shape functions, and the associated second-order displacement fields are incorporated. The nonlinear plate equilibrium equations are expressed in terms of the assumed displacement form, and the Galerkin method is used to obtain a set of algebraic equations which are nonlinear in the modal amplitudes and the load parameter. Buckling eigensolutions for the class of structures under consideration can be obtained from the VIPASA computer code; thus, subject to some additional restrictions in loading and plate anisotropy, structural configurations which can be analyzed with regard to buckling response by VIPASA can be analyzed with regard to geometrically nonlinear response using the new method.

Stoll, Frederick↗
NASA NTRS1989

Efficient computer algebra algorithms for polynomial matrices in control design

The theory of polynomial matrices plays a key role in the design and analysis of multi-input multi-output control and communications systems using frequency domain methods. Examples include coprime factorizations of transfer functions, cannonical realizations from matrix fraction descriptions, and the transfer function design of feedback compensators. Typically, such problems abstract in a natural way to the need to solve systems of Diophantine equations or systems of linear equations over polynomials. These and other problems involving polynomial matrices can in turn be reduced to polynomial matrix triangularization procedures, a result which is not surprising given the importance of matrix triangularization techniques in numerical linear algebra. Matrices with entries from a field and Gaussian elimination play a fundamental role in understanding the triangularization process. In the case of polynomial matrices, matrices with entries from a ring for which Gaussian elimination is not defined and triangularization is accomplished by what is quite properly called Euclidean elimination. Unfortunately, the numerical stability and sensitivity issues which accompany floating point approaches to Euclidean elimination are not very well understood. New algorithms are presented which circumvent entirely such numerical issues through the use of exact, symbolic methods in computer algebra. The use of such error-free algorithms guarantees that the results are accurate to within the precision of the model data--the best that can be hoped for. Care must be taken in the design of such algorithms due to the phenomenon of intermediate expressions swell.

Baras, J. S.↗
NASA NTRS1976

Computation and sensitivity considerations of the Ricatti equation in spacecraft CMG steering laws

The steady-state matrix Ricatti equation is studied with respect to sensitivity and computational burden for a linear regulator controller in spacecraft. The class of systems studied use control moment gyros (CMGs) as the torque driver, assuming that the CMGs are free of gimbal stops. Different solution techniques are evaluated relative to computation time and accuracy to determine which solution method is most acceptable with respect to the prescribed requirements. It is shown that it is not feasible to eliminate off-diagonal Ricatti equation terms in the relevent updata equation due to their high sensitivity, that Potter's algebraic technique requires the least computation time of the methods studied, and that the simple Euler method yields the best results when accuracy and computation time are equally weighted. If an optimal linear regulator formulation is employed, a full Ricatti equation solution of n(n + 1)2 elements of the symmetric positive definite gain matrix which is the solution to the matrix Ricatti equation must be computed at each update cycle.

Colburn, B. K.↗
NASA NTRS1986

Elliptic generation of composite three-dimensional grids about realistic aircraft

An elliptic method for generating composite grids about realistic aircraft is presented. A body-conforming grid is first generated about the entire aircraft by the solution of Poisson's differential equation. This grid has relatively coarse spacing, and it covers the entire physical domain. At boundary surfaces, cell size is controlled and cell skewness is nearly eliminated by inhomogeneous terms, which are found automatically by the program. Certain regions of the grid in which high gradients are expected, and which map into rectangular solids in the computational domain, are then designated for zonal refinement. Spacing in the zonal grids is reduced by adding points with a simple, algebraic scheme. Details of the grid-generation method are presented along with results of the present application, a wing/body configuration based on the F-16 fighter aircraft.

Sorenson, Reese L.↗
NASA NTRS2002

Computing Aerodynamic Performance of a 2D Iced Airfoil: Blocking Topology and Grid Generation

The ice accrued on airfoils can have enormously complicated shapes with multiple protruded horns and feathers. In this paper, several blocking topologies are proposed and evaluated on their ability to produce high-quality structured multi-block grid systems. A transition layer grid is introduced to ensure that jaggedness on the ice-surface geometry do not to propagate into the domain. This is important for grid-generation methods based on hyperbolic PDEs (Partial Differential Equations) and algebraic transfinite interpolation. A 'thick' wrap-around grid is introduced to ensure that grid lines clustered next to solid walls do not propagate as streaks of tightly packed grid lines into the interior of the domain along block boundaries. For ice shapes that are not too complicated, a method is presented for generating high-quality single-block grids. To demonstrate the usefulness of the methods developed, grids and CFD solutions were generated for two iced airfoils: the NLF0414 airfoil with and without the 623-ice shape and the B575/767 airfoil with and without the 145m-ice shape. To validate the computations, the computed lift coefficients as a function of angle of attack were compared with available experimental data. The ice shapes and the blocking topologies were prepared by NASA Glenn's SmaggIce software. The grid systems were generated by using a four-boundary method based on Hermite interpolation with controls on clustering, orthogonality next to walls, and C continuity across block boundaries. The flow was modeled by the ensemble-averaged compressible Navier-Stokes equations, closed by the shear-stress transport turbulence model in which the integration is to the wall. All solutions were generated by using the NPARC WIND code.

Chi, X.↗
NASA NTRS2008

Application of Fast Multipole Methods to the NASA Fast Scattering Code

The NASA Fast Scattering Code (FSC) is a versatile noise prediction program designed to conduct aeroacoustic noise reduction studies. The equivalent source method is used to solve an exterior Helmholtz boundary value problem with an impedance type boundary condition. The solution process in FSC v2.0 requires direct manipulation of a large, dense system of linear equations, limiting the applicability of the code to small scales and/or moderate excitation frequencies. Recent advances in the use of Fast Multipole Methods (FMM) for solving scattering problems, coupled with sparse linear algebra techniques, suggest that a substantial reduction in computer resource utilization over conventional solution approaches can be obtained. Implementation of the single level FMM (SLFMM) and a variant of the Conjugate Gradient Method (CGM) into the FSC is discussed in this paper. The culmination of this effort, FSC v3.0, was used to generate solutions for three configurations of interest. Benchmarking against previously obtained simulations indicate that a twenty-fold reduction in computational memory and up to a four-fold reduction in computer time have been achieved on a single processor.

Dunn, Mark H.↗
NASA NTRS1985

Algebraic grid generation using tensor product B-splines

Finite difference methods are more successful if the accompanying grid has lines which are smooth and nearly orthogonal. The development of an algorithm which produces such a grid when given the boundary description. Topological considerations in structuring the grid generation mapping are discussed. The concept of the degree of a mapping and how it can be used to determine what requirements are necessary if a mapping is to produce a suitable grid is examined. The grid generation algorithm uses a mapping composed of bicubic B-splines. Boundary coefficients are chosen so that the splines produce Schoenberg's variation diminishing spline approximation to the boundary. Interior coefficients are initially chosen to give a variation diminishing approximation to the transfinite bilinear interpolant of the function mapping the boundary of the unit square onto the boundary grid. The practicality of optimizing the grid by minimizing a functional involving the Jacobian of the grid generation mapping at each interior grid point and the dot product of vectors tangent to the grid lines is investigated. Grids generated by using the algorithm are presented.

Saunders, B. V.↗
NASA NTRS1972

The k-space formulation of the n-dimensional scattering problem

The n-dimensional scattering problem is solved by means of a k-space formulation of the field equations, thereby replacing the conventional integral equation formulation by a set of two algebraic equations in two unknowns in two spaces (the constitutive equation being an algebraic equation in x-space). These equations are solved by an iterative method with the aid of the fast Fourier transform (FFT) algorithm connecting the two spaces, requiring very simple initial approximations. Since algebraic and FFT equations are used, the number of arithmetic multiple-add operations and storage allocations required for a numerical solution are reduced from the order of N sq (for solving the matrix equations resulting from the conventional integral equations) to the order of N(log base 2 of N) and N, respectively (where N is the number of data points required for the specification of the problem). The advantage gained in speed and storage is thus of the order of N/log base 2 of N and N, respectively. This method is thus considerably more efficient than the conventional matrix method, and permits exact numerical solutions for much larger problems. Arguments are presented toward the view that the field equations are more fundamental in k-space. The details and some numerical results of the application of this method to the three-dimensional electromagnetic scattering problems are presented as an example.

Bojarski, N. N.↗
NASA NTRS1991

Development of iterative techniques for the solution of unsteady compressible viscous flows

Efficient iterative solution methods are being developed for the numerical solution of two- and three-dimensional compressible Navier-Stokes equations. Iterative time marching methods have several advantages over classical multi-step explicit time marching schemes, and non-iterative implicit time marching schemes. Iterative schemes have better stability characteristics than non-iterative explicit and implicit schemes. Thus, the extra work required by iterative schemes can also be designed to perform efficiently on current and future generation scalable, missively parallel machines. An obvious candidate for iteratively solving the system of coupled nonlinear algebraic equations arising in CFD applications is the Newton method. Newton's method was implemented in existing finite difference and finite volume methods. Depending on the complexity of the problem, the number of Newton iterations needed per step to solve the discretized system of equations can, however, vary dramatically from a few to several hundred. Another popular approach based on the classical conjugate gradient method, known as the GMRES (Generalized Minimum Residual) algorithm is investigated. The GMRES algorithm was used in the past by a number of researchers for solving steady viscous and inviscid flow problems with considerable success. Here, the suitability of this algorithm is investigated for solving the system of nonlinear equations that arise in unsteady Navier-Stokes solvers at each time step. Unlike the Newton method which attempts to drive the error in the solution at each and every node down to zero, the GMRES algorithm only seeks to minimize the L2 norm of the error. In the GMRES algorithm the changes in the flow properties from one time step to the next are assumed to be the sum of a set of orthogonal vectors. By choosing the number of vectors to a reasonably small value N (between 5 and 20) the work required for advancing the solution from one time step to the next may be kept to (N+1) times that of a noniterative scheme. Many of the operations required by the GMRES algorithm such as matrix-vector multiplies, matrix additions and subtractions can all be vectorized and parallelized efficiently.

Sankar, Lakshmi N.↗
NASA NTRS1974

Stability analysis of nonlinear systems by multiple time scaling

The asymptotic solution for the transient analysis of a general nonlinear system in the neighborhood of the stability boundary was obtained by using the multiple-time-scaling asymptotic-expansion method. The nonlinearities are assumed to be of algebraic nature. Terms of order epsilon to the 3rd power (where epsilon is the order of amplitude of the unknown) are included in the solution. The solution indicates that there is always a limit cycle which is stable (unstable) and exists above (below) the stability boundary if the nonlinear terms are stabilizing (destabilizing). Extension of the solution to include fifth order nonlinear terms is also presented. Comparisons with harmonic balance and with multiple-time-scaling solution of panel flutter equations are also included.

Morino, L.↗
NASA NTRS1983

Finite element analysis of moisture effects in graphite-epoxy composites

A numerical analysis procedure is developed for the micro-mechanical investigation of moisture effects on graphite-epoxy composites. The procedure employs a nonlinear constitutive relationship in a finite element formulation. A quasi-Newton method is used to solve the resulting nonlinear algebraic equations. The results presented indicate that the stresses at the graphite-epoxy interface have a strong dependence on moisture content, fiber spacing, and applied load.

Tobing, F. E. L.↗
NASA NTRS1983

Finite-element methods for steady solidification problems

Four Galerkin finite-element methods are tested for solving the free-boundary problem that describes steady solidification. The formulations differ in the solution method used to account for the unknown shape of the melt/solid interface, in the interphase condition (either balance of heat flux or equilibrium of temperature) distinguished for locating the interface, and in the technique used for solving the systems of algebraic equations that result from the finite-element approximations. Methods that use the melting point isotherm to locate the melt/solid interface are found more accurate and efficient than formulations based on the interfacial energy balance. Solution by a Galerkin-Newton algorithm of the free-boundary problem transformed to a fixed domain is most efficient when the field problem in each phase is made nonlinear by including radiation from the melt and solid to the surroundings.

Ettouney, H. M.↗
NASA NTRS1987

Removal of spurious modes encountered in solving stability problems by spectral methods

A technique based on the Galerkin approximation is developed to remove spurious roots arising when Chebyshev spectral methods are used to solve eigenvalue problems in hydrodynamic stability. The derivation of Galerkin-Chebyshev approximations is explained, and numerical results for the Orr-Sommerfeld equations of plane Poiseuille flow and a Blasius profile are presented in tables and compared with those obtained by the method of Zebib (1984). It is pointed out that the present method does not increase the size of the algebraic system to be solved.

Zebib, Abdelfattah↗